Russian mobile telecommunications market: players and trends

Objective of this work was to clarify the competitive situation of Russian mobile telecommunications market: who are the main players, are there many regional operators, what is the possibility of new entrants and how intensive is the competition. In the beginning the history of Russian mobile telecommunications sector is described. In the next chapter environmental factors of the market are examined with the help of PESTEL analysis. After that, players of the market are introduced to ease the following of next chapters. The main theory for this work was industry analysis of five competitive forces by Michael Porter, which is presented before the theory related industry analysis of Russian mobile telecommunications industry. Research for the industry analysis is mainly based on up-to-date articles describing Russian market. As a result of the industry analysis, competitive situation of Russian mobile telecommunications industry and the future prospects are described with the help of factors coming from the PESTEL-analysis. Finally development and future prospects for Russian 3G are reported. As a result of this work, it can be said that Russian mobile telecommunications market is not likely to maintain the growth of previous years, because the market is near saturation. According to passive SIM-cards it has already received saturated. The saturation will also make the market share game between operators more volatile. The market is dominated by three national operators that covered 88% of the income in the first half of 2007. In addition to these three, there are also several regional operators. Structure of the market is likely to consolidate.

Test automation of digital mammography device

Testing of a complex software is time consuming. Automated tools are available quite a lot for desktop applications, but for embedded systems a custom-made tool is required Building a complete test framework is a complicated task. Therefore, the test platform was built on top of an already existing tool, CANoe. CANoe is a tool for CAN bus analysis and node simulation. The functionality of CANoe was extended with LabVIEW DLL. The LabVIEW software was used for simulating hardware components of the embedded device As a result of the study, a platform was created where tests could be automated. Of the current test plan, 10 percent were automated and up to 60 percent could be automated with the current functionality.

Optimizing Mobile Java Location-Based Services in Symbian OS

This thesis evaluates methods for obtaining high performance in applications running on the mobile Java platform. Based on the evaluated methods, an optimization was done to a Java extension API running on top the Symbian operating system. The API provides location-based services for mobile Java applications. As a part of this thesis, the JNI implementation in Symbian OS was also benchmarked. A benchmarking tool was implemented in the analysis phase in order to implement extensive performance test set. Based on the benchmark results, it was noted that the landmarks implementation of the API was performing very slowly with large amounts of data. The existing implementation proved to be very inconvenient for optimization because the early implementers did not take performance and design issues into consideration. A completely new architecture was implemented for the API in order to provide scalable landmark initialization and data extraction by using lazy initialization methods. Additionally, runtime memory consumption was also an important part of the optimization. The improvement proved to be very efficient based on the measurements after the optimization. Most of the common API use cases performed extremely well compared to the old implementation. Performance optimization is an important quality attribute of any piece of software especially in embedded mobile devices. Typically, projects get into trouble with performance because there are no clear performance targets and knowledge how to achieve them. Well-known guidelines and performance models help to achieve good overall performance in Java applications and programming interfaces.

Moodle Mobile : Mejorando lo presente... plugin 'myprofile'

El proyecto trata sobre la aplicación Moodle Mobile y las posibilidades de personalización y mejoras que ofrece. Principalmente el proyecto se centra en la personalización gráfica del interfaz y en el desarrollo de un plugin que añada la funcionalidad de permitir a un usuario cambiar la fotografía de su perfil en una instalación Moodle.

Means and challenges in international operations for a Finnish mobile application provider

Master’s Thesis concentrates to means and challenges in international operations for a Finnish mobile application provider Small Planet Oy during its various company stages from founding till maturing and during macro economical phases between year 1998 and 2008. Small Planet has just celebrated its 10 year anniversary and is therefore quite an extraordinary company which has survived all the highs and lows during past ten years and which has operated in the market as long as the whole mobile application industry has existed. Master’s Thesis describes possibilities for a company’s internationalization with different entry modes like exporting, licensing, investment entry and co-operative operations which are suitable for a mobile application provider. Unsuitable entry modes like franchising or contract manufacturing are not explained. The goal has been to analyze Small Planet’s international operations and to make conclusions from the practical experiences. Analysis and conclusions shall help Small Planet in its international operations in the future and should give insight to other mobile application companies and their managers who are in the situation of planning their own international operations. Results show that the best ways for Small Planet to internationalize its operations has been the co-operation with a big domestic client and the co-operation with Finnish operator infrastructure providers which have complementary products with Small Planet. Through these co-operations Small Planet has got lot of new international clients. Same time financial risks and investment need for international operations have been low. Co-operative international sales can be the most efficient international entry mode for a mobile application provider.

Handover aspects in Unlicensed Mobile Access Technology

Fixed Mobile Convergence is the recent buzz in the field of telecommunication technology. Unlicensed Mobile Access (UMA) technology is a realistic implementation of Fixed Mobile Convergence. UMA involves communication between different types of networks. Handover is a very important issue in UMA. The study is an analysis of theoretical handover mechanism and practical test results. It includes a new proposal for handover performance test in UMA. It also provides an overview of basic handover operation on different scenarios in UMA. The practical test involves an experiment on handover performance test using network analyzers. The new proposal provides a different approach for an experimental setting on handover performance test without using network analyzers. The approach is not be implemented because of some technical problem in a network equipment in UMA. The analysis of the test results reveals that time of handover between UMA and Global System for Mobile Communication (GSM) network is similar to time of handover between inter base station controller (BSC) handover in GSM networks. The new approach is simple and provides measurement at the end point communicating entities. The study gives a general understanding of handover operation, an analysis of handover performance in UMA and specifically provides a new approach useful for further study of handover in different real world environments and scenarios.

A comprehensive model for quantum noise characterization in digital mammography.

NlmCategory="UNASSIGNED">A version of cascaded systems analysis was developed specifically with the aim of studying quantum noise propagation in x-ray detectors. Signal and quantum noise propagation was then modelled in four types of x-ray detectors used for digital mammography: four flat panel systems, one computed radiography and one slot-scan silicon wafer based photon counting device. As required inputs to the model, the two dimensional (2D) modulation transfer function (MTF), noise power spectra (NPS) and detective quantum efficiency (DQE) were measured for six mammography systems that utilized these different detectors. A new method to reconstruct anisotropic 2D presampling MTF matrices from 1D radial MTFs measured along different angular directions across the detector is described; an image of a sharp, circular disc was used for this purpose. The effective pixel fill factor for the FP systems was determined from the axial 1D presampling MTFs measured with a square sharp edge along the two orthogonal directions of the pixel lattice. Expectation MTFs were then calculated by averaging the radial MTFs over all possible phases and the 2D EMTF formed with the same reconstruction technique used for the 2D presampling MTF. The quantum NPS was then established by noise decomposition from homogenous images acquired as a function of detector air kerma. This was further decomposed into the correlated and uncorrelated quantum components by fitting the radially averaged quantum NPS with the radially averaged EMTF(2). This whole procedure allowed a detailed analysis of the influence of aliasing, signal and noise decorrelation, x-ray capture efficiency and global secondary gain on NPS and detector DQE. The influence of noise statistics, pixel fill factor and additional electronic and fixed pattern noises on the DQE was also studied. The 2D cascaded model and decompositions performed on the acquired images also enlightened the observed quantum NPS and DQE anisotropy.

Hardcopy quality parameters to ensure structures detection at digital mammography

Objective To develop procedures to ensure consistency of printing quality of digital images, by means of hardcopy quantitative analysis based on a standard image. Materials and Methods Characteristics of mammography DI-ML and general purpose DI-HL films were studied through the QC-Test utilizing different processing techniques in a FujiFilm®-DryPix4000 printer. A software was developed for sensitometric evaluation, generating a digital image including a gray scale and a bar pattern to evaluate contrast and spatial resolution. Results Mammography films showed maximum optical density of 4.11 and general purpose films, 3.22. The digital image was developed with a 33-step wedge scale and a high-contrast bar pattern (1 to 30 lp/cm) for spatial resolution evaluation. Conclusion Mammographic films presented higher values for maximum optical density and contrast resolution as compared with general purpose films. The utilized digital processing technique could only change the image pixels matrix values and did not affect the printing standard. The proposed digital image standard allows greater control of the relationship between pixels values and optical density obtained in the analysis of films quality and printing systems.

Screening of breast lesions: a comparative study between mammography, B-mode ultrasonography, sonoelastography and histological results

Objective To compare the capacity of mammography, sonoelastography, B-mode ultrasonography and histological analysis to differentiate benign from malignant breast lesions. Materials and Methods A total of 12 histopathologically confirmed breast lesions were documented. The lesions were assessed by means of mammography, B-mode ultrasonography and sonoelastography, and histopathological analysis was utilized as a gold standard. Sensitivity and specificity were calculated. A receiver operating characteristic (ROC) curve was constructed to evaluate the diagnostic performance of the mentioned techniques. Results Sensitivity and specificity in the differentiation between benign and malignant lesions were respectively 100% and 50% for mammography, 100% and 71% for B-mode ultrasonography, and 67% and 83% for sonoelastography. The area under the ROC curve was calculated for the three imaging modalities and corresponded to 0.792 for mammography, 0.847 for B-mode ultrasonography, and 0.806 for sonoelastography. Conclusion Sonoelastography demonstrated higher specificity and lower sensitivity as compared with mammography and B-mode ultrasonography. On the other hand, B-mode ultrasonography had the largest area under the ROC curve. Sonoelastography has demonstrated to be a promising technique to detect and evaluate breast lesions, and could potentially reduce the number of unnecessary biopsies.

Complete internal audit of a mammography service in a reference institution for breast imaging

Objective Undertaking of a complete audit of the service of mammography, as recommended by BI-RADS®, in a private reference institution for breast cancer diagnosis in the city of São Paulo, SP, Brazil, and comparison of results with those recommended by the literature. Materials and Methods Retrospective, analytical and cross-sectional study including 8,000 patients submitted to mammography in the period between April 2010 and March 2011, whose results were subjected to an internal audit. The patients were followed-up until December 2012. Results The radiological classification of 7,249 screening mammograms, according to BI-RADS, was the following: category 0 (1.43%), 1 (7.82%), 2 (80.76%), 3 (8.35%), 4 (1.46%), 5 (0.15%) and 6 (0.03%). The breast cancer detection ratio was 4.8 cases per 1,000 mammograms. Ductal carcinoma in situ was found in 22.8% of cases. Positive predictive values for categories 3, 4 and 5 were 1.3%, 41.3% and 100%, respectively. In the present study, the sensitivity of the method was 97.1% and specificity, 97.4%. Conclusion The complete internal audit of a service of mammography is essential to evaluate the quality of such service, which reflects on an early breast cancer detection and reduction of mortality rates.

Análisis del entorno colaborativo creado para una experiencia de mobile learning

Se presentan los resultados de una investigación sobre las concepciones y usos de dispositivos móviles de un grupo de estudiantes que trabajaron en un entorno de aprendizaje colaborativo como parte un proceso de e-learning. Se emplearon dos métodos de investigación, en primer lugar el análisis del contenido de los mensajes de un foro de discusión enviados durante todo el curso, para recoger datos acerca del uso y la valoración que hacían del proceso de mobile learning. Posteriormente, mediante las entrevistas en profundidad, se analizó la percepción de mobile learning y los cambios producido durante el curso en el entorno colaborativo de aprendizaje. Los resultados indican que el entorno de intercambio creado amplifica la participación y colaboración entre los alumnos en el proceso de mobile learning, favoreciendo un mayor protagonismo de los estudiantes en una experiencia de aprendizaje online.

Landslide detection and monitoring capability of boat-based mobile laser scanning along Dieppe coastal cliffs, Normandy

Integrated in a wide research assessing destabilizing and triggering factors to model cliff dynamic along the Dieppe's shoreline in High Normandy, this study aims at testing boat-based mobile LiDAR capabilities by scanning 3D point clouds of the unstable coastal cliffs. Two acquisition campaigns were performed in September 2012 and September 2013, scanning (1) a 30-km-long shoreline and (2) the same test cliffs in different environmental conditions and device settings. The potentials of collected data for 3D modelling, change detection and landslide monitoring were afterward assessed. By scanning during favourable meteorological and marine conditions and close to the coast, mobile LiDAR devices are able to quickly scan a long shoreline with median point spacing up to 10cm. The acquired data are then sufficiently detailed to map geomorphological features smaller than 0.5m2. Furthermore, our capability to detect rockfalls and erosion deposits (>m3) is confirmed, since using the classical approach of computing differences between sequential acquisitions reveals many cliff collapses between Pourville and Quiberville and only sparse changes between Dieppe and Belleville-sur-Mer. These different change rates result from different rockfall susceptibilities. Finally, we also confirmed the capability of the boat-based mobile LiDAR technique to monitor single large changes, characterizing the Dieppe landslide geometry with two main active scarps, retrogression up to 40m and about 100,000m3 of eroded materials.