Information models used to manage engineering change: A review of the literature 2005-2010

Engineering change is a significant part of any product development programme. Changes can arise at many points throughout the product life-cycle, resulting in rework which can ripple through different stages of the design process. Managing change processes is thus a critical aspect of any design project, especially in complex design. Through a literature review, this paper shows the diversity of information models used by different change management methods proposed in the literature. A classification framework for organising these change management approaches is presented. The review shows an increase in the number of cross-domain models proposed to help manage changes.

Simulations of the SCHOLAR scramjet experiment

The DDES method is employed to investigate the complex physics involved in supersonic combustion and in particular in the SCHOLAR scramjet test case. The influence on computational results of prescribing turbulent fluctuations at the entrance to the combustion chamber is investigated. The interaction of shock waves, vortices, turbulence and combustion is studied and the existence of secondary vortices on the upper will of the combustor is proposed. © 2012 by Peter Cocks.

Measurement of the unburnt gas temperature in an IC engine by means of a pressure transducer

A novel method of measuring cylinder gas temperature in an internal combustion engine cylinder is introduced. The physical basis for the technique is that the flow rate through an orifice is a function of the temperature of the gas flowing through the orifice. Using a pressure transducer in the cylinder, and another in a chamber connected to the cylinder via an orifice, it is shown how the cylinder temperature can be determined with useful sensitivity. In this paper the governing equations are derived, which show that the heat transfer characteristics of the chamber are critical to the performance of the system, and that isothermal or adiabatic conditions give the optimum performance. For a typical internal combustion engine, it is found that the pre-compression cylinder temperature is related to the chamber pressure late in the compression process with sensitivity of the order of 0.005 bar/K. Copyright © 2010 SAE International.

Sensitivity analysis and optimization of the nuclear fuel cycle

A sensitivity study has been conducted to assess the robustness of the conclusions presented in the MIT Fuel Cycle Study. The Once Through Cycle (OTC) is considered as the base-line case, while advanced technologies with fuel recycling characterize the alternative fuel cycles. The options include limited recycling in LWRs and full recycling in fast reactors and in high conversion LWRs. Fast reactor technologies studied include both oxide and metal fueled reactors. The analysis allowed optimization of the fast reactor conversion ratio with respect to desired fuel cycle performance characteristics. The following parameters were found to significantly affect the performance of recycling technologies and their penetration over time: Capacity Factors of the fuel cycle facilities, Spent Fuel Cooling Time, Thermal Reprocessing Introduction Date, and incore and Out-of-core TRU Inventory Requirements for recycling technology. An optimization scheme of the nuclear fuel cycle is proposed. Optimization criteria and metrics of interest for different stakeholders in the fuel cycle (economics, waste management, environmental impact, etc.) are utilized for two different optimization techniques (linear and stochastic). Preliminary results covering single and multi-variable and single and multi-objective optimization demonstrate the viability of the optimization scheme.

Tissue distributions and seasonal dynamics of the hepatotoxic microcystins-LR and -RR in two freshwater shrimps, Palaemon modestus and Macrobrachium nipponensis, from a large shallow, eutrophic lake of the subtropical China

So far no information is available on microcystin (MC) contents in shrimps, prawns or crayfish from natural freshwaters. Tissue distributions and seasonal dynamics of the hepatotoxic MC-LR and -RR in two freshwater shrimps, Palaemon modestus and Macrobrachium nipponensis were studied monthly (during June-November, 2003) in a Chinese lake containing toxic cyanobacterial blooms. The shrimps P. modestus and M. nipponensis accumulated high MCs not only in the hepatopancreas (mean 4.29 and 0.53 mu g g(-1) DW, respectively) but also in the gonad (mean 1.17 and 0.48 mu g g-1 DW, respectively), and the crayfish Procambarus clarkii accumulated as much as 0.93 mu g g(-1) DW in the gonad. This indicates that gonads of these invertebrates are the second important target organ of MCs. P. modestus apparently accumulated more MCs in their organs than M. nipponensis, which might be a reflection of their difference in trophic niche. Eggs of the shrimps accumulated 8.4% (M. nipponensis, 0.27 mu g g(-1) DW) and 29.0% (P. modestus, 2.34 mu g g(-1) DW) of total toxin burden, indicating that MCs had been transferred into offspring from their adults. Among the shrimp muscle samples analyzed, 31% were above the provisional WHO TDI level, suggesting the risk of consuming shrimps in Lake Chaohu. (c) 2005 Elsevier Ltd. All rights reserved.

Temperature and pressure dependences of the copper-related green emission in ZnO microrods

We have investigated the temperature and pressure dependences of the copper-related green emission, which show fine structure at low temperature, from tetrapodlike ZnO microrods. The temperature dependence of the green emission energy follows the changes in the band gap from 10-200 K, but deviates from this behavior above 200 K. The pressure dependence of the copper-related green band (25 +/- 5 meV/GPa) is similar to that of the band gap of ZnO, and is larger than that reported previously for defect-related green emission in ZnO. (c) 2006 American Institute of Physics.

Global transposable characteristics in the complete DNA sequence of the yeast

Global transposable characteristics in the complete DNA sequence of the Saccharomyces cevevisiae yeast is determined by using the metric representation and recurrence plot methods. On the basis of the correlation distance of nucleotide strings, 16 chromosome sequences of the yeast, which are divided into 5 groups, display 4 kinds of the fundamental transposable characteristics: a short increasing period, a long increasing quasi-period, a long major value and hardly relevant.

Dynamic mechanical studies of the sulfonated butyl rubber ionomers and their blends

Dynamic mechanical properties of sulfonated butyl rubber ionomers neutralized with different amine or metallic ion (zinc or barium) and their blends with polypropylene (PP), high-density polyethylene (HDPE), or styrene-butadiene-styrene (SBS) triblock copolymer were studied using viscoelastometry. The results showed that glass transition temperatures of ion pair-containing matrix and ionic domains (T-g1 and T-g2, respectively) of amine-neutralized ionomers were lower than those of ionomers neutralized with metallic ions, and the temperature range of the rubbery plateau on the storage modulus plot for amine-neutralized ionomers was narrower. The modulus of the rubbery plateau for amine-neutralized ionomers was lower than that of ionomers neutralized with zinc or barium ion. With increasing size of the amine, the temperature range for the rubbery plateau decreased, and the height of the loss peak at higher temperature increased. Dynamic mechanical properties of blends of the zinc ionomer with PP or HDPE showed that, with decreasing ionomer content, the T-m of PP or HDPE increased and T-g1 decreased, whereas T-g2 or the upper loss peak temperature changed only slightly. The T-g1 for the blend with SBS also decreased with decreasing ionomer content. The decrease of T-g1 is attributed to the enhanced compatibilization of the matrix of the ionomer-containing ion pairs with amorphous regions of PP or HDPE or the continuous phase of SBS due to the formation of thermoplastic interpenetrating polymer networks by ionic domains and crystalline or glassy domains.

AN INFRARED SPECTROSCOPIC STUDY OF THE STRUCTURAL PHASE-TRANSITION IN THE PEROVSKITE-TYPE LAYER COMPOUND [N-C16H33NH3]2COCL4

The solid-solid phase transitions in the perovskite-type layer compound [n- C16H33NH3]2CoCl4 have been studied by infrared spectroscopy. A new phase transition at 340 K was found by comparison with differential scanning calorimetry results. A temperature dependence study of the infrared spectra provides evidence of the occurrence of structural phase transitions related to the dynamics of the alkylammonium ions and hydrogen bonds. The main transition at 374 K corresponds to the conformational order-disorder change in the chain, which probably couples with reorientational motions of the NH3 polar heads. GTG or GTG' defects appear in the high temperature disordered phase.

Sequence analysis of the ITS region and 5.8S rDNA of Porphyra haitanensis

The sequences of the ITS (internal transcribed spacer) and 5.8S rDNA of three cultivated strains of Porphyra haitanensis thalli (NB, PT and ST) were amplified, sequenced and analyzed. In addition, the phylogenic relationships of the sequences identified in this study with those of other Porphyra retrieved from GenBank were evaluated. The results are as follows: the sequences of the ITS and 5.8S rDNA were essentially identical among the three strains. The sequences of ITS l were 331 by to 334 bp, while those of the 5.8S rDNA were 158 by and the sequences of ITS2 ranged from 673 by to 681 bp. The sequences of the ITS had a high level of homology (up to 99.5%) with that of P. haitanensis (DQ662228) retrieved from GenBank, but were only approximately 50% homologous with those of other species of Porphyra. The results obtained when a phylogenetic tree was constructed coincided with the results of the homology analysis. These results suggest that the three cultivated strains of P. haitanensis evolved conservatively and that the ITS showed evolutionary consistency. However, the sequences of the ITS and 5.8S rDNA of different Porphyra species showed great variations. Therefore, the relationship of Porphyra interspecies phyletic evolution could be judged, which provides the proof for Porphyra identification study. However, proper classifications of the subspecies and the populations of Porphyra should be determined through the use of other molecular techniques to determine the genetic variability and rational phylogenetic relationships.

The role of the community service order and the suspended sentence in Ireland: a judicial perspective

Imprisonment is the most severe penalty utilised by the criminal courts in Ireland. In recent decades the prison population has grown significantly despite expressions both official and public to reduce the use of the sanction. Two other sanctions are available to the Irish sentencer which may be used as a direct and comparable sentence in lieu of a term of imprisonment namely, the community service order and the suspended sentence. The community service order remains under-utilised as an alternative to the custodial sentence. The suspended sentence is used quite liberally but its function may be more closely related to the aim of deterrence rather than avoiding the use of the custodial sentence. Thus the aim of decarceration may not be optimal in practice when either sanction is utilised. The decarcerative effect of either sanction is largely dependent upon the specific purpose which judges invest in the sanction. Judges may also be inhibited in the use of either sanction if they lack confidence that the sentence will be appropriately monitored and executed. The purpose of this thesis is to examine the role of the community service order and the suspended sentence in Irish sentencing practice. Although community service and the suspended sentence present primarily as alternatives to the custodial sentence, the manner in which the judges utilise or fail to utilise the sanctions may differ significantly from this primary manifestation. Therefore the study proceeds to examine the judges' cognitions and expectations of both sanctions to explore their underlying purposes and to reveal the manner in which the judges use the sanctions in practice. To access this previously undisclosed information a number of methodologies were deployed. An extensive literature review was conducted to delineate the purpose and functionality of both sanctions. Quantitative data was gathered by way of sampling for the suspended sentence and the part-suspended sentence where deficiencies were apparent to show the actual frequency in use of that sanction. Qualitative methodologies were used by way of focus groups and semi-structured interviews of judges at all jurisdictional levels to elucidate the purposes of both sanctions. These methods allowed a deeper investigation of the factors which may promote or inhibit such usage. The relative under-utilisation of the community service order as an alternative to the custodial sentence may in part be explained by a reluctance by some judges to equate it with a real custodial sentence. For most judges who use the sanction, particularly at summary level, community service serves a decarcerative function. The suspended sentence continues to be used extensively. It operates partly as a decarcerative penalty but the purpose of deterrence may in practice overtake its theoretical purpose namely the avoidance of custody. Despite ongoing criticism of executive agencies such as the Probation Service and the Prosecution in the supervision of such penalties both sanctions continue to be used. Engagement between the Criminal Justice actors may facilitate better outcomes in the use of either sanction. The purposes for which both sanctions are deployed find their meaning essentially in the practices of the judges themselves as opposed to any statutory or theoretical claims upon their use or purpose.

Mathematical modelling of the solidification of liquid tin with electromagnetic stirring

It is well known that during alloy solidification, convection currents close to the so-lidification front have an influence on the structure of dendrites, the local solute concentration, the pattern of solid segregation, and eventually the microstructure of the casting and hence its mechanical properties. Controlled stirring of the melt in continuous casting or in ingot solidification is thought to have a beneficial effect. Free convection currents occur naturally due to temperature differences in the melt and for any given configuration, their strength is a function of the degree of superheat present. A more controlled forced convection current can be induced using electro-magnetic stirring. The authors have applied their Control-Volume based MHD method [1, 2] to the problem of tin solidification in an annular crucible with a water-cooled inner wall and a resistance heated outer one, for both free and forced convection situations and for various degrees of superheat. This problem was studied experimentally by Vives and Perry [3] who obtained temperature measurements, front positions and maps of electro-magnetic body force for a range of superheat values. The results of the mathematical model are compared critically against the experimental ones, in order to validate the model and also to demonstrate the usefulness of the coupled solution technique followed, as a predictive tool and a design aid. Figs 6, refs 19.

Advanced occupant behavioural features of the building-EXODUS evacuation model

The purpose of this paper is to describe and demonstrate some of the advanced behavioral features currently being developed for the building-EXODUS evacuation model. These advanced features involve the ability to specify roles for particular individuals during the evacuation. With these enhancements to the Behavioral Sub model of building-EXODUS, it is possible to include a number of procedural and behavioral aspects previously ignored in evacuation simulations. These include the behavioral aspect of group bonding, the procedural aspects involved with the role of the fire warden and rescue operations undertaken by the fire services. The importance of these enhancements are discussed and demonstrated through three simple simulations.