Some segmental features on the structure of the aortic wall of the dog

Structural features of segmental parts of the aorta of the dog were studied by light microscopy (LM) and scanning electron microscopy (SEM). The variability in the wall architecture composition and vascular thickness of the ascending (T2-3 level), thoracic (T7-8 level) and abdominal (L6-7 infrarenal level) segments of the aorta was analysed. Morphological features such as presence of intimal folds, pattern of the medial myoconnective components with segmental variations in the number of elastic lamellae, whose relative number was higher in the thoracic aorta (ascending and descending parts), compared with the abdominal aorta, and a network of connective (stromal) elements formed by elastic and collagen lamellae and fibres in the adventitia were observed. The results were discussed on a histophysiological basis, because small but significant segmental differences had been characterized in the aortic wall structure of the dog.

Histological study of the dynamics in epidermis regeneration of the carp tail fin (Cyprinus carpio, Linnaeus, 1758)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Anther development, microsporogenesis and microgametogenesis in Heliconia (Heliconiaceae, Zingiberales)

Anther development, micro sporogenesis and microgametogenesis in several species of Heliconia were investigated as part of a complementary embryological study of the Heliconiaceae. All studied Heliconia species present bithecate and tetrasporangiate anthers with fertile pollen grains; only H. rivularis, a natural hybrid, presented sterile pollen grains of variable size and no content. The anther wall has an uniseriate epidermis and endothecium, the latter with helicoidal thickenings, although some cells of the middle layers also showed thickenings; the biseriate tapetum is of amoeboid non-syncytial type, since the tapetum cells did not fuse together forming a true plasmodium. The microsporogenesis is successive leading to isobilateral tetrads. The inaperturate pollen grains had a very reduced exine consisting of a thin, more or less continuous layer with small spines upon; the pollen grain shape is variable among the species, all of them presenting heteropolar pollen, except H. angusta with isopolar ones. Most of these characteristics were shared with other studied Zingiberales, although more studies need to be done. (c) 2006 Elsevier GmbH. All rights reserved.

Flower morpho-anatomy in Epiphyllum phyllanthus (Cactaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Do leaves in Cyperoideae (Cyperaceae) have a multiple epidermis or a hypodermis?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização anatômica e química da folha e do sistema radicular de Hydrocotyle umbellata (Apiaceae)

A família Apiaceae (Umbelliferae), também denominada de pioneira das praias, é capaz de habitar locais de alto teor de salinidade, além de suportar a ação dos ventos e das ondas. O presente trabalho teve como objetivo o estudo da anatomia foliar e radicular e analisar constituintes químicos das folhas e do sistema radicular, caracterizando grupos químicos biologicamente ativos presentes nesses órgãos que permitam aplicações farmacológicas. O material foi coletado na região de Proteção Ambiental Iguape, Cananéia, Peruíbe. As folhas são dorsiventrais, com epiderme unisseriada, bordo regular, parênquima paliçádico com duas a três camadas e parênquima lacunoso com oito e nove camadas de células. É anfiestomática, apresentando grandes câmaras subestomáticas com maior incidência de estômatos na epiderme abaxial. O feixe vascular é colateral apresentando células de esclerênquima em forma de meia lua ao redor do xilema e do floema. O pecíolo apresenta contorno irregular, está envolvido por colênquima em toda sua extensão e apresenta grande quantidade de canais secretores entre os feixes vasculares. O rizoma apresenta contorno irregular com variação de 10 a 15 camadas de células de parênquima constituindo o córtex. O cilindro central é constituído por feixes colaterais delimitados pela endoderme. O periciclo é sinuoso e envolve totalmente os feixes vasculares. Sob a epiderme há uma faixa contínua de colênquima. A medula é constituída de células de parênquima de parede fina. H. umbellata apresentou triterpenos, saponinas, flavonóides, compostos poliacetilênicos e leucoceramidas. Folhas e rizomas apresentaram constituintes químicos semelhantes, com diferenças apenas na intensidade dos picos, o que denota diferença quantitativa entre as substâncias presentes. O rendimento do extrato do rizoma é menor que o rendimento das folhas.

Anatomia e ultra-estrutura do pulvino primário de Pterodon pubescens Benth. (Fabaceae - Faboideae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anatomia foliar de Tillandsia L. (Bromeliaceae) dos Campos Gerais, Paraná, Brasil

Foi estudada a anatomia foliar de Tillandsia crocata (E. Morren) Baker, T. gardneri Lindl., T. geminiflora Brongn., T. linearis Vell., T. lorentziana Griseb., T. mallemontii Glaziou ex Mez, T. recurvata L., T. streptocarpa Baker, T. stricta Soland ex Sims, T. tenuifolia L. T. usneoides L. e Tillandsia sp., dos Campos Gerais, Paraná, Brasil. em vista frontal a epiderme apresenta células com paredes lineares até sinuosas, corpos silicosos e escamas epidérmicas que protegem os estômatos anomocíticos. A epiderme e o primeiro estrato da hipoderme apresentam células lignificadas na maioria das espécies. em secção transversal observa-se estômatos que ocorrem um pouco abaixo do nível das demais células da epiderme; presença de parênquima aqüífero; canais de ar longitudinais e feixes vasculares colaterais circundados por bainha dupla. Essas estruturas anatômicas são xeromórficas e usualmente consideradas como adaptações ao hábito epifítico das Tillandsia atmosféricas. Além disso, elas poderiam também ser usadas com finalidades diagnósticas para as espécies. Forma do limbo da folha em secção transversal, ornamentação da cutícula, estrutura das escamas epidérmicas, espessamento das paredes das células epidérmicas, distribuição dos estômatos, estrutura e distribuição das células do parênquima aqüífero, presença de canais de ar e tamanho de feixes vasculares são caracteres que podem auxiliar na delimitação taxonômica das espécies dentro do gênero.

Anatomia de raízes de Actinocephalus (Koern.) Sano (Eriocaulaceae)

Estudou-se a anatomia de raízes de 27 espécimes de 13 espécies de Actinocephalus (Koern.) Sano que ocorrem nos campos rupestres brasileiros. As raízes de todos os espécimes estudados caracterizam-se por apresentar: epiderme unisseriada, com pêlos radiculares em grupos ou isolados; córtex com células isodiamétricas, com exceção daquelas localizadas mais internamente, que são menores e apresentam paredes espessadas; endoderme unisseriada, com células de paredes pouco ou totalmente espessadas, alongadas no sentido radial; periciclo formado por uma camada de células de paredes finas ou espessadas e cilindro vascular com elementos do metaxilema ocupando a posição central. A presença de córtex constituído por células isodiamétricas, sem aerênquima; epiderme e parênquima cortical com protuberâncias intracelulares associadas com fungos; são características consistentes para o gênero e corroboram a sua recente circunscrição. As raízes apresentam estruturas anatômicas semelhantes àquelas das espécies de Eriocaulaceae que ocorrem em solos secos, apesar de muitos indivíduos ocorrerem em solos úmidos, próximos a riachos.

Some segmental structural features of the aortic wall of domestic chicken (Gallus domesticus)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Yeast flotation viewed as the result of the interplay of supernatant composition and cell-wall hydrophobicity

Flotation is a process of cell separation based on the affinity of cells to air bubbles. In the present work, flotability and hydrophobicity were determined using cells from different yeasts (Hansenulla polymorpha, Saccharomyces cerevisiae, Candida albicans), which were propagated in different media and at different temperatures. Alterations to the supernatant of the cells were also carried out before the flotation assays. The results described here indicate that supernatants of the yeast cells can play a more important role on flotation than cell-wall hydrophobicity. For example, wall-hydrophobicity of strain FLT-01 of S. cerevisiae was high but flotation did not occur when their washed cells were resuspended in water. Additions of neopeptone to cultures of S. cerevisiae and H. polymorpha repressed flotation and increased the volume of foam. An additional task of the present work was to show that the relationship between cell-wall hydrophobicity and flotation performance was dependent on the method used for the measurement of hydrophobicity. Based on the assay procedure, two types of hydrophobicity were distinguished: (a) the apparent hydrophobicity for cells suspended in the medium and expressed by the degree of cell affinity to the organic solvent in the two-phase system supernatant/hexane; (b) the standard hydrophobicity, which was determined for cells suspended in a standard solution (acetate buffer, in the present work) within the acetate buffer/hexane system. Flotation of cells of S. cerevisiae and C albicans were best related to the degree of apparent hydrophobicity (varying with the supernatant composition at the cell/medium interface) rather than to the degree of standard hydrophobicity (varying with the alterations in the wall components, since the liquid phase was constant in the assay). However, depending on the yeast unpredictable results can be obtained. For example, cells of H. polymorpha exhibited good flotation associated to a high degree of standard hydrophobicity while having a lower degree of apparent hydrophobicity. Concerning growth temperature, flotation of cells of C albicans was strongly repressed when the temperature was raised from 30 to 38 degreesC while a similar effect was not observed in cultures of S. cerevisiae and H. polymorpha. It is difficult to understand and predict flotation of yeast cells but simple modifications made to the supernatant of cultures can activate or repress flotation. (C) 2003 Elsevier B.V. B.V. All rights reserved.

A finite element free convection model for the side wall heated cavity

This paper presents a finite element numerical solution of free convection in a cavity with side walls maintained at constant but different temperatures. The predictions from the model and the method of solution were validated by comparison with the 'bench mark' solution and Vahl Davis' results and good agreement was found. The present model was used to obtain additional results over a wide range of Rayleigh number (10(3)-10(6)) and L/H ratios varying from 0.1 to 1.0. The predicted stream function patterns, temperature and velocity profiles as well as the mean Nusselt number were presented and discussed. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

A 2D coordination polymer with brick-wall network topology based on the [Cu(NCS)(2)(pn)] monomer

The new complex [Cu(NCS)(2)(pn)] (1) (pn = 1,3-propanediamine) has been synthesized and characterized by elemental analysis, infrared and electronic spectroscopy. Single crystal X-ray diffraction studies revealed that complex 1 is made up of neutral [Cu(NCS)(2)(pn)] units which are connected by mu-1,3,3-thiocyanato groups to yield a 2D metal-organic framework with a brick-wall network topology. Intermolecular hydrogen bonds of the type NH...SCN and NH...NCS are also responsible for the stabilization of the crystal structure. (c) 2007 Elsevier B.V. All rights reserved.

Effects of Nd : YAG laser irradiation on root canal dentin wall: A scanning electron microscopic study

Objective: the purpose of this study was to evaluate, by scanning electron microscopy (SEM), the effects of Nd:YAG laser irradiation applied perpendicular or parallel to the root canal dentin wall. Methods: Thirty human teeth were divided into two groups: Group A (20 roots), laser application with circular movements, parallel to the dentin root surface; and Group B (10 roots), roots cut longitudinally and laser applied perpendicular to the root surface. Group A was subdivided into A1 (10 roots), laser application with 100 mJ, 15 Hz and 1.5 W; and A2 (10 roots) with 160 mJ, 15 Hz, and 2.4 W. Group B was subdivided into B1 (10 hemisections) and B2 (10 hemi-sections) with parameters similar to A I and A2. Four applications of 7-sec duration were performed, with a total exposure of 28 sec. SEM evaluations were made in the cervical, middle, and apical thirds, with 500X and 2000X magnifications. Morphological changes scores were attributed, and the results were submitted to Kruskal Wallis statistical test (5%). Results: Significant statistical differences were found between groups A and B (p = 0.001). In groups A1 and A2, few areas of dentin melting were observed. In groups B1 and B2, areas of melting dentin covering dentin surface were observed. Conclusions: It was concluded that intracanal laser application with circular movements (parallel to the surface) produces limited morphological changes in root canal dentin wall.