Zoneamento acústico urbano e mapeamento de níveis sonoros na zona central de Rio Claro (SP): diretrizes para o gerenciamento do ruído integrado ao planejamento ambiental urbano

Considering the growing degradation of the urban environmental quality resulting from the progressive sound pollution increase, as well as the consequent harmful effects about the human health, the present study had its central objective the argument and management tools implementation of the urban noise that can be integrated to the environmental planning in the city of Rio Claro (SP). Therefore, normative and bibliographical revisions were developed, that made feasible the directives of control argument and prevention of the urban noise, as well as the technical procedures of sound levels and evaluation’s definition and especially about the criteria applicable for the elaboration of an urban acoustic zoning methodology. Among the main results obtained detach: (1) the applicable legislation to the management of urban noise’s synthesis and argument; (2) the methodology of urban acoustic zoning development and (3) its implementation to determined areas of Rio Claro (SP) with the (4) respective cartography representation; (5) the mapping of sound levels in the central zone of Rio Claro (SP), (6) the obtaining and analysis of noise describers (LAeq, Lmáx, L10, L50, L90, Lmin and TNI) and the subsequent (7) acoustic maps elaboration for the main describers.

Abordagem scrum de gerenciamento ágil para desenvolvimento de novos produtos aplicada a área de ensaios de uma fabricante de aeronaves

There are many approaches and techniques about Administration and Management of Projects in order to provide greater agility, efficiency and transparency during the development process of new products. Simultaneously, a pursuit for a management approach more flexible in its planning and strategic changes during the development campaign, such as, comprehend the project's unpredictability level and deal it by monitoring and estimates tools. These features tend to accentuate itself in manufacturers of complex products, as aircraft and other aerospace technologies. By these conditions thus research aims to describe a case when the Agile Management Processing of Project Development Scrum was used in the Test area of an aircraft manufacturer. Focused on the Scrum implementation over the area, its adaptation, evolution and achievements the research proposes to analyze the improvements, indicate the obstacles and discuss solutions, contributing then to the theoretical basis of the considered theme and futures updates applicable to the area. The research is classified as qualitative; furthermore the information and data analyzed were obtained by interviews with professionals and observations of the processes from the major aircraft manufacturer

A visibilidade do idoso no jornalismo impresso: uma análise das matérias culturais da Folha de São Paulo

The improvements on the quality of life are causing the number of the elderly to grow on a global level, which is causing changes in our society. This new phenomenon demands that some actions are executed in several areas. On the communications field, it is needed to put the older people in the spotlight, so they can know themselves better and be included in the society. The goal of this work is to investigate if there is visibility for the elderly on Folha de São Paulo, using the daily cultural section (Ilustrada) and the weekly papers (the extinct Mais! and Ilustríssima) as a basis for the study. In order to find out the main aspects of the newspaper’s coverage, the Content Analysis is going to be used, a methodology that includes quantitative and qualitative techniques and which intent is to reveal the material’s implicit content. Through it, it will to be possible to understand how the elderly are treated on Folha de São Paulo, and what can be done to better their position in the newspaper

PGCP - Plataforma para Gerenciamento Colaborativo de Projetos

Collaborative Systems are designed to support individuals in order to solve a problem together, or cooperatively (or collaboratively). Such systems have the advantage of not requiring the presence in the same location of the participants. The basis of any Collaborative System is communication, where users interact with each other in order to exchange information. Communication among individuals is accomplished through collaborative tools such as chat, email, document repository, etc.. Using these tools, companies can reduce operational costs, saving on travel and accommodation of its employees to attend meetings. The project members only need a computer with internet access to use collaborative tools. Project management is essential to the quality of the nal product. To perform a proper management, methodologies must be applied using methods, tools and procedures. There are some phases that are considered generic for all software process models, they are: de nition, development, maintenance and activity to support the software process. In this paper is described a platform for project management using the concepts and features of Collaborative Systems. The goal of this platform is to unify various collaborative tools (such as chat and document repository) in a project management system. Using the system, it becomes possible to manage projects, and the ability to maintain an active constant communication between members of each project

Proposta de um procedimento de trabalho para gerenciamento de estoque em uma instituição pública de ensino superior

This paper aims to discuss the system of inventory management in a public university. The present paper shows the definitions, classification of materials and the advantages and disadvantages of storage, besides exposing the public procurement bidding system since the acquisition until receipt of materials to be stored. This paper presents a survey of the items stored in the warehouse and use of control tools such as ABC curve to demand flow prized for verification of critical items and idle items. Displays also a calculation for the minimum value of stock and replacement of an item in inventory and an analysis of the conditions of the warehouse layout. As a result, knowledge is acquired and a revised system of inventory management of the institution was proposed

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Gerenciamento de inventário por meio de ferramentas de controle da produção em empresas de higiene pessoal, perfumaria e cosméticos

This action-research work presents tools which are related to production monitoring: Follow-up of Products Release from Quality Department and Follow-up of Production Volumes. Both tools allows controlling release delays of finished goods based on the quality specifications, and the accurate analysis of production volumes variations compared to pre-established plans. They have direct impact into enterprises inventory levels that are part of Toiletries, Perfumery and Cosmetics market segment. By applying these tools, it´s possible to identify opportunities for process optimization that brings benefits for the final customer. The results seen by the tools application are presented by the analysis of delayed stock for release quantities evolution and testimonies from professionals of Supply Chain

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Plano de gerenciamento sustentável dos resíduos de construção civil. O caso de Rio Claro (SP)

The current problematic of the construction and demolition (C&D) waste faced for the Brazilian cities, is one of the main degradation factors of the environment, over all about the promise of the urban ambient quality. This scenery must mainly to the unsustainable management adopted by the great majority of the Brazilian cities. Therefore, this work aims at to offer subsidies for medium cities, having as study object the city of Rio Claro-SP, (Brazil), in the elaboration of plans and integrated programs of sustainable management of the construction and demolition waste, in accordance with CONAMA Resolution nº 307/2002, that’s set up a sustainable management system of C&D waste. In this direction, the diagnosis of the management was elaborated for the city of Rio Claro, (generation, collects, transport and disposal) and the public administration of the construction and demolition waste, as well as of the study of the related aspects with C&D waste recycling plant. Later, was suggested a plan of improvements for the public manager of C&D waste: areas of temporary disposal to facility the appropriating destination, appropriated areas of final disposal, incentives to the recycling of C&D waste, new legislations, education and orientation programs and adequacy the agents of C&D waste management (generating, transporting, addressee and public manager), directing for an environmental, economic and social sustainability.

Enfermagem e o gerenciamento de custos: revisão sistemática nacional e internacional

Objectives: conduct a systematic review of national and international literature, to classify the types of production, comparing the two literatures and synthesize knowledge in the area. Method: Systematic Review of Literature, in the databases LILACS, CINAHL and MEDLINE for selection of articles in their entirety, the data extracted from the articles selected were: the study of bibliographic information (title, author, journal, place of study and year of publication), and general information (multidisciplinary production or specific area, language, type of study, type of population and contributions of the study). The categories established for classification of publications were: raising the cost of procedures/ interventions, economic evaluation of specific intervention, inclusion of nursing in the economic context, using cost as an important variable in the study. Results: The study included 39 publications, with 31% of national production and the remaining 69%, internationally. Most publications were classified according to category of economic evaluation of specific intervention, followed by the category of raising the cost of procedure / intervention, which fits the majority of national production. Human resources is shaped as an important variable for obtaining cost studies that proposed to make this calculation. Conclusion: The production of literature in nursing cost management is relevant in number of publications within the proposed period and is directed to different areas within this theme. There are significant differences in national and international literature: these last use more accurate methods, have more content theorized, use more the economic evaluation tools and related more costs with a amplified context. The production of such knowledge should continue as far as possible and putting that knowledge relating the current reality, in order to amplify the field of nursing and add value

Considerações sobre o gerenciamento da construção civil em obras residenciais verticais

The civil construction is an industrial sector of great economic importance and that it comes exponentially growing in the country. However, this activity is deficient in its management processes, and in this context that the management of construction as a way of organizing and controlling all the technical and construction of an enterprise. The literature shows that the manager has a key role throughout the process of planning, execution and analysis of the results of the work being of prime importance that all steps have its due attention in order to avoid any technical problems or lack information. The management’s main objective is the transparency of technical and financial information to investors and their assessments of physical and financial performances of the work intervened positively in quality, deadlines and costs. In this sense, this paper aims to present consideration about the proper management of a residential development in vertical construction

Gerenciamento de transação e mecanismo de serialização baseado em Snapshot

Pós-graduação em Ciência da Computação - IBILCE

Estudo sobre o gerenciamento de projeto de desenvolvimento de um veículo Baja para competições

This paper presents a study of practices in project management of a college team that participates in Baja SAE competitions. The use of management techniques can deliver benefits to the project in terms of meeting customer needs, use of time and resources and minimization of risks, for example. Should be sought methods and techniques in agreement with the project context and the team that leads it. This paper analyzes a specific case of baja vehicle project management, obtaining data by means of literature research, archival research and interviews with students on the team (structured and unstructured). The study allowed to relate the practices used by the team and to identify possible areas for improvement, based on the literature on project management. There was thus obtained a set of recommendations for the current team, in future initiatives, and to other teams responsible for carrying out similar projects

Uma Experiência de implantação do método da corrente crítica no gerenciamento de portfólio de projetos de uma empresa tecnológica

TFor companies to remain competitive should seek investment in the project management through new tools. The method Critical Chain has been considered an innovative way to manage projects, to promote change and give great results. However, there are still some questions to be answered and there are few papers reporting on the implementation of CCPM method in real environment of multiple projects. This work analyze the deployment process of Critical Chain at a company in the technology sector, in order to check the risk factors, advantages and difficulties in that process. Showing not only the likely benefits, but also the possible difficulties, mainly cultural and behavioral, inherent in all business transformation processes in order to support the implementation of all theoretical architecture for corporate reality

Sistema de gerenciamento de energia para controle de carga/descarga entre baterias de lítio e ultracapacitores, envolvendo sistema de tração elétrica com frenagem regenerativa

Pós-graduação em Engenharia Elétrica - FEIS