The Garment Industry in Cambodia: Its Role in Poverty Reduction through Export-Oriented Development

Cambodia's export-oriented garment industry has contributed greatly to poverty reduction in the country through employment of the poor. This paper provides a statistical verification of this contribution based on firm-level data from 164 sampled companies collected in 2003. Its main conclusions confirm the substantial impact that employment in the garment industry has had on poverty reduction in Cambodia. Firstly, entry-level workers receive wages far above the poverty line. Secondly, females make up the predominant share of the main category jobs in the industry. Thirdly, barriers to employment and to promotions up to certain job categories are not high in terms of education and experience. Another important finding is that a typical sample firm exhibited high profitability, although there was wide variation in profitability among firms. This average of high profitability could be a good predictor of Cambodia's viability in the intensified competition since the phase out of the Multi-Fiber Arrangement (MFA) at the beginning of 2005. A point of note is that Cambodia's pattern of industrial development led by a labor-intensive industry is similar to that of neighboring countries in East Asia which earlier went through the initial stage of industrial development, except that Cambodia has lacked a strong government industrial promotion policy which characterized the earlier group.

The Flowchart Model of Cluster Policy: The Automobile Industry Cluster in China

This paper proposes a general model of the flowchart approach to industrial cluster policy and applies this model to Guangzhou's automobile industry cluster. The flowchart approach to industrial cluster policy is an action plan for prioritizing policy measures in a time-ordered series. We reached the following two conclusions. First,we clarified the effects of Honda, Nissan, and Toyota on agglomeration in Guangzhou's automobile industry cluster. Second, we established that local governments play a crucial role in successful industrial cluster policy, and that the mayor of the local government should be offered incentives in order to target industrial clustering and implement cluster policy.

Competitiveness of the knitwear industry in Bangladesh : a study of industrial development amid global competition

This paper assesses the technical efficiency and profitability of the knitwear industry in Bangladesh taking into account the sector’s role in poverty reduction. While stochastic frontier analysis was invoked to assess technical efficiency, three alternative measures, namely the rate of return, total factor productivity and the Solow residual, were used to gauge the extent and determinants of the profitability of the industry based on firm-level data collected in 2001. The estimation results indicate the high profitability of the knitwear firms. In Bangladesh, the dynamic development of the industry has entailed great diversity in efficiency in comparison with the garment industries of other developing countries. While there is a significant scale effect in profitability and productivity, no supporting evidence was found for the positive impact on competitiveness of industrial upgrading in terms of usage of expensive machinery and vertical integration and industrial agglomeration.

Asian Industrial Development from the Perspective of the Motorcycle Industry

This paper discusses the diversity of industrial development among Asian countries that emerges through an investigation of the motorcycle industry despite its uniform industrial attributes. The paper then explores factors that generate diversity, focusing attention on the differences in knowledge-based assets accumulated in each country. It finds that diversity is brought about through the differences in domestic industrial resources and the capabilities of local firms. The analysis underscores each country’s intrinsic logic in industrial development, contrary to the current trend of stressing assimilation through the global production networks of multinational corporations.

What motivates female operators to enter the garment industry in Pakistan in the post-MFA period?

Pakistan's knitwear exports had been struggling since the quota phase-out until 2009. A particular feature of Pakistan's garment industry is that hiring more male sewing operators at piece rates. Recently, a few surviving knitwear factories have adopted a strategy of shifting from male piece-rate operators to salaried female operators. In Pakistan, female participation in general workforce is very limited and hiring salaried female operators requires management effort and expertise. However, even in the factories with such management skills, household factors prevent females from working outside because Pakistani culture disrespects women working in factories. Our survey reveals that financial motives compel female household members to work outside their homes and that female operators contribute substantially to their households' finances.

Black economic empowerment in the South African agricultural sector : a case study of the wine industry

This paper explores the extent and forms of black economic empowerment (BEE) in the South African agricultural sector through a case study of the wine industry in the Western Cape. Compared to the mining and fisheries sectors, the progress of BEE in the agricultural sector is still in the early stage. However, various forms of black entry into the wine industry, not limited to BEE deals by large corporations, began to emerge, especially since the enactment of the Broad-based Black Economic Empowerment Act (BBBEE Act), Act 53 of 2003. This paper identifies two types of BEE wineries as unique forms of black entry into the wine industry and investigates in detail their features, backgrounds and challenges by referring to several prominent examples of each type of BEE winery.

Exploring the sources of China's challenge to Japan : models of industrial organisation in the motorcycle industry

In view of the recent rise of China, this paper looks into one of the most important yet relatively overlooked ingredients of the Chinese success: industrial organisation. It will examine the case of the motorcycle industry, in which the rise of Chinese manufacturers even disrupted the established dominance of Japanese industry leaders. Adopting the modified version of the global value chain governance framework, this paper shows that the rise of China has been driven by a distinctive arm’s-length model of industrial organisation, which is in sharp contrast to the conventional captive model that has sustained the Japanese leadership.

Slow and steady wins the race : how the garment industry leads industrialization in low-income countries

This paper investigates how the garment industry escapes this vicious cycle and argues for the validity of labor-intensive industry as a starting point for full-fledged industrialization, even though it might at first seem to be a digression from the path to an innovation-led economy. By examining original firm-level data on garment-producing firms collected in 2002 and 2008 in Bangladesh, Cambodia, Kenya and Madagascar, the following conclusions are drawn: (1) low wages, though still sufficient for poverty reduction, are the main source of competitiveness in low-income countries; (2) after the successful initiation of industrialization causes wages to begin to rise, there is still a possibility for productivity enhancement; and (3) skill bias in technological progress is not yet a major factor, implying that the garment industry is still a labor-intensive industry. In sum, labor-intensive industry should not be discounted as a part of the development strategy of low-income countries.

Service needs forecasting: an approach for the automotive industry using analogies with medical ER management models.

During the past years, the industry has shifted position and moved towards “the luxury universe” whose customers are demanding, treating individuals as unique and valued customer for the business, offering vehicles produced with the state of the art technologies and implementing the highest finishing standards. Due to the competitive level in the market, car makers enable processes which equalizes customer services to E.R. management, being dealt with the maximum urgency that allows the comparison between both, car workshops and emergency rooms, where workshop bays or ramps will be equal to emergency boxes and skilled technicians are equivalent to the health care specialist, who will carry out tests and checks prior to afford any final operation, keeping the “patient” under control before it is back to normal utilization. This paper establishes a valid model for the automotive industry to estimate customer service demand forecasting under variable demand conditions using analogies with patient demand models used for the medical ER.

SERVICE NEEDS FORECASTING: An Approach for the Motor Industry Using Analogies with Medical ER Management Models.

During the past years, the industry has shifted position and moved towards “the luxury universe” whose customers are demanding, treating individuals as unique and valued customer for the business, offering vehicles produced with the state of the art technologies and implementing the highest finishing standards. Due to the competitive level in the market, motor makers enable processes which equalizes customer services to E.R. management, being dealt with the maximum urgency that allows the comparison between both, car workshops and emergency rooms, where workshop bays or ramps will be equal to emergency boxes and skilled technicians are equivalent to the health care specialist, who will carry out tests and checks prior to afford any final operation, keeping the “patient” under control before it is back to normal utilization. This paper ratify a valid model for the automotive industry to estimate customer service demand forecasting under variable demand conditions using analogies with patient demand models used for the medical ER

Traditional education vs modern education. What is the impact of teaching techniques' evolution on students learning process?

The main objective of this article is to focus on the analysis of teaching techniques, ranging from the use of the blackboard and chalk in old traditional classes, using slides and overhead projectors in the eighties and use of presentation software in the nineties, to the video, electronic board and network resources nowadays. Furthermore, all the aforementioned, is viewed under the different mentalities in which the teacher conditions the student using the new teaching technique, improving soft skills but maybe leading either to encouragement or disinterest, and including the lack of educational knowledge consolidation at scientific, technology and specific levels. In the same way, we study the process of adaptation required for teachers, the differences in the processes of information transfer and education towards the student, and even the existence of teachers who are not any longer appealed by their work due which has become much simpler due to new technologies and the greater ease in the development of classes due to the criteria described on the new Grade Programs adopted by the European Higher Education Area. Moreover, it is also intended to understand the evolution of students’ profiles, from the eighties to present time, in order to understand certain attitudes, behaviours, accomplishments and acknowledgements acquired over the semesters within the degree Programs. As an Educational Innovation Group, another key question also arises. What will be the learning techniques in the future?. How these evolving matters will affect both positively and negatively on the mentality, attitude, behaviour, learning, achievement of goals and satisfaction levels of all elements involved in universities’ education? Clearly, this evolution from chalk to the electronic board, the three-dimensional view of our works and their sequence, greatly facilitates the understanding and adaptation later on to the business world, but does not answer to the unknowns regarding the knowledge and the full development of achievement’s indicators in basic skills of a degree. This is the underlying question which steers the roots of the presented research.

Collaborative Engineering Paradigm Applied to the Aerospace Industry

Airbus designs and industrializes aircrafts using Concurrent Engineering techniques since decades. The introduction of new PLM methods, procedures and tools, and the need to reduce time-to-market, led Airbus Military to pursue new working methods. Traditional Engineering works sequentially. Concurrent Engineering basically overlaps tasks between teams. Collaborative Engineering promotes teamwork to develop product, processes and resources from the conceptual phase to the start of the serial production. The CALIPSO-neo pilot project was launched to support the industrialization process of a medium size aerostructure. The aim is to implement the industrial Digital Mock-Up (iDMU) concept and its exploitation to create shop floor documentation. In a framework of a collaborative engineering strategy, the project is part of the efforts to deploy Digital Manufacturing as a key technology for the industrialization of aircraft assembly lines. This paper presents the context, the conceptual approach and the methodology adopted.

System theory based hazard analysis applied to the process industry

Chemical process accidents still occur and cost billions of dollars and, what is worse, many human lives. That means that traditional hazard analysis techniques are not enough mainly owing to the increase of complexity and size of chemical plants. In the last years, a new hazard analysis technique has been developed, changing the focus from reliability to system theory and showing promising results in other industries such as aeronautical and nuclear. In this paper, we present an approach for the application of STAMP and STPA analysis developed by Leveson in 2011 to the process industry.

The past and the future fate of the universe and the formation of structure in it

The history and the ultimate future fate of the universe as a whole depend on how much the expansion of the universe is decelerated by its own mass. In particular, whether the expansion of the universe will ever come to a halt can be determined from the past expansion. However, the mass density in the universe does not only govern the expansion history and the curvature of space, but in parallel also regulates the growth of hierarchical structure, including the collapse of material into the dense, virialized regions that we identify with galaxies. Hence, the formation of galaxies and their clustered distribution in space depend not only on the detailed physics of how stars are formed but also on the overall structure of the universe. Recent observational efforts, fueled by new large, ground-based telescopes and the Hubble Space Telescope, combined with theoretical progress, have brought us to the verge of determining the expansion history of the universe and space curvature from direct observation and to linking this to the formation history of galaxies.

Star scientists and institutional transformation: Patterns of invention and innovation in the formation of the biotechnology industry

The most productive (“star”) bioscientists had intellectual human capital of extraordinary scientific and pecuniary value for some 10–15 years after Cohen and Boyer’s 1973 founding discovery for biotechnology [Cohen, S., Chang, A., Boyer, H. & Helling, R. (1973) Proc. Natl. Acad. Sci. USA 70, 3240–3244]. This extraordinary value was due to the union of still scarce knowledge of the new research techniques and genius and vision to apply them in novel, valuable ways. As in other sciences, star bioscientists were very protective of their techniques, ideas, and discoveries in the early years of the revolution, tending to collaborate more within their own institution, which slowed diffusion to other scientists. Close, bench-level working ties between stars and firm scientists were needed to accomplish commercialization of the breakthroughs. Where and when star scientists were actively producing publications is a key predictor of where and when commercial firms began to use biotechnology. The extent of collaboration by a firm’s scientists with stars is a powerful predictor of its success: for an average firm, 5 articles coauthored by an academic star and the firm’s scientists result in about 5 more products in development, 3.5 more products on the market, and 860 more employees. Articles by stars collaborating with or employed by firms have significantly higher rates of citation than other articles by the same or other stars. The U.S. scientific and economic infrastructure has been particularly effective in fostering and commercializing the bioscientific revolution. These results let us see the process by which scientific breakthroughs become economic growth and consider implications for policy.