984 resultados para Feeder Calves
Resumo:
Summary: Effect of restricted feeding on the live weight of suckler cows and their calves, quality of colostrum and calf serum IgG concentration
Resumo:
This work compared the behaviour of pre-parturient sows housed in intensive confined and outdoor systems, during the morning and afternoon prior to delivery. Eight sows were kept individually in farrowing crates or in paddocks with access to fresh pasture from 8 to 10 days before expected parturition. All outdoor sows built a nest within 24 hours before farrowing. On the morning and afternoon before farrowing they spent 6.5% of the time collecting grass and 7.5% of the time organizing the nest. Outdoor sows were observed more often than confined sows rooting (4.60% vs. 0.25%), feeding (10.2% vs. 3.0%), standing (51% vs. 13%) and walking (8% vs. 0%). Indoor sows redirected the nesting behaviour to other behaviours like attempts to dig the ground, nosing, biting and rooting parts of the crate, feeder or drinker, during 4.7% of the time. They also spent more time than outdoor sows inactive (85% vs. 60%), lying (72% vs. 41%), drinking (2.1% vs. 0.5%) and vacuum chewing (3.7% vs. 0.1%). The pre-parturient behaviour of sows was considerably affected by the husbandry system. The outdoor system appears to be more appropriate for the sows' welfare than the conventional confinement.
Resumo:
The molecular and isotopic chemistry of organic residues from archaeological potsherds was used to obtain further insight into the dietary trends and economies at the Constance lake-shore Neolithic settlements. The archaeological organic residues from the Early Late Neolithic (3922-3902 BC) site Hornstaad-Hornle IA/Germany are, at present, the oldest archaeological samples analysed at the Institute of Mineralogy and Geochemistry of the University of Lausanne. The approach includes 13C/12C and 15N/14N ratios of the bulk organic residues, fatty acids distribution and 13C/12C ratios of individual fatty acids. The results are compared with those obtained from the over 500 years younger Neolithic (3384-3370 BC) settlement of Arbon Bleiche 3/Switzerland and with samples of modern vegetable oils and fat of animals that have been fed exclusively on C3 forage grasses. The overall fatty acid composition (C9 to C24 range, maximizing at C14 and C16), the bulk 13C/12C and 15N/14N ratios (delta13C, delta15N) and the 13C/12C ratios of palmitic (C16:0), stearic (C18:0) and oleic acids (C18:1) of the organic residues indicate that most of the studied samples (25 from 47 samples and 5 from 41 in the delta13C18:0 vs. delta13C16:0 and delta13C18:0 vs. delta13C18:1 diagrams, respectively) from Hornstaad-Hornle IA and Arbon Bleiche 3 sherds contain fat residues of pre-industrial ruminant milk, and young suckling calf/lamb adipose. These data provide direct proof of milk and meat (mainly from young suckling calves) consumption and farming practices for a sustainable dairying in Neolithic villages in central Europe around 4000 BC.dagger
Resumo:
The relationship between changes in body condition score (BCS) during the postpartum and fertility in beef cows suckling calves under extensive conditions were investigated. Cows were subjected to four BCS evaluations over the postpartum period, starting around one month after calving. In the second evaluation cows were treated with medroxy-progesterone acetate impregnated pessaries and received an injection of estradiol benzoate. At the third evaluation, pessaries were removed and calves were separated from the cows for 96 hours, during which time estrous was observed twice a day, and animals artificially inseminated 12 hours after detection. When calves returned to their dams, bulls were introduced until a 60-day mating period was reached. The distribution of BCS differed among calving groups and evaluations. Results indicated that only cows comprising a BCS 3 (1 to 5 scale) around the first month postpartum can be used in an artificial insemination program with possibilities of becoming pregnant. There was no statistical difference between the calving groups in pregnancy rate. The evolution of the BCS of the cows during postpartum can be used to adjust the start of the breeding season to coincide with the time of the year where herd pregnancy rates will be highest.
Resumo:
Sand Creek is the most significant recreational fishery in Delaware County because of its location to Manchester and Lake Delhi. It is a feeder stream for game fish to the main stem of the Maquoketa River which is limited by the dams at Manchester and Lake Delhi. Sand Creek encompasses 16,045 acres and is dominated by row crop agriculture. It is being impacted by sediment, nutrients and E coli bacteria. Sand Creek will be a good example for habitat impaired watershed. The purpose of this project is to decrease the amount of sediment and nutrients reaching Sand Creek and to increase the habitat in Sand Creek to make it a better spawning and growing area for the fish and the food chain for the fish. The objectives of this project are to reduce sediment delivery by 40%, to improve in-stream habitat on 40% of identified critical areas and implement an information/education program. The project will install 3,800 acres of new no-till planting, 6 water and sediment control basins, 4,000 feet of terraces, 20,000 feet of improved or new waterways, 3,200 feet of streambank/ habitat enhancement, 4,500 feet of livestock exclusion fencing and 6 acres of wetlands.
Resumo:
Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.
Resumo:
Prosessiteollisuuden aloilla, kuten lasin raaka-ainelaitoksissa ja laasti- ja tasoitetehtaissa, prosessin onnistumisen kannalta jauhemaisten raaka-aineiden tarkka annostelu on avainasemassa. Diplomityön tarkoituksena oli kehittää olemassa olevan idean pohjalta uusi materiaalin annostelulaite jauhemaisille ja fluidisoituville aineille. Tavoitteena oli suunnitella annostelulaite toimivalle prototyyppiasteelle ja saamaan siitä informaatiota materiaalilaboratoriossa tehtävien annostuskokeiden avulla. Työssä tarkasteltiin aluksi yleisesti jauhemaisen aineen ominaisuuksia ja ongelmia, tyypillisiä annostelulaitteita ja annostustarkkuuteen ja punnitustarkkuuteen vaikuttavia tekijöitä. Varsinainen laitekehitys eteni tyypillisen tuotekehitystyön mukaisesti. Annostuslaite kattaa laaj an dynaamisen toiminta-alueen eli massavirran säätömandollisuus on samalla toimilaitteella aikaisempia annostelulaitteita laajempi. Laite soveltuu erittäin tarkkaan annostukseen hyvin lyhyellä annostusajalla. Hyvät ja luotettavat annostusjärjestelmät myötävaikuttavat merkittävästi koko tehdaskaupan saamiseen, koska asiakas säästää työvoimakustannuksissa ja laatukustannuksissa. Kehittämällä jauhemaisten aineiden annostusta saadaan tekninen etumatka kilpailijoihin nähden.
Resumo:
Abstract:The objective of this work was to define the traits that should be included as breeding objectives for Nellore cattle, according to simulations with a bio-economic model for rearing systems. The economic values (EVs) of the traits were calculated as the differences between the profits due to an increased performance of 1% in each trait, with the others traits remaining constant. To determine the impact of each selection on the revenue system, two scenarios were simulated based on the traits being selected. In the first scenario, the adopted selection criteria were: weaning weight (WW), weaning rate (WR), yearling weight (YW), and mature cow weight (MCW). In the second scenario, the cumulative productivity (CP) of dams was used as an indirect evaluation of the performance of calves, with all the other traits included, except WW. In the first scenario, an EV of R$ 1.44 kg-1 was obtained for WW. In the second scenario, an EV of R$ 2.91 kg-1 was obtained for CP. The trait with the highest EV in both scenarios was WR, which enhanced the profits by R$ 3.21 for each 1% increased performance. The meat price paid to the producer is the factor with the greatest impact on the EVs of all examined traits.
Resumo:
AIM: To report a case series of five patients diagnosed with choroidal schwannoma at the Liverpool Ocular Oncology Centre. METHODS: Patients with choroidal schwannoma were identified by searching the computerised database of the Liverpool Ocular Oncology Centre. RESULTS: The patients (3 males, 2 females) ranged in age from 15 years to 45 years. Three tumours were treated by enucleation, trans-scleral local resection, and combined bevacizumab and photodynamic therapy, respectively. Two were observed after confirmation of the diagnosis by biopsy. CONCLUSIONS: Choroidal schwannoma has a variety of clinical manifestations. Associated features include hard exudates, retinal feeder vessels and serous retinal detachment. Biopsy with immunohistochemistry is required for diagnosis. Tumours not amenable to resection may respond to photodynamic therapy.
Resumo:
Nowadays typical motor junction boxes do not incorporate cable glands, which would provide good electrical performance interms of electromagnetic compatibility. In this paper, a manufacturability and assembly analysis for the new construction of a rigid body feeder cable junction of an electric motor is presented especially for converter drives (practical tests were carried out at LUT during 2007). Although the cable junction should also clamp the cable to provide enough tensile strength, the phase conductors should not get squashed by the groundingconnection. In order to ensure good performance in an electrical mean especially in converter drives, the grounding of the cable should be connected 360 degrees around the cable. In this paper, following manufacturing technologies are discussed: traditional turning, precision and centrifugal casting, and rotation moulding. DFM(A)-aspects are presented in detail.
Resumo:
Twelve variables were identified to define morphology in 109 calves sired by eight Pirenaica bulls widely used in artificial insemination. The effect of selection for weight at 210 days of age (W210) was detected from the regression coefficient between the 12 variables and the selection index for W210 used in the breeding plan. Unbiased estimates of the genetic correlated responses on the morphology were obtained without previously estimating the genetic correlation among traits. In Pirenaica cattle, selection for W210 increased slaughter live weight, chest depth and corporal length. The expected changes on height (withers, back and rump), rump width and thoracic perimeter were lower but positive and statistically significant.
Resumo:
Pseudaletia ( Mythimna) unipuncta (Haworth) es una plaga defoliadora del maíz presente año tras año en la Cuenca del Ebro, que realiza en el maíz daños esporádicos pero a veces devastadores. La implantación creciente de maíz resistente a taladros ha producido, en la zona del presente estudio, la disminución casi total de los daños debidos a los taladros Sesamia nonagrioides (Lefebvre) y Ostrinia nubilalis (Hübner). Sin embargo, no se sabe aún cómo el incremento de maíz transgénico puede afectar a las poblaciones de P. unipuncta. Actualmente no hay datos sobre biología o parámetros del desarrollo de la especie en la Península Ibérica necesarios para evaluar los posibles efectos de las nuevas variedades utilizadas. Para ello es necesario primero establecer un método de cría adecuado y posteriormente iniciar los estudios sobre la biología de la misma. En el presente trabajo se planteó conocer diferentes parámetros del desarrollo larvario de poblaciones locales de P. unipuncta alimentada sobre hoja de maíz (variedades Tietar y PR33P66) y sobre dos dietas semisintéticas, una a base de alubias. Phaseolus vulgaris, y otra a base de maíz, Zea maya. Los resultados mostraron que las larvas desarrolladas en dieta a base de alubias sufrieron menor mortalidad, que las desarrolladas con planta o sobre la otra dieta, además el peso de las pupas resultantes fue mayor y presentaron menos malformaciones. En cuanto al numero de estadios larvarios, la mayoría pupó tras seis mudas larvarias, necesitando, las de dieta de maíz, estadios larvarios adicionales. Estos resultados indican que la dieta a base de alubias es la más adecuada para posteriores trabajos con esta especie.
Resumo:
Se analizaron las variaciones de peso durante la estación de pastoreo de vacas multíparas de raza Parda Alpina con partos en otoño (n = 152) o primavera (n = 123) durante el período 1989-1996. Los animales pasta- ron en áreas boscosas (900-1.500 m, 0,2 vacas/ha) y en pastos supraforestales (1.500-2.200 m, 1,2 vacas/ha). Las vacas con parto en otoño presentaron mayores recuperaciones de peso en pastoreo que las de primavera (0,661 vs 0,071 kg/día, P < 0,001), diferencia observada tanto en los pastos forestales como en los supraforestales. Las variaciones de peso en pastoreo se relacionaron negativamente con las observadas en estabulación (r = –0,20, P < 0,05) y también con el peso a la salida al pasto (r = –0,32, P < 0,05). La contribución energética del pasto a los aportes recibidos anualmente de la dieta fue similar en ambas parideras (43,6 p. 100 y 42,2 p. 100 en otoño y primavera, respectivamente, NS), aunque la pauta de reparto de la energía hacia las funciones fisiológicas en los distintos períodos de manejo fue diferente.
Resumo:
The aim of this study was to evaluate the pathogenicity of Parachlamydia (P.) acanthamoebae as a potential agent of lower respiratory tract disease in a bovine model of induced lung infection. Intrabronchial inoculation with P. acanthamoebae was performed in healthy calves aged 2-3 months using two challenge doses: 10(8) and 10(10) bacteria per animal. Controls received 10(8) heat-inactivated bacteria. Challenge with 10(8) viable Parachlamydia resulted in a mild degree of general indisposition, whereas 10(10) bacteria induced a more severe respiratory illness becoming apparent 1-2 days post inoculation (dpi), affecting 9/9 (100%) animals and lasting for 6 days. The extent of macroscopic pulmonary lesions was as high as 6.6 (6.0)% [median (range)] of lung tissue at 2-4 dpi and correlated with parachlamydial genomic copy numbers detected by PCR, and with bacterial load estimated by immunohistochemistry in lung tissue. Clinical outcome, acute phase reactants, pathological findings and bacterial load exhibited an initial dose-dependent effect on severity. Animals fully recovered from clinical signs of respiratory disease within 5 days. The bovine lung was shown to be moderately susceptible to P. acanthamoebae, exhibiting a transient pneumonic inflammation after intrabronchial challenge. Further studies are warranted to determine the precise pathophysiologic pathways of host-pathogen interaction.
Resumo:
Summary: Production environment, morbidity and mortality of calves in Finnish insulated free stalls