Evolution of and preconditions for generation of corrugations on a plane surface in rolling contact

A hard roller under normal load is driven by the flat surface of a soft disc. Corrugations are generated on the disc when certain surface morphological, load, speed and mechanical property-oriented conditions are met. The evolutionary process of corrugation generation and the preconditions necessary for it are investigated morphologically and mechanically for four disc materials: mild steel, brass, PTFE and PMMA.

Electrical Contact Resistance in Thin (<= 0.5 mu m) Gold Plated Contacts: Effect of Gold Plating Thickness

This paper describes the electrical contact resistance (ECR) measurements made on thin gold plated (gold plating of <= 0.5 mu m with a Ni underlayer of similar to 2 mu m) oxygen free high conductivity (OFHC) Cu contacts in vacuum environment. ECR in gold plated OFHC Cu contacts is found to be slightly higher than that in bare OFHC Cu contacts. Even though gold is a softer material than copper, the relatively high ECR values observed in gold plated contacts are mainly due to the higher hardness and electrical resistivity of the underlying Ni layer. It is well known that ECR is directly related to plating factor, which increases with increasing coating thickness when the electrical resistivity of coating material is more than that of substrate. Surprisingly, in the present case it is found that the ECR decreases with increasing gold layer thickness on OFHC Cu substrate (gold has higher electrical resistivity than OFHC Cu). It is analytically demonstrated from the topography and microhardness measurements results that this peculiar behavior is associated with thin gold platings, where the changes in surface roughness and microhardness with increasing layer thickness overshadow the effect of plating factor on ECR.

Two forms of PF1 INOVIRUS: X-ray diffraction studies on a structural phase transition and a calculated libration normal mode of the assymetric unit

Inovirus is a helical array of agr-helical protein asymmetric units surrounding a DNA core. X-ray fibre diffraction studies show that the Pf1 species of Inovirus can undergo a reversible temperature-induced transition between two similar structural forms having slightly different virion helix parameters. Molecular models of the two forms show no evidence for altered interactions between the protein and either the solvent or the viral DNA; but there are significant differences in the shape and orientation of the protein asymmetric unit, related to the changes in the virion parameters. Normal modes involving libration of whole asymmetric units are in a frequency range with appreciable entropy of libration, and the structural transition may be related to changes in libration.

Structure and conformation of the calcium complex of cyclo(Ala-Leu-Pro-Gly)2 in two crystal forms

Crystal structures of two different forms of the calcium perchlorate complex of cyclo(Ala-Leu-Pro-Gly)2 have been determined and refined using X-ray crystallographic techniques. Orthorhombic form: C32H52N8O8.Ca(ClO4)2.7H2O.2CH3OH, space group C222(1), a = 14.366, b = 18.653, c = 19.824 A, Z = 4, R = 0.068 for 2208 observed reflections. Monoclinic form: C32H52N8O8.Ca(ClO4)2.4H2O, space group C2, a = 21.096, b = 10.182, c = 11.256 A, beta = 103.33 degrees, Z = 2, R = 0.075 for 2165 observed reflections. The cyclic peptide molecule in both the structures has the form of a twofold symmetric, slightly elongated bowl. Type II' beta-turns, involving Gly and Ala at the corners, exist at the two ends of the molecule. The interior of the molecule is substantially hydrophilic, and the external surface of the bowl is largely hydrophobic. The calcium ion is located at the centre of the mouth of the bowl-like molecule. In both crystal forms, four peptide carbonyl oxygens from the cyclic peptide and two solvent oxygens coordinate to the metal ion. The mode of complexation may be described as incomplete encapsulation as, for example, in the case of metal complexes of antamanide. In the crystal structures the complex ions are held together by hydrogen bonds involving perchlorate ions and water molecules. The molecular structure observed in the crystals is entirely consistent with the results of solution studies, which also indicate the conformation of the cyclic peptide in the complex to be similar to that of the uncomplexed molecule.

Pilottitutkimus apteekkien yksilöllisestä tupakoinninvieroituspalvelusta

Apteekkien yksilöllinen tupakoinninvieroituspalvelu on tupakoinnin lopettamiseen motivoituneille asiakkaille tarkoitettu maksullinen erikoispalvelu, joka sisältää 4–6 tapaamista vieroitusohjaajana toimivan farmaseutin tai proviisorin kanssa. Palvelu sisältää asiakkaalle räätälöityä neuvontaa, henkilökohtaisen vieroitussuunnitelman sekä seurantajakson. Apteekkien yksilöllinen tupakoinninvieroituspalvelu perustuu Isossa-Britanniassa kehitettyyn palvelumalliin, ja sitä on tarjottu suomalaisissa apteekeissa vuodesta 2006. Tämä pro gradu -tutkielma käsittelee apteekkien yksilöllisen tupakoinninvieroituspalvelun pilottitutkimusta, joka toteutettiin Suomen Apteekkariliiton ja Helsingin yliopiston farmasian tiedekunnan sosiaalifarmasian osaston yhteistyönä ja se kuului osana Hengitysliitto Heli ry:n koordinoimaa tupakasta vieroituksen hankekokonaisuutta. Tässä pro gradu -tutkielmassa tarkastellaan pilottitutkimuksessa saadun asiakasaineiston avulla apteekkien yksilöllisen tupakoinninvieroituspalvelumallin toimivuutta, asiakkaiden kokemuksia palvelusta, asiakkaiden onnistumista tupaakoinnin lopettamisessa sekä asiakkaiden kyvykkyyden tunteen kehittymistä palvelun aikana. Tässä interventiotutkimuksessa oli mukana 14 apteekkia, jotka rekrytoivat yhteensä 36 palveluasiakasta. Ennen asiakkaiden rekrytointia apteekit perehdytettiin palvelun tarjoamiseen. Apteekit tiedottivat pilottitutkimuksesta paikallisen terveydenhuollon lääkäreitä ja muita terveydenhuollon ammattilaisia, jotka voivat ohjata asiakkaita palveluun. Sosiaali- ja terveysministeriön pilottitutkimukselle myöntämä rahoitus mahdollisti asiantuntijapalkkion maksamisen apteekeille ja palvelun tarjoamisen asiakkaille ilmaiseksi tai pientä omakustannusosuutta vastaan. Asiakkaiden tupakoimattomana pysymistä sekä kokemuksia tupakoinninvieroituspalvelusta kartoitettiin kyselylomakkeilla, jotka asiakkaat saivat täytettäväkseen palvelun alussa sekä noin 3 kuukauden kohdalla palvelun alkamisesta. Asiakkaiden taustatiedot kerättiin ensimmäisen tapaamisen yhteydessä erillisille taustatietolomakkeille ja palvelun aikana tehtyjä huomioita niille tarkoitetuille kaavakkeille. Ensimmäisen kyselylomakkeen palauttaneista 28 henkilöstä 20 ja toisen kyselylomakkeen palauttaneista 17 henkilöstä 13 oli pysynyt tupakoimattomana (55,6 % ja 36,1 % kaikista asiakkaista). Kaikki tupakoinnin lopettaneet käyttivät jotakin tupakasta vieroituslääkettä. Tupakoinnin lopettaneilla asiakkailla kyvykkyyden tunne oli keskimääräistä parempi sekä palvelun alussa että koko palvelun ajan. Asiakkaat pitivät palvelua tarpeellisena ja apteekin vieroitusohjaajalta saatua tukea tärkeänä. Asiakkaat kokivat myös palvelun saamisen apteekista tärkeäksi. Noin 32 % ensimmäiseen kyselyyn vastanneista ja 41 % toiseen kyselyyn vastanneista oli valmis maksamaan palvelusta. Heidän ilmoittamansa maksuvalmius oli keskimäärin noin 45 euroa (10–100 euroa). Muusta terveydenhuollosta lähetettiin palveluun vain vähän tai ei lainkaan asiakkaita. Tästä syystä apteekit rekrytoivat asiakkaita myös ilman kontaktia muuhun terveydenhuoltoon. Palvelun 36 asiakkaasta noin 36 % oli pysynyt tupakoimattomana 3 kuukauden kohdalla. Verrokkiryhmä jouduttiin jättämään tutkimuksesta pois verrokkihenkilöiden rekrytoinnin epäonnistuttua. Tulos on kuitenkin vertailukelpoinen kansainvälisiin tutkimuksiin, joissa on saatu vastaavanlaisia tuloksia. Apteekkien yksilöllisestä tupakoinninvieroituspalvelusta saattaa olla hyötyä tupakoinnin lopettamisessa siihen motivoituneille henkilöille ja erityisesti henkilöille, jotka käyttävät lisäksi tupakasta vieroituslääkettä. Asiakkaat kokivat palvelun tärkeäksi ja tarpeelliseksi, mutta heikko maksuvalmius asettaa haasteita palvelun tarjoamiselle apteekeissa. Yhteistyömallia muun terveydenhuollon kanssa tulisi kehittää.

Transformation formula for exponential sums involving fourier coefficients of modular forms

In 1984 Jutila [5] obtained a transformation formula for certain exponential sums involving the Fourier coefficients of a holomorphic cusp form for the full modular group SL(2, Z). With the help of the transformation formula he obtained good estimates for the distance between consecutive zeros on the critical line of the Dirichlet series associated with the cusp form and for the order of the Dirichlet series on the critical line, [7]. In this paper we follow Jutila to obtain a transformation formula for exponential sums involving the Fourier coefficients of either holomorphic cusp forms or certain Maass forms for congruence subgroups of SL(2, Z) and prove similar estimates for the corresponding Dirichlet series.

A Non-contact measurement technique to measure micro surface stress and obtain deformation profiles of the order of 1nm in Micro-cantilever based structures by single image Optical Diffraction method

A new method based on analysis of a single diffraction pattern is proposed to measure deflections in micro-cantilever (MC) based sensor probes, achieving typical deflection resolutions of 1nm and surface stress changes of 50 mu N/m. The proposed method employs a double MC structure where the deflection of one of the micro-cantilevers relative to the other due to surface stress changes results in a linear shift of intensity maxima of the Fraunhofer diffraction pattern of the transilluminated MC. Measurement of such shifts in the intensity maxima of a particular order along the length of the structure can be done to an accuracy of 0.01mm leading to the proposed sensitivity of deflection measurement in a typical microcantilever. This method can overcome the fundamental measurement sensitivity limit set by diffraction and pointing stability of laser beam in the widely used Optical Beam Deflection method (OBDM).

Elasto-plastic contact stress analysis of joints subjected to cyclic loading

Rigorous elastic-plastic finite element analysis of joints subjected to cyclic loading is carried out. An incremental-iterative algorithm is developed in a modular form combining elasto-plastic material behaviour and contact stress analysis. For the case of the interference fit, the analysis sequentially carries out insertion of the pin and application of the load on the joint, covering possible initiation of separation (and/or yielding) and progressively the receding/advancing contact at the pin-plate interface. Deformations of both the plate and the pin are considered in the analysis. Numerical examples are presented for the case of an interference fit pin in a large plate under remote cyclic tension, and for an interference fit pin lug joint subjected to cyclic loading. A detailed study is carried out for the latter problem considering the effect of change in contact/separation at the pin-plate interface on local stresses, strains and redistribution of these stresses with the spread of a plastic zone. The results of the study are a useful input for the estimation of the fatigue life of joints. Copyright (C) 1996 Elsevier Science Ltd

Non-Marcus energy gap dependence of electron transfer rate in contact ion pairs. Novel interplay between relaxation and reaction in solution

Electron transfer reactions between donor-acceptor pairs in solution and in organized media exhibit diverse behaviour. Recent experiments have indicated an interesting breakdown of the Marcus parabolic energy gap dependence in the normal regime for back electron transfer from contact ion pairs. A novel explanation of this breakdown has recently been proposed (M. Tachiya and S. Murata, J. Am. Chem. Sec., 116(1994) 2434) which attributes the breakdown to the interplay between the relaxation in the reactant well and the reaction. A particularly interesting aspect of the model is that it envisages the electron transfer in the normal regime to take place from a completely non-equilibrium condition. In this article a time dependent solution of the model is presented for the first time, after generalizing it to include a realistic initial population distribution. The decay of the contact ion pair population is completely non-exponential. This can be used to check the validity of the Tachiya-Murata model. The dynamics of electron transfer from the solvent separated ion pair, which seem to obey the Marcus relation, is exponential.

Thermomechanical generalization of partial contact in pin joints

Mechanical fasteners introduce structural weakness, still they are an essential constituent of most structures as they permit interchangeability of parts and flexible construction programs; Variable temperature operations of Aerospace and Nuclear structures make it imperative to investigate the thermoelastic behaviour of joints. This paper explores analytically similar mechanical and thermal parameters to generalise the thermomechanical behaviour of a pin joint in an isotropic Sheet for a class of configurations. This generalization enables virtually direct application of existing information regarding joints under pure mechanical loading to joints subjected to combined thermomechanical loading, thus reducing the efforts of both the analyst and the designer by an order of magnitude. Copyright (C) 1996 Published by Elsevier Science Ltd.

LaNiO3: a promising material for contact with YBa2 Cu3O7-x thin films

Epitaxial LaNiO3 metallic oxide thin films have been grown on c-axis oriented YBa2Cu3O7-delta thin films on LaAlO3 substrates by pulsed laser deposition technique and the interface formed between the two films has been examined by measuring the contact conductance of the same. The specific contact conductance of the interface measured using a modified four probe method was found to be 1.4 to 6 x 10(4) ohm(-1) cm(-2) at 77 K, There are indications that contact conductance can be brought closer to that obtained for noble metal-YBCO interface.

Effect of contact at the interface on the compressive properties of fly ash-epoxy composites

Particulate composites based on polymer matrices generally contain fillers, especially those that are abundantly available and are cheaper. The inclusion of these, besides improving the properties, makes the system costwise viable, In the present study, fly ash was tried as a filler in epoxy. The filler particle surfaces were modified using three chemical surface treatment techniques in order to elicit the effect of adhesion at the interface on the mechanical properties of these composites. The compatibilizing of the filler with the use of a silane coupling agent yielded the best compression strength values. Scanning Electron Microscopy (SEM) has been used to characterize and supplement the mechanical test data.