Initial growth and development of southern sandbur based on thermal units

Availability of basic information on weed biology is an essential tool for designing integrated management programs for agricultural systems. Thus, this study was carried out in order to calculate the base temperature (Tb) of southern sandbur (Cenchrus echinatus), as well as fit the initial growth and development of the species to accumulated thermal units (growing degree days - GDD). For that purpose, experimental populations were sown six times in summer/autumn conditions (decreasing photoperiod) and six times in winter/spring condition (increasing photoperiod). Southern sandbur phenological evaluations were carried out, on alternate days, and total dry matter was measured when plants reached the flowering stage. All the growth and development fits were performed based on thermal units by assessing five base temperatures, as well as the absence of it. Southern sandbur development was best fit with Tb = 12 ºC, with equation y = 0,0993x, where y is the scale of phenological stage and x is the GDD. On average, flowering was reached at 518 GDD. Southern sandbur phenology may be predicted by using mathematical models based on accumulated thermal units, adopting Tb = 12 ºC. However, other environmental variables may also interfere with species development, particularly photoperiod.

Growth and development of sourgrass based on days or thermal units

This work was carried out with the objective of evaluating growth and development of sourgrass (Digitaris insularis) based on days or thermal units (growing degree days - GDD). Two independent trials were developed aiming to quantify the species' phenological development and total dry matter accumulation in increasing or decreasing photoperiod conditions. Plants were grown in 4 L plastic pots, filled with commercial substrate, adequately fertilized. In each trial, nine growth evaluations were carried out, with three replicates. Phenological development of sourgrass was correctly fit to time scale in days or GDD, through linear equation of first degree. Sourgrass has slow initial growth, followed by exponential dry matter accumulation, in increasing photoperiod condition. Maximum total dry matter was 75 and 6 g per plant for increasing and decreasing photoperiod conditions, respectively. Thus, phenological development of sourgrass may be predicted by mathematical models based on days or GDD; however, it should be noted that other environmental variables interfere on the species' growth (mass accumulation), especially photoperiod.

Two point deterministic model for acquisition of in vitro pollen grain androgenetic capacity based on wheat studies

This article discusses, from the standpoint of cellular biology, the deterministic and indeterministic androgenesis theories. The role of the vacuole and of various types of stresses on deviation of the microspore from normal development and the point where androgenetic competence is acquired are examined. Based on extensive literature review and data on wheat studies from our laboratory, a model for androgenetic capacity of pollen grain is proposed. A two point deterministic model for in vitro androgenesis is our proposal for acquisition of androgenetic potential of the pollen grain: the first switch point would be early meiosis and the second switch point the uninucleate pollen stage, because the elimination of cytoplasmatic sporophytic determinants takes place at those two strategic moments. Any abnormality in this process allowing the maintenance of sporophytic informational molecules results in the absence of establishment of a gametophytic program, allowing the reactivation of the embryogenic process

Evidencing and Sharing Value with Decision Making Models in an Industrial Maintenance Network

The objective of this thesis is to concretize the potential benefits that the industrial maintenance case network could achieve through using the value-based life-cycle model and the flexible asset management model. It is also inspected what factors prevent value creation and sharing in the maintenance contract practices of the case network. This thesis is a case study which utilizes modelling. Four scenarios were developed to demonstrate value creation in the future. The data was partly provided by the collaborating company, partly gathered from public financial statement information. The results indicate that value has been created through the past maintenance of the collaborating company’s rod mill and that profitability of the collaborating company has been mostly on satisfactory level during the past few years. Potential value might be created by increasing the share of proactive maintenance of the rod mill in the future. Profitability of the network could be improved in the future through flexible asset management operations. The main obstacle for value creation and sharing seems to be the lack of sufficient trust between the network members.

Production planning and optimization of a pulp mill: introduction of the optimisation based scheduling software for pulp industry

The objective of this project was to introduce a new software product to pulp industry, a new market for case company. An optimization based scheduling tool has been developed to allow pulp operations to better control their production processes and improve both production efficiency and stability. Both the work here and earlier research indicates that there is a potential for savings around 1-5%. All the supporting data is available today coming from distributed control systems, data historians and other existing sources. The pulp mill model together with the scheduler, allows what-if analyses of the impacts and timely feasibility of various external actions such as planned maintenance of any particular mill operation. The visibility gained from the model proves also to be a real benefit. The aim is to satisfy demand and gain extra profit, while achieving the required customer service level. Research effort has been put both in understanding the minimum features needed to satisfy the scheduling requirements in the industry and the overall existence of the market. A qualitative study was constructed to both identify competitive situation and the requirements vs. gaps on the market. It becomes clear that there is no such system on the marketplace today and also that there is room to improve target market overall process efficiency through such planning tool. This thesis also provides better overall understanding of the different processes in this particular industry for the case company.

Radio-frequency-based measurement methods for bearing current analysis in induction motors

The most common reason for a low-voltage induction motor breakdown is a bearing failure. Along with the increasing popularity of modern frequency converters, bearing failures have become the most important motor fault type. Conditions in which bearing currents are likely to occur are generated as a side effect of fast du/dt switching transients. Once present, different types of bearing currents can accelerate the mechanical wear of bearings by causing deformation of metal parts in the bearing and degradation of the lubricating oil properties.The bearing current phenomena are well known, and several bearing current measurement and mitigation methods have been proposed. Nevertheless, in order to develop more feasible methods to measure and mitigate bearing currents, better knowledge of the phenomena is required. When mechanical wear is caused by bearing currents, the resulting aging impact has to be monitored and dealt with. Moreover, because of the stepwise aging mechanism, periodically executed condition monitoring measurements have been found ineffective. Thus, there is a need for feasible bearing current measurement methods that can be applied in parallel with the normal operation of series production drive systems. In order to reach the objectives of feasibility and applicability, nonintrusive measurement methods are preferred. In this doctoral dissertation, the characteristics and conditions of bearings that are related to the occurrence of different kinds of bearing currents are studied. Further, the study introduces some nonintrusive radio-frequency-signal-based approaches to detect and measure parameters that are associated with the accelerated bearing wear caused by bearing currents.

Headache complaints associated with psychiatric comorbidity in a population-based sample

The objective of the present study was to determine the frequency at which people complain of any type of headache, and its relationship with sociodemographic characteristics and psychiatric comorbidity in São Paulo, Brazil. A three-step cluster sampling method was used to select 1,464 subjects aged 18 years or older. They were mainly from families of middle and upper socioeconomic levels living in the catchment area of Instituto de Psiquiatria. However, this area also contains some slums and shantytowns. The subjects were interviewed using the Brazilian version of the Composite International Diagnostic Interview version 1.1. (CIDI 1.1) by a lay trained interviewer. Answers to CIDI 1.1 questions allowed us to classify people according to their psychiatric condition and their headaches based on their own ideas about the nature of their illness. The lifetime prevalence of "a lot of problems with" headache was 37.4% (76.2% of which were attributed to use of medicines, drugs/alcohol, physical illness or trauma, and 23.8% attributed to nervousness, tension or mental illness). The odds ratio (OR) for headache among participants with "nervousness, tension or mental illness" was elevated for depressive episodes (OR, 2.1; 95%CI, 1.4-3.4), dysthymia (OR, 3.4; 95%CI, 1.6-7.4) and generalized anxiety disorder (OR, 4.3; 95%CI, 2.1-8.6), when compared with patients without headache. For "a lot of problems with" headaches attributed to medicines, drugs/alcohol, physical illness or trauma, the risk was also increased for dysthymia but not for generalized anxiety disorder. These data show a high association between headache and chronic psychiatric disorders in this Brazilian population sample.

Capecitabine maintenance therapy in patients with recurrent or metastatic breast cancer

Our objective was to investigate the efficacy and safety of capecitabine maintenance therapy (CMT) after capecitabine-based combination chemotherapy in patients with metastatic breast cancer. The clinical data of 139 metastatic breast cancer patients treated from March 2008 to May 2012 with capecitabine-based combination chemotherapy were retrospectively analyzed. When initial disease control was achieved by the combination chemotherapy, we used CMT for 50 patients, while 37 patients were treated with a different (non-CMT) maintenance therapy. We compared time to progression (TTP), objective response rate, disease control rate, clinical benefit rate, and safety of the two groups, and a sub-group analysis was performed according to pathological characteristics. Sixty-four percent of the patients received a median of six cycles of a docetaxel+capecitabine combination chemotherapy regimen (range 1-45); the median TTP (MTTP) for the complete treatment was 9.43 months (95%CI=8.38-10.48 months) for the CMT group and 4.5 months (95%CI=4.22-4.78 months; P=0.004) for the non-CMT group. The MTTPs for the maintenance therapies administered after the initial capecitabine combined chemotherapy were 4.11 months (95%CI=3.34-4.87 months) for the CMT group and 2.0 months (95%CI=1.63-2.38 months) for the non-CMT group. Gastrointestinal side effects, decreased white blood cells and palmar-plantar erythrodysesthesia were the main adverse reactions experienced with the combination chemotherapies, CMT and non-CMT treatments. No significant differences in the incidence of adverse reactions were detected in the CMT and non-CMT patients. After initial disease control was achieved with the capecitabine-based combination chemotherapy, CMT can significantly prolong TTP rates with a favorable safety profile.

Effect of JJYMD-C, a novel synthetic derivative of gallic acid, on proliferation and phenotype maintenance in rabbit articular chondrocytes in vitro

Tissue engineering encapsulated cells such as chondrocytes in the carrier matrix have been widely used to repair cartilage defects. However, chondrocyte phenotype is easily lost when chondrocytes are expanded in vitro by a process defined as “dedifferentiation”. To ensure successful therapy, an effective pro-chondrogenic agent is necessary to overcome the obstacle of limited cell numbers in the restoration process, and dedifferentiation is a prerequisite. Gallic acid (GA) has been used in the treatment of arthritis, but its biocompatibility is inferior to that of other compounds. In this study, we modified GA by incorporating sulfamonomethoxine sodium and synthesized a sulfonamido-based gallate, JJYMD-C, and evaluated its effect on chondrocyte metabolism. Our results showed that JJYMD-C could effectively increase the levels of the collagen II, Sox9, and aggrecan genes, promote chondrocyte growth, and enhance secretion and synthesis of cartilage extracellular matrix. On the other hand, expression of the collagen I gene was effectively down-regulated, demonstrating inhibition of chondrocyte dedifferentiation by JJYMD-C. Hypertrophy, as a characteristic of chondrocyte ossification, was undetectable in the JJYMD-C groups. We used JJYMD-C at doses of 0.125, 0.25, and 0.5 µg/mL, and the strongest response was observed with 0.25 µg/mL. This study provides a basis for further studies on a novel agent in the treatment of articular cartilage defects.

On site measurements of DC link electrolytic capacitor bank of frequency converter using constant DC magnetization of the motor

Preventive maintenance of frequency converters has been based on pre-planned replace-ment of wearing or ageing components. Exchange intervals follow component life-time expectations which are based on empirical knowledge or schedules defined by manufac-turer. However, the lifetime of a component can vary significantly, because drives are used in very different operating environments and applications. The main objective of the research was to provide information on methods, i.e. how in-verter's operating condition can be measured reliably under field conditions. At first, the research focused on critical components such as current transducers, IGBTs and DC link capacitor bank, because these aging have already been identified. Of these, the DC link capacitor measurement method was selected for closer examination. With this method, the total capacitance and its total series resistance can be measured. The suitability of the measuring procedure was estimated on the basis of practical measurements. The research was made by using so called triangulation method, including a literature review, simulations and practical measurements. Based on the results, the new measu-rement method seems suitable with some reservations to practical measurements. How-ever, the measuring method should be further developed in order to improve its reliability.

Sähkökemiallisten mittausmenetelmien hyödyntäminen optimaalisessa kunnossapidossa

Sähkökemiallisia korroosionopeuden mittausmenetelmiä, yhdistettynä rakennema-teriaalien ohenemaseurantaan, on edelleen harvoin hyödynnetty toimilaitteiden ja rakenteiden elinkaarihallintaan liittyvässä kunnossapidossa. Tässä diplomityössä selvitetään sähkökemiallisten korroosiomittausten käyttöä optimaalisen kunnossapidon apuvälineenä. Työssä selvitetään erityisesti sähkö-kemiallisten mittausjärjestelmien soveltuvuutta voimalaitosten tulistinalueen kor-roosion sekä kylmäpään happo- ja vesikastepisteen mittaamiseen ja kriittisen kas-tepistelämpötilan määrittämiseen. Lisäksi selvitetään mittausten soveltuvuut-ta voimalaitosten polttoainehallinnan optimointiin sekä teknis-taloudellisuuteen perustuvaan prosessin säätämiseen. / Electrochemical corrosion rate measuring methods have been used years in indus-trial maintenance research. Still electrochemical corrosion rate measurement methods are rarely used in the industrial maintenance work related to the life cycle of equipment and structures. This work will study the suitability and use of electrochemical corrosion meas-urements in the optimum maintenance. The work will specifically address the suitability of electrochemical measuring systems for power plants super heater and the cold end corrosion monitoring. Study focus on acid and water dew point monitoring and the determination of the critical dew point temperature. In addi-tion, study the suitability of measurements of power plant fuel management as well as techno-economics based on the process of adjustment.

Developing asset management in district heating and cooling business in a large energy company

The purpose of this Master´s Thesis is to develop asset management and its practices in case company. District heating and cooling systems operated by case company around Finland, Sweden, Poland and the Baltics form an enormous-sized asset base where some parts are starting to reach their end of life-cycles. Large-sized asset renewal actions are under discussion and maintenance spending is increasing. Financially justified decisions in changing business environment are needed. Asset management is one of the most important concepts for production organization which operates with capital-intensive production assets. Organizations profitability is highly dependent on assets´ performance. Such assets, like district heating and cooling systems, should be utilized as efficiently as possible within their life-cycles but also maintained and renewed optimally. In this qualitative thesis, empirical interview study was conducted to describe the current situation on how the assets are managed in the case company and to examine the readiness to implement a new, risk-based solution. Asset management revealed to be a very well-known concept. From proposed risk-based asset management point of view, several key observations were made. It was seen as a suitable solution, but further development will be needed. Based on the need and findings, several key processes and frameworks were created and also tested with a case study. Assets` condition monitoring should be improved, which would have a positive impact on event probability assessment. Risk acceptance is also a thing to be discussed further. When the evaluation becomes fluent in single investment cases, portfolio-level expansion should be considered and started. As a result, thesis proposes a solution how risk-based asset management could be performed practically in a capital-intensive case company in order to optimize the maintenance spending in a long run. Created practical framework is made universal: similar principles can be applied into multiple cases in case company but also in other energy companies. Risk-based asset management`s benefits could be utilized best in portfolio-level optimization where the capital would be invested to the most important objects from total risk point of view. Eventually, such approach would allow case company to optimize capital spending in a situation where funds are not adequate to cover all the mandatory needs and prioritization between the investment alternatives will truly be needed.

A classroom-based investigation of reciprocal teaching at the grade seven level

This study assessed the effectiveness of a reciprocal teaching program as a method of teaching reading comprehension, using narrative text material in a t.ypical grade seven classroom. In order to determine the effectiveness of the reciprocal teaching program, this method was compared to two other reading instruction approaches that, unlike rcciprocal teaching, did not include social interaction components. Two intact grade scven classes, and a grade seven teacher, participated in this study. Students were appropriately assigned to three treatment groups by reading achievement level as determined from a norm-referenced test. Training proceeded for a five week intervention period during regularly scheduled English periods. Throughout the program curriculum-based tests were administered. These tests were designed to assess comprehension in two distinct ways; namely, character analysis components as they relate to narrative text, and strategy use components as they contribute to student understanding of narrative and expository text. Pre, post, and maintenance tests were administered to measure overall training effects. Moreover, during intervention, training probes were administered in the last period of each week to evaluate treatment group performance. AU curriculum-based tests were coded and comparisons of pre, post, maintenance tests and training probes were presented in graph form. Results showed that the reciprocal group achieved some improvement in reading comprehension scores in the strategy use component of the tests. No improvements were observed for the character analysis components of the curriculum-based tests and the norm-referenced tests. At pre and post intervention, interviews requiring students to respond to questions that addressed metacomprehension awareness of study strategies were administered. The intelviews were coded and comparisons were made between the two intelVicws. No significant improvements were observed regarding student awareness of ten identified study strategies . This study indicated that reciprocal teaching is a viable approach that can be utilized to help students acquire more effective comprehension strategies. However, the maximum utility of the technique when administered to a population of grade seven students performing at average to above average levels of reading achievement has yet to be determined. In order to explore this issue, the refinement of training materials and curriculum-based measurements need to be explored. As well, this study revealed that reciprocal teaching placed heavier demands on the classroom teacher when compared to other reading instruction methods. This may suggest that innovative and intensive teacher training techniques are required before it is feasible to use this method in the classroom.

Evolutionary Origin and Maintenance of Sociality in the Small Carpenter Bees

Many arthropods exhibit behaviours precursory to social life, including adult longevity, parental care, nest loyalty and mutual tolerance, yet there are few examples of social behaviour in this phylum. The small carpenter bees, genus Ceratina, provide important insights into the early stages of sociality. I described the biology and social behaviour of five facultatively social species which exhibit all of the preadaptations for successful group living, yet present ecological and behavioural characteristics that seemingly disfavour frequent colony formation. These species are socially polymorphic with both / solitary and social nests collected in sympatry. Social colonies consist of two adult females, one contributing both foraging and reproductive effort and the second which remains at the nest as a passive guard. Cooperative nesting provides no overt reproductive benefits over solitary nesting, although brood survival tends to be greater in social colonies. Three main theories explain cooperation among conspecifics: mutual benefit, kin selection and manipulation. Lifetime reproductive success calculations revealed that mutual benefit does not explain social behaviour in this group as social colonies have lower per capita life time reproductive success than solitary nests. Genetic pedigrees constructed from allozyme data indicate that kin selection might contribute to the maintenance of social nesting -, as social colonies consist of full sisters and thus some indirect fitness benefits are inherently bestowed on subordinate females as a result of remaining to help their dominant sister. These data suggest that the origin of sociality in ceratinines has principal costs and the great ecological success of highly eusociallineages occurred well after social origins. Ecological constraints such as resource limitation, unfavourable weather conditions and parasite pressure have long been considered some of the most important selective pressures for the evolution of sociality. I assessed the fitness consequences of these three ecological factors for reproductive success of solitary and social colonies and found that nest sites were not limiting, and the frequency of social nesting was consistent across brood rearing seasons. Local weather varied between seasons but was not correlated with reproductive success. Severe parasitism resulted in low reproductive success and total nest failure in solitary nests. Social colonies had higher reproductive success and were never extirpated by parasites. I suggest that social nesting represents a form of bet-hedging. The high frequency of solitary nests suggests that this is the optimal strategy when parasite pressure is low. However, social colonies have a selective advantage over solitary nesting females during periods of extreme parasite pressure. Finally, the small carpenter bees are recorded from all continents except Antarctica. I constructed the first molecular phylogeny of ceratinine bees based on four gene regions of selected species covering representatives from all continents and ecological regions. Maximum parsimony and Bayesian Inference tree topology and fossil dating support an African origin followed by an Old World invasion and New World radiation. All known Old World ceratinines form social colonies while New World species are largely solitary; thus geography and phylogenetic inertia are likely predictors of social evolution in this genus. This integrative approach not only describes the behaviour of several previously unknown or little-known Ceratina species, bu~ highlights the fact that this is an important, though previously unrecognized, model for studying evolutionary transitions from solitary to social behaviour.

Prescription channeling of COX-2 inhibitors and traditional nonselective nonsteroidal anti-inflammatory drugs: a population-based case–control study

Affiliation: Faculté de pharmacie, Université de Montréal