Physical-chemical and thermodynamic analyses of ethanol steam reforming for hydrogen production

Steam reforming is the most usual method of hydrogen production due to its high production efficiency and technological maturity the use of ethanol for this purpose is an interesting option because it is a renewable and environmentally friendly fuel. The objective of this article is to present the physical-chemical, thermodynamic, and exergetic analysis of a steam reformer of ethanol, in order to produce 0.7 Nm(3)/h of hydrogen as feedstock of a 1 kW PEMFC the global reaction of ethanol is considered. Superheated ethanol reacts with steam at high temperatures producing hydrogen and carbon dioxide, depending strongly on the thermodynamic conditions of reforming, as well as on the technical features of the reformer system and catalysts. The thermodynamic analysis shows the feasibility of this reaction in temperatures about 206 degrees C. Below this temperature, the reaction trends to the reactants. The advance degree increases with temperature and decreases with pressure. Optimal temperatures range between 600 and 700 degrees C. However, when the temperature attains 700 degrees C, the reaction stability occurs, that is, the hydrogen production attains the limit. For temperatures above 700 degrees C, the heat use is very high, involving high costs of production due to the higher volume of fuel or electricity used. The optimal pressure is 1 atm., e.g., at atmospheric pressure. The exergetic analysis shows that the lower irreversibility is attained for lower pressures. However the temperature changes do not affect significantly the irreversibilities. This analysis shows that the best thermodynamic conditions for steam reforming of ethanol are the same conditions suggested in the physical-chemical analysis.

Physico-chemical and harvest time alterations in pineapple fruits Smooth Cayenne caused by paclobutrazol

O objetivo deste trabalho foi avaliar o efeito de um inibidor da diferenciação floral nas características físico-químicas dos frutos do abacaxizeiro, bem como, no período de colheita. Utilizou-se paclobutrazol a 100, 150 e 200 mg L-1 aplicados 2, 3 ou 4 vezes, em plantas de abacaxi cv. Smooth Cayenne. Os tratamentos não influenciaram nas características químicas dos frutos, e mesmo alterando algumas características físicas, os frutos permaneceram dentro dos padrões de qualidade para comercialização. O período de colheita foi ampliado em todos os tratamentos comparando-se com o controle, porém, 150 mg L-1 aplicados 2 vezes promoveu melhor resultado analisando-se em conjunto a época de colheita com a massa fresca do fruto.

Chemical and structural characterization of V2O5/TiO2 catalysts

A series of V2O5/TiO2 samples was synthesized by sol-gel and impregnation methods with different contents of vanadia. These samples were characterized by x-ray diffraction (XRD), Raman spectroscopy, x-ray photoelectron spectroscopy (XPS), and electronic paramagnetic resonance (EPR). XRD detected rutile as the predominant phase for pure TiO2 prepared by the sol-gel method. The structure changed to anatase when the vanadia loading was increased. Also, anatase was the predominant phase for samples obtained by the impregnation method. Raman measurements identified two species of surface vanadium: monomeric vanadyl (V4+) and polymeric vanadates (V5+). XPS results indicated that Ti ions were in octahedral position surrounded by oxygen ions. The V/Ti atomic ratios showed that V ions were highly dispersed on the vanadia/titania surface obtained by the sol-gel method. EPR analysis detected three V4+ ion types: two of them were located in axially symmetric sites substituting for Ti4+ ions in the rutile structure, and the third one was characterized by magnetically interacting V4+ ions in the form of pairs or clusters. A partial oxidation of V4+ to V5+ was evident from EPR analysis for materials with higher concentrations of vanadium. (C) 2001 American Vacuum Society.

The use of biodiversity as source of new chemical entities against defined molecular targets for treatment of malaria, tuberculosis, and T-cell mediated diseases: a review

The modern approach to the development of new chemical entities against complex diseases, especially the neglected endemic diseases such as tuberculosis and malaria, is based on the use of defined molecular targets. Among the advantages, this approach allows (i) the search and identification of lead compounds with defined molecular mechanisms against a defined target (e.g. enzymes from defined pathways), (ii) the analysis of a great number of compounds with a favorable cost/benefit ratio, (iii) the development even in the initial stages of compounds with selective toxicity (the fundamental principle of chemotherapy), (iv) the evaluation of plant extracts as well as of pure substances. The current use of such technology, unfortunately, is concentrated in developed countries, especially in the big pharma. This fact contributes in a significant way to hamper the development of innovative new compounds to treat neglected diseases. The large biodiversity within the territory of Brazil puts the country in a strategic position to develop the rational and sustained exploration of new metabolites of therapeutic value. The extension of the country covers a wide range of climates, soil types, and altitudes, providing a unique set of selective pressures for the adaptation of plant life in these scenarios. Chemical diversity is also driven by these forces, in an attempt to best fit the plant communities to the particular abiotic stresses, fauna, and microbes that co-exist with them. Certain areas of vegetation (Amazonian Forest, Atlantic Forest, Araucaria Forest, Cerrado-Brazilian Savanna, and Caatinga) are rich in species and types of environments to be used to search for natural compounds active against tuberculosis, malaria, and chronic-degenerative diseases. The present review describes some strategies to search for natural compounds, whose choice can be based on ethnobotanical and chemotaxonomical studies, and screen for their ability to bind to immobilized drug targets and to inhibit their activities. Molecular cloning, gene knockout, protein expression and purification, N-terminal sequencing, and mass spectrometry are the methods of choice to provide homogeneous drug targets for immobilization by optimized chemical reactions. Plant extract preparations, fractionation of promising plant extracts, propagation protocols and definition of in planta studies to maximize product yield of plant species producing active compounds have to be performed to provide a continuing supply of bioactive materials. Chemical characterization of natural compounds, determination of mode of action by kinetics and other spectroscopic methods (MS, X-ray, NMR), as well as in vitro and in vivo biological assays, chemical derivatization, and structure-activity relationships have to be carried out to provide a thorough knowledge on which to base the search for natural compounds or their derivatives with biological activity.

Physical-chemical, caloric and sensory characterization of light jambolan (Syzygium cumini Lamarck) jelly

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Chemical and sensory characteristics of pulp and peel 'cajá-manga' (Spondias cytherea Sonn.) jelly

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Chemical composition of Rhodocyclus gelatinosus biomass produced in poultry slaughterhouse wastewater

Rhodocyclus gelatinosus R1 foi cultivado fotoautotroficamente em águas residuais de abatedouro de aves dentro de colunas de vidro (90x670 mm) durante sete dias a 31 ± 4ºC, sob anaerobiose e intensidade luminosa fornecida pela luz do dia e por três lâmpadas incandescentes (100W) mais quatro lâmpadas fluorescentes (40W). O cultivo obtido foi centrifugado (4.500xg/20 min) e liofilizado, originando a biomassa bacteriana, que continha 7,1% de umidade. A determinação da composição centesimal indicou (base seca) 67,6% de proteína bruta, 27,6% de carboidratos totais, 0,6% de lipídeos e 4,2% de cinzas. A composição em aminoácidos da fração protéica da biomassa mostrou-se semelhante à relatada na literatura para Rhodocyclus gelatinosus e para outras bactérias fotossintetizantes. A redução na DQO do efluente após o cultivo e a retirada da biomassa foi da ordem de 90%. A valiosa composição química da biomassa de Rhodocyclus gelatinosus R1 e o alto conteúdo em aminoácidos essenciais indicam o uso potencial desse produto na suplementação de ração para aves.

Yellow passion fruit seed oil (Passiflora edulis f. flavicarpa): physical and chemical characteristics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Soft chemical deposition of BiFeO3 multiferroic thin films

BiFeO3 thin films free of secondary phases were obtained by the soft chemical solution on Pt(111)/Ti/SiO2/Si substrates after annealing at 500 degrees C for 2 h. The film grown in the (100) direction presented a remanent polarization P-r of 31 mu C/cm(2) at room temperature. Electrical measurements using both quasistatic hysteresis and pulsed polarization confirm the existence of ferroelectricity with a switched polarization of 60-70 mu C/cm(2), Delta P=(P-*-P). Low leakage conduction and an out-of-plane piezoelectric (d(3)) coefficient of 40 pm/V were obtained by the improvement of preparation technology.

Effect of chemical pretreatment on the physical properties of dehydrated grapes

The effects of chemical pretreatment and air drying temperature on drying kinetics, shrinkage, density and rehydration ratio of grapes were determined at various moisture contents. It was observed that the chemical pretreatment employed - a solution of 2% CaCO3 with 0 to 3% ethyl oleate - increased considerably the drying rate. It was established that the shrinkage increased with drying temperature between 40 to 80 degrees C and decreased with increasing concentration of ethyl oleate in the chemical pretreatment solution.

Synthesis of SnO2 by chemical routes and its use in varistors production

Tin oxide, SnO2. is a very used compound in industry and one of its uses is as varistor. For the current requirements of the technology is necessary a strict control of the chemical purity and the particle size of the raw material; for that reason the great interest that exists at the moment to develop synthesis methods that allow to get these requirements. In this work, ceramic powders of the Sn-Co-Nb-Ti-Al system using the controlled precipitation and polymeric precursor (Pechini) methods were synthesized. The raw material obtained was characterized using X-ray diffraction (XRD), thermal analysis (DTA/FG) and scanning electron microscopy (SEM). The sintering samples shown a good varistor behavior with non-linear coefficient (alpha) values similar to 22, and Er 2083 V/cm(2). (c) 2007 Elsevier Ltd. All rights reserved.

Development of a micro-heat exchanger with stacked plates using LTCC technology

A green ceramic tape micro-heat exchanger was developed using Low Temperature Co-fired Ceramics technology (LTCC). The device was designed by using Computational Aided Design software and simulations were made using a Computational Fluid Dynamics package (COMSOL Multiphysics) to evaluate the homogeneity of fluid distribution in the microchannels. Four geometries were proposed and simulated in two and three dimensions to show that geometric details directly affect the distribution of velocity in the micro-heat exchanger channels. The simulation results were quite useful for the design of the microfluidic device. The micro-heat exchanger was then constructed using the LTCC technology and is composed of five thermal exchange plates in cross-flow arrangement and two connecting plates, with all plates stacked to form a device with external dimensions of 26 x 26 x 6 mm(3).

Charqui meats are hurdle technology meat products

Charqui meat is a tropical intermediate meat product formulated using hurdle technology, a concept described by Leistner (1,2). Salt, sodium nitrite, dehydration, and packaging are hurdles sequentially applied to inhibit deteriorating microorganisms with the possibility of selecting desirable microbiota. This would characterize charqui and its derivatives as fermented meat products. This paper reviews biochemical, physico-chemical, and ultrastructural changes that occur during processing of charquis.

Optimization of neutral hydrolysis reaction of post-consumer PET for chemical recycling

The neutral hydrolysis reaction of post-consumer poly(ethylene terephthalate) in solid state was studied through the reaction of the polymer with water at the molar ratio 1:91 with autogenous pressure. Two sizes of post-consumer PET flakes and temperatures of 135 °C, 170°C and 205°C with pressures of 4.0 atm, 7.5 atm and 13.5 atm, respectively, were considered. With reaction time equal to 6h, the method reached 99% depolymerization at 205°C, 8.2% at 170 °C and 1.7% at 135°C. The reaction extension was measured by separating the terephthalic acid formed in the process and calculating by gravimetry how much material could still be reacted. Through the viscosimetry of diluted, solutions and the counting of carboxylic end groups in the remaining material from the gravimetric assay, it was possible to suggest that the reaction occurs randomly and in the whole volume of the polymeric particle and not solely on the surface. The terephthalic acid obtained and then purified was characterized by elemental analysis, magnetic nuclear resonance, size and panicle size distribution and spectrophotometry in the visible spectrum, and it was similar to the petrochemical equivalent, with purity recorded in carbon base equal to 99.9%.

Farming technology, biochemistry characterization, and protective effects of culinary-medicinal mushrooms Agaricus brasiliensis S. Wasser et al. and Lentinus edodes (Berk.) Singer: Five years of research in Brazil

The biotechnology, biochemical characterization, and protective effects of the himematsutake and shiitake mushrooms were studied for the Thematic Project, from 1998 to 2003. A new species, Agaricus Brasiliens is Wasser et al. (= A. blazei Murrill ss. Heinem.), was proposed for the cultivated lineages in Brazil. Interactions among lineages, substrates, casing layers, and fructification inductions (temperature alternations) significantly increased the productivity of A. brasiliensis in Brazil (from 40 g to 200 g of fresh mushroom kg -1 moist compost). However, pests and diseases (mainly Sciaridae flies and false truffle), drastically reduced the productivity of A. brasiliensis (below 50 g kg -1). Biochemically for each mushroom species, the polar extracts, no polars, and medium polarity presented the same organic substances; however, their concentrations differed as a result of the lineages, maturation of the fruit bodies, and cultivation conditions. In this aspect, concentration of linoleic acid in A. brasiliensis (added to animal food) was related directly to the chemical protection against carcinogenic drugs in mice. Aqueous extracts of Lentinus edodes (= Lentinula edodes (Berk.) Pegler) and A. brasiliensis may be preventive chemical protectors against mutagenic and carcinogenic drugs, depending on the lineage and extraction method (tea or juice). However, immunomodulator effects and tumor reduction were only observed with concentrated fractions (hexanic, methanolic, and ATF extracts). Aqueous extracts of A. brasiliensis and L. edodes have antibiotic-like substances and substances able to act as elicitors of resistance responses in some plants (local and systemic) and show a potential to be used in the alternative control of plant pathogens. © 2005 by Begell House, Inc.