Transferring QTL technology to the pig breeding industry (PigQTech) - a demonstration project

The aim of the project has been to demonstrate how the farm animal breeding industry can utilise gene mapping technology to accelerate genetic improvement. Previous theoretical studies had suggested that the use of marker assisted selection could potentially increase the annual improvement for quantitative traits like backfat with about 10% and for more difficult traits such as meat quality and reproduction by as much as 40-60% compared with existing technology. The work has comprised two major tasks: 1. Commercially relevant populations have been screened for segregation at QTLs identified in experimental populations. The aim has been to establish optimal strategies for QTL detection in commercial pig populations and the extent to which QTLs explaining major phenotypic differences between divergent lines used in experimental studies also explain quantitative variation within commercial lines. The results are important for specifying future strategies for finding economically valuable QTLs. 2. Marker assisted backcrossing has been used to demonstrate how a QTL allele can be introgressed from one breed to another. The work has focused on the major fatness QTL on pig chromosome 4 previously identified in a wild pig/Large White intercross. The end result was not designed to be a commercially viable product in its own right, but the process has validated a number of points of major importance for the exploitation of QTLs in livestock.

Incorporating jurisdiction issues into regional carbon accounts under production and consumption accounting principles

Despite increased public interest, policymakers have been slow to enact targets based on limiting emissions under full consumption accounting measures (such as carbon footprints). This paper argues that this may be due to the fact that policymakers in one jurisdiction do not have control over production technologies used in other jurisdictions. The paper uses a regional input-output framework and data derived on carbon dioxide emissions by industry (and households) to examine regional accountability for emissions generation. In doing so, we consider two accounting methods that permit greater accountability of regional private and public (household and government) final consumption as the main driver of regional emissions generation, while retaining focus on the local production technology and consumption decisions that fall under the jurisdiction of regional policymakers. We propose that these methods permit an attribution of emissions generation that is likely to be of more use to regional policymakers than a full global footprint analysis.

The Changing Inter-Industry Wage Structure of the Organised Manufacturing Sector in India, 1973-74 to 2003-04

This study examines the inter-industry wage structure of the organised manufacturing sector in India for the period 1973-74 to 2003-04 by estimating the growth of average real wages for production workers by industry. In order to estimate the growth rates, the study adopts a methodological framework that differs from other studies in that the time series properties of the concerned variables are closely considered in order to obtain meaningful estimates of growth that are unbiased and (asymptotically) efficient. Using wage data on 51 manufacturing industries at three digit level of the National Industrial Classification 1998 (India), our estimation procedure obtains estimates of growth of real wages per worker that are deterministic in nature by accounting for any potential structural break(s). Our findings show that the inter-industry wage structure in India has changed a lot in the period 1973-74 to 2003-04 and that it provides some evidence that the inter-industry wage differences have become more pronounced in the post-reforms period. Thus this paper provides new evidence from India on the need to consider the hypothesis that industry affiliation is potentially an important determinant of wages when studying any relationship between reforms and wages.

Influenza A virus infection of healthy piglets in an abattoir in Brazil: animal-human interface and risk for interspecies transmission

Asymptomatic influenza virus infections in pigs are frequent and the lack of measures for controlling viral spread facilitates the circulation of different virus strains between pigs. The goal of this study was to demonstrate the circulation of influenza A virus strains among asymptomatic piglets in an abattoir in Brazil and discuss the potential public health impacts. Tracheal samples (n = 330) were collected from asymptomatic animals by a veterinarian that also performed visual lung tissue examinations. No slaughtered animals presented with any noticeable macroscopic signs of influenza infection following examination of lung tissues. Samples were then analysed by reverse transcription-polymerase chain reaction that resulted in the identification of 30 (9%) influenza A positive samples. The presence of asymptomatic pig infections suggested that these animals could facilitate virus dissemination and act as a source of infection for the herd, thereby enabling the emergence of influenza outbreaks associated with significant economic losses. Furthermore, the continuous exposure of the farm and abattoir workers to the virus increases the risk for interspecies transmission. Monitoring measures of swine influenza virus infections and vaccination and monitoring of employees for influenza infection should also be considered. In addition regulatory agencies should consider the public health ramifications regarding the potential zoonotic viral transmission between humans and pigs.

The use of derivatives in the Spanish mutual fund industry

We study the use of derivatives in the Spanish mutual fund industry. The picture that emerges from our analysis is rather negative. In general, the use of derivatives does not improve the performance of the funds. In only one out of eight categories we find some (very weak and not robust) evidence of superior performance. In most of the cases users significantly underperform non users. Furthermore, users do not seem to exhibit superior timing or selectivity skills either, but rather the contrary. This bad performance is only partially explained by the larger fees funds using derivatives charge. Moreover,we do not find evidence of derivatives being used for hedging purposes. We do find evidence of derivatives being used for speculation. But users in only one category exhibit skills as speculators. Finally, we find evidence of derivatives being used to manage the funds cash inflows and outflows more efficiently.

Endogeneous matching in university-industry collaboration: Theory and empirical evidence from the UK

We develop a two-sided matching model to analyze collaboration between heterogeneousacademics and firms. We predict a positive assortative matching in terms of both scientificability and affinity for type of research, but negative assortative in terms of ability on one sideand affinity in the other. In addition, the most able and most applied academics and the mostable and most basic firms shall collaborate rather than stay independent. Our predictionsreceive strong support from the analysis of the teams of academics and firms that proposeresearch projects to the UK's Engineering and Physical Sciences Research Council.

A Comparative Study: Service Animals and Emotional Support Animals under the Fair Housing Act and the Americans with Disabilities Act & An Overview of Assistance Animal Laws of Select States, April 18, 2010

The Americans with Disabilities Act (ADA) and the Fair Housing Act (FHA) prohibit discrimination on the basis of disability and govern the use of service or emotional support animals in places where pets may not be permitted. However, courts have been struggling with how to define and treat animals that qualify for protection under each law. This has created confusion as to what rights and duties are owed disabled persons and the animals that live with or accompany them. This essay attempts to clarify these two federal laws with regard to service or emotional support animals and the differing parties‘ rights and interests. It also includes an overview of select state laws that govern assistance animals of all types and our recommendations for enhancing the Iowa Civil Rights Act.

Advances in research and development of mango industry

World mango production is spread over 100 countries that produce over 34.3 million tons of fruit annually. Eighty percent of this production is based in the top nine producing nations that also consume upward of 90% of their production domestically. One to 2 percent of fruit is traded internationally in to markets in the European Community, USA, Arabian Peninsula and Asia. This paper outlines some of the recent research and development advances in mango breeding and genomics, rootstock development, disease management and harvest technologies that are influencing the production and quality of mango fruit traded domestically and internationally.

Integration of Economics into Life Cycle Assessment in the Finnish Pulp and Paper Industry

Taloudellisen laskennan yhdistäminen elinkaariarviointiin (LCA) on alkanut kiinnostaa eri teollisuuden aloja maailmanlaajuisesti viime aikoina. Useat LCA-tietokoneohjelmat sisältävät kustannuslaskentaominaisuuksia ja yksittäiset projektit ovat yhdistäneet ympäristö- ja talouslaskentamenetelmiä. Tässä projektissa tutkitaan näiden yhdistelmien soveltuvuutta suomalaiselle sellu- ja paperiteollisuudelle, sekä kustannuslaskentaominaisuuden lisäämistä KCL:n LCA-ohjelmaan, KCL-ECO 3.0:aan. Kaikki tutkimuksen aikana löytyneet menetelmät, jotka yhdistävät LCA:n ja taloudellista laskentaa, on esitelty tässä työssä. Monet näistä käyttävät elinkaarikustannusarviointia (LCCA). Periaatteessa elinkaari määritellään eri tavalla LCCA:ssa ja LCA:ssa, mikä luo haasteita näiden menetelmien yhdistämiselle. Sopiva elinkaari tulee määritellä laskennan tavoitteiden mukaisesti. Työssä esitellään suositusmenetelmä, joka lähtee suomalaisen sellu- ja paperiteollisuuden erikoispiirteistä. Perusvaatimuksena on yhteensopivuus tavanomaisesti paperin LCA:ssa käytetyn elinkaaren kanssa. Menetelmän yhdistäminen KCL-ECO 3.0:aan on käsitelty yksityiskohtaisesti.

Creating a Performance Measurement System for Accounting Services of Large Paper Company

The main objective of this research is creating a performance measurement system for accounting services of a large paper industry company. In this thesis there are compared different performance measurement system and then selected two systems, which are presented and compared more detailed. Performance Prism system is the used framework in this research. Performance Prism using success maps to determining objectives. Model‟s target areas are divided into five groups: stakeholder satisfaction, stakeholder contribution, strategy, processes and capabilities. The measurement system creation began by identifying stakeholders and defining their objectives. Based on the objectives are created success map. Measures are created based on the objectives and success map. Then is defined needed data for measures. In the final measurement system, there are total just over 40 measures. Each measure is defined specific target level and ownership. Number of measures is fairly large, but this is the first version of the measurement system, so the amount is acceptable.

Subjectivity in the valuation : Case study on the Finnish biotechnology industry

The thesis combines valuation and behavioral economics literature, which is not common among the Finnish management accounting research. Furthermore, the valuation is studied in biotechnology context and those type of studies are rather rare as well. The thesis studies the valuation in the Finnish biotechnology industry. The concepts of behavioral finance are employed in the empirical part of the study to explore decision-makers’ behavior in valuation processes. The main interest of this study is to explore how subjectivity of a decision-maker affects the valuation in the biotechnology industry. The valuation is studied from two perspectives. First, what is the best valuation model for biotechnology companies suggested by the valuation literature? Second, how the valuation in biotechnology industry is done in practice and how the decision-makers subjectivity affects the valuation? The literature review aims at seeking the best valuation model. The real options were found to be the most suitable valuation model for biotechnology companies, especially in the early stages of product development. The real option’s ability to take the value of the inherent options into account results in theoretically most correct valuations. The only disadvantage is the model’s complexity when compared to other models, such as discounted cash flow models. The empirical part of the study consists of a case study, which examines the valuation practices of the Finnish biotechnology companies. When it comes to the valuation models used in practice, it was found that the companies were using rather simple valuation models, which was due to two reasons. First, the interviewees did not believe in the valuation models and second, they were familiar neither with the most sophisticated models nor with all the theoretical aspects of the models they were using. The material for the study was collected with theme interviews. Four CEO’s of highly successful Finnish biotechnology companies. Strong signs of the decision-makers’ subjectivity in valuation were observed. Most obvious were the signs of framing. Furthermore, herding, excessive optimism, and overconfidence were present. All the behavioral concepts observed most likely have a severe effect on the valuation. As a result, the valuation can easily become overly optimistic, which leads to overvalued investments and to continuation of already unprofitable projects. Framing had the strongest evidence. If the product being valued is framed successfully, the risk of overvaluation is high, thus a strong belief can justify almost any value.

Applications of augmented reality for sales in apparel industry in Russia

The sustainable growth of video interactivity technologies on different platforms in the lasts years opens good prospects for augmented reality technology adoption on different markets. In the end of 2011 there was an improvement in technology which allows building the 3D model of human body. Such an improvement could be used in apparel industry. The main goal of the study is to understand the level of acceptance of augmented reality as a technology on the Russian apparel market. For a more accurate investigation, a new model accounting for augmented reality characteristics, as well as for similarities and differences between online and offline customer behavior in apparel industry, was developed. As a result of the survey, the weights of different purchase intention factors for Russian consumer were found, and the information about Russian consumers’ preferences towards the augmented reality features in apparel market, especially in fitting time, real-time interaction and fitting quality peculiarities, was presented.

m-Equine : IS support for the horse industry

The horse industry is in many ways still operating the same way as it did in the beginning of the 20th century. At the same time the role of the horse has changed dramatically, from a beast of burden to a top athlete, a production animal or a beloved pet. A racehorse or an equestrian sport horse is trained and taken care of like any other athlete, but unlike its human counterpart, it might end up on our plate. According to European and many other countries’ laws, a horse is a production animal. The medical data of a horse should be known if it is to be slaughtered, to ensure that the meat is safe for human consumption. Today this vital medical information should be noted in the horse’s passport, but this paperbased system is not reliable. If a horse gets sold, depending on the country’s laws, the medical records might not be transferred to the new owner, the horse’s passport might get lost etc. Thus the system is not fool proof. It is not only the horse owners who have to struggle with paperwork; veterinarians as well as other officials often use much time on redundant paperwork. The main research question of this thesis is if IS could be used to help the different stakeholders within the horse industry? Veterinarians in particular who travel to stables to treat horses cannot always take with them their computers, since the somewhat unsanitary environment is not suitable for a sensitive technological device. Currently there is no common medical database developed for horses, although such a database with a support system could help with many problems. These include vaccination and disease control, food-safety, as well as export and import problems. The main stakeholders within the horse industry, including equine veterinarians and horse owners, were studied to find out their daily routines and needs for a possible support system. The research showed that there are different aspects within the horse industry where IS could be used to support the stakeholders daily routines. Thus a support system including web and mobile accessibility for the main stakeholders is under development. Since veterinarians will be the main users of this support system, it is very important to make sure that they find it useful and beneficial in their daily work. To ensure a desired result, the research and development of the system has been done iteratively with the stakeholders following the Action Design Research methodology.

Phenomena and mechanisms in purification of animal fat

Työn tarkoitus oli tutkia eläinrasvan puhdistusta biodieselin valmistusta varten. Eläinrasvaa syntyy elintarviketeollisuuden sivutuotteena ja sitä saadaan myös myymättä jääneistä elintarvikkeista. Rasva sisältää epäpuhtauksia, jotka on poistettava ennen biodieselprosessia. Tässä työssä tutkittavat epäpuhtaudet ovat typpi, fosfori, rauta, natrium, kalsium ja magnesium. Puhdistusmenetelminä käytettiin saostamista sitruunahapolla sekä adsorbointia kahdella eri adsorbentilla. Tavoitteena oli selvittää riittävä määrä happoa ja adsorbenttia sekä tutkia puhdistuksen mekanismia. Lisäksi tarkasteltiin lämpötilan vaikutusta adsorption aikana.

Production unit’s overhead cost allocation with activity-based costing in food industry enterprise

The main objective of this Master’s thesis is to develop a cost allocation model for a leading food industry company in Finland. The goal is to develop an allocation method for fixed overhead expenses produced in a specific production unit and create a plausible tracking system for product costs. The second objective is to construct an allocation model and modify the created model to be suited for other units as well. Costs, activities, drivers and appropriate allocation methods are studied. This thesis is started with literature review of existing theory of ABC, inspecting cost information and then conducting interviews with officials to get a general view of the requirements for the model to be constructed. The familiarization of the company started with becoming acquainted with the existing cost accounting methods. The main proposals for a new allocation model were revealed through interviews, which were utilized in setting targets for developing the new allocation method. As a result of this thesis, an Excel-based model is created based on the theoretical and empiric data. The new system is able to handle overhead costs in more detail improving the cost awareness, transparency in cost allocations and enhancing products’ cost structure. The improved cost awareness is received by selecting the best possible cost drivers for this situation. Also the capacity changes are taken into consideration, such as usage of practical or normal capacity instead of theoretical is suggested to apply. Also some recommendations for further development are made about capacity handling and cost collection.