953 resultados para transferrin utilization
Sucrose utilization by Zymomonas mobilis: Levan production optimization using submerged fermentation
Resumo:
Levan is an extracellular polysaccharide (EPS), constituted by linked fructose units β (2,6), obtained by transfructosilation reaction during fermentation of microorganisms in a sucrose rich culture medium. The bacterial levan production is a good alternative of fructose source, besides having certain functional characteristics in the human body, such as a hypocholesterolemic and an anticarcinogenic agent. In the food industry, the levan can be used to fix colors and flavors, as well as to thickening and stabilizing agent in foods. This work aimed to analyze the kinetic parameters for levan production by Zymomonas mobilis CCT 4494, using submerged fermentation. The response surface methodology (RSM), was utilized to predict the optimization of medium for exopolymer production and the independent variables studied were: initial pH, incubation temperature, sucrose, KCl, K2SO4, MgSO4 and CaCl2. It was observed that the bacterium Z. mobilis CCT 4494 well adapted in medium containing high concentrations of sucrose.
Resumo:
Networked control systems (NCSs) are distributed control systems in which the sensors, actuators, and controllers are physically separated and connected through an industrial network. The main challenge related to the development of NCSs is the degenerative effects caused by the inclusion of this communication network in the closed loop control. In order to mitigate these effects, co-simulation tools for NCS have been developed to study the network influence in the NCS. This paper presents a revision about co-simulation tools for NCS and the application of two of these tools for the design and evaluation of NCSs. The TrueTime and Jitterbug tools were used together to evaluate the main configuration parameter that affects the performance of CAN-based NCS and to verify the NCS quality of control under various timing conditions including different transmission period of messages and network delays. Therefore, the simulation results led to the conclusion that despite the transmission period of messages is the most significant factor among the analyzed in the design of NCS, its influence is related to the kind of system with greater effects in NCSs with fast dynamics.
Resumo:
Few studies exist on the types of characteristics associated with service utilization (e.g., shelters, food programs) among homeless youth in the U.S. Services are important, however, because without food and shelter, numerous homeless youth resort to trading sex in order to meet their daily survival needs. Access to physical and mental health services gives homeless youth more of an opportunity to integrate into mainstream society than they would otherwise have. To address this gap in our understanding, my study examines what traits (e.g. age, race, abuse history) correlate with the use of shelters, food programs, street outreach, counseling, STD/STI testing, and HIV testing among homeless youth. The Theory of Reasoned Action is used as an ideological framework in conjunction with theoretical constructs of risk, need, and prior service exposure. Data were obtained from the Social Network and Homeless Youth Project (SNHYP), a sample of 249 Midwestern homeless youth ages 14 to 21, which used trained interviewers to conduct structured interviews with youth. Respondents were interviewed in both shelters and on the street over a period of approximately one year. My findings revealed that homeless youth’s service usage varied across gender, sexual orientation, age, having recently held a job, and having ever been physically or sexually abused, in addition to other characteristics. Conversely, service use was not associated with social network size or subjective norms (i.e. attitudes of peers, such as acceptance of condom use) of youths’ social networks. By examining these areas, my study builds on previous research on homeless youth and lays the framework for future research on service utilization by homeless youth.
Resumo:
Crop depredation by red-winged blackbirds (Agelaius phoeniceus) causes serious economic losses to agricultural crops each year in both Canada and the United States. The concentration of vulnerable, monocultural crops, particularly corn, during periods when large flocks of blackbirds congregate in roosting areas prior to migration has invariably led to heavy feeding pressure (Stone et al., 1972; Wiens and Dyer, 1975; Tyler et al., 1978). Efforts to reduce damage levels by mechanical and chemical dispersal agents have been largely unsuccessful, at least in terms of a long-term solution to the problem. Recently, the lethal control of blackbird populations using surfactants has been proposed. However, the potential repercussions of the removal of substantial numbers of birds from northern breeding areas are virtually unknown (Robertson et al., 1978). Much of the research dealing with the feeding ecology of red-winged blackbirds has been limited to fall and winter periods when large aggregations of birds are actively involved in crop depredation (Goddad, 1969; Williams, 1976; Dolbeer et al., 1978) or pose a potential health hazard (Monroe and Cronholm, 1976). However, what is not known is the degree to which the removal of deleterious weed seed and insect pests cited in several studies (Bird and Smith, 1964; Mott et al., 1972; Robertson et al., 1978) might be of potential value to agriculture. The issue of whether the benefits derived from redwing foraging compensate for the negative aspects associated with crop depredation and health hazards remains largely unresolved. The present study attempted to evaluate the pest status of this species using diet information derived from food habits analysis conducted during the residency of red- winged blackbirds in a northern breeding area. By determining how the feeding ecology of red-winged blackbirds varies on a seasonal basis, among different breeding habitats and between sexes, we hoped to determine more realistically which segments of the population might be responsible for the greatest benefits or detriments and, thereby, more accurately evaluate the economic impact of the species as a whole. To achieve this aim, the study provides an accurate description of the common insects and weed pests utilized by redwings. By determining the relative proportions of those items known to be detrimental, we hoped to illustrate, at least qualitatively, the degree to which redwing foraging is comprised of both beneficial and harmful components.
Resumo:
The screening. biomass growth of lipase-producing fungus isolated from different sources and available at URM (University Recife Mycologia). as well as, the immobilization and utilization of the whole cells for the transesterification of babassu oil were investigated. Rhizopus oryzae (URM 3231, 4692), Mucor circinelloides (URM 4140, 4182) and Penicillium citrinum URM 4216 were considered to be good intracellular lipase producers whereas those from Mucor hiemalis URM 4144 and Mucor piriformis URM 4145 were weaker. Fungi biomass containing high lipase activities was immobilized on different biomass support particles (BSPs) and with the exception of Penicillium citrinum URM 4216 all the other fungi strains exhibited high lipase activity (20-50 Ug(-1)) when immobilized in situ using polyurethane foam particles. Transesterification activities of the immobilized whole cells were evaluated in the ethanolysis reaction with babassu oil and the highest performance was attained by M. circinelloides URM 4182 giving 83.22 +/- 3.68% ester yield in less than 96 h reaction. The biocatalyst operational stability was also assessed and an inactivation profile was found to follow the Arrhenius model, revealing values of 26 days and 2.6 x 10(-2)day(-1), for half-life and a deactivation coefficient, respectively. The purified product (biodiesel) exhibited viscosity (6.63 cSt) close to the value to attend specifications by the ASTM 06751 to be used as biofuel. Results are favorable compared with data already reported in the literature and demonstrated that M. circinelloides URM 4182 whole cells is a cheaper biocatalyst that can be used in the biodiesel synthesis. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
The objective of this work was to evaluate the utilization by corn plants of P from triple superphosphate fertilizer labeled with P-32 (P-32-TSP), and of P from soil as affected by N rates and by the green manures (GM) sunn hemp (Crotalaria juncea) and millet (Pennisetum glaucum). The experiment was carried out using pots filled with 5 kg Oxisol (Rhodic Hapludox). A completely randomized design was used, in a 4x4x2 factorial arrangement, with four replicates. The treatments were: four P rates as TSP (0, 0.175, 0.350, and 0.700 g P per pot); four N rates as urea (0, 0.75, 1.50, and 2.25 g N per pot); and sunn hemp or millet as green manure. The additions of N and P by the GM were taken into account. After grain physiologic maturation, corn dry matter, P contents, accumulated P, and P recovery in the different treatments were measured. P-32-TSP recovery by corn increased with N increasing rates, and decreased with increasing rates of P-32-TSP. The mineral fertilizer provides most of the accumulated P by corn plants. The recovery of P-32-TSP by corn was 13.12% in average. The green manure species influence the assimilation of P-32-TSP by the plants.
Resumo:
This paper sets forth a Neo-Kaleckian model of capacity utilization and growth with distribution featuring a profit-sharing arrangement. While a given proportion of firms compensate workers with only a base wage, the remaining proportion do so with a base wage and a share of profits. Consistent with the empirical evidence, workers hired by profit-sharing firms have a higher productivity than their counterparts in base-wage firms. While a higher profit-sharing coefficient raises capacity utilization and growth irrespective of the distribution of compensation strategies across firms, a higher frequency of profit-sharing firms does likewise only if the profit-sharing coefficient is sufficiently high.
Resumo:
BACKGROUND: The characteristics of blood recipients including diagnoses associated with transfusion and posttransfusion survival are unreported in Brazil. The goals of this analysis were: 1) to describe blood utilization according to clinical diagnoses and patient characteristics and 2) to determine the factors associated with survival of blood recipients. STUDY DESIGN AND METHODS: A retrospective cross-sectional analysis was conducted on all inpatients in 2004. Data came from three sources: The first two files consist of data about patient characteristics, clinical diagnosis, and transfusion. Analyses comparing transfused and nontransfused patients were conducted. The third file was used to determine survival recipients up to 3 years after transfusion. Logistic regression was conducted among transfused patients to examine characteristics associated with survival. RESULTS: In 2004, a total of 30,779 patients were admitted, with 3835 (12.4%) transfused. These patients had 10,479 transfusions episodes, consisting of 39,561 transfused components: 16,748 (42%) red blood cells, 15,828 (40%) platelets (PLTs), and 6190 (16%) plasma. The median number of components transfused was three (range, 1-656) per patient admission. Mortality during hospitalization was different for patients whose admissions included transfusion or not (24% vs. 4%). After 1 year, 56% of transfusion recipients were alive. The multivariable model of factors associated with mortality after transfusion showed that the most significant factors in descending order were hospital ward, increasing age, increasing number of components transfused, and type of components received. CONCLUSION: Ward and transfusion are markers of underlying medical conditions and are associated with the probability of survival. PLT transfusions are common and likely reflect the types of patients treated. This comprehensive blood utilization study, the first of its kind in Brazil, can help in developing transfusion policy analyses in South America.
Resumo:
Objective: Major Depressive Disorder (MDD) is a debilitating condition with a marked social impact. The impact of MDD and Treatment-Resistant Depression (TRD+) within the Brazilian health system is largely unknown. The goal of this study was to compare resource utilization and costs of care for treatment-resistant MDD relative to non-treatment-resistant depression (TRD-). Methods: We retrospectively analyzed the records of 212 patients who had been diagnosed with MDD according to the ICD-10 criteria. Specific criteria were used to identify patients with TRD+. Resource utilization was estimated, and the consumption of medication was annualized. We obtained information on medical visits, procedures, hospitalizations, emergency department visits and medication use related or not to MDD. Results: The sample consisted of 90 TRD+ and 122 TRD-patients. TRD+ patients used significantly more resources from the psychiatric service, but not from non-psychiatric clinics, compared to TRD-patients. Furthermore, TRD+ patients were significantly more likely to require hospitalizations. Overall, TRD+ patients imposed significantly higher (81.5%) annual costs compared to TRD-patients (R$ 5,520.85; US$ 3,075.34 vs. R$ 3,042.14; US$ 1,694.60). These findings demonstrate the burden of MDD, and especially of TRD+ patients, to the tertiary public health system. Our study should raise awareness of the impact of TRD+ and should be considered by policy makers when implementing public mental health initiatives.
Resumo:
Ten yeast strains were evaluated concerning their capabilities to assimilate biodiesel-derived glycerol in batch cultivation. The influence of glycerol concentration, temperature, pH and yeast extract concentration on biomass production was studied for the yeast selected. Further, the effect of agitation on glycerol utilization by the yeast Hansenula anomala was also studied. The yeast H. anomala CCT 2648 showed the highest biomass yield (0.30 g g(-1)) and productivity (0.19 g L-1 h(-1)). Citric acid, succinic acid, acetic acid and ethanol were found as the main metabolites produced. The increase of yeast extract concentration from 1 to 3 g L-1 resulted in high biomass production. The highest biomass concentration (21 g L-1), yield (0.45 g g(-1)) and productivity (0.31 g L-1 h(-1)), as well as ribonucleotide production (13.13 mg g(-1)), were observed at 700 rpm and 0.5 vvm. These results demonstrated that glycerol from biodiesel production process showed to be a feasible substrate for producing biomass and ribonucleotides by yeast species.
Resumo:
Abstract Background Overflow metabolism is an undesirable characteristic of aerobic cultures of Saccharomyces cerevisiae during biomass-directed processes. It results from elevated sugar consumption rates that cause a high substrate conversion to ethanol and other bi-products, severely affecting cell physiology, bioprocess performance, and biomass yields. Fed-batch culture, where sucrose consumption rates are controlled by the external addition of sugar aiming at its low concentrations in the fermentor, is the classical bioprocessing alternative to prevent sugar fermentation by yeasts. However, fed-batch fermentations present drawbacks that could be overcome by simpler batch cultures at relatively high (e.g. 20 g/L) initial sugar concentrations. In this study, a S. cerevisiae strain lacking invertase activity was engineered to transport sucrose into the cells through a low-affinity and low-capacity sucrose-H+ symport activity, and the growth kinetics and biomass yields on sucrose analyzed using simple batch cultures. Results We have deleted from the genome of a S. cerevisiae strain lacking invertase the high-affinity sucrose-H+ symporter encoded by the AGT1 gene. This strain could still grow efficiently on sucrose due to a low-affinity and low-capacity sucrose-H+ symport activity mediated by the MALx1 maltose permeases, and its further intracellular hydrolysis by cytoplasmic maltases. Although sucrose consumption by this engineered yeast strain was slower than with the parental yeast strain, the cells grew efficiently on sucrose due to an increased respiration of the carbon source. Consequently, this engineered yeast strain produced less ethanol and 1.5 to 2 times more biomass when cultivated in simple batch mode using 20 g/L sucrose as the carbon source. Conclusion Higher cell densities during batch cultures on 20 g/L sucrose were achieved by using a S. cerevisiae strain engineered in the sucrose uptake system. Such result was accomplished by effectively reducing sucrose uptake by the yeast cells, avoiding overflow metabolism, with the concomitant reduction in ethanol production. The use of this modified yeast strain in simpler batch culture mode can be a viable option to more complicated traditional sucrose-limited fed-batch cultures for biomass-directed processes of S. cerevisiae.
Resumo:
Background: The methods used for evaluating wound dimensions, especially the chronic ones, are invasive and inaccurate. The fringe projection technique with phase shift is a non-invasive, accurate and low-cost optical method. Objective: The aim is to validate the technique through the determination of dimensions of objects of known topography and with different geometries and colors to simulate the wounds and tones of skin color. Taking into account the influence of skin wound optical factors, the technique will be used to evaluate actual patients’ wound dimensions and to study its limitations in this application. Methods: Four sinusoidal fringe patterns, displaced ¼ of period each, were projected onto the objects surface. The object dimensions were obtained from the unwrapped phase map through the observation of the fringe deformations caused by the object topography and using phase shift analysis. An object with simple geometry was used for dimensional calibration and the topographic dimensions of the others were determined from it. After observing the compatibility with the data and validating the method, it was used for measuring the dimensions of real patients’ wounds. Results and Conclusions: The discrepancies between actual topography and dimensions determined with Fringe Projection Technique and for the known object were lower than 0.50 cm. The method was successful in obtaining the topography of real patient’s wounds. Objects and wounds with sharp topographies or causing shadow or reflection are difficult to be evaluated with this technique.