Designing marine fishery reserves using passive acoustic telemetry

Marine Fishery Reserves (MFRs) are being adopted, in part, as a strategy to replenish depleted fish stocks and serve as a source for recruits to adjacent fisheries. By necessity, their design must consider the biological parameters of the species under consideration to ensure that the spawning stock is conserved while simultaneously providing propagules for dispersal. We describe how acoustic telemetry can be employed to design effective MFRs by elucidating important life-history parameters of the species under consideration, including home range, and ecological preferences, including habitat utilization. We then designed a reserve based on these parameters using data from two acoustic telemetry studies that examined two closely-linked subpopulations of queen conch (Strombus gigas) at Conch Reef in the Florida Keys. The union of the home ranges of the individual conch (aggregation home range: AgHR) within each subpopulation was used to construct a shape delineating the area within which a conch would be located with a high probability. Together with habitat utilization information acquired during both the spawning and non-spawning seasons, as well as landscape features (i.e., corridors), we designed a 66.5 ha MFR to conserve the conch population. Consideration was also given for further expansion of the population into suitable habitats.

Acoustic signatures of the seafloor: Tools for predicting grouper habitat

Groupers are important components of commercial and recreational fisheries. Current methods of diver-based grouper census surveys could potentially benefit from development of remotely sensed methods of seabed classification. The goal of the present study was to determine if areas of high grouper abundance have characteristic acoustic signatures. A commercial acoustic seabed mapping system, QTC View Series V, was used to survey an area near Carysfort Reef, Florida Keys. Acoustic data were clustered using QTC IMPACT software, resulting in three main acoustic classes covering 94% of the area surveyed. Diver-based data indicate that one of the acoustic classes corresponded to hard substrate and the other two represented sediment. A new measurement of seabed heterogeneity, designated acoustic variability, was also computed from the acoustic survey data in order to more fully characterize the acoustic response (i.e., the signature) of the seafloor. When compared with diver-based grouper census data, both acoustic classification and acoustic variability were significantly different at sites with and without groupers. Sites with groupers were characterized by hard bottom substrate and high acoustic variability. Thus, the acoustic signature of a site, as measured by acoustic classification or acoustic variability, is a potentially useful tool for stratifying diver sampling effort for grouper census.

Jisc Briefing Document on Data Citations

Commissioned paper from Cameron Neylon (Curtin University) on citation practices for research data. Includes information on current (2016) global activity in the field, parallels with traditional citation, and recommendations.

Technologies for Measuring Currents in Coastal Environments, Portland, Maine, October 26-28, 2005:workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop entitled "Technologies for Measuring Currents in Coastal Environments" was held in Portland, Maine, October 26-28, 2005, with sponsorship by the Gulf of Maine Ocean Observing System (GoMOOS), an ACT partner organization. The primary goals of the event were to summarize recent trends in nearshore research and management applications for current meter technologies, identify how current meters can assist coastal managers to fulfill their regulatory and management objectives, and to recommend actions to overcome barriers to use of the technologies. The workshop was attended by 25 participants representing state and federal environmental management agencies, manufacturers of current meter technologies, and researchers from academic institutions and private industry. Common themes that were discussed during the workshop included 1) advantages and limitations of existing current measuring equipment, 2) reliability and ease of use with each instrument type, 3) data decoding and interpretation procedures, and 4) mechanisms to facilitate better training and guidance to a broad user group. Seven key recommendations, which were ranked in order of importance during the last day of the workshop are listed below. 1. Forums should be developed to facilitate the exchange of information among users and industry: a) On-line forums that not only provide information on specific instruments and technologies, but also provide an avenue for the exchange of user experiences with various instruments (i.e. problems encountered, cautions, tips, advantages, etc). (see References for manufacturer websites with links to application and technical forums at end of report) b) Regional training/meetings for operational managers to exchange ideas on methods for measuring currents and evaluating data. c) Organize mini-meetings or tutorial sessions within larger conference venues. 2. A committee of major stakeholders should be convened to develop common standards (similar to the Institute of Electrical and Electronics Engineers (IEEE) committee) that enable users to switch sensors without losing software or display capabilities. (pdf contains 28 pages)

Applications of in situ Fluorometers in Nearshore waters, Cape Elizabeth, Maine, February 2-4,2005: workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop "Applications of in situ Fluorometers in Nearshore Waters" was held in Cape Elizabeth, Maine, February 2-4,2005, with sponsorship by the Gulf of Maine Ocean Observing System (GoMOOS), one of the ACT partner organization. The purpose of the workshop was to explore recent trends in fluorometry as it relates to resource management applications in nearshore environments. Participants included representatives from state and federal environmental management agencies as well as research institutions, many of whom are currently using this technology in their research and management applications. Manufacturers and developers of fluorometric measuring systems also attended the meeting. The Workshop attendees discussed the historical and present uses of fluorometry technology and identified the great potential for its use by coastal managers to fulfill their regulatory and management objectives. Participants also identified some of the challenges associated with the correct use of Fluorometers to estimate biomass and the rate of primary productivity. The Workshop concluded that in order to expand the existing use of fluorometers in both academic and resource management disciplines, several issues concerning data collection, instrument calibration, and data interpretation needed to be addressed. Participants identified twelve recommendations, the top five of which are listed below: Recommendations 1) Develop a "Guide" that describes the most important aspects of fluorescence measurements. This guide should be written by an expert party, with both research and industry input, and should be distributed by all manufacturers with their instrumentation. The guide should also be made available on the ACT website as well as those of other relevant organizations. The guide should include discussions on the following topics: The benefits of using fluorometers in research and resource management applications; What fluorometers can and cannot provide in terms of measurements; The necessary assumptions required before applying fluorometry; Characterization and calibration of fluorometers; (pdf contains 32 pages)

Gestión de datos de investigación en repositorios de acceso abierto: una visión panorámica y un caso práctico en la UPV/EHU

[ES] Los siguientes enlaces proporcionan información adicional sobre este texto:

O Movimento de economia solidária no Brasil e os dilemas da organização popular

A partir dos anos 1990, tornou-se cada vez mais notória a formação de iniciativas de economia solidária que surgem com a perspectiva primeira de superar as condições de pobreza. Os Empreendimentos Econômicos Solidários (EES) configuram formas coletivas de organização do trabalho em que a relação entre capital e trabalho não está posta da forma tradicional e em que a dinâmica de gestão apresenta importante significado político e cultural, dando condições para superar a privação de capacidade políticas e materiais. O desenvolvimento da economia solidária no Brasil foi convergindo para a consolidação do Movimento da Economia Solidária, que possui, como principal expressão, o Fórum Brasileiro de Economia Solidária. A pesquisa que orienta esta tese estuda as dinâmicas que caracterizam a formação e consolidação do Fórum Brasileiro de Economia Solidária e visa, a partir deste sujeito de pesquisa, à percepção de como os atores políticos deste movimento estão configurando a organização popular em prol da transformação social. Para a realização da pesquisa, desenvolveu-se um estudo que envolveu, entre outros, trabalho de campo através de um corpus de pesquisa voltado ao acompanhamento de três plenárias estaduais (RJ, PB e RS) que compuseram o processo preparatório da IV Plenária Nacional de Economia Solidária. Além disso, realizou-se uma caracterização geral da situação da economia solidária nos três estados estudados no campo, tendo como fonte o Sistema de Informação de Economia Solidária da Secretaria Nacional de Economia Solidária. Este trabalho parte da compreensão de que a questão social é a categoria que melhor explica a totalidade do contexto em que se formam EES e, consequentemente, o movimento da economia solidária no Brasil. Assim, a reflexão teórica da presente tese é pautada na perspectiva de discutir a organização popular no movimento de economia solidária como contraponto significativo na questão social.

Caracterização e manejo de resíduos gerados nos laboratórios do Instituto de Biologia da Universidade do Estado do Rio de Janeiro, IBRAG, UERJ.

O crescimento da população mundial, aumento da industrialização e consumo de bens e serviços, tem aumentado significativamente a geração de resíduos que vem causando impactos negativos na saúde humana e ambiental. Neste contexto, se destaca a geração de produtos perigosos, tais como, os resíduos de serviços de saúde- RSS. Por apresentarem riscos à saúde da população e do meio ambiente, recomendações, normas e legislações surgiram para orientar a melhor maneira o manejo e disposição final destes resíduos. No Brasil, as resoluções NBR 306/04 e CONAMA 358/05 dão diretrizes para a elaboração de um Plano de Gerenciamento de Resíduos de Serviços de Saúde-PGRSS. Os laboratórios de pesquisa e ensino, como geradores de RSS, precisam se adequar à legislação, porém existem poucos estudos e a legislação não aborda especificamente os resíduos destes laboratórios. Os laboratórios e unidades da UERJ, geradores de RSS, não possuem PGRSS. Na UERJ, somente dois estudos levantaram os resíduos gerados em laboratórios, entretanto os dados levantados para o Instituto de Biologia são incompletos. Este estudo buscou avaliar o manejo dos resíduos biológico, químico, radioativo e perfurocortante nos laboratórios do Instituto de Biologia. Os dados foram coletados pelas informações dadas pelos professores, funcionários ou alunos dos laboratórios e por observação direta. Os dados de manejo foram analisados de acordo com a RDC 306/04 Anvisa, da Resolução CONAMA 358/05 e das fichas de segurança dos produtos químicos. Foram estudados 83% dos laboratórios do Instituto de Biologia. Destes, 43% geram resíduos químicos. Dos laboratórios caracterizados, 19 laboratórios geram somente resíduo químico. No pavilhão Américo Piquet estão localizados 63% dos laboratórios geradores de resíduos biológicos, químicos, perfurocortantes ou radioativos. Do total de resíduos gerados nos laboratórios, cerca de 80% foi de resíduo biológico, 15% de resíduo químico e 5% de resíduo perfurocortante. O manejo dos resíduos nos laboratórios é realizado de maneira confusa, geralmente os erros estão na segregação, identificação e acondicionamento. De maneira geral, as informações sobre o manejo utilizado para os resíduos são incompletas, desconhecidas ou imprecisas. As ações incorretas do manejo de resíduos são características para cada tipo de resíduo; no resíduo biológico, freqüentemente, encontraram-se resíduos comuns. O resíduo químico é geralmente descartado sem tratamento prévio na rede de esgoto. O resíduo radioativo não possui identificação e acompanhamento do decaimento, para posterior descarte. No resíduo perfurocortante encontrou-se, freqüentemente, resíduo biológico e químico misturados. Para o sucesso de um futuro Plano de Gerenciamento de Resíduos, a capacitação dos profissionais é muito importante. A Instituição deve investir na consolidação desse trabalho, considerando que ela não pode se furtar de adotar uma postura pró-ativa com relação aos problemas ambientais, sejam eles dirigentes da instituição, ou profissionais que ali atuam. Espera-se que essa pesquisa possa auxiliar neste sentido.

A marine biogeographic assessment of the northwestern Hawaiian Islands

The mission of NOAA’s Office of National Marine Sanctuaries (ONMS) is to serve as the trustee for a system of marine protected areas, to conserve, protect and enhance biodiversity. To assist in accomplishing this mission, the ONMS has developed a partnership with NOAA’s Center for Coastal Monitoring and Assessment’s Biogeography Branch (CCMA-BB) to conduct biogeographic assessments of marine resources within and adjacent to the marine waters of NOAA’s National Marine Sanctuaries (Kendall and Monaco, 2003). Biogeography is the study of spatial and temporal distributions of organisms, their associated habitats, and the historical and biological factors that influence species’ distributions. Biogeography provides a framework to integrate species distributions and life history data with information on the habitats of a region to characterize and assess living marine resources within a sanctuary. The biogeographic data are integrated in a Geographical Information System (GIS) to enable visualization of species’ spatial and temporal patterns, and to predict changes in abundance that may result from a variety of natural and anthropogenic perturbations or management strategies (Monaco et al., 2005; Battista and Monaco, 2004). Defining biogeographic patterns of living marine resources found throughout the Northwestern Hawaiian Islands (NWHI) was identified as a priority activity at a May 2003 workshop designed to outline scientifi c and management information needs for the NWHI (Alexander et al., 2004). NOAA’s Biogeography Branch and the Papahanaumokuakea Marine National Monument (PMNM) under the direction of the ONMS designed and implemented this biogeographic assessment to directly support the research and management needs of the PMNM by providing a suite of spatially-articulated products in map and tabular formats. The major fi ndings of the biogeographic assessment are organized by chapter and listed below.

Data structures and software tools for the computer aided design of control systems: a survey.

CAD software can be structured as a set of modular 'software tools' only if there is some agreement on the data structures which are to be passed between tools. Beyond this basic requirement, it is desirable to give the agreed structures the status of 'data types' in the language used for interactive design. The ultimate refinement is to have a data management capability which 'understands' how to manipulate such data types. In this paper the requirements of CACSD are formulated from the point of view of Database Management Systems. Progress towards meeting these requirements in both the DBMS and the CACSD community is reviewed. The conclusion reached is that there has been considerable movement towards the realisation of software tools for CACSD, but that this owes more to modern ideas about programming languages, than to DBMS developments. The DBMS field has identified some useful concepts, but further significant progress is expected to come from the exploitation of concepts such as object-oriented programming, logic programming, or functional programming.

Proceedings of an international workshop on the value of computer-based engineering tools, held in Cambridge in April 1997

There is increasing adoption of computer-based tools to support the product development process. Tolls include computer-aided design, computer-aided manufacture, systems engineering and product data management systems. The fact that companies choose to invest in tools might be regarded as evidence that tools, in aggregate, are perceived to possess business value through their application to engineering activities. Yet the ways in which value accrues from tool technology are poorly understood.

This report records the proceedings of an international workshop during which some novel approaches to improving our understanding of this problem of tool valuation were presented and debated. The value of methods and processes were also discussed. The workshop brought together British, Dutch, German and Italian researchers. The presenters included speakers from industry and academia (the University of Cambridge, the University of Magdeburg and the Politechnico de Torino)

The work presented showed great variety. Research methods include case studies, questionnaires, statistical analysis, semi-structured interviews, deduction, inductive reasoning, the recording of anecdotes and analogies. The presentations drew on financial investment theory, the industrial experience of workshop participants, discussions with students developing tools, modern economic theories and speculation on the effects of company capabilities.

Developing a technology intelligence strategy at kodak european research: Scan & target

OVERVIEW: Kodak European Research (KER) developed a strategy for technology intelligence based on a theoretical model developed by Kerr et al. (2006). KER scouts designed and implemented a four-step approach to identify relevant technologies and research centers across Europe, Africa and the Middle East. The approach provides clear guidance for integrating web searches, scouting trips, networking and interactions with intermediaries. KER's example illustrates how companies can organize themselves to look outside corporate boundaries in search of technologies relevant for their business. The approach may be useful to those in other companies who have been asked to start a technology intelligence activity. © 2010 Industrial Research Institute, Inc.

Multi-Modal Image Retrieval from Construction Databases and Model-Based Systems

In the modern and dynamic construction environment it is important to access information in a fast and efficient manner in order to improve the decision making processes for construction managers. This capability is, in most cases, straightforward with today’s technologies for data types with an inherent structure that resides primarily on established database structures like estimating and scheduling software. However, previous research has demonstrated that a significant percentage of construction data is stored in semi-structured or unstructured data formats (text, images, etc.) and that manually locating and identifying such data is a very hard and time-consuming task. This paper focuses on construction site image data and presents a novel image retrieval model that interfaces with established construction data management structures. This model is designed to retrieve images from related objects in project models or construction databases using location, date, and material information (extracted from the image content with pattern recognition techniques).