Antigen-specific suppression of a primed immune response by dendritic cells mediated by regulatory T cells secreting interleukin-10

Antigen-specific suppression of a previously primed immune response is a major challenge for immunotherapy of autoimmune disease. ReIB activation is required for myeloid DC differentiation. Here, we show that antigen-exposed DCs in which ReIB function is inhibited lack cell surface CD40, prevent priming of immunity, and suppress previously primed immune responses. DCs generated from CD40-deficient mice similarly confer suppression. Regulatory CD4(+) T cells induced by the DCs transfer antigen-specific Infectious tolerance to primed recipients in an interleukin10-dependent fashion. Thus CD40, regulated by ReIB activity, determines the consequences of antigen presentation by myeloid DCs. These observations have significance for autoimmune immunotherapy and suggest a mechanism by which peripheral tolerance might be constitutively maintained by RelB(-) CD40(-) DCs.

Genotype and environment effects on dynamics of harvest index during grain filling in sorghum

An approach based on a linear rate of increase in harvest index (141) with time after anthesis has been used as a simple means-to predict grain growth and yield in many crop simulation models. When applied to diverse situations, however, this approach has been found to introduce significant error in grain yield predictions. Accordingly, this study was undertaken to examine the stability of the HI approach for yield prediction in sorghum [Sorghum bicolor (L.) Moench]. Four field experiments were conducted under nonlimiting water. and N conditions. The experiments were sown at times that ensured a broad range in temperature and radiation conditions. Treatments consisted of two population densities and three genotypes varying in maturity. Frequent sequential harvests were used to monitor crop growth, yield, and the dynamics of 111. Experiments varied greatly in yield and final HI. There was also a tendency for lower HI with later maturity. Harvest index dynamics also varied among experiments and, to a lesser extent, among treatments within experiments. The variation was associated mostly with the linear rate of increase in HI and timing of cessation of that increase. The average rate of HI increase was 0.0198 d(-1), but this was reduced considerably (0.0147) in one experiment that matured in cool conditions. The variations found in IN dynamics could be largely explained by differences in assimilation during grain filling and remobilization of preanthesis assimilate. We concluded that this level of variation in HI dynamics limited the general applicability of the HI approach in yield prediction and suggested a potential alternative for testing.

Evaluating plant breeding strategies by simulating gene action and dryland environment effects

Functional genomics is the systematic study of genome-wide effects of gene expression on organism growth and development with the ultimate aim of understanding how networks of genes influence traits. Here, we use a dynamic biophysical cropping systems model (APSIM-Sorg) to generate a state space of genotype performance based on 15 genes controlling four adaptive traits and then search this spice using a quantitative genetics model of a plant breeding program (QU-GENE) to simulate recurrent selection. Complex epistatic and gene X environment effects were generated for yield even though gene action at the trait level had been defined as simple additive effects. Given alternative breeding strategies that restricted either the cultivar maturity type or the drought environment type, the positive (+) alleles for 15 genes associated with the four adaptive traits were accumulated at different rates over cycles of selection. While early maturing genotypes were favored in the Severe-Terminal drought environment type, late genotypes were favored in the Mild-Terminal and Midseason drought environment types. In the Severe-Terminal environment, there was an interaction of the stay-green (SG) trait with other traits: Selection for + alleles of the SG genes was delayed until + alleles for genes associated with the transpiration efficiency and osmotic adjustment traits had been fixed. Given limitations in our current understanding of trait interaction and genetic control, the results are not conclusive. However, they demonstrate how the per se complexity of gene X gene X environment interactions will challenge the application of genomics and marker-assisted selection in crop improvement for dryland adaptation.

Insulamento burocr??tico, accountability e transpar??ncia: dez anos de regula????o da Ag??ncia Nacional de Vigil??ncia Sanit??ria

Este artigo estuda os instrumentos e mecanismos de transpar??ncia e accountability das ag??ncias reguladoras brasileiras. Por meio da caracteriza????o dos processos de controle, participa????o e acesso a informa????es da Ag??ncia Nacional de Vigil??ncia Sanit??ria (Anvisa), analisa-se como as ag??ncias t??m utilizado tais instrumentos e mecanismos para acolher e processar diversos interesses do processo regulat??rio, promover a estabilidade das regras do jogo e refor??ar a sua legitimidade no ambiente pol??tico e social em que elas est??o inseridas. Foram utilizados dados relativos aos diversos instrumentos de transpar??ncia e accountability, bem como ??s inst??ncias e mecanismos de participa????o da sociedade no processo regulat??rio da Anvisa. Conclui-se que a accountability das ag??ncias ?? um contrafluxo ?? tend??ncia de insulamento, ao mesmo tempo em que se pode configurar um esfor??o de reconhecimento pela sociedade da chegada de um novo aparato institucional no Estado brasileiro: as ag??ncias reguladoras.

Mudança institucional, reformas regulatórias e os desafios da regulação por parte da Agência Nacional de Energia Elétrica–ANEEEL

As mudanças institucionais e regulatórias inseridas principalmente no setor de infraestrutura, em particular no setor de energia, passaram a ser um novo ponto de governança para o Estado a partir de meados da década de 1990. Naquele formato inicial, ficou claro um planejamento inadequado, uma vez que as privatizações de empresas do setor de energia ocorreram antes da criação da Agência Nacional de Energia Elétrica (ANEEL). Esse ponto, segundo os principais autores foi decisivo e pontual para que, nos primeiros anos, o processo regulatório não ter atendido as necessidades dos agentes envolvidos (Estado, empresa e cidadão). Esta situação culminou com uma forte crise no setor, bem como no racionamento de energia ocorrido no início do Século XXI. Essa situação levou a um outro período de reforma, instalado em 2004. O ponto principal desse trabalho esta fundamentando em apresentar algumas questões ligadas aos desafios da ANEEL, sendo esta sedimentada nos processos de aprendizado e conhecimento, porém não esquecendo de abordar os pontos fundamentais e impeditivos para que a plena eficiência seja alcançada. Ao longo desse estudo, podemos analisar que os resultados alcançados pela ANEEL são em parte sólidos, porém fatores como: dificuldades em retenção de pessoas no corpo da agência, restrições orçamentárias, riscos constantes de captura, aliado ao processo de assimetria de informação, bem como a convivência com o misto de empresas públicas e privadas, são fatores que aumentam as incertezas no ambiente e no processo regulatório, contribuindo, ainda que indiretamente, para que os investimentos não sejam aplicados de acordo com o planejado, conseqüentemente, toda essa condição tem afetado os resultados e o equilíbrio do setor de energia.

Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene,adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.

Certification and integration of environment with quality and safety – a path to sustained success

According to Wright [1] certification of products and processes began during the 1960’s in the manufacturing industry, as a tool to control and assure the quality/conformity of products and services provided by suppliers to customers/consumers. Thus, the series of ISO 9000 was published first time, in 1987 and it was been created with a flexible character, to be reviewed periodically. Later, were published others normative references, which highlight the ISO 14001 in 1996 and OHSAS 18001 in 1999. This was also, the natural sequence of the certification processes in the organizations, i.e., began with the certification of quality management systems (QMS) followed by the environmental management systems (EMS) and after for the Occupational Health and Safety Management System (OHSMS). Hence, a high percentage of organizations with an EMS, in accordance with the ISO 14001, had also implemented, a certified QMS, in accordance with ISO 9001. At first the implementation of a QMS was particularly relevant in high demanding activity sectors, like the automotive and aeronautical industries, but it has rapidly extended to every activity sector, becoming a common requisite of any company worldwide and a factor of competitiveness and survival. Due to the increasingly demanding environmental legislation in developed countries, companies nowadays are required to seriously take into consideration not only environmental aspects associated to the production chain itself, but also to the life cycle of their products.

A generic model for integration of Quality, Environment and Safety Management Systems

Purpose – The purpose of this paper is to propose a generic model of Integrated Management System of Quality, Environment and Safety (IMS-QES) that can be adapted and progressively to assimilate various Management Systems, of which highlights: ISO 9001 for Quality; ISO 14001 for Environment; OHSAS 18001 for Occupational Health and Safety. Design/methodology/approach – The model was designed in the real environment of a Portuguese Organization and 160 employees were surveyed. The rate response was equal to 86 percent. The conceived model was implemented in a first phase for the integration of Quality, Environment and Safety Management Systems. Findings – Among the main findings of the survey the paper highlights: the elimination of conflicts between individual systems with resources optimization; creation of added value to the business by eliminating several types of wastes; the integrated management of sustainability components in a global market; the improvement of partnerships with suppliers of goods and services; reducing the number of internal and external audits. Originality/value – This case study is one of the first Portuguese empirical researches about IMS-QES and the paper believes that it can be useful in the creation of a Portuguese guideline for integration, namely the Quality Management Systems; Environmental Management Systems and Occupational Health and Safety Management Systems among others.

Selection of anthracnose resistant common beans using detached leaves in partially controlled environment

The objectives of this study were to evaluate the possibility of selecting anthracnose resistant common bean plants using detached primary leaves in partially controlled environment of a greenhouse and identify differences in the reaction of genotypes to anthracnose. The common bean cultivars Ouro Negro, OuroVermelho, ManteigãoFosco 11, Rudá, Rudá-R, VP8, BRSMG Madrepérola, Pérola, MeiaNoite and BRSMG Talismãwere characterizedfor resistance to the races 65, 81 and 453 of Colletotrichum lindemuthianum and the method of detached primary leaves was compared to the method with the traditional inoculation of plants at the phenological stage V2. The lines Rudá, Rudá-R and Pérola were inoculated with the races 65 and 453 of C. lindemuthianum, aiming to assess the rate of coincidence of anthracnose severity by both inoculation methods. In general, the two methods presented similar results for the reaction of the cultivars. The use of detached primary leaves of common bean plants in the partially controlled environment was feasible for selection of plants resistant to anthracnose and has the advantages of low-needed infrastructure and reduction of resources, space and time.

Developments regarding the integration of the occupational safety and health with quality and environment management systems

Nanotechnology is the manipulation of matter on na almost atomic scale to produce new structures, materials, and devices. As potential occupational exposure to nanomaterials (NMs) becomes more prevalente, it is importante that the principles of medical surveillance and risk management be considered for workers in the nanotechnology industry.However, much information about health risk is beyond our current knowledge. Thus, NMs presente new challenges to understanding, predicting, andmanageing potential health risks. First, we briefly describe some general features of NMs and list the most importante types of NMs. This review discusses the toxicological potential of NMs by comparing possible injury mechanism and know, or potentially adverse, health effects. We review the limited research to date for occupational exposure to these particles and how a worker might be exposed to NMs. The principles of medical surveillance are reviewed to further the discussion of occupational health surveillance are reviewed to further the discussion of occupational health surveillance for workers exposed to NMs. We outlinehow occupational health professionals could contribute to a better knowledge of health effects by the utilization of a health surveillance program and by minimizing exposure. Finally, we discuss the early steps towards regulation and the difficulties facing regulators in controlling potentially harmful exposures in the absence of suficiente scientific evidence.

Is the International Business Environment the actual context for international business research?

The International Business Environment (IBE) has been argued to be the essential context for international business (IB) studies and the distinguishing factor from other management studies and studies of large enterprises. Two content analysis show that many papers published in top tier IB journals either lack reference to any dimension of the IBE or tend to be uni-or bi-dimensional when addressing the IBE; it is not a surprise that the cultural dimension is the most often used. We suggest that: (a) there is need to developed more uni-and multi-dimensional environmental constructs; (b) a more holistic view of the IBE provides richer insights on the actual complexity underlying IB research. Future studies that provide more comprehensive models of the IBE that overcome the usual broad classifications of the international environment as undefined and uncontrollable factors are warranted to advance conceptual and empirical research.

VISUAL ART AND REGULATORY FIT MESSAGES ON CONSUMER EVALUATIONS

ABSTRACT In this study, we demonstrate that the art infusion effect, in which the presence of visual art causes a positive impact on consumers' perceptions of products and advertising messages, might have a moderation effect on regulatory fit and non-fit messages. We investigate the impact of visual art on advertisement evaluations in regulatory (non-) fit conditions. Regulatory focus theory suggests that consumers rely on their motivational focus (prevention vs. promotion) for their evaluations and decisions. Usually, consumers prefer products that fit with their personal motivational focus. In the present study, the results of three experiments indicate that using visual art with a promotion or prevention fit message is recommended, while non-art images increase message persuasiveness when non-fit messages are presented. Therefore, not all information compatible with the consumer's motivational focus are best evaluated. When non-art images are presented, non-fit messages might be more persuasive.

Public hearings as a tool to improve participation in regulatory policies: case study of the National Agency of Electric Energy

The participation of citizens in public policies is an opportunity not only to educate them, but also to increase their empowerment. However, the best way for deploying participatory policies, defining their scope and approach, still remains an open and continuous debate. Using as a case study the Brazilian National Agency of Electric Energy (Aneel), with its public hearings about tariff review, this paper aims at analyzing the democratic aspects of these hearings and challenges the hypothesis of many scholars about the social participation bias in this kind of procedure. This study points out a majority participation of experts, contrasting with the political content of discussions. And, this way, it contributes to a critical analysis of the public hearings as a participatory tool, indicating their strengths and their aspects which deserve a special attention.

Some aspects of implementing Regulatory Impact Analysis in Brazil

In an increasingly complex society, regulatory polices emerge as an important tool in public management. Nevertheless, regulation per se is no longer enough, and the agenda for a regulatory reform is increasing. Following this context, Brazil has implemented Regulatory Impact Analysis (RIA) in its regulatory agencies. Thus, Brazilian specificities have to be considered and, in this regard, a systematic approach provides a significant contribution. This article aims to address some critical reflections about which policy-makers should ask themselves before joining the implementation of a RIA system in the Brazilian context. Through a long-term perspective, the implementation of RIA must be seen as part of a permanent change in the administrative culture, understanding that RIA should be used as a further resource in the decision-making process, rather than a final solution.