Doctoral research training : encouraging timely completion – case study reflections of one university on how it supports a vibrant research training culture

This is a case study of a young university striving to generate and sustain a vibrant Research Training culture. The university’s research training framework is informed by a belief in a project management approach to achieving successful research candidature. This has led to the definition and reporting of key milestones during candidature. In turn, these milestones have generated a range of training programs to support Higher Degree Research (HDR) students to meet these milestones in a timely fashion. Each milestone focuses on a specific set of skills blended with supporting the development of different parts of the doctoral thesis. Data on student progress and completion has provided evidence in highlighting the role that the milestones and training are playing in supporting timely completion. A university-wide reporting cycle generated data on the range of workshops and training provided to Higher Degree Research students and supervisors. The report provided details of thesis topic and format, as well as participation in research training events and participant evaluation of those events. Analysis of the data led to recommendations and comments on the strengths and weaknesses of the current research training program. Discussion considered strategies and drivers for enhancements into the future. In particular, the paper reflects on the significant potential role of centrally curated knowledge systems to support HDR student and supervisor access, and engagement and success. The research training program was developed using blended learning as a model. It covered face-to-face workshops as well as online modules. These were supplemented by web portals that offered a range of services to inform and educate students and supervisors and included opportunities for students to interact with each other. Topics ranged from the research life cycle, writing and publication, ethics, managing research data, managing copyright, and project management to use of software and the University’s Code of Conduct for Research. The challenges discussed included: How to reach off campus students and those studying in external modes? How best to promote events to potential participants? How long and what format is best for face-to-face sessions? What online resources best supplement face-to-face offerings? Is there a place for peer-based learning and what form should this take? These questions are raised by a relatively young university seeking to build and sustain a vibrant research culture. The rapid growth in enrolments in recent years has challenged previous one-to-one models of support. This review of research training is timely in seeking strategies to address changing research training support capacity and student needs. Part of the discussion will focus on supervisory training, noting that good supervision is the one remaining place where one-to-one support is provided. Ensuring that supervisors are appropriately equipped to address student expectations is considered in the context of the research training provisions. The paper concludes with reflection on the challenges faced, and recommended ways forward as the number of research students grows into the future.

One-stop shopping : some notes on the concept and some Australian initiatives

This paper aims to review the notion of the one-stop shop, particularly as it has developed in Australia. It has three main components. The first focuses on a significant initiative taken by the Coombs Royal Commission on Australian Government Administration as a form of action research in the mid-1970s. The second highlights the associated work on access theory by the late Bernard Schaffer and his associates and explains why this work was of fundamental importance for the development of the idea of the one-stop shop. The third deals with subsequent Australian understandings and a pp lications of the idea.

Global start-ups profile : one size fits all?

Our research aims to answer the research questions “How do we commonly describe the global start-ups profile as evidenced in prior inductive research?” and “Does this global start-ups profile can effectively explain phenomena in Australian global start-up firms?” We systematically review 29 global start-ups (144 firms) qualitative articles to understand descriptive definitions of global-startup firms. We then triangulate this finding with an Australian high-tech firm. Our contribution is to form a descriptive profile of global start-up phenomenon and raise interesting issues that have potentially fruitful findings for both research and practice. This profile might well be just a deviant from the traditional model that describes how firms establish their footprints, first in their domestic markets followed by moves into cross-border activities. Regardless, government agencies, consultants, and entrepreneurs need to understand the phenomenon. Thus we anticipate that this phenomenon will continue to provide interesting issues for pursuit, both by researchers as well as the practitioner community.

One-step macroscopic alignment of conjugated polymer systems by epitaxial crystallization during spin-coating

The one-step preparation of highly anisotropic polymer semiconductor thin films directly from solution is demonstrated. The conjugated polymer poly(3-hexylthiophene) (P3HT) as well as P3HT:fullerene bulk-heterojunction blends can be spin-coated from a mixture of the crystallizable solvent 1,3,5-trichlorobenzene (TCB) and a second carrier solvent such as chlorobenzene. Solidification is initiated by growth of macroscopic TCB spherulites followed by epitaxial crystallization of P3HT on TCB crystals. Subsequent sublimation of TCB leaves behind a replica of the original TCB spherulites. Thus, highly ordered thin films are obtained, which feature square-centimeter-sized domains that are composed of one spherulite-like structure each. A combination of optical microscopy and polarized photoluminescence spectroscopy reveals radial alignment of the polymer backbone in case of P3HT, whereas P3HT:fullerene blends display a tangential orientation with respect to the center of spherulite-like structures. Moreover, grazing-incidence wide-angle X-ray scattering reveals an increased relative degree of crystallinity and predominantly flat-on conformation of P3HT crystallites in the blend. The use of other processing methods such as dip-coating is also feasible and offers uniaxial orientation of the macromolecule. Finally, the applicability of this method to a variety of other semi-crystalline conjugated polymer systems is established. Those include other poly(3-alkylthiophene)s, two polyfluorenes, the low band-gap polymer PCPDTBT, a diketopyrrolopyrrole (DPP) small molecule as well as a number of polymer:fullerene and polymer:polymer blends. Macroscopic spherulite-like structures of the conjugated polymer poly(3-hexylthiophene) (P3HT) grow directly during spin-coating. This is achieved by processing P3HT or P3HT:fullerene bulk heterojunction blends from a mixture of the crystallizable solvent 1,3,5-trichlorobenzene and a second carrier solvent such as chlorobenzene. Epitaxial growth of the polymer on solidified solvent crystals gives rise to circular-symmetric, spherulite-like structures that feature a high degree of anisotropy.

Connecting two wind turbine generators to the grid using only one three level NPC inverter

This paper explores the possibility of connecting two Wind Turbine Generators (WTG) to the grid using a single three level inverter. In the proposed system the rectified output of one WTG is connected across the upper dc-link capacitor of a standard diode clamped three level inverter. Similarly the rectified output of the other WTG is connected across the lower capacitor. This particular combination has several advantages such as, direct connection to the grid, reduced parts count, improved reliability and high power capacity. However, the major problem in the proposed system is the imminent imbalance of dc-link voltages. Under such conditions conventional modulation methods fail to produce desired voltage and current waveforms. A detailed analysis on this issue and a novel space vector modulation method, as the solution, are proposed in this paper. To track the Maximum power point of each WTG a power sharing algorithm is proposed. Simulation results are presented to attest the efficacy of the proposed system.

Prevalence and predictors of advance directives in Australia

Background Advance care planning is regarded as integral to better patient outcomes yet little is known about the prevalence of advance directives in Australia. Aims To determine the prevalence of advance directives (ADs) in the Australian population. Methods A national telephone survey about estate and advance planning. Sample was stratified by age (18-45 and >45 years) and quota sampling occurred based on population size in each State and Territory. Results Fourteen percent of the Australian population has an AD. There is State variation with people from South Australia and Queensland more likely to have an AD than people from other states. Will making and particularly completion of a financial enduring power of attorney are associated with higher rates of AD completion. Standard demographic variables were of limited use in predicting whether a person would have an AD. Conclusions Despite efforts to improve uptake of advance care planning (including ADs), barriers remain. One likely trigger for completing an AD and advance care planning is undertaking a wider future planning process (e.g. making a will or financial enduring power of attorney). This presents opportunities to increase advance care planning but steps are needed to ensure that planning which occurs outside the health system is sufficiently informed and supported by health information so that it is useful in the clinical setting. Variations by State could also suggest that redesign of regulatory frameworks (such as a user-friendly and well publicised form backed by statute) may help improve uptake of ADs.

Dancing through the Air (parts one and 2) - Spirit of Akasha

Recording for ARIA nominated Film Soundtrack for Spirit of Akasha. Recorded, Mixed, and Co-produced by Phil Graham. Published by Warner Music Australia

One year on : the devastating Queensland floods

"Tomorrow will mark the one year anniversary of the devastating floods that hit Queensland's Lockyer Valley and Toowoomba and starting today, we'll begin a series of interviews with survivors of those floods on the 10th of January last year. In today's program, Murphy's Creek resident Nelly Gitsham how she sent her family to safety and then ventured into the flood to try to save her neighbour's horse, only to find herself needing to be rescued by another neighbour, John Taylor." Reporter: Amanda Gearing

Perception of prescription medicine sample packs among Australian professional, government, industry, and consumer organizations, based on automated textual analysis of one-on-one interviews

Background Prescription medicine samples provided by pharmaceutical companies are predominantly newer and more expensive products. The range of samples provided to practices may not represent the drugs that the doctors desire to have available. Few studies have used a qualitative design to explore the reasons behind sample use. Objective The aim of this study was to explore the opinions of a variety of Australian key informants about prescription medicine samples, using a qualitative methodology. Methods Twenty-three organizations involved in quality use of medicines in Australia were identified, based on the authors' previous knowledge. Each organization was invited to nominate 1 or 2 representatives to participate in semistructured interviews utilizing seeding questions. Each interview was recorded and transcribed verbatim. Leximancer v2.25 text analysis software (Leximancer Pty Ltd., Jindalee, Queensland, Australia) was used for textual analysis. The top 10 concepts from each analysis group were interrogated back to the original transcript text to determine the main emergent opinions. Results A total of 18 key interviewees representing 16 organizations participated. Samples, patient, doctor, and medicines were the major concepts among general opinions about samples. The concept drug became more frequent and the concept companies appeared when marketing issues were discussed. The Australian Pharmaceutical Benefits Scheme and cost were more prevalent in discussions about alternative sample distribution models, indicating interviewees were cognizant of budgetary implications. Key interviewee opinions added richness to the single-word concepts extracted by Leximancer. Conclusions Participants recognized that prescription medicine samples have an influence on quality use of medicines and play a role in the marketing of medicines. They also believed that alternative distribution systems for samples could provide benefits. The cost of a noncommercial system for distributing samples or starter packs was a concern. These data will be used to design further research investigating alternative models for distribution of samples.

Cartels – What are they and how to avoid being part of one : the implications of University fee deregulation

Universities supply a range of services to students. These include most obviously, tuition services in relation to undergraduate and postgraduate courses; research supervision services in relation to research degrees; as well as consultancy services in relation to Government and industry work. For the purposes of the CCA, universities are trading corporations. They engage in trade or commerce through the provision of a range of services for reward. As such Universities are subject to the same rules and regulations that govern the conduct of other trading corporations, such Coles and Woolworths. As senior officers and managers of a trading corporation you need to acquire some basic understanding of the rules that govern competition in the education sector. In other sectors, companies generally undertake a risk assessment of those areas where they are most at risk of contravening the CCA; to ascertain in advance how problems might arise so that they can put in place strategies to mitigate the risk of inadvertent contraventions.

One-step homogeneous C-reactive protein assay for saliva

Background: Cardiovascular disease is the leading cause of death in the world. Human C-reactive protein (CRP) has been used in the risk assessment of coronary events. Human saliva mirrors the body's health and well-being and is non-invasive, easy to collect and ideal for third world countries as well as for large patient screening. The aim was to establish a saliva CRP reference range and to demonstrate the clinical utility of salivary CRP levels in assessing the coronary events in a primary health care setting. Methods: We have used a homogeneous bead based assay to detect CRP levels in human saliva. We have developed a rapid 15 min (vs 90 min), sequential, one-step assay to detect CRP in saliva. Saliva was collected from healthy volunteers (n = 55, ages 20-70 years) as well as from cardiac patients (n = 28, ages 43-86 years). Results: The assay incubation time was optimised from 90 min to 15 mm and generated a positive correlation (n = 29, range 10-2189 pg/mL, r2 = 0.94; Passing Bablok slope 0.885. Intercept 0, p>0.10), meaning we could decrease the incubation time and produce equivalent results with confidence. The mean CRP level in the saliva of healthy human volunteers was 285 pg/mL and in cardiac patients was 1680 pg/mL (p<0.01). Analysis of CRP concentrations in paired serum and saliva samples from cardiac patients gave a positive correlation (r2 = 0.84, p<0.001) and the salivary CRP concentration capable of distinguishing healthy from diseased patients. Conclusions: The results suggest that this minimally invasive, rapid and sensitive assay will be useful in large patient screening studies for risk assessment of coronary events. (C) 2011 Elsevier B.V. All rights reserved.