Desenvolvimento de um ressoador retangular de fenda com múltiplas camadas de substrato e com utilização de material PBG para sistema de comunicação sem fio

In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation. Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas. In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material. This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates. We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration. xviii The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material. The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM). Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern

Efeito da adição de argila expandida e adições minerais na formulação de concretos estruturais leves autoadensáveis

The search for alternative materials with lower density, reduction in heat transfer and propagation of noise associated with the ease of handling and application in concrete structures, represents an enormous challenge in the formulation and knowledge of the performance of self-compacting lightweight concrete, which has technology little known nationally, and appears on the international scene as an innovative material and alternative to conventional concrete. Based on these, this study set out to study self-compacting lightweight concrete made with two distinct grades of expanded clay associated with the addition of plasticizing/superplasticizers additives and mineral additions of metakaolin and bagasse ash of sugar cane. There is also an object of study, evaluation of pozzolanic activity of mineral admixtures and their influence on the durability characteristics of concrete. The rheological, physical, mechanical and microstructural analysis in this study served as basis in the classification of concretes autoadensáveis, targeting the national technical requirements for their classification in the category autoadensável and lightweight structural. The inclusion of mineral admixtures (metakaolin and bagasse ash of sugar cane), partial replacement of cement, pozzolanic activity and demonstrated maintenance of mechanical properties through the filler effect, a reduction of up to 76% of the nitrogen gas permeability in blend with 20% bagasse ash. All concretes had rheology (cohesion and consistency) suitable for self-adensability as well as strength and density inherent structural lightweight concrete without presenting phenomena of segregation and exudation

Preparação e caracterização de um material híbrido, à base de vermiculita modificada com quitosana, para a remoção de íons de chumbo presentes em efluentes sintéticos

Actually, surveys have been developed for obtaining new materials and methodologies that aim to minimize environmental problems due to discharges of industrial effluents contaminated with heavy metals. The adsorption has been used as an alternative technology effectively, economically viable and potentially important for the reduction of metals, especially when using natural adsorbents such as certain types of clay. Chitosan, a polymer of natural origin, present in the shells of crustaceans and insects, has also been used for this purpose. Among the clays, vermiculite is distinguished by its good ion exchange capacity and in its expanded form enhances its properties by greatly increasing its specific surface. This study aimed to evaluate the functionality of the hybrid material obtained through the modification of expanded vermiculite with chitosan in the removal of lead ions (II) in aqueous solution. The material was characterized by infrared spectroscopy (IR) in order to evaluate the efficiency of modification of matrix, the vermiculite, the organic material, chitosan. The thermal stability of the material and the ratio clay / polymer was evaluated by thermogravimetry. To evaluate the surface of the material was used in scanning electron microscopy (SEM) and (BET). The BET analysis revealed a significant increase in surface area of vermiculite that after interaction with chitosan, was obtained a value of 21, 6156 m2 / g. Adsorption tests were performed according to the particle size, concentration and time. The results show that the capacity of removal of ions through the vermiculite was on average 88.4% for lead in concentrations ranging from 20-200 mg / L and 64.2% in the concentration range of 1000 mg / L. Regarding the particle size, there was an increase in adsorption with decreasing particle size. In fuction to the time of contact, was observed adsorption equilibrium in 60 minutes with adsorption capacity. The data of the isotherms were fitted to equation Freundlich. The kinetic study of adsorption showed that the pseudo second- order model best describes the adsorption adsorption, having been found following values K2=0,024 g. mg-1 min-1and Qmax=25,75 mg/g, value very close to the calculated Qe = 26.31 mg / g. From the results we can conclude that the material can be used in wastewater treatment systems as a source of metal ions adsorbent due to its high adsorption capacity

Um estudo sobre custos de elaboração de material didático e tutoria em EaD online em uma Instituição de Ensino Superior no Brasil

This study has as main objective to verify the proportionality of the costs with elaboration of didactic material and costs with tutelage and instruction incurred in a higher education institution, located in national territory, and that offers a degree course in the education area in the modality of EaD online. The purpose of the measurement of this proportionality of the costs was of answering these they are, among other, the relevant costs incurred by the institution research object. This is a research of exploratory stamp whose methodological procedure adopted for your development, in what it refers the collection, analysis of the data and the investigation means, it is the case study, as well as the documental and bibliographical research. The found results indicate that the costs with elaboration of didactic material and the costs with tutelage and instruction are relevant, however they are not the only ones considered as such. The costs involved with acquisition and operation of specific softwares they also constitute an relevant costs. The structure of the costs can be altered in agreement with the analyzed period and in agreement with the characteristics of synchronism of the offered course. It was also verified that the technology used in this education modality it ends up generating additional costs incurred with professionals of specific knowledge in technology

Optimisation of a fermentation process for butanol production by particle swarm optimisation (PSO)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de material didático para o ensino de solos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização do custeio baseado em atividades em centro de material e esterilização como ferramenta gerencial

Pós-graduação em Enfermagem (mestrado profissional) - FMB

Desenvolvimento de método analítico para a determinação de vanádio em material vegetal por espectrometria de absorção atômica em forno de grafite

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento mecânico de material compósito de matriz poliéster reforçado por sistema híbrido fibras naturais e resíduos da indústria madeireira

Neste trabalho, materiais compósitos de matriz poliéster reforçados por fibras curtas de sisal, por resíduo de madeira e por sistema híbrido sisal/resíduo de madeira, dispostos aleatoriamente foram produzidos, utilizando-se o menor nível possível de processamento tecnológico nas etapas produtivas, com vistas a se produzir um compósito tecnicamente viável a pequenos produtores. A matriz de poliéster utilizada foi a tereftálica pré-acelerada com naftenato de cobalto e curada a temperatura ambiente com peróxido de metil-etil-cetona (MEK) em diferentes proporções em relação à resina, 0,33%, 1,66%, 3,33% e 5,00% em volume, de forma a se avaliar a influência deste nas propriedades mecânicas. As fibras de sisal foram cortadas manualmente nos comprimentos de 5, 10 e 15mm e utilizadas da maneira como adquiridas, sem tratamento superficial. O resíduo de madeira utilizado foi o pó de lixadeira da madeira maçaranduba. Os compósitos foram fabricados por moldagem manual, sem pressão e a temperatura ambiente. Foram fabricados corpos de prova de matriz pura, compósitos reforçados por sisal, variando-se o comprimento das fibras, compósitos reforçados por pó de maçaranduba e compósitos de reforço híbrido, sisal/pó de madeira, em diferentes proporções entre os constituintes. As propriedades mecânicas foram avaliadas por ensaios de tração e impacto charpy e as superfícies de fratura geradas foram avaliadas por microscopia eletrônica de varredura de modo a se correlacionar os aspectos de fratura com as propriedades mecânicas. Foi determinada a massa específica de cada série de corpos de prova fabricada, bem como a fração volumétrica dos reforços nos compósitos. Os resultados demonstraram que com o aumento do comprimento da fibra de sisal a resistência à tração e ao impacto dos compósitos foi incrementada, alcançando, o compósito com fibras de sisal de 15 mm, o melhor desempenho mecânico dentre as séries testadas. Por outro lado, a heterogeneidade granulométrica do pó de maçaranduba teve efeito negativo sobre as propriedades mecânicas dos compósitos. Os compósitos híbridos sisal/pó de madeira com maior teor de fibras, alcançaram 80% do desempenho obtido para os compósitos de fibras de sisal.

Objetos de ensino: a renovação pedagógica e material da escola primária no Brasil, no século XX

This article aims at analyzing the role of the objects of learning in the propositions for innovation of primary schools during the 20th century, highlighting the changes in the composition of school subjects having in mind the objects that were introduced and marked out as relevant for school modernization and those that remained or were redefined in terms of their finality and uses. The examination of three significant moments of the implementation of innovations in the elementary school is intended: the modernization by the intuitive method at the turn of the century; the propositions of Escola Nova between the 1930s and the 1950s; and the renovation represented by educational technology in the 1960s and 1970s.

Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study

Selecting a suitable place to install a new landfill is a hard work. Bauru is a Brazilian municipality where the local landfill currently in use has a life span that is almost over, and the selection of a new area for a future landfill is crucial and urgent. Here we use a geographic information system (GIS) approach to indicate possible suitable areas for installing the landfill. The considered criteria were: river network and the respective buffer zone, relief, urban areas and their respective buffer zone, existence of Areas for Environmental Protection (AEPs), occurrence of wells and their respective buffer zones, existence of airports and their buffer zones, wind direction, and the road network and its respective buffer zone. Due the facts that (1) Bauru has an urban area relatively large in relation to whole municipal area, (2) Bauru has two airports, and (3) this area encompasses parts of three AEPs, the model showed that there are few areas suitable and moderately suitable in Bauru, and the greater part of the municipality is unsuitable to install a new landfill. Due to this important finding reported here, the local policymakers should consider the suitable or even moderately suitable areas for analysis in situ or look for other creative solutions for destination of the solid waste. We highly encourage the use of GIS in studies that seek suitable areas for future landfills, having found that SIG was a tool that allowed fast and precise work and generated an outcome sufficiently clear of interpretation.Implications: Solid waste (SW) management is one of the main environmental concerns nowadays. Landfilling SW is still the main practice to disposal of such material. However, for many regions, suitable places for landfilling are getting scarce. This study proved this situation for a populous place in a southeastern Brazilian region. This study also showed how the decision makers should manage the problem in order to minimize the amount of SW generated and delivered for the landfill. Massive investment in education is a critical issue to reach the proposed aim.

Information technology as a technical resource for the memories: memories of UNATI-Marília in the virtual environment

UNATI (Open University of the Third Age), UNESP, Marília campus, has offered subsidies for the development of this work aimed at researching the existing relationships between information mediation processes and technological devices, especially computers, assuming that reading practices and textual construction in online environments could help the “third age” population to have access to these devices, thus promoting digital inclusion in this group. Mediation was presented as an interventionist action that, by introducing an intermediate element in the learning process, causes a rupture in the ways of living and personal digital inclusion processes hitherto experienced. In the context of a workshop, we found out that there is a physical relationship between subjects and technological supports and such a contact proved to be necessary, considering that handling a computer required knowledge of procedures, thus furthering a logic of use. It turned out to be necessary to develop actions that would enable the handling of a computer so as to bring about acceptance of these supports. Accordingly, activities were developed so as to articulate reminiscent processes, memories of older adults, the writing down of such memories and the creation of a blog to bring enhanced visibility to the content produced by older people. Such actions have shown that remembering, writing down and posting can reshape not only social relations but somehow significantly promote digital inclusion among older adults.

TACTILE CARTOGRAPHY EXPERIENCES IN BRAZIL: METHODOLOGIES AND DIDACTICAL MATERIAL WITH TECHNOLOGICAL RESOURCES FOR INCLUSION OF BLIND AND LOW VISION STUDENTS

The tactile cartography is an area of Cartography that aims the development of methodologies and didactical material to work cartographic concepts with blind and low vision people. The main aim of this article is to present the experience of Tactile Cartography Research Group from Sao Paulo State University (UNESP), including some didactical material and courses for teachers using the System MAPAVOX. The System MAPAVOX is software developed by our research group in a partnership with Federal University of Rio de Janeiro (UFRJ) that integrates maps and models with a voice synthesizer, sound emission, texts, images and video visualizing for computers. Our research methodology is based in authors that have in the students the centre of didactical activity such as Ochaita and Espinosa in [1], which developed studies related to blind children's literacy. According to Almeida the child's drawing is, thus, a system of representation. It isn't a copy of objects, but interpretation of that which is real, done by the child in graphic language[2]. In the proposed activities with blind and low vision students they are prepared to interpret reality and represent it by adopting concepts of graphic language learned. To start the cartographic initialization it is necessary to use personal and quotidian references, for example the classroom tactile model or map, to include concepts in generalization and scale concerning to their space of life. During these years many case studies were developed with blind and low vision students from Special School for Hearing Impaired and Visually Impaired in Araras and Rio Claro, Sao Paulo - Brazil. The most part of these experiences and others from Brazil and Chile are presented in [3]. Tactile material and MAPAVOX facilities are analysed by students and teachers who contribute with suggestions to reformulate and adapt them to their sensibility and necessity. Since 2005 we offer courses in Tactile Cartography to prepare teachers from elementary school in the manipulation of didactical material and attending students with special educational needs in regular classroom. There were 6 classroom and blended courses offered for 184 teachers from public schools in this region of the Sao Paulo state. As conclusion we can observe that methodological procedures centred in the blind and low vision students are successful in their spatial orientation if use didactical material from places or objects with which they have significant experience. During the applying of courses for teachers we could see that interdisciplinary groups can find creative cartographic alternatives more easily. We observed too that the best results in methodological procedures were those who provided concreteness to abstract concepts using daily experiences.

Estudo da tecnologia RFID e sua aplicação na gestão de estoques

Due to the need of more agility, dynamism and reliability in stock management, the market has turned its attention to RFID, which offers a practical solution and live up to the big corporations' expectations. The search for continuous improvement establishes a direct link with RFID, for its technology offers accurate real time information in any monitored given place. RFID is a radio frequency communication technology. A reader communicates to a tag through waves. This tag can be active, with a battery, or passive, in which its power is supplied by currents induced by the field variation it is exposed to. The RFID technology has a well defined basic principle, but there are many constructive ways of implementing it. The adaptability as well as the flexibility regard to the several kinds of stock in industry, reaching their particular needs. RFID can lower maintenance costs in stock by collecting data more accurately, lowering human error and optimizing the item handling at its reception, exit and while it is inside the company. This paper presents an example of RFID technology applied in a company's stock management. It is possible to prove that there are, in fact, great advantages in implementing this technology, as it creates the opportunity for continuous improvement in stock management, with better application of material, labour and quality tools, since the data collected through an automatized process using RFID are more reliable and dynamic

The effect of biomass immobilization support material and bed porosity on hydrogen production in an upflow anaerobic packed-bed bioreactor

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)