Towards a new concept of leadership

In the present work we have posited some necessary guidelines to reformulate an essential pillar of leadership: the relationship group-leader. The set of enunciations that are developed are meant to establish the basic principles of the theoretical interpretation of this essential phenomenon of social life. In most works dealing with leadership we usually find that texts are centred on the leader. However, the process possesses another member of even greater importance embodied in the social group that forms around him or her. Thus, social actors need to reach a higher degree of sociability and to express, amongst other things, needs and goals, and they look for them openly in a chosen representative. And he or she, in turn, must fulfil the expectations of the group. In other words, the asymmetry of said relationship is inverted. Moreover, at the leader's end, we must discern between the person and the 'character'. This is how the particular game of leadership unfolds. The resulting construct accounts for the construction of a significant social feat.

Towards a new concept of leadership

In the present work we have posited some necessary guidelines to reformulate an essential pillar of leadership: the relationship group-leader. The set of enunciations that are developed are meant to establish the basic principles of the theoretical interpretation of this essential phenomenon of social life. In most works dealing with leadership we usually find that texts are centred on the leader. However, the process possesses another member of even greater importance embodied in the social group that forms around him or her. Thus, social actors need to reach a higher degree of sociability and to express, amongst other things, needs and goals, and they look for them openly in a chosen representative. And he or she, in turn, must fulfil the expectations of the group. In other words, the asymmetry of said relationship is inverted. Moreover, at the leader's end, we must discern between the person and the 'character'. This is how the particular game of leadership unfolds. The resulting construct accounts for the construction of a significant social feat.

Warming and acidification experiment on early life-stage F. vesiculosus under natural fluctuation and seasonal variations (spring 2013 - 2014)

Genetic diversity of baltic F. vesiculosus is low compared to other populations which might jeopardize their potential for adaptation to climate change. Especially the early life-stage F. vesiculosus may be threaten by ocean warming and acidification. To test this, we exposed F. vesiculosus germlings to warming and acidification in the near-natural scenario in the "Kiel Outdoor Benthocosms" maintaining the natural variation of the Kiel Fjord, Germany (54°27 'N, 10°11 'W) in all seasons (spring 2013 - 2014). Warming was simulated by using a delta treatment adding 5 °C and by increasing pCO2 at 1000 µatm. Warming positively affected germlings' growth in spring and in summer but decreased non-photochemical quenching in spring and survival in summer. Acidified conditions showed much weaker effects than warming. The high genotypic variation in stress sensitivity as well as the enhanced survival at high diversity levels indicate higher potential for adaptation for genetically diverse populations. We conclude that the combination of stressors and season determines the sensitivity to environmental stress and that genetic variation is crucial for the adaptation to climate change stress.

Case Study of Applied LIP Approach/Activities in the Philippines The Training Services Enhancement Project for Rural Life Improvement (TSEP-RLI) Experience

TSEP-RLI was a technical cooperation project jointly conducted by GOP thru DA-Agricultural Training Institute (ATI) and GOJ thru JICA aimed at institutionalizing the training program for Rural Life Improvement (RLI) at the (ATI). As expected, farmers, fisherfolk, women, youth and extension agents were provided with efficient and effective training services from ATI leading to the improvement of quality of life in the rural areas through efforts of human resource development. The ATI- Bohol was chosen as the model center where participatory trials and various activities of the project were undertaken for five years. These activities were participatory surveys and data collection of on-farm and off-farm productive activities; planning workshop for RLI; feedbacking of survey results and action plans to the community and the Local Government Units (LGUs), and signing of Memorandum of Agreement between the Project and participating LGUs. The above activities were done to facilitate the planning and development of most effective and necessary rural life improvement activities, to confirm the willingness of the people to support and participate and to formalize the partnership between the Project and the LGUs. Since the concept of rural life covers a vast range of activities, a consensus had been reached that the total aspects of rural life be grasped in three spheres, namely, Production & Livelihood (P/L), Rural Living Condition (RLC) and Community Environment (C/E). The RLI for Ubi (Yam) Growers was one of the pilot activities undertaken in two pilot barangays and the target beneficiaries were members of the Rural Improvement Club (RIC- a group of organized women) with the LGU of the Municipality of Corella as the implementing partner. During the planning workshop, the barangay residents articulated their desire to promote production and processing of ubi (sphere on P/L - as the entry point), lack of nutritious food was one of the identified problem (sphere on RLC- expansion point) and environmental degradation such as deforestation, and soil erosion was another problem articulated by the community people (sphere on C/E- expansion point). Major activities that were undertaken namely, Ubi cooking contest, cooking/processing seminar, training courses on entrepreneurial development, ubi production and storage technology, packaging and product design, human resource development and simplified bookkeeping motivated the beneficiaries as well as developed and enhanced their skills & capabilities while strengthening their associations. Their participation to the 5 ubi festivals and other related activities had brought some impacts on their economic and rural life improvement activities. The seven principles of TSEP-RLI include the participatory process, holistic approach, dialogical approach, bottom -up training needs assessment, demand-driven approach, cost sharing approach and collaborative implementation with other agencies including LGUs and the community.

Concept of project: learning lessons

The concept of Project encompasses a semantic disparity that involves all areas of professional and nonprofessional activity. In the engineering projects domain, and starting by the etymological roots of the terms, a review of the definitions given by different authors and their relation with sociological trends of the last decades is carried out. The engineering projects began as a tool for the development of technological ideas and have been improved with legal, economic and management parameters and recently with environmental aspects. However, the engineering projects involve people, groups, agents, organizations, companies and institutions. Nowadays, the social implications of projects are taken into consideration but the technology for social integration is not consolidated. This communication provides a new framework based on the experience for the development of engineering projects in the context of "human development", placing people in the center of the project

The new challenges of end-of-life tyres management systems: a Spanish case study

Directive 2008/98/EC released by the European Union represents a significant step forward in all relevant aspects of waste management. Under the already established, extended produced responsibility (EPR) principle, new policies have been enunciated to continuously achieve better overall environmental performance of key products throughout their life phases. This paper discusses how the directive is being articulated in Spain by the main integrated management system (IMS) for end-of-life (EOL) tyres since its creation in 2006. Focusing on the IMS technological, economic and legal aspects, the study provides a global perspective and evaluation of how the IMS is facing the current issues to resolve, the new challenges that have appeared and the management vision for the coming years.

Output Impedance Correction Circuit (OICC): A New Concept to Improve the Dynamic Response of DC/DC Converters with Additional Energy Path

El desarrollo da las nuevas tecnologías permite a los ingenieros llevar al límite el funcionamiento de los circuitos integrados (Integrated Circuits, IC). Las nuevas generaciones de procesadores, DSPs o FPGAs son capaces de procesar la información a una alta velocidad, con un alto consumo de energía, o esperar en modo de baja potencia con el mínimo consumo posible. Esta gran variación en el consumo de potencia y el corto tiempo necesario para cambiar de un nivel al otro, afecta a las especificaciones del Módulo de Regulador de Tensión (Voltage Regulated Module, VRM) que alimenta al IC. Además, las características adicionales obligatorias, tales como adaptación del nivel de tensión (Adaptive Voltage Positioning, AVP) y escalado dinámico de la tensión (Dynamic Voltage Scaling, DVS), imponen requisitos opuestas en el diseño de la etapa de potencia del VRM. Para poder soportar las altas variaciones de los escalones de carga, el condensador de filtro de salida del VRM se ha de sobredimensionar, penalizando la densidad de energía y el rendimiento durante la operación de DVS. Por tanto, las actuales tendencias de investigación se centran en mejorar la respuesta dinámica del VRM, mientras se reduce el tamaño del condensador de salida. La reducción del condensador de salida lleva a menor coste y una prolongación de la vida del sistema ya que se podría evitar el uso de condensadores voluminosos, normalmente implementados con condensadores OSCON. Una ventaja adicional es que reduciendo el condensador de salida, el DVS se puede realizar más rápido y con menor estrés de la etapa de potencia, ya que la cantidad de carga necesaria para cambiar la tensión de salida es menor. El comportamiento dinámico del sistema con un control lineal (Control Modo Tensión, VMC, o Control Corriente de Pico, Peak Current Mode Control, PCMC,…) está limitado por la frecuencia de conmutación del convertidor y por el tamaño del filtro de salida. La reducción del condensador de salida se puede lograr incrementando la frecuencia de conmutación, así como incrementando el ancho de banda del sistema, y/o aplicando controles avanzados no-lineales. Usando esos controles, las variables del estado se saturan para conseguir el nuevo régimen permanente en un tiempo mínimo, así como el filtro de salida, más específicamente la pendiente de la corriente de la bobina, define la respuesta de la tensión de salida. Por tanto, reduciendo la inductancia de la bobina de salida, la corriente de bobina llega más rápido al nuevo régimen permanente, por lo que una menor cantidad de carga es tomada del condensador de salida durante el tránsito. El inconveniente de esa propuesta es que el rendimiento del sistema es penalizado debido al incremento de pérdidas de conmutación y las corrientes RMS. Para conseguir tanto la reducción del condensador de salida como el alto rendimiento del sistema, mientras se satisfacen las estrictas especificaciones dinámicas, un convertidor multifase es adoptado como estándar para aplicaciones VRM. Para asegurar el reparto de las corrientes entre fases, el convertidor multifase se suele implementar con control de modo de corriente. Para superar la limitación impuesta por el filtro de salida, la segunda posibilidad para reducir el condensador de salida es aplicar alguna modificación topológica (Topologic modifications) de la etapa básica de potencia para incrementar la pendiente de la corriente de bobina y así reducir la duración de tránsito. Como el transitorio se ha reducido, una menor cantidad de carga es tomada del condensador de salida bajo el mismo escalón de la corriente de salida, con lo cual, el condensador de salida se puede reducir para lograr la misma desviación de la tensión de salida. La tercera posibilidad para reducir el condensador de salida del convertidor es introducir un camino auxiliar de energía (additional energy path, AEP) para compensar el desequilibrio de la carga del condensador de salida reduciendo consecuentemente la duración del transitorio y la desviación de la tensión de salida. De esta manera, durante el régimen permanente, el sistema tiene un alto rendimiento debido a que el convertidor principal con bajo ancho de banda es diseñado para trabajar con una frecuencia de conmutación moderada para conseguir requisitos estáticos. Por otro lado, el comportamiento dinámico durante los transitorios es determinado por el AEP con un alto ancho de banda. El AEP puede ser implementado como un camino resistivo, como regulador lineal (Linear regulator, LR) o como un convertidor conmutado. Las dos primeras implementaciones proveen un mayor ancho de banda, acosta del incremento de pérdidas durante el transitorio. Por otro lado, la implementación del convertidor computado presenta menor ancho de banda, limitado por la frecuencia de conmutación, aunque produce menores pérdidas comparado con las dos anteriores implementaciones. Dependiendo de la aplicación, la implementación y la estrategia de control del sistema, hay una variedad de soluciones propuestas en el Estado del Arte (State-of-the-Art, SoA), teniendo diferentes propiedades donde una solución ofrece más ventajas que las otras, pero también unas desventajas. En general, un sistema con AEP ideal debería tener las siguientes propiedades: 1. El impacto del AEP a las pérdidas del sistema debería ser mínimo. A lo largo de la operación, el AEP genera pérdidas adicionales, con lo cual, en el caso ideal, el AEP debería trabajar por un pequeño intervalo de tiempo, solo durante los tránsitos; la otra opción es tener el AEP constantemente activo pero, por la compensación del rizado de la corriente de bobina, se generan pérdidas innecesarias. 2. El AEP debería ser activado inmediatamente para minimizar la desviación de la tensión de salida. Para conseguir una activación casi instantánea, el sistema puede ser informado por la carga antes del escalón o el sistema puede observar la corriente del condensador de salida, debido a que es la primera variable del estado que actúa a la perturbación de la corriente de salida. De esa manera, el AEP es activado con casi cero error de la tensión de salida, logrando una menor desviación de la tensión de salida. 3. El AEP debería ser desactivado una vez que el nuevo régimen permanente es detectado para evitar los transitorios adicionales de establecimiento. La mayoría de las soluciones de SoA estiman la duración del transitorio, que puede provocar un transitorio adicional si la estimación no se ha hecho correctamente (por ejemplo, si la corriente de bobina del convertidor principal tiene un nivel superior o inferior al necesitado, el regulador lento del convertidor principal tiene que compensar esa diferencia una vez que el AEP es desactivado). Otras soluciones de SoA observan las variables de estado, asegurando que el sistema llegue al nuevo régimen permanente, o pueden ser informadas por la carga. 4. Durante el transitorio, como mínimo un subsistema, o bien el convertidor principal o el AEP, debería operar en el lazo cerrado. Implementando un sistema en el lazo cerrado, preferiblemente el subsistema AEP por su ancho de banda elevado, se incrementa la robustez del sistema a los parásitos. Además, el AEP puede operar con cualquier tipo de corriente de carga. Las soluciones que funcionan en el lazo abierto suelen preformar el control de balance de carga con mínimo tiempo, así reducen la duración del transitorio y tienen un impacto menor a las pérdidas del sistema. Por otro lado, esas soluciones demuestran una alta sensibilidad a las tolerancias y parásitos de los componentes. 5. El AEP debería inyectar la corriente a la salida en una manera controlada, así se reduce el riesgo de unas corrientes elevadas y potencialmente peligrosas y se incrementa la robustez del sistema bajo las perturbaciones de la tensión de entrada. Ese problema suele ser relacionado con los sistemas donde el AEP es implementado como un convertidor auxiliar. El convertidor auxiliar es diseñado para una potencia baja, con lo cual, los dispositivos elegidos son de baja corriente/potencia. Si la corriente no es controlada, bajo un pico de tensión de entrada provocada por otro parte del sistema (por ejemplo, otro convertidor conectado al mismo bus), se puede llegar a un pico en la corriente auxiliar que puede causar la perturbación de tensión de salida e incluso el fallo de los dispositivos del convertidor auxiliar. Sin embargo, cuando la corriente es controlada, usando control del pico de corriente o control con histéresis, la corriente auxiliar tiene el control con prealimentación (feed-forward) de tensión de entrada y la corriente es definida y limitada. Por otro lado, si la solución utiliza el control de balance de carga, el sistema puede actuar de forma deficiente si la tensión de entrada tiene un valor diferente del nominal, provocando que el AEP inyecta/toma más/menos carga que necesitada. 6. Escalabilidad del sistema a convertidores multifase. Como ya ha sido comentado anteriormente, para las aplicaciones VRM por la corriente de carga elevada, el convertidor principal suele ser implementado como multifase para distribuir las perdidas entre las fases y bajar el estrés térmico de los dispositivos. Para asegurar el reparto de las corrientes, normalmente un control de modo corriente es usado. Las soluciones de SoA que usan VMC son limitadas a la implementación con solo una fase. Esta tesis propone un nuevo método de control del flujo de energía por el AEP y el convertidor principal. El concepto propuesto se basa en la inyección controlada de la corriente auxiliar al nodo de salida donde la amplitud de la corriente es n-1 veces mayor que la corriente del condensador de salida con las direcciones apropiadas. De esta manera, el AEP genera un condensador virtual cuya capacidad es n veces mayor que el condensador físico y reduce la impedancia de salida. Como el concepto propuesto reduce la impedancia de salida usando el AEP, el concepto es llamado Output Impedance Correction Circuit (OICC) concept. El concepto se desarrolla para un convertidor tipo reductor síncrono multifase con control modo de corriente CMC (incluyendo e implementación con una fase) y puede operar con la tensión de salida constante o con AVP. Además, el concepto es extendido a un convertidor de una fase con control modo de tensión VMC. Durante la operación, el control de tensión de salida de convertidor principal y control de corriente del subsistema OICC están siempre cerrados, incrementando la robustez a las tolerancias de componentes y a los parásitos del cirquito y permitiendo que el sistema se pueda enfrentar a cualquier tipo de la corriente de carga. Según el método de control propuesto, el sistema se puede encontrar en dos estados: durante el régimen permanente, el sistema se encuentra en el estado Idle y el subsistema OICC esta desactivado. Por otro lado, durante el transitorio, el sistema se encuentra en estado Activo y el subsistema OICC está activado para reducir la impedancia de salida. El cambio entre los estados se hace de forma autónoma: el sistema entra en el estado Activo observando la corriente de condensador de salida y vuelve al estado Idle cunado el nuevo régimen permanente es detectado, observando las variables del estado. La validación del concepto OICC es hecha aplicándolo a un convertidor tipo reductor síncrono con dos fases y de 30W cuyo condensador de salida tiene capacidad de 140μF, mientras el factor de multiplicación n es 15, generando en el estado Activo el condensador virtual de 2.1mF. El subsistema OICC es implementado como un convertidor tipo reductor síncrono con PCMC. Comparando el funcionamiento del convertidor con y sin el OICC, los resultados demuestran que se ha logrado una reducción de la desviación de tensión de salida con factor 12, tanto con funcionamiento básico como con funcionamiento AVP. Además, los resultados son comparados con un prototipo de referencia que tiene la misma etapa de potencia y un condensador de salida físico de 2.1mF. Los resultados demuestran que los dos sistemas tienen el mismo comportamiento dinámico. Más aun, se ha cuantificado el impacto en las pérdidas del sistema operando bajo una corriente de carga pulsante y bajo DVS. Se demuestra que el sistema con OICC mejora el rendimiento del sistema, considerando las pérdidas cuando el sistema trabaja con la carga pulsante y con DVS. Por lo último, el condensador de salida de sistema con OICC es mucho más pequeño que el condensador de salida del convertidor de referencia, con lo cual, por usar el concepto OICC, la densidad de energía se incrementa. En resumen, las contribuciones principales de la tesis son: • El concepto propuesto de Output Impedance Correction Circuit (OICC), • El control a nivel de sistema basado en el método usado para cambiar los estados de operación, • La implementación del subsistema OICC en lazo cerrado conjunto con la implementación del convertidor principal, • La cuantificación de las perdidas dinámicas bajo la carga pulsante y bajo la operación DVS, y • La robustez del sistema bajo la variación del condensador de salida y bajo los escalones de carga consecutiva. ABSTRACT Development of new technologies allows engineers to push the performance of the integrated circuits to its limits. New generations of processors, DSPs or FPGAs are able to process information with high speed and high consumption or to wait in low power mode with minimum possible consumption. This huge variation in power consumption and the short time needed to change from one level to another, affect the specifications of the Voltage Regulated Module (VRM) that supplies the IC. Furthermore, additional mandatory features, such as Adaptive Voltage Positioning (AVP) and Dynamic Voltage Scaling (DVS), impose opposite trends on the design of the VRM power stage. In order to cope with high load-step amplitudes, the output capacitor of the VRM power stage output filter is drastically oversized, penalizing power density and the efficiency during the DVS operation. Therefore, the ongoing research trend is directed to improve the dynamic response of the VRM while reducing the size of the output capacitor. The output capacitor reduction leads to a smaller cost and longer life-time of the system since the big bulk capacitors, usually implemented with OSCON capacitors, may not be needed to achieve the desired dynamic behavior. An additional advantage is that, by reducing the output capacitance, dynamic voltage scaling (DVS) can be performed faster and with smaller stress on the power stage, since the needed amount of charge to change the output voltage is smaller. The dynamic behavior of the system with a linear control (Voltage mode control, VMC, Peak Current Mode Control, PCMC,…) is limited by the converter switching frequency and filter size. The reduction of the output capacitor can be achieved by increasing the switching frequency of the converter, thus increasing the bandwidth of the system, and/or by applying advanced non-linear controls. Applying nonlinear control, the system variables get saturated in order to reach the new steady-state in a minimum time, thus the output filter, more specifically the output inductor current slew-rate, determines the output voltage response. Therefore, by reducing the output inductor value, the inductor current reaches faster the new steady state, so a smaller amount of charge is taken from the output capacitor during the transient. The drawback of this approach is that the system efficiency is penalized due to increased switching losses and RMS currents. In order to achieve both the output capacitor reduction and high system efficiency, while satisfying strict dynamic specifications, a Multiphase converter system is adopted as a standard for VRM applications. In order to ensure the current sharing among the phases, the multiphase converter is usually implemented with current mode control. In order to overcome the limitation imposed by the output filter, the second possibility to reduce the output capacitor is to apply Topologic modifications of the basic power stage topology in order to increase the slew-rate of the inductor current and, therefore, reduce the transient duration. Since the transient is reduced, smaller amount of charge is taken from the output capacitor under the same load current, thus, the output capacitor can be reduced to achieve the same output voltage deviation. The third possibility to reduce the output capacitor of the converter is to introduce an additional energy path (AEP) to compensate the charge unbalance of the output capacitor, consequently reducing the transient time and output voltage deviation. Doing so, during the steady-state operation the system has high efficiency because the main low-bandwidth converter is designed to operate at moderate switching frequency, to meet the static requirements, whereas the dynamic behavior during the transients is determined by the high-bandwidth auxiliary energy path. The auxiliary energy path can be implemented as a resistive path, as a Linear regulator, LR, or as a switching converter. The first two implementations provide higher bandwidth, at the expense of increasing losses during the transient. On the other hand, the switching converter implementation presents lower bandwidth, limited by the auxiliary converter switching frequency, though it produces smaller losses compared to the two previous implementations. Depending on the application, the implementation and the control strategy of the system, there is a variety of proposed solutions in the State-of-the-Art (SoA), having different features where one solution offers some advantages over the others, but also some disadvantages. In general, an ideal additional energy path system should have the following features: 1. The impact on the system losses should be minimal. During its operation, the AEP generates additional losses, thus ideally, the AEP should operate for a short period of time, only when the transient is occurring; the other option is to have the AEP constantly on, but due to the inductor current ripple compensation at the output, unnecessary losses are generated. 2. The AEP should be activated nearly instantaneously to prevent bigger output voltage deviation. To achieve near instantaneous activation, the converter system can be informed by the load prior to the load-step or the system can observe the output capacitor current, which is the first system state variable that reacts on the load current perturbation. In this manner, the AEP is turned on with near zero output voltage error, providing smaller output voltage deviation. 3. The AEP should be deactivated once the new steady state is reached to avoid additional settling transients. Most of the SoA solutions estimate duration of the transient which may cause additional transient if the estimation is not performed correctly (e.g. if the main converter inductor current has higher or lower value than needed, the slow regulator of the main converter needs to compensate the difference after the AEP is deactivated). Other SoA solutions are observing state variables, ensuring that the system reaches the new steady state or they are informed by the load. 4. During the transient, at least one subsystem, either the main converter or the AEP, should be in closed-loop. Implementing a closed loop system, preferably the AEP subsystem, due its higher bandwidth, increases the robustness under system tolerances and circuit parasitic. In addition, the AEP can operate with any type of load. The solutions that operate in open loop usually perform minimum time charge balance control, thus reducing the transient length and minimizing the impact on the losses, however they are very sensitive to tolerances and parasitics. 5. The AEP should inject current at the output in a controlled manner, thus reducing the risk of high and potentially damaging currents and increasing robustness on the input voltage deviation. This issue is mainly related to the systems where AEP is implemented as auxiliary converter. The auxiliary converter is designed for small power and, as such, the MOSFETs are rated for small power/currents. If the current is not controlled, due to the some unpredicted spike in input voltage caused by some other part of the system (e.g. different converter), it may lead to a current spike in auxiliary current which will cause the perturbation of the output voltage and even failure of the switching components of auxiliary converter. In the case when the current is controlled, using peak CMC or Hysteretic Window CMC, the auxiliary converter has inherent feed-forwarding of the input voltage in current control and the current is defined and limited. Furthermore, if the solution employs charge balance control, the system may perform poorly if the input voltage has different value than the nominal, causing that AEP injects/extracts more/less charge than needed. 6. Scalability of the system to multiphase converters. As commented previously, in VRM applications, due to the high load currents, the main converters are implemented as multiphase to redistribute losses among the modules, lowering temperature stress of the components. To ensure the current sharing, usually a Current Mode Control (CMC) is employed. The SoA solutions that are implemented with VMC are limited to a single stage implementation. This thesis proposes a novel control method of the energy flow through the AEP and the main converter system. The proposed concept relays on a controlled injection of the auxiliary current at the output node where the instantaneous current value is n-1 times bigger than the output capacitor current with appropriate directions. Doing so, the AEP creates an equivalent n times bigger virtual capacitor at the output, thus reducing the output impedance. Due to the fact that the proposed concept reduces the output impedance using the AEP, it has been named the Output Impedance Correction Circuit (OICC) concept. The concept is developed for a multiphase CMC synchronous buck converter (including a single phase implementation), operating with a constant output voltage and with AVP feature. Further, it is extended to a single phase VMC synchronous buck converter. During the operation, the main converter voltage loop and the OICC subsystem capacitor current loop is constantly closed, increasing the robustness under system tolerances and circuit parasitic and allowing the system to operate with any load-current shape or pattern. According to the proposed control method, the system operates in two states: during the steady-state the system is in the Idle state and the OICC subsystem is deactivated, while during the load-step transient the system is in the Active state and the OICC subsystem is activated in order to reduce the output impedance. The state changes are performed autonomously: the system enters in the Active state by observing the output capacitor current and it returns back to the Idle state when the steady-state operation is detected by observing the state variables. The validation of the OICC concept has been done by applying it to a 30W two phase synchronous buck converter with 140μF output capacitor and with the multiplication factor n equal to 15, generating during the Active state equivalent output capacitor of 2.1mF. The OICC subsystem is implemented as single phase PCMC synchronous buck converter. Comparing the converter operation with and without the OICC the results demonstrate that the 12 times reduction of the output voltage deviation is achieved, for both basic operation and for the AVP operation. Furthermore, the results have been compared to a reference prototype which has the same power stage and a fiscal output capacitor of 2.1mF. The results show that the two systems have the same dynamic behavior. Moreover, an impact on the system losses under the pulsating load and DVS operation has been quantified and it has been demonstrated that the OICC system has improved the system efficiency, considering the losses when the system operates with the pulsating load and the DVS operation. Lastly, the output capacitor of the OICC system is much smaller than the reference design output capacitor, therefore, by applying the OICC concept the power density can be increased. In summary, the main contributions of the thesis are: • The proposed Output Impedance Correction Circuit (OICC) concept, • The system level control based on the used approach to change the states of operation, • The OICC subsystem closed-loop implementation, together with the main converter implementation, • The dynamic losses under the pulsating load and the DVS operation quantification, and • The system robustness on the capacitor impedance variation and consecutive load-steps.

La casa crecedera. El crecimiento programado de la vivienda con innovación europea y economía de medios latinoamericana

El concepto de casa crecedera, tal y como lo conocemos en la actualidad, se acuñó por primera vez en 1932 en el concurso Das Wachsende Haus organizado por Martin Wagner y Hans Poelzig dentro del marco de la Exposición Internacional Sonne, Luft und Haus für alle, promovida por la Oficina de Turismo de la ciudad de Berlín. En dicho concurso, se definía este tipo de vivienda como aquella célula básica o vivienda semilla que, dependiendo de las necesidades y posibilidades de los habitantes, podía crecer mediante otras estancias, conformando una vivienda completa en sí misma en cada fase de crecimiento. Numerosos arquitectos de primer orden, tales como Walter Gropius, Bruno Taut, Erich Mendelsohn o Hans Scharoun, participaron en este concurso, abriendo una nueva vía de exploración dentro de la vivienda flexible, la del crecimiento programado. A partir de ese momento, en Europa, y subsecuentemente en EEUU y otras regiones desarrolladas, se iniciaron numerosas investigaciones teóricas y prácticas en torno al fenómeno del crecimiento en la vivienda desde un enfoque vinculado a la innovación, tanto espacial como técnica. Por otro lado, aunque dentro del marco de la arquitectura popular de otros países, ya se ensayaban viviendas crecederas desde el siglo XVIII debido a que, por su tamaño, eran más asequibles dentro del mercado. Desde los años treinta, numerosos países en vías de desarrollo tuvieron que lidiar con migraciones masivas del campo a la ciudad, por lo que se construyeron grandes conjuntos habitacionales que, en numerosos casos, estaban conformados por viviendas crecederas. En todos ellos, la aproximación al crecimiento de la vivienda se daba desde una perspectiva diferente a la de los países desarrollados. Se primaba la economía de medios, el uso de sistemas constructivos de bajo costo y, en muchos casos, se fomentaba incluso la autoconstrucción guiada, frente a las construcciones prefabricadas ensambladas por técnicos especializados que se proponían, por ejemplo, en los casos europeos. Para realizar esta investigación, se recopiló información de estas y otras viviendas. A continuación, se identificaron distintas maneras de producir el crecimiento, atendiendo a su posición relativa respecto de la vivienda semilla, a las que se denominó mecanismos de ampliación, utilizados indistintamente sin tener en cuenta la ubicación geográfica de cada casa. La cuestión de porqué se prefiere un mecanismo en lugar de otro en un caso determinado, desencadenó el principal objetivo de esta Tesis: la elaboración de un sistema de análisis y diagnóstico de la vivienda crecedera que, de acuerdo a determinados parámetros, permitiera indicar cuál es la ampliación o sucesión de ampliaciones óptimas para una familia concreta, en una ubicación establecida. Se partió de la idea de que el crecimiento de la vivienda está estrechamente ligado a la evolución de la unidad de convivencia que reside en ella, de manera que la casa se transformó en un hábitat dinámico. Además se atendió a la complejidad y variabilidad del fenómeno, sujeto a numerosos factores socio-económicos difícilmente previsibles en el tiempo, pero fácilmente monitorizables según unos patrones determinados vinculados a la normatividad, el número de habitantes, el ahorro medio, etc. Como consecuencia, para el diseño del sistema de optimización de la vivienda crecedera, se utilizaron patrones evolutivos. Dichos patrones, alejados ya del concepto espacial y morfológico usualmente utilizado en arquitectura por figuras como C. Alexander o J. Habraken, pasaron a entenderse como una secuencia de eventos en el tiempo (espaciales, sociales, económicos, legales, etc.), que describen el proceso de transformación y que son peculiares de cada vivienda. De esta manera, el tiempo adquirió una especial importancia al convertirse en otro material más del proyecto arquitectónico. Fue en la construcción de los patrones donde se identificaron los mencionados mecanismos de ampliación, entendidos también como sistemas de compactación de la ciudad a través de la ocupación tridimensional del espacio. Al estudiar la densidad, mediante los conceptos de holgura y hacinamiento, se aceptó la congestión de las ciudades como un valor positivo. De esta forma, las posibles transformaciones realizadas por los habitantes (previstas desde un inicio) sobre el escenario del habitar (vivienda semilla), se convirtieron también en herramientas de proyecto urbano que responden a condicionantes del lugar y de los habitantes con distintas intensidades de crecimiento, ocupación y densidad. Igualmente, en el proceso de diseño del sistema de optimización, se detectaron las estrategias para la adaptabilidad y transformación de la casa crecedera, es decir, aquella serie de acciones encaminadas a la alteración de la vivienda para facilitar su ampliación, y que engloban desde sistemas constructivos en espera, que facilitan las costuras entre crecimiento y vivienda semilla, hasta sistemas espaciales que permiten que la casa altere su uso transformándose en un hábitat productivo o en un artefacto de renta. Así como los mecanismos de ampliación están asociados a la morfología, se descubrió que su uso es independiente de la localización, y que las estrategias de adaptabilidad de la vivienda se encuentran ligadas a sistemas constructivos o procesos de gestión vinculados a una región concreta. De esta manera, la combinación de los mecanismos con las estrategias caracterizan el proceso de evolución de la vivienda, vinculándola a unos determinados condicionantes sociales, geográficos y por tanto, constructivos. Finalmente, a través de la adecuada combinación de mecanismos de ampliación y estrategias de adaptabilidad en el proyecto de la vivienda con crecimiento programado es posible optimizar su desarrollo en términos económicos, constructivos, sociales y espaciales. Como resultado, esto ayudaría no sólo a mejorar la vida de los habitantes de la vivienda semilla en términos cualitativos y cuantitativos, sino también a compactar las ciudades mediante sistemas incluyentes, ya que las casas crecederas proporcionan una mayor complejidad de usos y diversidad de relaciones sociales. ABSTRACT The growing house concept -as we currently know it- was used for the first time back in 1932 in the competition Das Wachsende Haus organized by Martin Wagner and Hans Poelzig during the International Exhibition Sonne, Luft und Haus für alle, promoted by Berlin's Tourist Office. In that competition this type of housing was defined as a basic cell or a seed house unit, and depending on the needs and capabilities of the residents it could grow by adding rooms and defining itself as a complete house unit during each growing stage. Many world-top class architects such as Walter Gropius, Bruno Taut, Erich Mendelsohn or Hans Scharoun, were part of this competition exploring a new path in the flexible housing field, the scheduled grownth. From that moment and on, in Europe -and subsequently in the USA and other developed areas- many theorical and pragmatical researchs were directed towards the growing house phenomena, coming from an initial approach related to innovation, spacial and technical innovation. Furthermore -inside the traditional architecture frame in other countries, growing houses were already tested in the XVIII century- mainly due to the size were more affordable in the Real State Market. Since the 30's decade many developing countries had to deal with massive migration movements from the countryside to cities, building large housing developments were -in many cases- formed by growing housing units. In all of these developing countries the growing house approach was drawn from a different perspective than in the developed countries. An economy of means was prioritized, the utilization of low cost construction systems and -in many cases- a guided self-construction was prioritized versus the prefabricated constructions set by specialized technics that were proposed -for instance- in the European cases. To proceed with this research, information from these -and other- housing units was gathered. From then and on different ways to perform the growing actions were identified, according to its relative position from the seed house unit, these ways were named as addition or enlargement mechanisms indifferently utilized without adknowledging the geographic location for each house. The question of why one addition mechanism is preferred over another in any given case became the main target of this Thesis; the ellaboration of an analysis and diagnosis system for the growing house -according to certain parameters- would allow to point out which is the addition or addition process more efficient for a certain family in a particular location. As a starting point the grownth of the housing unit is directly linked to the evolution of the family unit that lives on it, so the house becomes a dynamic habitat. The complexity and the variability of the phenomena was taken into consideration related to a great number of socio-economic factors hardly able to be foreseen ahead on time but easy to be monitored according to certain patterns linked to regulation, population, average savings, etc As a consequence, to design the optimization system for the growing house, evolutionary patterns were utilized. Those patterns far away from the spatial and morphologic concept normally utilized in Architecture by characters like C. Alexander or J. Habraken, started to be understood like a sequence of events on time (spatial events, social events, economic events, legal events, etc) that describes the transformation process and that are particular for each housing unit. Therefore time became something important as another ingredient in the Architectural Project. The before mentioned addition or enlargement mechanisms were identified while building the patterns; these mechanisms were also understood as city's system of compactation through the tridimendional ocupation of space. Studying density, thorough the concepts of comfort and overcrowding, traffic congestion in the city was accepted as a positive value. This way, the possible transformations made by the residents (planned from the begining) about the residencial scenary (seed house), also became tools of the urban project that are a response to site's distinctive features and to the residents with different grownth intensities, activities and density Likewise, during the process of designing the optimization system, strategies for adaptations and transformation of the growing house were detected, in other words, the serial chain of actions directed to modify the house easing its enlargement or addition, and that comprehends from constructive systems on hold -that smooths the costures between grownth and housing seed- to spatial systems that allows that the house modify its utilization, becoming a productive habitat or a rental asset. Because the enlargement mechanisms are linked to the morphology, it was discovered that the use it's not related to the location, and that the adaptation strategies of the houses are linked to constructive systems or management processes linked to a particular area. This way the combination of mechanisms and strategies characterizes the process of housing evolution, linking it to certain social and geographic peculiarities and therefore constructives. At last, through the certain combination of enlargement mechanisms and adaptability strategies in the housing with scheduled grownth project is possible to optimize its development in economic, constructive, social and spatial terms. As a result, this would help not only to improve the life of the seed house residents in qualitative and quantitative terms but also to compact the cities through inclusive systems, given that the growing houses provide a larger complexity of uses and social relations.

A HOMOSSEXUALIDADE DESCONSTRUÍDA EM LEVÍTICO 18,22 e 20,13

Esta pesquisa apresenta uma leitura desconstruída do conceito de homossexualidade, presumidamente, presente em Levítico 18,22 e 20,13. A busca por indícios históricos de relacionamentos homossexuais encontrou evidências claras desse tipo de prática em épocas como o século X a.C. Também, a pesquisa serviu para mostrar até onde e como se encontram temas, títulos e autores que trabalham com a questão da homossexualidade. Os versos analisados são parte de um código de leis chamado Código de Santidade (Levítico 17-26). O lugar histórico da composição do código se encontra, inicialmente, no evento do retorno dos exilados da Babilônia e vai até meados do exercício da influência grega, séculos seguintes. Evidentemente, o período imperial persa ganha destaque na composição do Código de Santidade . Esse momento mostra como foi relevante a idealização deste Código para que a comunidade em Judá não perdesse sua identidade existencial. A análise exegética dos dois versos mostra como o autor(es) de Levítico não se preocupou, nem ao menos mencionou, o relacionamento unissexual em sua totalidade, mas sim proibiu o sexo anal entre dois homens que fosse misturar categorias de gêneros, fosse violentar a autoridade masculina patriarcal e também fosse assemelhar a comunidade, sua cultura e religião com outras culturas e povos vizinhos. O trabalho chega à conclusão hermenêutica que Levítico 18,22 e 20,13 não sabiam nada sobre o relacionamento homossexual moderno e eram completamente silenciosos quanto ao conceito de homossexualidade em Judá no pós-exílio. Assim, a presente pesquisa deseja ser provocação para a discussão da questão na academia e nas comunidades religiosas, pois, conforme exposto não há nada na bíblia hebraica que se possa utilizar para reprimir a livre expressão da relação unissexual moderna

A HOMOSSEXUALIDADE DESCONSTRUÍDA EM LEVÍTICO 18,22 e 20,13

Esta pesquisa apresenta uma leitura desconstruída do conceito de homossexualidade, presumidamente, presente em Levítico 18,22 e 20,13. A busca por indícios históricos de relacionamentos homossexuais encontrou evidências claras desse tipo de prática em épocas como o século X a.C. Também, a pesquisa serviu para mostrar até onde e como se encontram temas, títulos e autores que trabalham com a questão da homossexualidade. Os versos analisados são parte de um código de leis chamado Código de Santidade (Levítico 17-26). O lugar histórico da composição do código se encontra, inicialmente, no evento do retorno dos exilados da Babilônia e vai até meados do exercício da influência grega, séculos seguintes. Evidentemente, o período imperial persa ganha destaque na composição do Código de Santidade . Esse momento mostra como foi relevante a idealização deste Código para que a comunidade em Judá não perdesse sua identidade existencial. A análise exegética dos dois versos mostra como o autor(es) de Levítico não se preocupou, nem ao menos mencionou, o relacionamento unissexual em sua totalidade, mas sim proibiu o sexo anal entre dois homens que fosse misturar categorias de gêneros, fosse violentar a autoridade masculina patriarcal e também fosse assemelhar a comunidade, sua cultura e religião com outras culturas e povos vizinhos. O trabalho chega à conclusão hermenêutica que Levítico 18,22 e 20,13 não sabiam nada sobre o relacionamento homossexual moderno e eram completamente silenciosos quanto ao conceito de homossexualidade em Judá no pós-exílio. Assim, a presente pesquisa deseja ser provocação para a discussão da questão na academia e nas comunidades religiosas, pois, conforme exposto não há nada na bíblia hebraica que se possa utilizar para reprimir a livre expressão da relação unissexual moderna

Limites ao poder de fiscalização nas relações de trabalho

A maioria das demandas envolvendo pedidos de danos morais no judiciário trabalhista brasileiro é originada a partir de abusos patronais cometidos no exercício do poder diretivo, em especial de sua dimensão fiscalizatória. Embora inexista, no Brasil, disciplina normativa específica quanto aos limites à maior parte das manifestações do poder de fiscalização, seu exercício é restringido pela dignidade da pessoa humana, que deve ser compreendida de acordo com a noção de trabalho decente propugnada pela OIT. A dignidade humana constitui cláusula geral de proteção aos direitos da personalidade, dentre eles, os direitos à intimidade e à vida privada, os mais ofendidos por meio da fiscalização patronal abusiva nas fases précontratual, contratual e pós-contratual. Práticas como a revista pessoal nos trabalhadores e em seus pertences, a limitação à utilização de banheiros, a instalação de câmeras e microfones no local de trabalho e o monitoramento dos computadores utilizados na empresa revelam, por vezes, violações a esses direitos. A revista não encontra fundamento no poder de fiscalização e no direito de propriedade do empregador, salvo quando tiver por objetivo a garantia da saúde ou segurança no ambiente laboral. A instalação de equipamentos audiovisuais, quando visar a proteção patrimonial do empregador ou for essencial ao procedimento de gestão, somente pode se dar nos espaços em que o trabalho for efetivamente desenvolvido e por tempo determinado, fundada em situação específica, sendo imprescindível a ciência dos monitorados quanto à instalação e à localização dos equipamentos. A escuta telefônica e o monitoramento de computadores e e-mails somente será possível quando o empregador determinar a utilização dos meios exclusivamente para os fins da prestação laboral, com ciência inequívoca dos trabalhadores, além de disponibilizar ou autorizar a utilização de meios alternativos para a comunicação pessoal. Não devem ser admitidas quaisquer limitações à utilização de banheiros, bem como o estabelecimento de escala de gravidez no âmbito empresarial. Sendo o tomador de serviços legitimado a exercer o poder fiscalizatório sobre a atividade produtiva empreendida no estabelecimento e havendo a indiscutível imperatividade da proteção aos direitos da personalidade obreiros, é necessária a fixação normativa de limites ao poder patronal, em prol do estabelecimento da segurança jurídica. O direito de resistência é contraface do poder diretivo, no sentido de que o uso irregular deste faz nascer aquele e, consequentemente, os limites do poder diretivo condicionam os do ius resistentiae. Os trabalhadores devem exercê-lo com fulcro nos direitos à vida privada, à intimidade, à honra e à dignidade humana. A doutrina deve valer-se da técnica da ponderação para estabelecer os limites ao poder fiscalizatório patronal, com fulcro no princípio da proporcionalidade. A divergência jurisprudencial deve ser minimizada pela atividade criativa dos juízes quanto aos limites ao poder fiscalizatório, consoante o princípio da proporcionalidade, e por meio da utilização de mecanismos específicos voltados à redução da insegurança jurídica no Judiciário Trabalhista, tais como recursos de revista, embargos de divergência, incidentes de uniformização de jurisprudência, súmulas, precedentes normativos e orientações jurisprudenciais. Nada impede, ainda, que limites ao poder fiscalizatório patronal sejam estabelecidos por meio de negociação coletiva.

Discursos sobre os gêneros discursivos: análise dos dizeres de sujeitos-professores do Ensino Fundamental I

Buscamos investigar, neste trabalho, quais são os discursos sobre os gêneros discursivos que circulam entre sujeitos-professores que atuam nos anos finais (4º e 5º anos) do Ensino Fundamental I, em escolas públicas municipais. Buscamos compreender também, a maneira como esses sujeitos (se) significam, em suas relações com a língua e a história. O interesse pela temática investigada se dá, principalmente, porque observamos, ao longo de nossos anos de experiência no magistério, que, embora os gêneros discursivos conforme definidos por Bakhtin (1997) sejam considerados pelos Parâmetros Curriculares Nacionais e por outros documentos legais que fundamentam a Educação Básica, como um dos principais objetivos do ensino de língua portuguesa, o conceito ainda desperta muitas dúvidas nos docentes. Filiamo-nos à Análise de Discurso de matriz francesa, postulada por Pêcheux (2009), área do conhecimento basicamente constituída na intersecção entre o materialismo histórico, a psicanálise e a linguística, e que considera a língua como lugar de materialização do discurso que é a língua em movimento, em uso pelos sujeitos. Na construção de nosso referencial teórico, mobilizamos, ainda, a teoria bakhtiniana dos gêneros do discurso, e as contribuições de teóricos das ciências da educação, tais como Pimenta (2012), Tardif (2002), Giroux (1997), Sacristán (1998), entre outros. O corpus da pesquisa é representado por seis entrevistas semiestruturadas, realizadas com sujeitos-professores que atuam em classes de 4º e 5º ano do ensino fundamental, em escolas de rede pública municipal. A partir da transcrição das entrevistas, foram realizados recortes que constituíram o material analisado neste estudo. As análises realizadas aqui indiciam que os sujeitos-professores entrevistados circulam por formações discursivas e ideológicas cristalizadas, no que diz respeito à relação dos estudantes com a língua. Tais docentes buscam desenvolver um trabalho pedagógico mediado pelos critérios de suposta familiaridade, utilidade ou praticidade em relação aos usos sociais que os gêneros discursivos poderiam ter para os estudantes. Além disso, as análises discursivas de alguns recortes apontam para um equívoco na compreensão do conceito bakhtiniano de gêneros discursivos, compreendidos, no cotidiano escolar, como uma classificação tipológica e estanque, excluindo a dinamicidade e a plasticidade que envolvem o conceito, conforme proposto por Bakhtin (1997). A cristalização da definição do conceito de gêneros discursivos, na dimensão tipológica, favorece o cerceamento da prática pedagógica, colaborando para a difusão de práticas que visam o esgotamento dos gêneros discursivos, buscando apresentar o maior número possível de gêneros aos estudantes, sob a forma de modelos que deverão ser seguidos em suas produções textuais futuras, e que lhes serão cobrados em avaliações internas e externas.

An Introduction to Conservation Easements in the United States: A Simple Concept and a Complicated Mosaic of Law

The idea of a conservation easement – restrictions on the development and use of land designed to protect the land’s conservation or historic values – can be relatively easily understood. More significant and more challenging is the complex body of state and federal laws that shapes the creation, funding, tax treatment, enforcement, modification, and termination of conservation easements. The explosion in the number of conservation easements over the past four decades has made them one of the most popular land protection mechanisms in the United States. The National Conservation Easement Database estimates that the total number of acres encumbered by conservation easements exceeds 40 million.Because conservation easements are both novel and ubiquitous, understanding how they actual work is essential for practicing lawyers, policymakers, land trust professionals, and students of conservation. This article provides a “quick tour” through some of the most important aspects of the developing mosaic of conservation easement law. It gives the reader a sense of the complex inter-jurisdictional dynamics that shape conservation transactions and disputes about conservation easements. Professors of property law, environmental law, tax law, and environmental studies who wish to cover conservation easements in the context of a more general course can use the article to provide their students with a broad but comprehensive overview of the relevant legal and policy issues.

Handling of Uncertainty in Life Cycle Inventory by Correlated Multivariate Lognormal Distributions: Application to the Design of Supply Chain Networks

Poster presented in the 24th European Symposium on Computer Aided Process Engineering (ESCAPE 24), Budapest, Hungary, June 15-18, 2014.

Handling of Uncertainty in Life Cycle Inventory by Correlated Multivariate Lognormal Distributions: Application to the Design of Supply Chain Networks

In this work, we analyze the effect of incorporating life cycle inventory (LCI) uncertainty on the multi-objective optimization of chemical supply chains (SC) considering simultaneously their economic and environmental performance. To this end, we present a stochastic multi-scenario mixed-integer linear programming (MILP) coupled with a two-step transformation scenario generation algorithm with the unique feature of providing scenarios where the LCI random variables are correlated and each one of them has the desired lognormal marginal distribution. The environmental performance is quantified following life cycle assessment (LCA) principles, which are represented in the model formulation through standard algebraic equations. The capabilities of our approach are illustrated through a case study of a petrochemical supply chain. We show that the stochastic solution improves the economic performance of the SC in comparison with the deterministic one at any level of the environmental impact, and moreover the correlation among environmental burdens provides more realistic scenarios for the decision making process.