Analysis of joint laxity after total ankle arthroplasty: cadaver study.

BACKGROUND: Clinical results of total ankle arthroplasty with early designs were disappointing. Recently-developed ankle prostheses have good mid-term results; however, limited information is available regarding effects of total ankle arthroplasty on ankle laxity. METHODS: Eight cadaveric lower extremities were tested with a custom device which enabled measurement of multi-axial forces, moments, and displacement during applied axial, shear, and rotational loading. Tests consisted of anterior-posterior and medial-lateral translation and internal-external rotation of the talus relative to the tibia during axial loads on the tibia simulating body weight (700 N) and an unloaded condition (5 N). Tests were performed in neutral, dorsiflexion, and plantarflexion. Laxity was determined for the intact ankle, and following insertion of an unconstrained total ankle implant, comparing load-displacement curve. FINDINGS: Laxity after total ankle arthroplasty did not approximate the normal ankle in most conditions tested. Displacement was significantly greater for total ankle arthroplasty in both posterior and lateral translation, and internal rotation, with 5 N axial loading, and anterior-posterior, medial-lateral translation, and internal-external rotation for 700 N axial loading. For the 700 N axial load condition, in the neutral ankle position, total anterior-posterior translation averaged 0.4 mm (SD 0.2 mm), but 6.0 mm (SD 1.5 mm) after total ankle arthroplasty (P<0.01). This study demonstrated more laxity in the replaced ankle than normal ankle for both unloaded and 700 N axially loaded conditions. INTERPRETATION: These data indicate the increased responsibility of the ligaments for ankle laxity after total ankle arthroplasty and suggest the importance of meticulous ligament reconstruction with total ankle arthroplasty operations.

Joint Official Positions of the International Society for Clinical Densitometry and International Osteoporosis Foundation on FRAX(®). Executive Summary of the 2010 Position Development Conference on Interpretation and use of FRAX® in clinical practice.

The International Society for Clinical Densitometry (ISCD) and the International Osteoporosis Foundation (IOF) convened the FRAX(®) Position Development Conference (PDC) in Bucharest, Romania, on November 14, 2010, following a two-day joint meeting of the ISCD and IOF on the "Interpretation and Use of FRAX(®) in Clinical Practice." These three days of critical discussion and debate, led by a panel of international experts from the ISCD, IOF and dedicated task forces, have clarified a number of important issues pertaining to the interpretation and implementation of FRAX(®) in clinical practice. The Official Positions resulting from the PDC are intended to enhance the quality and clinical utility of fracture risk assessment worldwide. Since the field of skeletal assessment is still evolving rapidly, some clinically important issues addressed at the PDCs are not associated with robust medical evidence. Accordingly, some Official Positions are based largely on expert opinion. Despite limitations inherent in such a process, the ISCD and IOF believe it is important to provide clinicians and technologists with the best distillation of current knowledge in the discipline of bone densitometry and provide an important focus for the scientific community to consider. This report describes the methodology and results of the ISCD-IOF PDC dedicated to FRAX(®).

Audit report on the Iowa Water Pollution Control Works Financing Program and the Iowa Drinking Water Facilities Financing Program, joint programs of the Iowa Finance Authority and the Iowa Department of Natural Resources for the year ended June 30, 2012

Audit report on the Iowa Water Pollution Control Works Financing Program and the Iowa Drinking Water Facilities Financing Program, joint programs of the Iowa Finance Authority and the Iowa Department of Natural Resources for the year ended June 30, 2012

Joint Enrollment 2012

This report summarizes joint enrollment in Iowa's community colleges. Jointly enrolled students are high school students enrolled in community college credit coursework. This report contains fiscal year data for the state's 15 community colleges reported through the Community College Management Information System (MIS) and confirmed by each college.

The role of the vacuolar H+ - ATPase in membrane fusion

RésuméLa H+-ATPase vacuolaire (V-ATPase) est un complexe enzymatique composé de deux secteurs multimériques (VQ et Vi) dont l'association dans la cellule est réversible. Le secteur intramembranaire de la V-ATPase (V0) interagit physiquement avec des protéines SNARE et stimule la fusion homotypique des vacuoles de la levure (lysosomes), la sécrétion de neurotransmetteurs et d'insuline, la fusion entre phagosome et lysosome ainsi que la sécrétion des corps multivésiculaires par un mécanisme inconnu. Dans cette étude j'ai identifié des résidues d'acides amines situés dans des sous-unités de V0 impliqués dans le mécanisme de fusion des vacuoles mais non essentiels pour l'acidification vacuolaire par la V-ATPase. j'ai utilisé un protocole de mutagenèse aléatoire pour produire des libraries de mutants des sous unités de V0. Ces libraries ont été analysées in vivo afin d'identifier des alleles qui permettent la translocation des protons mais produisent une vacuole fragmentée, phénotype indiquant un défaut dans la fusion membranaire. Les vacuoles des mutants ont été isolées et caractéisées en utilisant une grande variété d'outils biochimiques pour déterminer précisément l'impact des différentes mutations sur l'accomplissement d'événements clés du processus de fusion.J'ai identifié des mutations associées à des défauts spécifiques de la fusion dans plusieurs sous-unités de V0. Dans les protéolipides c, c' et c" ces mutations se concentrent dans la partie cytosolique des domaines transmembranaires. Elles renforcent les associations entre les secteurs de la V-ATPase et entre V0 et les SNAREs. Dans la fusion vacuolaire ces mutations permettent la formation de complexes SNAREs en trans mais inhibent l'induction de la fusion. Par contre, la deletion de la sous- unité d influence les étapes de la fusion qui précèdent la formation des complexes trans-SNAREs. Mes résultats démontrent que V0 joue des rôles différents dans plusieurs étapes de la fusion et que ces fonctions sont liées au système des SNAREs. Ils différencient génétiquement les activités de V0 dans la translocation des protons et dans la fusion et identifient de nombreux résidus importants pour la fusion vacuolaire. De plus, compte tenu de la grande conservation de sequence des protéolipides chez les eukaryotes les mutations identifiées dans cette l'étude apportent de nouvelles informations pour analyser la fonction de V0 dans des organismes multicellulaires pour lesquels la function catalytique de la V-ATPase est essentielle à la survie.Résumé pour le large publicLe transport de protéines et de membranes est important pour maintenir la fonction des organelles dans la cellule. Il s'excerce au niveau des vesicules. La fusion membranaire est un processus élémentaire de ce transport. Pour fusionner deux membranes, il faut la coordination de deux activités: le rapprochement et la déstabiiization des deux membranes. La collaboration d'un ensemble de proteins conservés chez les eukaryotes, est nécessaire pour catalyser ces activités. Les proteins SNAREs sont les protagonistes principaux dans la fusion membranaire. Néanmoins, d'autres protéines, comme des Rab-GTPases et des chaperonnes, sont nécessaires pour permettre ce phénomène de fusion. Toutes ces protéines sont temporairement associées avec les SNAREs et leur fonction dans la fusion membranaire est souvent directement liée à leur activité dans cette association. Le secteur transmembranaire V0 de la V-ATPase rnteragit avec des SNAREs et est essentiel pour la fusion dans une variété de systèmes modèles comme la mouche, la souris et la levure. Le secteur V0 est composé de six protéines différentes. Avec te secteur Va, qui réside dans le cytosol, il forme la V-ATPase dont la fonction principale est l'acidification des organelles par translocation des protons à travers la membrane par un mécanisme ressemblant à celui d'une pompe. V0joue un role dans la fusion membranaire, indépendamment de son activité catalytique liée au pompage des protons, et ce rôle est encore largement méconnu à ce jour. Le but de ma thèse était de mieux comprendre l'implication de V0 dans ce contexte.Pour étudier des activités liées à la V-ATPase, la levure est un excellent modèle d'étude car elle survie à une inactivation de l'enzyme alors que le meme traitement serait léthal pour des organismes multicellulaires. Dans ma thèse j'ai utilisé la fusion homotypique de la vacuole de levure comme système modèle pour étudier le rôle de V0 dans la fusion. J'ai muté des gènes qui encodent des sous- unités de V0 et les ai introduit dans des souches privées des gènes respectifs. Dans les librairies de souches portant différentes versions de ces gènes j'ai cherché des clones exprimant une V-ATPase intacte et fonctionnelle mais qui possèdent une vacuole fragmentée. Le plus souvent, une vacuole fragmentée indique un défaut dans la fusion vacuolaire. Dans les trois types de protéolipides qui composent un cylindre dans le secteur V0, j'ai trouvé des clones avec une vacuole fragmentée. Après avoir isolé les mutations responsable de ce type de morphologie vacuolaire, j'ai isolé les vacuoles de ces clones pour étudier leur activités dans différentes étapes de la fusion vacuolaire. Les résultats de ces analyses mettent en évidence une implication de V0 dans plusieurs étapes de la fusion vacuolaire. Certaines mutations sélectionnées dans mon étude inhibent une étape précoce de la fusion qui inclue la dissociation des complexes SNARE, tandis que d'autres mutations inhibent une étape tardive du processus de fusion qui inclue la transmission d'une force disruptive dans la membrane.AbstractThe membrane-integral V0 sector of the vacuolar H+-ATPase (V-ATPase) interacts with SNARE proteins. V0 stimulates fusion between yeast vacuoles (lysosomes) (Peters et al., 2001b), secretion of neurotransmitters and insulin (Hiesinger et al., 2005a, Sun-Wada et al., 2006a), phagosome-lysosome fusion (Peri and Nusslein-Volhard, 2008) and secretion of multivesicular bodies (Liegeois et al., 2006b) by a yet unknown mechanism. In my thesis, I identified sites in V0 subunits that are involved in yeast vacuole fusion but dispensable for the proton pumping by the V-ATPase. I randomly mutagenized V0 subunits and screened in vivo for mutant alleles that support proton pumping but cause fragmented vacuoles, a phenotype indicative of a fusion defect. Mutant vacuoles were isolated and analyzed in a cell-free system, allowing assay of key events in fusion, such as trans-SNARE pairing, lipid transition and fusion pore opening (Reese et al., 2005b).Mutants with selective fusion defects were found in several V0 subunits. In the proteolipids c, c' and c", critical mutations are concentated in the cytosolic half of the transmembrane domains. These mutations rendered the V-ATPase holoenzyme more stable and modulated V0-SNARE associations. In vacuole fusion critical proteolipid mutations permitted trans-SNARE pairing but impeded the induction of lipid flow between the membranes. Deletion of subunit d, by contrast, influenced early stages of fusion that precede trans-SNARE pairing. My results show that V0 acts in several steps of the fusion process and that its function is intimately connected to the SNARE system. They genetically separate the proton pump and fusion activities of V0 and identify numerous critical residues. Given the high sequence conservation of proteolipids in eukaryotic life, the identified mutations may be helpful in analyzing the fusion function of V0 also in mammalian cells, where V- ATPase pump function is essential for survival.

Mutual control of membrane fission and fusion proteins.

Membrane fusion and fission are antagonistic reactions controlled by different proteins. Dynamins promote membrane fission by GTP-driven changes of conformation and polymerization state, while SNAREs fuse membranes by forming complexes between t- and v-SNAREs from apposed vesicles. Here, we describe a role of the dynamin-like GTPase Vps1p in fusion of yeast vacuoles. Vps1p forms polymers that couple several t-SNAREs together. At the onset of fusion, the SNARE-activating ATPase Sec18p/NSF and the t-SNARE depolymerize Vps1p and release it from the membrane. This activity is independent of the SNARE coactivator Sec17p/alpha-SNAP and of the v-SNARE. Vps1p release liberates the t-SNAREs for initiating fusion and at the same time disrupts fission activity. We propose that reciprocal control between fusion and fission components exists, which may prevent futile cycles of fission and fusion.

Mechanism of reduction of virus release and cell-cell fusion in persistent canine distemper virus infection.

Canine distemper virus (CDV), a mobillivirus related to measles virus causes a chronic progressive demyelinating disease, associated with persistence of the virus in the central nervous system (CNS). CNS persistence of morbilliviruses has been associated with cell-to-cell spread, thereby limiting immune detection. The mechanism of cell-to-cell spread remains uncertain. In the present study we studied viral spread comparing a cytolytic (non-persistent) and a persistent CDV strain in cell cultures. Cytolytic CDV spread in a compact concentric manner with extensive cell fusion and destruction of the monolayer. Persistent CDV exhibited a heterogeneous cell-to-cell pattern of spread without cell fusion and 100-fold reduction of infectious viral titers in supernatants as compared to the cytolytic strain. Ultrastructurally, low infectious titers correlated with limited budding of persistent CDV as compared to the cytolytic strain, which shed large numbers of viral particles. The pattern of heterogeneous cell-to-cell viral spread can be explained by low production of infectious viral particles in only few areas of the cell membrane. In this way persistent CDV only spreads to a small proportion of the cells surrounding an infected one. Our studies suggest that both cell-to-cell spread and limited production of infectious virus are related to reduced expression of fusogenic complexes in the cell membrane. Such complexes consist of a synergistic configuration of the attachment (H) and fusion (F) proteins on the cell surface. F und H proteins exhibited a marked degree of colocalization in cytolytic CDV infection but not in persistent CDV as seen by confocal laser microscopy. In addition, analysis of CDV F protein expression using vaccinia constructs of both strains revealed an additional large fraction of uncleaved fusion protein in the persistent strain. This suggests that the paucity of active fusion complexes is due to restricted intracellular processing of the viral fusion protein.

Quality Control/Quality Assurance Testing for Joint Density and Segregation of Asphalt Mixtures, TR-623, 2013

Longitudinal joint quality control/assurance is essential to the successful performance of asphalt pavements and it has received considerable amount of attention in recent years. The purpose of the study is to evaluate the level of compaction at the longitudinal joint and determine the effect of segregation on the longitudinal joint performance. Five paving projects with the use of traditional butt joint, infrared joint heater, edge restraint by milling and modified butt joint with the hot pinch longitudinal joint construction techniques were selected in this study. For each project, field density and permeability tests were made and cores from the pavement were obtained for in-lab permeability, air void and indirect tensile strength. Asphalt content and gradations were also obtained to determine the joint segregation. In general, this study finds that the minimum required joint density should be around 90.0% of the theoretical maximum density based on the AASHTO T166 method. The restrained-edge by milling and butt joint with the infrared heat treatment construction methods both create the joint density higher than this 90.0% limit. Traditional butt joint exhibits lower density and higher permeability than the criterion. In addition, all of the projects appear to have segregation at the longitudinal joint except for the edge-restraint by milling method.

Cointegrase, a naturally occurring, truncated form of IS21 transposase, catalyzes replicon fusion rather than simple insertion of IS21.

The bacterial insertion sequence IS21 contains two genes, istA and istB, which are organized as an operon. IS21 spontaneously forms tandem repeats designated (IS21)2. Plasmids carrying (IS21)2 react efficiently with other replicons, producing cointegrates via a cut-and-paste mechanism. Here we show that transposition of a single IS21 element (simple insertion) and cointegrate formation involving (IS21)2 result from two distinct non-replicative pathways, which are essentially due to two differentiated IstA proteins, transposase and cointegrase. In Escherichia coli, transposase was characterized as the full-length, 46 kDa product of the istA gene, whereas the 45 kDa cointegrase was expressed, in-frame, from a natural internal translation start of istA. The istB gene, which could be experimentally disconnected from istA, provided a helper protein that strongly stimulated the transposase and cointegrase-driven reactions. Site-directed mutagenesis was used to express either cointegrase or transposase from the istA gene. Cointegrase promoted replicon fusion at high frequencies by acting on IS21 ends which were linked by 2, 3, or 4 bp junction sequences in (IS21)2. By contrast, cointegrase poorly catalyzed simple insertion of IS21 elements. Transposase had intermediate, uniform activity in both pathways. The ability of transposase to synapse two widely spaced IS21 ends may reside in the eight N-terminal amino acid residues which are absent from cointegrase. Given the 2 or 3 bp spacing in naturally occurring IS21 tandems and the specialization of cointegrase, the fulminant spread of IS21 via cointegration can now be understood.

FRAX(®) Bone Mineral Density Task Force of the 2010 Joint International Society for Clinical Densitometry International Osteoporosis Foundation Position Development Conference.

FRAX(®) is a fracture risk assessment algorithm developed by the World Health Organization in cooperation with other medical organizations and societies. Using easily available clinical information and femoral neck bone mineral density (BMD) measured by dual-energy X-ray absorptiometry (DXA), when available, FRAX(®) is used to predict the 10-year probability of hip fracture and major osteoporotic fracture. These values may be included in country specific guidelines to aid clinicians in determining when fracture risk is sufficiently high that the patient is likely to benefit from pharmacological therapy to reduce that risk. Since the introduction of FRAX(®) into clinical practice, many practical clinical questions have arisen regarding its use. To address such questions, the International Society for Clinical Densitometry (ISCD) and International Osteoporosis Foundations (IOF) assigned task forces to review the best available medical evidence and make recommendations for optimal use of FRAX(®) in clinical practice. Questions were identified and divided into three general categories. A task force was assigned to investigating the medical evidence in each category and developing clinically useful recommendations. The BMD Task Force addressed issues that included the potential use of skeletal sites other than the femoral neck, the use of technologies other than DXA, and the deletion or addition of clinical data for FRAX(®) input. The evidence and recommendations were presented to a panel of experts at the ISCD-IOF FRAX(®) Position Development Conference, resulting in the development of ISCD-IOF Official Positions addressing FRAX(®)-related issues.

Zonation for 3D aquifer characterization based on joint inversions of multimethod crosshole geophysical data

Predictive groundwater modeling requires accurate information about aquifer characteristics. Geophysical imaging is a powerful tool for delineating aquifer properties at an appropriate scale and resolution, but it suffers from problems of ambiguity. One way to overcome such limitations is to adopt a simultaneous multitechnique inversion strategy. We have developed a methodology for aquifer characterization based on structural joint inversion of multiple geophysical data sets followed by clustering to form zones and subsequent inversion for zonal parameters. Joint inversions based on cross-gradient structural constraints require less restrictive assumptions than, say, applying predefined petro-physical relationships and generally yield superior results. This approach has, for the first time, been applied to three geophysical data types in three dimensions. A classification scheme using maximum likelihood estimation is used to determine the parameters of a Gaussian mixture model that defines zonal geometries from joint-inversion tomograms. The resulting zones are used to estimate representative geophysical parameters of each zone, which are then used for field-scale petrophysical analysis. A synthetic study demonstrated how joint inversion of seismic and radar traveltimes and electrical resistance tomography (ERT) data greatly reduces misclassification of zones (down from 21.3% to 3.7%) and improves the accuracy of retrieved zonal parameters (from 1.8% to 0.3%) compared to individual inversions. We applied our scheme to a data set collected in northeastern Switzerland to delineate lithologic subunits within a gravel aquifer. The inversion models resolve three principal subhorizontal units along with some important 3D heterogeneity. Petro-physical analysis of the zonal parameters indicated approximately 30% variation in porosity within the gravel aquifer and an increasing fraction of finer sediments with depth.

Supporting interdisciplinary case studies: development and implementation of a joint learning environment for students in forensic science and criminal law

Scientific reporting and communication is a challenging topic for which traditional study programs do not offer structured learning activities on a regular basis. This paper reports on the development and implementation of a web application and associated learning activities that intend to raise the awareness of reporting and communication issues among students in forensic science and law. The project covers interdisciplinary case studies based on a library of written reports about forensic examinations. Special features of the web framework, in particular a report annotation tool, support the design of various individual and group learning activities that focus on the development of knowledge and competence in dealing with reporting and communication challenges in the students' future areas of professional activity.

Measurement of multi-segment foot joint angles during gait using a wearable system.

Usually the measurement of multi-segment foot and ankle complex kinematics is done with stationary motion capture devices which are limited to use in a gait laboratory. This study aimed to propose and validate a wearable system to measure the foot and ankle complex joint angles during gait in daily conditions, and then to investigate its suitability for clinical evaluations. The foot and ankle complex consisted of four segments (shank, hindfoot, forefoot, and toes), with an inertial measurement unit (3D gyroscopes and 3D accelerometers) attached to each segment. The angles between the four segments were calculated in the sagittal, coronal, and transverse planes using a new algorithm combining strap-down integration and detection of low-acceleration instants. To validate the joint angles measured by the wearable system, three subjects walked on a treadmill for five minutes at three different speeds. A camera-based stationary system that used a cluster of markers on each segment was used as a reference. To test the suitability of the system for clinical evaluation, the joint angle ranges were compared between a group of 10 healthy subjects and a group of 12 patients with ankle osteoarthritis, during two 50-m walking trials where the wearable system was attached to each subject. On average, over all joints and walking speeds, the RMS differences and correlation coefficients between the angular curves obtained using the wearable system and the stationary system were 1 deg and 0.93, respectively. Moreover, this system was able to detect significant alteration of foot and ankle function between the group of patients with ankle osteoarthritis and the group of healthy subjects. In conclusion, this wearable system was accurate and suitable for clinical evaluation when used to measure the multi-segment foot and ankle complex kinematics during long-distance walks in daily life conditions.