Automated Traffic/Truck Weight Monitoring Equipment (Weigh-in-Motion), HR-282, 1988

This report documents work undertaken in the demonstration of a low-cost Automatic Weight and Classification System (AWACS). An AWACS procurement specification and details of the results of the project are also included. The intent of the project is to support and encourage transferring research knowledge to state and local agencies and manufacturers through field demonstrations. Presently available, Weigh-in-Motion and Classification Systems are typically too expensive to permit the wide deployment necessary to obtain representative vehicle data. Piezo electric technology has been used in the United Kingdom and Europe and is believed to be the basic element in a low-cost AWACS. Low-cost systems have been installed at two sites, one in Portland Cement Concrete (PCC) pavement in Iowa and the other in Asphaltic Cement Concrete (ACC) pavement in Minnesota to provide experience with both types of pavement. The systems provide axle weights, gross vehicle weight, axle spacing, vehicle classification, vehicle speed, vehicle count, and time of arrival. In addition, system self-calibration and a method to predict contact tire pressure is included in the system design. The study has shown that in the PCC pavement, the AWACS is capable of meeting the needs of state and federal highway agencies, producing accuracies comparable to many current commercial WIM devices. This is being achieved at a procurement cost of substantially less than currently available equipment. In the ACC pavement the accuracies were less than those observed in the PCC pavement which is concluded to result from a low pavement rigidity at this site. Further work is needed to assess the AWACS performance at a range of sites in ACC pavements.

Wireless Sensor Networks for Infrastructure Monitoring, TR-611, 2010

A good system of preventive bridge maintenance enhances the ability of engineers to manage and monitor bridge conditions, and take proper action at the right time. Traditionally infrastructure inspection is performed via infrequent periodical visual inspection in the field. Wireless sensor technology provides an alternative cost-effective approach for constant monitoring of infrastructures. Scientific data-acquisition systems make reliable structural measurements, even in inaccessible and harsh environments by using wireless sensors. With advances in sensor technology and availability of low cost integrated circuits, a wireless monitoring sensor network has been considered to be the new generation technology for structural health monitoring. The main goal of this project was to implement a wireless sensor network for monitoring the behavior and integrity of highway bridges. At the core of the system is a low-cost, low power wireless strain sensor node whose hardware design is optimized for structural monitoring applications. The key components of the systems are the control unit, sensors, software and communication capability. The extensive information developed for each of these areas has been used to design the system. The performance and reliability of the proposed wireless monitoring system is validated on a 34 feet span composite beam in slab bridge in Black Hawk County, Iowa. The micro strain data is successfully extracted from output-only response collected by the wireless monitoring system. The energy efficiency of the system was investigated to estimate the battery lifetime of the wireless sensor nodes. This report also documents system design, the method used for data acquisition, and system validation and field testing. Recommendations on further implementation of wireless sensor networks for long term monitoring are provided.

How to redesign a virtual library website: a case study

This abstract presents how we redesigned, with user-centred design methods, the way we organize and present the content on the UOC Virtual Library website. The content is now offered in a way that is more intuitive, usable and easy to understand, based on criteria of customization, transparency and proximity.The techniques used to achieve these objectives included benchmarking, interviews and focus groups during the user requirement capture phase and user tests to assess the process and results.

Tapping the innovation potential of corporate engagement with stakeholders

Summary This dissertation explores how stakeholder dialogue influences corporate processes, and speculates about the potential of this phenomenon - particularly with actors, like non-governmental organizations (NGOs) and other representatives of civil society, which have received growing attention against a backdrop of increasing globalisation and which have often been cast in an adversarial light by firms - as a source of teaming and a spark for innovation in the firm. The study is set within the context of the introduction of genetically-modified organisms (GMOs) in Europe. Its significance lies in the fact that scientific developments and new technologies are being generated at an unprecedented rate in an era where civil society is becoming more informed, more reflexive, and more active in facilitating or blocking such new developments, which could have the potential to trigger widespread changes in economies, attitudes, and lifestyles, and address global problems like poverty, hunger, climate change, and environmental degradation. In the 1990s, companies using biotechnology to develop and offer novel products began to experience increasing pressure from civil society to disclose information about the risks associated with the use of biotechnology and GMOs, in particular. Although no harmful effects for humans or the environment have been factually demonstrated even to date (2008), this technology remains highly-contested and its introduction in Europe catalysed major companies to invest significant financial and human resources in stakeholder dialogue. A relatively new phenomenon at the time, with little theoretical backing, dialogue was seen to reflect a move towards greater engagement with stakeholders, commonly defined as those "individuals or groups with which. business interacts who have a 'stake', or vested interest in the firm" (Carroll, 1993:22) with whom firms are seen to be inextricably embedded (Andriof & Waddock, 2002). Regarding the organisation of this dissertation, Chapter 1 (Introduction) describes the context of the study, elaborates its significance for academics and business practitioners as an empirical work embedded in a sector at the heart of the debate on corporate social responsibility (CSR). Chapter 2 (Literature Review) traces the roots and evolution of CSR, drawing on Stakeholder Theory, Institutional Theory, Resource Dependence Theory, and Organisational Learning to establish what has already been developed in the literature regarding the stakeholder concept, motivations for engagement with stakeholders, the corporate response to external constituencies, and outcomes for the firm in terms of organisational learning and change. I used this review of the literature to guide my inquiry and to develop the key constructs through which I viewed the empirical data that was gathered. In this respect, concepts related to how the firm views itself (as a victim, follower, leader), how stakeholders are viewed (as a source of pressure and/or threat; as an asset: current and future), corporate responses (in the form of buffering, bridging, boundary redefinition), and types of organisational teaming (single-loop, double-loop, triple-loop) and change (first order, second order, third order) were particularly important in building the key constructs of the conceptual model that emerged from the analysis of the data. Chapter 3 (Methodology) describes the methodology that was used to conduct the study, affirms the appropriateness of the case study method in addressing the research question, and describes the procedures for collecting and analysing the data. Data collection took place in two phases -extending from August 1999 to October 2000, and from May to December 2001, which functioned as `snapshots' in time of the three companies under study. The data was systematically analysed and coded using ATLAS/ti, a qualitative data analysis tool, which enabled me to sort, organise, and reduce the data into a manageable form. Chapter 4 (Data Analysis) contains the three cases that were developed (anonymised as Pioneer, Helvetica, and Viking). Each case is presented in its entirety (constituting a `within case' analysis), followed by a 'cross-case' analysis, backed up by extensive verbatim evidence. Chapter 5 presents the research findings, outlines the study's limitations, describes managerial implications, and offers suggestions for where more research could elaborate the conceptual model developed through this study, as well as suggestions for additional research in areas where managerial implications were outlined. References and Appendices are included at the end. This dissertation results in the construction and description of a conceptual model, grounded in the empirical data and tied to existing literature, which portrays a set of elements and relationships deemed important for understanding the impact of stakeholder engagement for firms in terms of organisational learning and change. This model suggests that corporate perceptions about the nature of stakeholder influence the perceived value of stakeholder contributions. When stakeholders are primarily viewed as a source of pressure or threat, firms tend to adopt a reactive/defensive posture in an effort to manage stakeholders and protect the firm from sources of outside pressure -behaviour consistent with Resource Dependence Theory, which suggests that firms try to get control over extemal threats by focussing on the relevant stakeholders on whom they depend for critical resources, and try to reverse the control potentially exerted by extemal constituencies by trying to influence and manipulate these valuable stakeholders. In situations where stakeholders are viewed as a current strategic asset, firms tend to adopt a proactive/offensive posture in an effort to tap stakeholder contributions and connect the organisation to its environment - behaviour consistent with Institutional Theory, which suggests that firms try to ensure the continuing license to operate by internalising external expectations. In instances where stakeholders are viewed as a source of future value, firms tend to adopt an interactive/innovative posture in an effort to reduce or widen the embedded system and bring stakeholders into systems of innovation and feedback -behaviour consistent with the literature on Organisational Learning, which suggests that firms can learn how to optimize their performance as they develop systems and structures that are more adaptable and responsive to change The conceptual model moreover suggests that the perceived value of stakeholder contribution drives corporate aims for engagement, which can be usefully categorised as dialogue intentions spanning a continuum running from low-level to high-level to very-high level. This study suggests that activities aimed at disarming critical stakeholders (`manipulation') providing guidance and correcting misinformation (`education'), being transparent about corporate activities and policies (`information'), alleviating stakeholder concerns (`placation'), and accessing stakeholder opinion ('consultation') represent low-level dialogue intentions and are experienced by stakeholders as asymmetrical, persuasive, compliance-gaining activities that are not in line with `true' dialogue. This study also finds evidence that activities aimed at redistributing power ('partnership'), involving stakeholders in internal corporate processes (`participation'), and demonstrating corporate responsibility (`stewardship') reflect high-level dialogue intentions. This study additionally finds evidence that building and sustaining high-quality, trusted relationships which can meaningfully influence organisational policies incline a firm towards the type of interactive, proactive processes that underpin the development of sustainable corporate strategies. Dialogue intentions are related to type of corporate response: low-level intentions can lead to buffering strategies; high-level intentions can underpin bridging strategies; very high-level intentions can incline a firm towards boundary redefinition. The nature of corporate response (which encapsulates a firm's posture towards stakeholders, demonstrated by the level of dialogue intention and the firm's strategy for dealing with stakeholders) favours the type of learning and change experienced by the organisation. This study indicates that buffering strategies, where the firm attempts to protect itself against external influences and cant' out its existing strategy, typically lead to single-loop learning, whereby the firm teams how to perform better within its existing paradigm and at most, improves the performance of the established system - an outcome associated with first-order change. Bridging responses, where the firm adapts organisational activities to meet external expectations, typically leads a firm to acquire new behavioural capacities characteristic of double-loop learning, whereby insights and understanding are uncovered that are fundamentally different from existing knowledge and where stakeholders are brought into problem-solving conversations that enable them to influence corporate decision-making to address shortcomings in the system - an outcome associated with second-order change. Boundary redefinition suggests that the firm engages in triple-loop learning, where the firm changes relations with stakeholders in profound ways, considers problems from a whole-system perspective, examining the deep structures that sustain the system, producing innovation to address chronic problems and develop new opportunities - an outcome associated with third-order change. This study supports earlier theoretical and empirical studies {e.g. Weick's (1979, 1985) work on self-enactment; Maitlis & Lawrence's (2007) and Maitlis' (2005) work and Weick et al's (2005) work on sensegiving and sensemaking in organisations; Brickson's (2005, 2007) and Scott & Lane's (2000) work on organisational identity orientation}, which indicate that corporate self-perception is a key underlying factor driving the dynamics of organisational teaming and change. Such theorizing has important implications for managerial practice; namely, that a company which perceives itself as a 'victim' may be highly inclined to view stakeholders as a source of negative influence, and would therefore be potentially unable to benefit from the positive influence of engagement. Such a selfperception can blind the firm from seeing stakeholders in a more positive, contributing light, which suggests that such firms may not be inclined to embrace external sources of innovation and teaming, as they are focussed on protecting the firm against disturbing environmental influences (through buffering), and remain more likely to perform better within an existing paradigm (single-loop teaming). By contrast, a company that perceives itself as a 'leader' may be highly inclined to view stakeholders as a source of positive influence. On the downside, such a firm might have difficulty distinguishing when stakeholder contributions are less pertinent as it is deliberately more open to elements in operating environment (including stakeholders) as potential sources of learning and change, as the firm is oriented towards creating space for fundamental change (through boundary redefinition), opening issues to entirely new ways of thinking and addressing issues from whole-system perspective. A significant implication of this study is that potentially only those companies who see themselves as a leader are ultimately able to tap the innovation potential of stakeholder dialogue.

Vaneri- ja kertopuutehtaiden kuivatuskoneiden lämmöntalteenottojen järjestelmäselvitys

Vanerin tai kertopuun valmistusprosessissaviilun kuivaukseen käytetään suurin osa koko valmistusprosessin primäärienergiasta. Viilunkuivauskoneessa viilun sisältämä vesi siirretään tyypillisesti prosessihöyryllä lämmitettyyn viilunkuivaajan kiertoilmaan höyrystämällä ja poistetaanviilunkuivaajasta poistoilman mukana. Viilunkuivaajan poistoilma on lämmintä jaerittäin suuren kosteuspitoisuutensa takia sisältää runsaasti energiaa. Tyypillisellä viilunkuivaajalla poistoilmaan sitoutunut lämpöteho vaihtelee prosessiolosuhteista riippuen välillä 2,7-5,7 MW. Diplomityössä tutkittiin viilunkuivaajan poistoilman sisältämän lämmön talteenottoa laitteistolla, johon kuuluu lämmöntalteenottopesuri, jossa poistoilmalla lämmitetään tuotantolaitoksen tukkipuun hautomon kiertovettä sekä ilma-ilma-lämmönsiirrin, jolla lämmitetään pesurista poistuvan ilman jäännöslämmöllä ulkoilmaa tehdassalin tuloilmakäyttöön. Työn tavoitteena oli kehittää lämmöntalteenottojärjestelmän suunnittelua, mitoitusta ja ajotapoja. Työssä analysoitiin teoreettisesti pesuria ja ilmalämmönsiirrintä, kehitettiin lämmöntalteenottopesurin simulointimenetelmä ja mitattiin toiminnassa olevia talteenottolaitteistoja. Tutkimuksessa todettiin lämmöntalteenottohyötysuhteen vaihtelevan lämmityskaudella välillä 50-70 %. Lämmöntalteenottolaitteiston pesurin veteen saatava teho riippuu ensisijaisesti viilunkuivaajan poistoilman lämpösisällöstä, joka on enimmäkseen kosteusriippuvainen ja ilmanvaihtoilmaan saatava teho ulkolämpö-tilan määräämästä tehontarpeesta. Pesurin vesijärjestelmän vaikutusmekanismit pesurin suorituskykyyn tunnistettiin ja niiden pohjalta annetaan suositukset mitoitukseen ja ajotapaan. Lämmöntalteenottolaitteiston lämpötehon tasapainottamiseen pesurin ja ilma-ilma-lämmönsiirtimen välillä mitoituksen avulla esitellään työkalut.

Hybrid turbo FEC/ARQ systems and distributed space-time coding for cooperative transmission

Cooperative transmission can be seen as a "virtual" MIMO system, where themultiple transmit antennas are in fact implemented distributed by the antennas both at the source and the relay terminal. Depending on the system design, diversity/multiplexing gainsare achievable. This design involves the definition of the type of retransmission (incrementalredundancy, repetition coding), the design of the distributed space-time codes, the errorcorrecting scheme, the operation of the relay (decode&forward or amplify&forward) and thenumber of antennas at each terminal. Proposed schemes are evaluated in different conditionsin combination with forward error correcting codes (FEC), both for linear and near-optimum(sphere decoder) receivers, for its possible implementation in downlink high speed packetservices of cellular networks. Results show the benefits of coded cooperation over directtransmission in terms of increased throughput. It is shown that multiplexing gains areobserved even if the mobile station features a single antenna, provided that cell wide reuse of the relay radio resource is possible.

Teknologiat ja toteutustavat palvelukeskeiseen arkkitehtuuriin perustuvassa Internet-pohjaisessajärjestelmässä

Palvelukeskeiseen arkkitehtuuriin perustuvia järjestelmiä voidaan kehittää käyttämällä useita vaihtoehtoisia teknologioita. Toteuttamiseen parhaiten soveltuvia teknologioita ovat erilaiset standardikokoelmat, jotka tukevat useiden toisistaan toteutustavaltaan poikkeavien järjestelmien yhdistämistä käyttämällä standardeihin perustuvia rajapintoja. Täten kyseiset kokoelmat tukevat laajojen, useista erillisistä osista koostuvien palvelujärjestelmien kehittämistä. Tässä työssä selvitetään mikä palvelukeskeinen arkkitehtuuri on sekä millaisia komponentteja ja teknologioita kyseiseen arkkitehtuuriin perustuvan palvelujärjestelmän toteuttamiseen tarvitaan. Tavoitteena on esitellä palvelukeskeinen arkkitehtuuri ja siihen liittyvät teknologiat sekä suunnitella korkealla tasolla kyseisiä teknologioita hyödyntävä integraatioalusta käyttäjien ja useiden palvelun tarjoajien yhdistämiseksi. Työn tuloksena syntyvän teknologiaselvitysraportin selvitysluonteen vuoksi työssä ei suunnitella tarkasti toteutettavaa järjestelmää vaan ainoastaanpohjustetaan järjestelmän suunnittelua sekä esitellään siihen liittyviä arkkitehtuuri- ja toteutusmahdollisuuksia. Internet-pohjainen palvelukeskeiseen arkkitehtuuriin perustuva järjestelmä voi perustua suoriinverkon välisiin yhteyksiin tai vaihtoehtoisesti erityyppisiin välitason sovelluksiin. Välitason sovellukset mahdollistavat niiden tyypistä riippuen järjestelmän erilaisten lisäominaisuuksien toteuttamisen ja tukevat useita yleisimpiä palvelukeskeisiä teknologioita. Työn tuloksena syntyneen teknologiaselvityksen perusteella näistä teknologioista Web-palvelu -arkkitehtuuri ja siihen liittyvät menetelmät soveltuvat parhaiten suunniteltavan järjestelmän rakenneosiksi. Järjestelmän tarkemmat toteutustavat riippuvat myöhemmin määriteltävistä yksityiskohtaisista vaatimuksista sekä valittavasta välitason ohjelmiston toteutuksesta.

How to redesign a virtual library website: a case study

This abstract presents how we redesigned, with user-centred design methods, the way we organize and present the content on the UOC Virtual Library website. The content is now offered in a way that is more intuitive, usable and easy to understand, based on criteria of customization, transparency and proximity.The techniques used to achieve these objectives included benchmarking, interviews and focus groups during the user requirement capture phase and user tests to assess the process and results.

Terrestrial Trunked Radio - verkossa toimivan reaaliaikaisen Short Data Service - viesteihin perustuvan telemetriasovelluksen ohjelmistokehitys

Tämä diplomityö tarkastelee TETRA-verkon soveltuvuutta turvallisuusviranomaisille tarkoitettuun telemetriasovellukseen, jossa erilaiset mittausdatat ja hälytystiedot kulkevat verkon yli SDS-viestiliikenteenä. Diplomityön tarkoituksena on tehdä kaksi sulautettua ohjelmistoa sekä yksi PCohjelmisto, joita käytetään rakennettavassa demolaitteistossa. Lisäksi selvitetään TETRA-verkon toimivuus ja rajoitukset sovelluksessa eri olosuhteissa ja eri kuormitustilanteissa. Diplomityön teoriaosassa käydään läpi työn määrittely ja ohjelmistonkehitysprosessin läpivienti eri osa-alueilla. Loppuosassa kuvataan tehdyt ohjelmistot erikseen ja yhdessä suunnittelusta toteutukseen, sekä lopullisen järjestelmän testaus.

Mielipidekyselyjärjestelmän suunnittelu ja toteutus

Tämän työn tavoitteena on suunnitella yksinkertainen Internet-pohjainen mielipidekyselyjärjestelmä sekä esitellä yksityiskohtaisesti järjestelmän toteutus ja siihen liittyvät menetelmät. Menetelmistäesitellään ainoastaan ennalta valitut menetelmät järjestelmän toteutukseen, tietojen esittämiseen, esitystavan muotoiluun sekä tietojen varastointiin. Järjestelmä toteutetaan HTML- ja PHP-kielillä sekä käyttämällä CSS-menetelmän tyylimuotoiluja ja XML-kielen muotoiluun perustuvia tiedostoja tietovarastoina. Järjestelmän suunnitteluun liittyen työssä pyritään kuvaamaan järjestelmään toteutettavat kaksi erillistä käyttöliittymää, pääkäyttäjän käyttöliittymä ja normaalin käyttäjän käyttöliittymä, sekä näihin toteutettavat toiminnot. Pääkäyttäjän tärkeimmät toiminnot ovat mielipidekyselyiden luominen, käyttäjien lisääminen kyselyihin sekä kyselyiden tulosten seuranta. Normaalin käyttäjän toiminnot taas rajoittuvat kirjautumiseen ja kyselyyn vastaamiseen. Järjestelmän toteutuksen kuvauksessa kuvataan tarkasti edellä mainittujen kahden käyttöliittymän toiminnot sekä näiden toimintojen toteutustavat. Lisäksi toteutuksen kuvauksen yhteydessä määritellään tarkasti järjestelmän tietovarastoina toimivien tiedostojen sisällön muoto. Työn lopputuloksena syntyi valituilla toteutustavoilla toteutettu toimiva mielipidekyselyjärjestelmä sekä tämä järjestelmän suunnitteluun ja toteutuksen selvittämiseen keskittynyt dokumentti. Toteutetusta järjestelmästä ei tullut täydellinen vaan jatkokehityksessä voidaan harkita esimerkiksi tietokannan käyttämistä järjestelmän tietovarastoina sekä joidenkin lisäominaisuuksien toteuttamista. Tavoitteeseen päästiin kuitenkin, sillä toteutettu järjestelmä on toimiva ja käyttötarkoitukseensa sopiva.

Conflict-based Method for Conceptual Process Synthesis

The changing business environment demands that chemical industrial processes be designed such that they enable the attainment of multi-objective requirements and the enhancement of innovativedesign activities. The requirements and key issues for conceptual process synthesis have changed and are no longer those of conventional process design; there is an increased emphasis on innovative research to develop new concepts, novel techniques and processes. A central issue, how to enhance the creativity of the design process, requires further research into methodologies. The thesis presentsa conflict-based methodology for conceptual process synthesis. The motivation of the work is to support decision-making in design and synthesis and to enhance the creativity of design activities. It deals with the multi-objective requirements and combinatorially complex nature of process synthesis. The work is carriedout based on a new concept and design paradigm adapted from Theory of InventiveProblem Solving methodology (TRIZ). TRIZ is claimed to be a `systematic creativity' framework thanks to its knowledge based and evolutionary-directed nature. The conflict concept, when applied to process synthesis, throws new lights on design problems and activities. The conflict model is proposed as a way of describing design problems and handling design information. The design tasks are represented as groups of conflicts and conflict table is built as the design tool. The general design paradigm is formulated to handle conflicts in both the early and detailed design stages. The methodology developed reflects the conflict nature of process design and synthesis. The method is implemented and verified through case studies of distillation system design, reactor/separator network design and waste minimization. Handling the various levels of conflicts evolve possible design alternatives in a systematic procedure which consists of establishing an efficient and compact solution space for the detailed design stage. The approach also provides the information to bridge the gap between the application of qualitative knowledge in the early stage and quantitative techniques in the detailed design stage. Enhancement of creativity is realized through the better understanding of the design problems gained from the conflict concept and in the improvement in engineering design practice via the systematic nature of the approach.

El nou web de la Biblioteca Virtual de la UOC: Jornada Tècnica

Presentació del projecte de disseny i desenvolupament del nou web de la Biblioteca Virtual, a la Jornada Tècnica de UOC.

How to redesign a virtual library website: a case study

This abstract presents how we redesigned, with user-centred design methods, the way we organize and present the content on the UOC Virtual Library website. The content is now offered in a way that is more intuitive, usable and easy to understand, based on criteria of customization, transparency and proximity.The techniques used to achieve these objectives included benchmarking, interviews and focus groups during the user requirement capture phase and user tests to assess the process and results.

Sulautetun järjestelmän Web-käyttö

Diplomityössä on tutkittu sulautetun järjestelmän liittämistä Ethernet-verkkoon sekä TCP/IP-protokollapinoon kuuluvien tavallisimpien protokollien toimintaa. Työn tuloksien perusteella on suunniteltu harjoitustyö, jota voidaan käyttää sähkötekniikan osaston opetuksessa. Työssä hankittiin Atmelin sulautettu Web-serverikortti (EWS) ja STK500-kortti serverin ohjelmointiin. Serverin mukana tuli Internet-yhteyden mahdollistava TCP/IP-pinon lähdekoodi. Työssä selvitettiin TCP/IP:hen kuuluvien protokollien toimintaa teoriassa ja käytännön toteutusta EWS:n avulla. Lähdekoodiin lisättiin ominaisuudet, joiden avulla laite hakee kellonaikatiedot aikapalvelimelta time-protokollaa käyttäen ja lähettää sähköpostia määriteltyyn osoitteeseen sähköpostipalvelimen kautta. Laitetta käytettiin sekä palvelimena että asiakkaana. Työssä perehdyttiin sulautettujen järjestelmien yleisiin ominaisuuksiin ja erilaisiin verkonhallinnan apuohjelmiin. Työssä tutkittiin palvelin- ja asiakaskoneen välillä Ethernetissä kulkevaa verkkoliikennettä. Työssä minimoitiin protokollatiedostojen viemä tila prosessorin muistista ja tutkittiin Internet-yhteyden kuluttamien kellojaksojen määrää. Työssä selvitettiin tietoturva-kysymysten merkitystä ja toteutusta sulautetuissa järjestelmissä.

Cam-tekniikan opetusohjelma

Tässä työssä keskitytään rakentamaan opetusohjelma, jonka avulla pyritään kehittämään tietokoneavusteisten valmistusjärjestelmien käyttöä puutuotteiden valmistuksessa. Tavoitteena on cam-teknologian opetustyön ja oppimistapahtuman selkeyttäminen sekä järjestelmän opetuksessa tarvittavan koulutusaineiston luominen. Suunnittelussa pyritään vastaamaan puutuoteteollisuuden tämän hetken tarpeisiin, jotta koulutettavat pystyisivät toimimaan nykyaikaisten cam-järjestelmien parissa. Opetusohjelma sisältää opetuskokonaisuuksia cam-järjestelmän rakenteesta, sen toteuttamisesta ja käytöstä. Lisäksi työssä sovelletaan toteutettua opetusohjelmaa erilaisten kohderyhmien opetussuunnitelmissa ja tutkitaan verkkopohjaisen oppimisympäristön luonnetta ja sen mahdollista käyttöä cam-tekniikan opetuksessa.