Sôbre alguns Phlebotomus e Brumptomyia da Colômbia (Diptera, Psychodidae)

The first case of Kala-azar in Colombia was discovered in Soledad, S. Vicente do Chucuri, Dept. Santander, by Gast-Galvis who viscerotomized a three year old girl deceased in December, 1943. In 1944, fifty-three Phlebotominae were collected in the chicken pen of the girl's house, two new species included. Mangabeira helped by A. Gast Galvis, Juan Antonio Montoya and E. Osorno Mesa, collected some Phlebotomus in that country. The geographical distribution of the species of Phlebotomus collected in Colombia (P. abonnenci, P. camposi, P. columbianus, P. dubitans, P. gasti, P. montoyai, P. saulensis, P. serranus, P. triramulus) and two species of Brumptomyia (B. beaupertuyi and b mesari), are included. our description of the male P. columbianus is based on some specimens found in association with females. However, doubts exist about such association of sexes. There is no correspondence between the length of the spicules and the ducts of spermathecae. Besides, the specimens were not obtained by raising. The following new species are described and compared with previously known ones: a) Phlebotomus gasti sp. n. differs from the other species by a protruding tubercle in the gubernaculum. It has also fewer setae in the tuft of the basistyle, a different length of the inferior gonapophyses, and a differently shaped clasper. b) Phlebotomus dubitans sp. n. differs from P. walkeri and P. deanei (according to personal information from O. Theodor, who examined the types, they are identical to P. williamsi and P. sericeus respectively), mainly because these species have the inferior gonapophyses larger than the basistyle and fewer setae in the basistyle. P. evandroi is separated by the shape of the claspers and by the tuft of setae of the basistyle. P. marajoensis is the closest relative to P. dubitans. There is a possibility of their being synonymous. On the other hand, they can be differentiated by the existence of three extra distal spines in P. marajoensis. There is also a difference in their palpal indexes: for marajoensis I - II - IV - III - V, and for dubitans I - IV (III - II) - V. We notice, too, that the inferior gonapophyses in P. marajoensis is a little shorter. P. marajoensis has a long seta in the basistyle (clearly shown in the original drawing), not found in the new species. c) Phlebotomus montoyai sp. n.: The closest relatives are P. noguchii, P. peruensis, P. pescei, P. quinquifer and P. rickardi. They differ from the new species by the number and length of the setae of the basistyle tuft which are more numerous and longer in the new species. The shapes of their claspers are also different. Other differences are: the basal portion of the basistyle in P. noguchii is very wide (in montoyai it is narrower); the intermediate spine of the dististyle is located on a protruding tubercle ( in the new species there is hardly a tubercle); the spicules are long, and the inferior gonapophyses is longer than the basistyle. P. quinquifer and P. rickardi have a shorter dististyle and narrower wings, with different venation. The main difference, however lies, in the M4, which ends almost at the level of the junction of M1 with M2 (in P. montoyai the M4 ends far behind). In P. peruensis and P. pescei the intermediary spine of the dististyle is closer to the distal spine than to the basal one, whereas in the new species it is situated between the two pairs. Their inferior gonapophyses is longer than the basistyle. d) Brumptomyia mesai sp. n. - Closest relatives are: B. hamatus, B. pentacanthus, B. beaupertuyi which are easily separated from the new species because the tufts of their basistyle have thin and differently shaped hairs. Also their claspers are shaped differently. B. avellari is also easily recognized on account of the twisted aspect of its clasper and because the basal tuft of the basistyle has few setae, B. brumpti tuft of setae arise directly from the basistyle; these setae are stronger than those of the new species. It has 8 blade-like setae located on the inner surface of the distal half, whereas the new species has only six setae. In B. brumpti, there are three median and two terminal spines in the dististyle; in the new species, there are two median and two terminal spines and one between them, which is closer to the two median spines. The comparison with B. galindoi is based in a specimen determined by Fairchild and deposited in the entomological collection of the "Faculdade de Higiene e Saúde Pública da Universidade de S. Paulo". The genitalia of the new species is much shorter, in galindoi the inferior gonapophyses is 0,8 mm long whereas in B. mesai it hardly reaches 0,6 mm. The shape of the clasper and the distribution of its setae are different. The sub-median lamellae, besides being longer in B. galindoi are also longer in comparison with the other parts of the genitalia. The gubernaculum of the new species is longer, thinner, and more pointed; in B. galindoi it is shorter and triangular. In the drawing published by Fairchild and Hertig 91947), the basistyle shows 8 blade-like setae on the distal half, whereas in the new species only six are found.

Metodologia a seguir per la reconstrucció d’imatges mèdiques i la seva transformació en geometries mallades per a l’ús computacional

Estudi elaborat a partir d’una estada a l'Imperial College of London, Gran Bretanya, entre setembre i desembre 2006. Disposar d'una geometria bona i ben definida és essencial per a poder resoldre eficientment molts dels models computacionals i poder obtenir uns resultats comparables a la realitat del problema. La reconstrucció d'imatges mèdiques permet transformar les imatges obtingudes amb tècniques de captació a geometries en formats de dades numèriques . En aquest text s'explica de forma qualitativa les diverses etapes que formen el procés de reconstrucció d'imatges mèdiques fins a finalment obtenir una malla triangular per a poder‐la processar en els algoritmes de càlcul. Aquest procés s'inicia a l'escàner MRI de The Royal Brompton Hospital de Londres del que s'obtenen imatges per a després poder‐les processar amb les eines CONGEN10 i SURFGEN per a un entorn MATLAB. Aquestes eines les han desenvolupat investigadors del Bioflow group del departament d'enginyeria aeronàutica del Imperial College of London i en l'ultim apartat del text es comenta un exemple d'una artèria que entra com a imatge mèdica i surt com a malla triangular processable amb qualsevol programari o algoritme que treballi amb malles.

Generic object classification for autonomous robots

Un dels principals problemes de la interacció dels robots autònoms és el coneixement de l'escena. El reconeixement és fonamental per a solucionar aquest problema i permetre als robots interactuar en un escenari no controlat. En aquest document presentem una aplicació pràctica de la captura d'objectes, de la normalització i de la classificació de senyals triangulars i circulars. El sistema s'introdueix en el robot Aibo de Sony per a millorar-ne la interacció. La metodologia presentada s'ha comprobat en simulacions i problemes de categorització reals, com ara la classificació de senyals de trànsit, amb resultats molt prometedors.

Physa Marmorata Guilding, 1828 (Pulmonata: Physidae)

A description of Physa marmorata Guilding, 1828, based on material collected at its type-locality, the Caribbean island of Saint Vincent, is presented. The shell is thin, horn-colored, surface very glossy, diaphanous. Spire acute, elevated; protoconch distinct, rounded-conical, reddish-brown; five not shouldered, broadly convex whorls with subobsolete spiral lines and thin growth lines. Aperture elongated, 1.4-2.0 times as long as the remaining shell length, narrow obovate-lunate; upper half acute-angled,lower half oval,narrowly rounded at the base, outer lip sharp, inner lip completely closing the umbilical region; a very distinct callus on the parietal wall; columellar lip with a low ridge gradually merging into the callus. ratios: shell width/shell length = 0.44 - 0.52 (mean 0.47); spire length /shell lenght = 0.33-0.41 (mean 0.39); aperture length/shell lenght = 0.59-0.67 (mean 0.62). Oral lappets laterally mucronate, foot spatulate with deeply pigmented acuminate tail. Mantle reflection with 6-10 short triangular dentations covering nearly half the right surface of the body whorl, and 4-6 covering a part of the ventral wall. Body surface with tiny dots of greenish-yellow pigment besides melanin. Renal tube tightly folded in toa zigzag course. Ovotestis diverticula acinous, laterally pressed against each other around a collecting canal. Ovispermiduct with well-developed seminal vesicle. oviduct highly convoluted, merging into a less convoluted nidamental gland which narrows to a funnel-shaped uterus and a short vagina. Spermathecal body oblong, more or less constricted in the middle and somewhat curved; spermathecal duct uniformly narrow, a little longer than be body. About 20 prostatic diverticula, simple, bifurcate or divided into a few short branches, distalmost ones assembled into a cluster. Penis long, nearly uniformly narrow; penial canal with lateral opening about the junction of its middle and lower thirds. Penial sheath with a bulbous terminal expasion the tip of which isinserted into the caudal end of the prepuce. Prepuce shouldered, much wider than the narrow portion of the penial sheath. Penial sheath/prepuce ratio about 2.08 (1.45-2.75). The main extrinsic muscles of the penial complex are a retractor, with a branch attached to the bulb, and another to the caudal end of the penial sheath; and a protractor, with a branch attached to the shoulder of the prepuce and adjoining area of the penial sheath, and another to the caudal end of the penial sheath. Egg capsule C-shaped, with 10-30 elliptical eggs (snails 10mm long) measuring about 1.10 mm (0.90-1.32) through the long axis and surrounded by an inner and an outer lamellate membranes. Jaw a simple obtusely V-shaped plate. radula will be described separately.

Physa cubensis Pfeiffer, 1839 (Pulmonata: Physidae)

A description of Physa cubensis Pfeiffer, 1839, based on 15 speciments collected in Havana, Cuba, is presented. The shell, measuring 9.0 x 4,8mm to 12.3 x 6.4mm, is ovate-oblong, thin, diaphanous, horncolored, shining. Spire elevated, broadly conical; protoconch distinct, roundish, reddish-brown. About five moderately shouldered, roundly convex whorls, penultimate whorl expanded; spiral striation subobsolete; growth line faint on the intermediate whorls, clearly visible on the body whorl, crowded here and there. Suture well impressed. Aperture elongated 2.05 - 2.67 (mean 2.27) times as long as the remaining length of the shell, narrow obovulate-lunate; upper half acute-angled, lower half oval, narrowly rounded at the base; outer lip sharp, inner lip completely closing the umbilical region; a thick callus on the parietal wall; columellar plait well marked. Ratios: shell width/shell length - 0.52-0.61 (mean 0.55); spire length/shell length = 0.27 - 0.33 (mean 0.31); aperture length/shell length = 0.67 - 0.73 (mean 0.69). Oral lappets laterally mucronate; foot spatulate with acuminate tail. Mantle relection with 6 - 8 short triangular dentations in the right lobe (columellar side) and 4 - 6 in the left lobe (near the pneumostome). Renal tube tightly folded into a zigzag course. Ovotestis, ovispermiduct, seminal vesicle, oviduct, nidamental gland, uterus and vagina as in Physa marmorata (see Paraense, 1986, Mem. Inst. Oswaldo Cruz, 81: 459-469). Spermathecal body egg-shaped or pear-shaped; spermathecal ducta uniformly narrow with expanded base, a little longer than the body. Spermiduct, prostate and vas deferens as in P. marmorata (Paraense, loc. cit.). Penis wide proximally, narrowing gradually apicad; penial canal with subterminal outlet. Penial sheath following the width of the penis and ending up by a bulbous expansion somewhat narrower than the proximal portion. Penaial sheath/prepuce ration = 1,25 - 1,83 (mean 1.49). Prepuce much wider than the bulb of the penial shealth, moderately shouldered owing to the intromission of the bulb, and with a large gland in one side of its proximal half occupating about a third of its length. Extrinsic muscles of the penial complex as in P. marmorata. Jaw a simple obtusely V-shaped plate. Radula to be described separetely.

Estructures sedimentàries: descripció i modelització de la seva gènesi

Treball de recerca realitzat per un alumne d’ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l’any 2008. L’objectiu de la recerca ha estat l’estudi de les condicions en què s’arriben a formar les estructures sedimentàries internes, relacionades amb un flux de tipus unidireccional. S’ha fabricat un tanc d’experimentació que, a petita escala, pogués reproduir de la manera més propera a la realitat les condicions naturals en què es formen aquest tipus d’estructures. En aquest tanc d’experimentació s’han sotmès sediments de granulometries diverses a fluxos unidireccionals de diferents intensitats. Posteriorment, s’ha fet un diagrama d’estabilitat d’estructures sedimentàries en funció de la velocitat del flux que l’origina i de la granulometria del sediment. Aquest diagrama permetrà extrapolar, quan es trobin aquestes estructures fossilitzades, en quines condicions de flux s’han originat.

Agapornis: relació entre fertilitat i neixements en els Agapornis lilianae i negrigenis

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. A partir d’ous exemplars de dues espècies d’agapornis -nigrigenis i lilianae-, es pretén realitzar un estudi comparatiu d’ambdues, tant pel que fa a l’etologia com a la reproducció, als hàbits alimentaris, etc. La idea inicial parteix de la possibilitat d’intercanviar alguns ous de cada espècie per mirar d’esbrinar si els ocells reproductors s’adonen de tal canvi. La hipòtesi inicial del treball considera que els ocells els criaran de la mateixa forma que si es tractés dels seus propis pollets. Les conclusions, però, han anat més enllà de la formulació de la hipòtesi inicial, de tal manera que, al final, i en forma de diagrama, s’ha pogut parlar de l’eclosió o manca d’eclosió dels ous d’aquesta espècie, tot relacionant temes diversos que van des de la fertilitat a les diferents mides dels ous. A més, l’autor també ha pogut concloure que els Agapornis lilianae són capaços de criar ocells d’una altra espècie (en aquest cas d Agapornis roseicollis) amb tota normalitat.

Bases de Datos para Intervenciones de Usuarios Técnicos

Aquest document complementa les subtasques 2.4.2, 2.4.3 i 2.4.4 relacionades amb els Informes dels estudis de viabilitat constructiva, els resultats de la intervenció i la validació de la intervenció, proporcionant el nexe lògic entre la caracterització de les tècniques no-destructives i semidestructives realitzat en els documents I2.17 i I.2.18 i les millores de processos que s'aborden d'una forma més sistemàtica en el *SP4, en relació amb el desenvolupament i aplicació de models d'optimització multicriteri. Per a arribar a aquest objectiu i resoldre els problemes de interoperabilitat lligats a diferents bases de dades, ha estat necessari estendre l'Ontologia orientada inicialment en el SP6 per a usuaris amb algun tipus de discapacitat, a usuaris corresponents als tècnics que vagin a desenvolupar les intervencions d'acord amb les tècniques disponibles. Aquesta extensió inclou el diagrama entitat-relació que estén al cas dels tècnics l'esquema conceptual inicialment restringit als usuaris finals (ciutadans eventualment discapacitats). La major dificultat procedeix del caràcter excepcional de moltes de les intervencions realitzades, la qual cosa fa realment difícil l'estandardització dels processos orientats a resoldre el problema de l'accessibilitat al Patrimoni

Ecology of Triatoma rubrovaria (Hemiptera, Triatominae) in wild and peridomestic environments of Uruguay

This paper describes population structure, spatial distribution and habitat selection of wild and peridomestic populations of Triatoma rubrovaria (Blanchard, 1843). Field studies were carried out at Las Piedras and La Bolsa in the Northern Department of Artigas, Uruguay. A semicircular sampling area, divided in seven or eight triangular sectors was sequentially examined from October 1990 to November 1991. At Las Piedras (typical wild habitat) 1063 T. rubrovaria bugs were collected from 84 of the rocky outcroops ("pedregales"). Abundance varied by season peaking in October-November (spring). Throughout the year, most of the population was made up of third, fourth and fifth instar nymphs; adults were found from October to March. In the peridomestic environment of La Bolsa, however T. rubrovaria was less common and showed a more irregular instar distribution. Colonized ecotopes, were those close to houses. In both sites T. rubrovaria was mainly associated with the geckonid Homonota uruguayensis and the cockroach Blaptica dubia.

Control de instrumentos mediante el bus GPIB programado con MATLAB

El proyecto que se expone a continuación está dedicado al control de instrumentos mediante el bus de instrumentación GPIB programado con el software Matlab. Está dividido en dos partes. La primera, será llevada a cabo en el laboratorio de docencia y el objetivo será controlar el osciloscopio y el generador de funciones. Como ejemplo del control realizado se desarrollará una aplicación que permitirá obtener el diagrama de Bode de módulo de cualquier sistema electrónico. La segunda parte será llevada a cabo en el laboratorio de investigación y el objetivo será controlar el analizador de semiconductores. En este caso, la aplicación desarrollada permitirá la realización de medidas para la caracterización de transistores. Las aplicaciones de ambas partes estarán realizadas mediante una interfaz gráfica de usuario diseñada con la herramienta GUIDE de Matlab.

Simulium (Psaroniocompsa) tergospinosum new species (Diptera: Simuliidae) in siolii group from the southern part of the State of Amazonas, Brazil

The larva, pupa, male and female of Simulium tergospinosum n. sp. are described and illustrated. The adults of this new species share many characters with species in the subgenus Psaroniocompsa, where it is placed. The larva of this species bears dorsal and lateral triangular tubercles on the abdomen and multiply branched scale-like setae on the body, suggesting that it belongs to the S. siolii species group. S. tergospinosum n.sp. was collected along the Juma River, Apuí county, in the southern part of the State of Amazonas, Brazil. The Juma, a black-water river, is a tributary of the Aripuanã River in the Madeira River hydrographic basin, on the southern part of Amazonas. Females were collected biting humans along the water courses during the sampling period (in the dry season).

Fidelidad al modelo especificado en el código generado automáticamente por la herramienta CASE Poseidon for UML

L'objectiu principal d'aquest treball és estudiar el grau de fidelitat al model especificat que manté el codi generat automàticament per l'eina CASE Poseidon Professional for UML. Concretament, estudiarem el codi que es genera en Java i SQL mitjançant un diagrama de classes determinat.

Myxobolus insignis sp. n. (Myxozoa, Myxosporea, Myxobolidae), a parasite of the Amazonian teleost fish Semaprochilodus insignis (Osteichthyes, Prochilodontidae)

A new myxosporean species is described from the fish Semaprochilodus insignis captured from the Amazon River, near Manaus. Myxobolus insignis sp. n. was located in the gills of the host forming plasmodia inside the secondary gill lamellae. The spores had a thick wall (1.5-2 µm) all around their body, and the valves were symmetrical and smooth. The spores were a little longer than wide, with rounded extremities, in frontal view, and oval in lateral view. They were 14.5 (14-15) µm long by 11.3 (11-12) µm wide and 7.8 (7-8) µm thick. Some spores showed the presence of a triangular thickening of the internal face of the wall near the posterior end of the polar capsules. This thickening could occur in one of the sides of the spore or in both sides. The polar capsules were large and equal in size surpassing the midlength of the spore. They were oval with the posterior extremity rounded, and converging anteriorly with tapered ends. They were 7.6 (7-8) µm long by 4.2 (3-5) µm wide, and the polar filament formed 6 coils slightly obliquely to the axis of the polar capsule. An intercapsular appendix was present. There was no mucous envelope or distinct iodinophilous vacuole.

Estudi d'eines CASE que suporten OCLper a la generació automàtica de codi Java

Es tracta d'una recerca d'eines CASEque actualment suporten OCL en la generació automàtica de codi Java per estudiar-les ianalitzar-les a través d'un model de proves consistent en un diagrama de classes del modelestàtic de l'UML i una mostra variada d'instruccions OCL, amb l'objectiu de detectar lesseves mancances, analitzant el codi obtingut i determinar si controla o no cada tipus derestricció, i si s'han implementat bé en el codi.

Passarel·la de Pagaments

El treball consisteix en la realització d'una passarel·la de pagaments triangular. Una passarel·la d'aquest tipus permet gestionar pagaments on-line entre agents (comprador - comerciant - entitat financera), evitant que el comerciant conegui les dades de la tarjeta de crèdit i pugui realitzar canvis de la quantitat a pagar pel client.