Ultrasound-assisted selective hydrogenation of C-5 acetylene alcohols with Lindlar catalysts

The selective hydrogenation of 2-methyl-3-butyn-2-ol (MBY) was performed in the presence of Lindlar catalyst, comparing conventional stirring with sonication at different frequencies of 40, 380 and 850 kHz. Under conventional stirring, the reaction rates were limited by intrinsic kinetics, while in the case of sonication, the reaction rates were 50–90% slower. However, the apparent reaction rates were found to be significantly frequency dependent with the highest rate observed at 40 kHz. The original and the recovered catalysts after the hydrogenation reaction were compared using bulk elemental analysis, powder X-ray diffraction and scanning and transmission electron microscopy coupled with energy-dispersive X-ray analysis. The studies showed that sonication led to the frequency-dependent fracturing of polycrystalline support particles with the highest impact caused by 40 kHz sonication, while monocrystals were undamaged. In contrast, the leaching of Pd/Pb particles did not depend on the frequency, which suggests that sonication removed only loosely-bound catalyst particles.

Photogeneration of Hydrogen from Water by Hybrid Molybdenum Sulfide Clusters Immobilized on Titania

Two new hybrid molybdenum(IV) Mo3S7 cluster complexes derivatized with diimino ligands have been prepared by replacement of the two bromine atoms of [Mo3S7Br6]2− by a substituted bipyridine ligand to afford heteroleptic molybdenum(IV) Mo3S7Br4(diimino) complexes. Adsorption of the Mo3S7 cores from sample solutions on TiO2 was only achieved from the diimino functionalized clusters. The adsorbed Mo3S7 units were reduced on the TiO2 surface to generate an electrocatalyst that reduces the overpotential for the H2 evolution reaction by approximately 0.3 V (for 1 mA cm−2) with a turnover frequency as high as 1.4 s−1. The nature of the actual active molybdenum sulfide species has been investigated by X-ray photoelectron spectroscopy. In agreement with the electrochemical results, the modified TiO2 nanoparticles show a high photocatalytic activity for H2 production in the presence of Na2S/Na2SO3 as a sacrificial electron donor system.

Improving the photoactivity of bismuth vanadate thin film photoanodes through doping and surface modification strategies

Currently, one of the most attractive and desirable ways to solve the energy challenge is harvesting energy directly from the sunlight through the so-called artificial photosynthesis. Among the ternary oxides based on earth–abundant metals, bismuth vanadate has recently emerged as a promising photoanode. Herein, BiVO4 thin film photoanodes have been successfully synthesized by a modified metal-organic precursor decomposition method, followed by an annealing treatment. In an attempt to improve the photocatalytic properties of this semiconductor material for photoelectrochemical water oxidation, the electrodes have been modified (i) by doping with La and Ce (by modifying the composition of the BiVO4 precursor solution with the desired concentration of the doping element), and (ii) by surface modification with Au nanoparticles potentiostatically electrodeposited. La and Ce doping at concentrations of 1 and 2 at% in the BiVO4 precursor solution, respectively, enhances significantly the photoelectrocatalytic performance of BiVO4 without introducing important changes in either the material structure or the electrode morphology, according to XRD and SEM characterization. In addition, surface modification of the electrodes with Au nanoparticles further enhances the photocurrent as such metallic nanoparticles act as co-catalysts, promoting charge transfer at the semiconductor/solution interface. The combination of these two complementary ways of modifying the electrodes has resulted in a significant increase in the photoresponse, facilitating their potential application in artificial photosynthesis devices.

Intelligence professionalism in the Americas = Profesionalismo de inteligencia en las Américas /

Shipping list no.: 2004-0011-P.

Análisis de las aguas termales de Ledesma,provincia de Salamanca;y apuntamientos sobre el modo de tomar sus baños ... / año de 1815.

Mode of access: Internet.

Ioannis de Villa Real ... De signis, causis, essentia, prognostico & curatione morbi suffocantis libri duo ...

Mode of access: Internet.

Maquinas hydraulicas de molinos y herrerias, y govierno de los arboles y montes de Vizcaya /

Palau,

Gui a de co mo establecer un restaurante /

In Spanish.

CEPAL Review no. 118

Special issue: 40 years of CEPAL Review

Subject -centered and problem -based approaches to teaching clinical competence in physical therapy

Physical therapy students must apply the relevant information learned in their academic and clinical experience to problem solve in treating patients. I compared the clinical cognitive competence in patient care of second-year masters students enrolled in two different curricular programs: modified problem-based (M P-B; n = 27) and subject-centered (S-C; n = 41). Main features of S-C learning include lecture and demonstration as the major teaching strategies and no exposure to patients or problem solving learning until the sciences (knowledge) have been taught. Comparatively, main features of M P-B learning include case study in small student groups as the main teaching strategy, early and frequent exposure to patients, and knowledge and problem solving skills learned together for each specific case. Basic and clinical orthopedic knowledge was measured with a written test with open-ended items. Problem solving skills were measured with a written case study patient problem test yielding three subscores: assessment, problem identification, and treatment planning. ^ Results indicated that among the demographic and educational characteristics analyzed, there was a significant difference between groups on ethnicity, bachelor degree type, admission GPA, and current GPA, but there was no significant difference on gender, age, possession of a physical therapy assistant license, and GRE score. In addition, the M P-B group achieved a significantly higher adjusted mean score on the orthopedic knowledge test after controlling for GRE scores. The S-C group achieved a significantly higher adjusted mean total score and treatment management subscore on the case study test after controlling for orthopedic knowledge test scores. These findings did not support their respective research hypotheses. There was no significant difference between groups on the assessment and problem identification subscores of the case study test. The integrated M P-B approach promoted superior retention of basic and clinical science knowledge. The results on problem solving skills were mixed. The S-C approach facilitated superior treatment planning skills, but equivalent patient assessment and problem identification skills by emphasizing all equally and exposing the students to more patients with a wider variety of orthopedic physical therapy needs than in the M P-B approach. ^

Habitat Map for Lizard Island reef, Australia derived from a photo-transect survey field data collected in December 2011 and September/October 2012

An object based image analysis approach (OBIA) was used to create a habitat map of the Lizard Reef. Briefly, georeferenced dive and snorkel photo-transect surveys were conducted at different locations surrounding Lizard Island, Australia. For the surveys, a snorkeler or diver swam over the bottom at a depth of 1-2m in the lagoon, One Tree Beach and Research Station areas, and 7m depth in Watson's Bay, while taking photos of the benthos at a set height using a standard digital camera and towing a surface float GPS which was logging its track every five seconds. The camera lens provided a 1.0 m x 1.0 m footprint, at 0.5 m height above the benthos. Horizontal distance between photos was estimated by fin kicks, and corresponded to a surface distance of approximately 2.0 - 4.0 m. Approximation of coordinates of each benthic photo was done based on the photo timestamp and GPS coordinate time stamp, using GPS Photo Link Software (www.geospatialexperts.com). Coordinates of each photo were interpolated by finding the gps coordinates that were logged at a set time before and after the photo was captured. Dominant benthic or substrate cover type was assigned to each photo by placing 24 points random over each image using the Coral Point Count excel program (Kohler and Gill, 2006). Each point was then assigned a dominant cover type using a benthic cover type classification scheme containing nine first-level categories - seagrass high (>=70%), seagrass moderate (40-70%), seagrass low (<= 30%), coral, reef matrix, algae, rubble, rock and sand. Benthic cover composition summaries of each photo were generated automatically in CPCe. The resulting benthic cover data for each photo was linked to GPS coordinates, saved as an ArcMap point shapefile, and projected to Universal Transverse Mercator WGS84 Zone 56 South. The OBIA class assignment followed a hierarchical assignment based on membership rules with levels for "reef", "geomorphic zone" and "benthic community" (above).

Morphometrics of seagrasses at species level, Moreton Bay, Australia determined from core samples collected in 2012-2013

Seagrass meadows are important marine carbon sinks, yet they are threatened and declining worldwide. Seagrass management and conservation requires adequate understanding of the physical and biological factors determining carbon content in seagrass sediments. Here, we identified key factors that influence carbon content in seagrass meadows across several environmental gradients in Moreton Bay, SE Queensland. Sampling was conducted in two regions: (1) Canopy Complexity, 98 sites on the Eastern Banks, where seagrass canopy structure and species composition varied while turbidity was consistently low; and (2) Turbidity Gradient, 11 locations across the entire bay, where turbidity varied among sampling locations. Sediment organic carbon content and seagrass structural complexity (shoot density, leaf area, and species specific characteristics) were measured from shallow sediment and seagrass biomass cores at each location, respectively. Environmental data were obtained from empirical measurements (water quality) and models (wave height). The key factors influencing carbon content in seagrass sediments were seagrass structural complexity, turbidity, water depth, and wave height. In the Canopy Complexity region, carbon content was higher for shallower sites and those with higher seagrass structural complexity. When turbidity varied along the Turbidity Gradient, carbon content was higher at sites with high turbidity. In both regions carbon content was consistently higher in sheltered areas with lower wave height. Seagrass canopy structure, water depth, turbidity, and hydrodynamic setting of seagrass meadows should therefore be considered in conservation and management strategies that aim to maximize sediment carbon content.

What is this thing called Historical Archaeology?

Historical archaeology, in its narrow temporal sense -as an archaeology of the emergence and subsequent evolution of the Modern world- is steadily taking pace in Spanish academia. This paper aims at provoking a more robust debate through understanding how Spanish historical archaeology is placed in the international scene and some of its more relevant particularities. In so doing, the paper also stresses the strong links that have united historical and prehistorical archaeology since its inception, both in relation to the ontological, epistemological and methodological definition of the first as to the influence of socio-political issues in the latter. Such reflection is partly a situated reflection from prehistory as one of the paper’s authors has been a prehistorian for most of her professional life.