Cooperations in the nonprofit sector

Many Nonprofit Organizations are pursuing mergers and alliances with the purpose of become more sustainable, better use their resources, and generate a higher impact. This report wants to bring further concrete evidences to the contents highlighted by the researchers. Firstly, a theoretical framework is derived from the literature analysis. Based on that a case study is developed, which see the NOVA SBE and the IES – SBS planning a strategic alliance to constitute a new Social Entrepreneurship Center. A first analysis of the strategic alliance plan showed a wide potential in terms of impact generated and sustainability, only the future steps will be able to demonstrate the successful implementation.

Context costs and comparative advantages in the telecommunications sector in Portugal and China

This Work Project aims to discuss the Context Costs and Comparative Advantages of the Telecommunications sector both in Portugal and China. The work was built mostly on primary research by interviews with relevant people (business persons, University Professors and Agencies directors), and by economic data publicly available. A list of context costs and comparative advantages was drawn for each country and possible resolutions suggestions were made in the end. The context costs depend heavily on the economic situation of the countries and it should be taken into account when assessing the degree of magnitude of each cost of context. The competitive advantages of each country were drawn in comparison with one another. Some key results stand out: firstly, Portugal’s costs of context depend mainly on governmental decisions, uncertainties and instability and China’s cost of context depend primarily on cultural norms, mainly the Guanxi; second, the telecommunications sector shares most of its context costs and advantages with other sectors; third, China as an economic power could use the telecommunications sector as a way to further develop and boost its economy.

Innovative medicines in the portuguese private health sector

The present dissertation aims at contributing to a strategic view over the use of innovative medicines in the portuguese private health sector, as a way of being complementary to public system that nowadays finances most of the innovative medicines. With the rationalization of expenses in the public health sector, pharmaceutical companies tend to look for opportunities of expansion to the private sector. The creation of innovative financial models for the private sector to cover innovative treatments is the proposed way of surpassing the restriction on the NHS sales of innovative medicines. This can be both for differentiating private health providers from the NHS or for the creation of premium services that can be differentiated from other private providers of the portuguese market.

Understanding impact readiness in Portugal’s social sector and designing a framework for capacity-building for social impact

This project is based on the theme of capacity-building in social organisations to improve their impact readiness, which is the predictability of delivering intended outcomes. All organisations which have a social mission, non-profit or for-profit, will be considered to fall within the social sector for the purpose of this work. The thesis will look at (i) what is impact readiness and what are the considerations for building impact readiness in social organisations, (ii) what is the international benchmark in measuring and building impact readiness, (iii) understand the impact readiness of Portuguese social organisations and the supply of capacity building for social impact in Portugal currently, and (iv) provide recommendations on the design of a framework for capacity building for impact readiness adapted to the Portuguese context. This work is of particular relevance to the Social Investment Laboratory, which is a sponsor of this project, in its policy work as part of the Portuguese Social Investment Taskforce (the “Taskforce”). This in turn will inform its contribution to the set-up of Portugal Inovação Social, a wholesaler catalyst entity of social innovation and social investment in the country, launched in early 2015. Whilst the output of this work will be set a recommendations for wider application for capacity-building programmes in Portugal, Portugal Inovação Social will also clearly have a role in coordinating the efforts of market players – foundations, corporations, public sector and social organisations – in implementing these recommendations. In addition, the findings of this report could have relevance to other countries seeking to design capacity building frameworks in their local markets and to any impact-driven organisations with an interest in enhancing the delivery of impact within their work.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Risk acceptance in the furniture sector: Analysis of acceptance level and relevant influence factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

Evaluation of the performance of recycled textile fibres in the mechanical behaviour of a gypsum and cork composite material

Given the need for using more sustainable constructive solutions, an innovative composite material based on a combination of distinct industrial by-products is proposed aiming to reduce waste and energy consumption in the production of construction materials. The raw materials are thermal activated flue-gas desulphurization (FGD) gypsum, which acts as a binder, granulated cork as the aggregate and recycled textile fibres from used tyres intended to reinforce the material. This paper presents the results of the design of the composite mortar mixes, the characterization of the key physical properties (density, porosity and ultrasonic pulse velocity) and the mechanical validation based on uniaxial compressive tests and fracture energy tests. In the experimental campaign, the influence of the percentage of the raw materials in terms of gypsum mass, on the mechanical properties of the composite material was assessed. It was observed that the percentage of granulated cork decreases the compressive strength of the composite material but contributes to the increase in the compressive fracture energy. Besides, the recycled textile fibres play an important role in the mode I fracture process and in the fracture energy of the composite material, resulting in a considerable increase in the mode I fracture energy.

Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing

Printed electronics represent an alternative solution for the manufacturing of low-temperature and large area flexible electronics. The use of inkjet printing is showing major advantages when compared to other established printing technologies such as, gravure, screen or offset printing, allowing the reduction of manufacturing costs due to its efficient material usage and the direct-writing approach without requirement of any masks. However, several technological restrictions for printed electronics can hinder its application potential, e.g. the device stability under atmospheric or even more stringent conditions. Here, we study the influence of specific mechanical, chemical, and temperature treatments usually appearing in manufacturing processes for textiles on the electrical performance of all-inkjet-printed organic thin-film transistors (OTFTs). Therefore, OTFTs where manufactured with silver electrodes, a UV curable dielectric, and 6,13-bis(triisopropylsilylethynyl) pentance (TIPS-pentacene) as the active semiconductor layer. All the layers were deposited using inkjet printing. After electrical characterization of the printed OTFTs, a simple encapsulation method was applied followed by the degradation study allowing a comparison of the electrical performance of treated and not treated OTFTs. Industrial calendering, dyeing, washing and stentering were selected as typical textile processes and treatment methods for the printed OTFTs. It is shown that the all-inkjet-printed OTFTs fabricated in this work are functional after their submission to the textiles processes but with degradation in the electrical performance, exhibiting higher degradation in the OTFTs with shorter channel lengths (L=10 μm).

Towards high performance and multi-functional structural membranes using advanced fibrous and textile materials

Scientific and technological advancements in the area of fibrous and textile materials have greatly enhanced their application potential in several high-end technical and industrial sectors including construction, transportation, medical, sports, aerospace engineering, electronics and so on. Excellent performance accompanied by light-weight, mechanical flexibility, tailor-ability, design flexibility, easy fabrication and relatively lower cost are the driving forces towards wide applications of these materials. Cost-effective fabrication of various advanced and functional materials for structural parts, medical devices, sensors, energy harvesting devices, capacitors, batteries, and many others has been possible using fibrous and textile materials. Structural membranes are one of the innovative applications of textile structures and these novel building skins are becoming very popular due to flexible design aesthetics, durability, lightweight and cost benefits. Current demand on high performance and multi-functional materials in structural applications has motivated to go beyond the basic textile structures used for structural membranes and to use innovative textile materials. Structural membranes with self-cleaning, thermoregulation and energy harvesting capability (using solar cells) are examples of such recently developed multi-functional membranes. Besides these, there exist enormous opportunities to develop wide varieties of multi-functional membranes using functional textile materials. Additionally, it is also possible to further enhance the performance and functionalities of structural membranes using advanced fibrous architectures such as 2D, 3D, hybrid, multi-layer and so on. In this context, the present paper gives an overview of various advanced and functional fibrous and textile materials which have enormous application potential in structural membranes.

Análise e melhoria da produtividade numa empresa do sector de componentes de automóveis

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Redes de inovação em pequenas e médias empresas: um estudo de caso no setor têxtil

Dissertação de mestrado em Engenharia Industrial

A new sector of Via XVII Necropolis in Bracara Augusta: the High Empire phase

Between 2008 and 2009 a preventive excavation supervised by the Unit of Archaeology of the University of Minho was conducted in an area with approximately 5000 square meters allowing the identification of a wide sector of the Via XVII necropolis, which is one of the five roman necropolises known to have existed in Bracara Augusta. The findings enabled us to define a typological framework related with incinerations, to understand the internal organization of the necropolis and recover the ritual marks of the funerary practices between the first century BC and the second century AD.

Descentralização e flexibilidade organizacional: implicações para a gestão de recursos humanos

Dissertação de mestrado em Estudos de Gestão

Contribution to an efficient transmission of information to the textile fashion consumer and the influence in sustainable attitudes

The concepts involved in sustainable textile fashion, demanding good knowledge about raw materials, processes, end use properties and circuits amongst others, are able to determine the way the textile product is designed and the behavior of the consumer, regarding life style and buying decisions. The textile product`s life integrates raw materials, their processing, distribution, use by the consumer and destination of the product after useful lifetime, this is, his complete life cycle. It is very important to recognize the power of the consumer to influence parameters related to sustainability, namely when he decides how, when and why he buys and afterwards by the attitudes taken during and after use. The conscious act of consumption involves ethical, ecological and technical knowledge in which the concern is overall lifecycle of the fashion product and not exclusively aesthetic and symbolic values strongly related with its ephemeral nature. The present work proposes the classification of textile products by means of an innovative label aiming to establish a rating related to the Life of Fashion Products, by using parameters considered with especial impact in lifecycle, as textile fibers, processing conditions, generated wastes, commercialization circuits, durability and cleaning procedures. This label for sustainable fashion products aims to assist the stakeholders with informed attitudes and correct decisions in order to promote the objectives of sustainable fashion near designers, consumers and industrial experts.

Um modelo de planeamento económico aplicado ao sector agro-alimentar em Portugal: utilização da análise multi-objectivos.

Doutoramento em Economia.