Biological colonization on majolica glazed tiles: biodeterioration, bioreceptivity and mitigation strategies

The impact of microbial activity on the deterioration of cultural heritage is a well-recognized global problem. Glazed wall tiles constitute an important part of the worldwide cultural heritage. When exposed outdoors, biological colonization and consequently biodeterioration may occur. Few studies have dealt with this issue, as shown in the literature review on biodiversity, biodeterioration and bioreceptivity of architectural ceramic materials. Due to the lack of knowledge on the biodeteriogens affecting these assets, the characterization of microbial communities growing on Portuguese majolica glazed tiles, from Pena National Palace (Sintra, Portugal) and another from Casa da Pesca (Oeiras, Portugal) was carried out by culture and molecular biology techniques. Microbial communities were composed of microalgae, cyanobacteria, bacteria and fungi, including a new fungal species (Devriesia imbrexigena) described for the first time. Laboratory-based colonization experiments were performed to assess the biodeterioration patterns and bioreceptivity of glazed wall tiles produced in laboratory. Microorganisms previously identified on glazed tiles were inoculated on pristine and artificially aged tile models and incubated under laboratory conditions for 12 months. Phototrophic microorganisms were able to grow into glaze fissures and the tested fungus was able to form oxalates over the glaze. The bioreceptivity of artificially aged tiles was higher for phototrophic microorganisms than pristine tile models. A preliminary approach on mitigation strategies based on in situ application of commercial biocides and titanium dioxide (TiO2) nanoparticles on glazed tiles demonstrated that commercial biocides did not provide long term protection. In contrast, TiO2 treatment caused biofilm detachment. In addition, the use of TiO2 thin films on glazed wall tiles as a protective coating to prevent biological colonization was analysed under laboratorial conditions. Finally, conservation notes on tiles exposed to biological colonization were presented.

Impactos territoriais de processos de cooperação transfronteiriça : caso de estudo : Elvas e Badajoz

A cooperação transfronteiriça é vista na União Europeia como um modelo de integração territorial e como uma alternativa para o desenvolvimento das regiões de fronteira, devido ao seu afastamento em relação aos grandes centros urbanos. No início da década de 90 foi lançado o programa do INTERREG tendo em vista a maior permeabilidade da fronteira e o desenvolvimento destes territórios, entre os quais o das regiões do Alto Alentejo e da Extremadura. A grande proximidade territorial entre Elvas e Badajoz permitiu desde sempre relações de cooperação mais ou menos intensas e consentidas, mesmo antes da abertura da fronteira, motivadas sobretudo pela diferença de valor entre as duas moedas. Contudo, com a entrada conjunta dos países ibéricos na CEE (1986), essas relações intensificaram-se ao nível do comércio, do emprego, do turismo, do lazer e da procura de serviços. Impactos territoriais como a procura e utilização conjunta de infraestruturas e de espaços públicos pelas populações das duas cidades, a promoção e realização de espetáculos culturais, a prática de cross-border shopping, a procura de uma segunda residência, em ambos os lados da fronteira, e a tendência para uma urbanização contínua no futuro, justificaram a criação da Eurocidade Elvas-Badajoz (2013). Esta iniciativa tem como principais objetivos promover a conceção, gestão e prestação conjunta de serviços, desenvolver projetos de cooperação em áreas de interesse comum, estimular a cooperação entre empresas e atrair investimentos geradores de novos postos de trabalho. No entanto os desafios para ambas as cidades prendem-se com a existência de um quadro jurídico e legal distinto que tem condicionado algumas das ações ou iniciativas e o desenvolvimento territorial conjunto ainda carece de uma proposta estratégica.

Sustentabilidade no Design: uma abordagem aos resíduos limpos das indústrias do calçado

Dissertação de mestrado em Design e Marketing

Ontological representation of tumor-node-metastasis classification and an ontology-driven classifier: a study on colorectal cancer

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Informática Médica)

Dispositivo de avaliação externa ao ensino superior: um estudo exploratório sobre acreditação à Universidade Nacional Timor Lorosa'e, 2008 – 2013

Dissertação de mestrado em Ciências da Educação (área de especialização em Avaliação)

A relação entre família e escola e a perspectiva de minimização das dificuldades comportamentais e cognitivas apresentadas por adolescentes com Síndrome do Alcoolismo Fetal (SAF): estudos de casos na cidade de Manaus

Dissertação de mestrado em Educação Especial (área de especialização em Dificuldades de Aprendizagem Específicas)

Los objetos técnicos y los organismos tecnificados. Reflexiones filosóficas, estéticas y políticas sobre la técnica. Technical objects and technified organisms. Philosophical, aesthetical and political approaches on technique

El presente proyecto se propone como parte inicial de una investigación sobre la relación entre naturaleza/cultura/técnica. Tradicionalmente la naturaleza y la cultura se han considerado como ámbitos diferenciados y opuestos. Y es en esta distinción donde la técnica adquiere un lugar central. El pensamiento occidental sobre la técnica ha recibido diversas interpretaciones: desde una subordinación con respecto al conocimiento verdadero (episteme) en la filosofía clásica, un optimismo sobre la técnica como posibilidad de dominación de la naturaleza en el Renacimiento y la Ilustración, y la ambigüedad y desasosiego romántico (Mitcham, 1979). Durante el siglo XX se distinguen dos posiciones antagónicas sobre la técnica. Por un lado, una actitud “crítica” donde pueden identificarse los trabajos de filósofs de diferentes tradiciones como Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) y la Escuela de Frankfurt. Por otro lado, una filosofía de la técnica “ingenieril” que consiste en el análisis de la tecnología como un paradigma de pensamiento y acción humana. Esta dicotomía ha sido interpretada por Eco como “apocalípticos e integrados”. Más allá de las mencionadas diferencias, lo que tienen en común ambas posiciones es que parten de una dicotomía entre cultura y naturaleza. Nuestra perspectiva rechaza esta dicotomía, por el contrario, evidenciamos una creciente imbricación entre ambas donde las fronteras entre una y otra se hacen difusas. La noción de “objeto técnico” propuesta por Simondon (2007) hace referencia a la inserción del objeto técnico en la cultura, donde debe reconocerse la “realidad humana” presente en el mismo. Ahora bien, esto no significa “humanizar el objeto técnico”, sino más bien indagar sobre el lugar que este ocupa en la cultura como también establecer su relación con la naturaleza. En el siglo XVII el hombre mismo es reinterpretado como máquina (La Mettrie, 2000). En la actualidad pueden identificarse dos tendencias en la concepción de la técnica: los «humanos-máquinas» y las «máquinas-humanas», en otras palabras, la disposición del humano hacia la máquina y la tendencia de la máquina hacia lo humano. No obstante, ambas posiciones siguen manteniendo una distinción taxonómica entre el cuerpo –o lo orgánico- y lo maquínico, lo que implica una consideración de esta relación de manera extrínseca. Frente a esta tensión Haraway propone el concepto de cyborg: «un organismo cibernético» (1995). Los desarrollos tecnológicos han producido una modificación tal en la vida de los seres orgánicos en los cuales ya no puede concebirse su cuerpo independientemente de la tecnología. Esto conduce a replantear la distinción entre “animales/hombres/máquinas”, entendiendo a los mismos como expresiones de naturaleza, cultura y tecnología respectivamente. Nuestra investigación parte de la hipótesis que la técnica diluye diferencias de orden natural y cultural a través de los objetos técnicos que son productos culturales. La estética se ocupa de la percepción sensible del mundo no puede eludir su dimensión técnica. Al margen de la crítica a la “Industria cultural” consideramos relevante la aproximación de Benjamin al problema de la técnica porque aborda la imbricación antes mencionada en el campo de la percepción. Según Benjamin la irrupción de la técnica al mismo tiempo que posibilita una estetización de la política que confluye en el fascismo como punto extremo también abre la posibilidad de desmontar la ideología del progreso infinito (1967). Una integración entre aproximaciones estéticas y políticas a la técnica Flusser (1983) propone la “caja negra” como metáfora de la técnica contemporánea. Su propuesta es la “apertura de la caja negra” que consiste en tomar conocimiento del funcionamiento del dispositivo. Nuestra propuesta de investigación aborda la técnica desde una consideración filosófica/estética/política, donde redefiniremos la técnica partiendo de la imbricación entre cultura y naturaleza. This project will set the basis for a sustained research on the relation nature/culture/technique. They have been traditionally considered as separate and even opposite fields. And it is on the brink of this distinction where technique plays a central role. In Western thought technique has received many interpretations since the beginnings of philosophy: from a subordination to true knowledge (episteme) in classic philosophy, or the optimism which sees in technique the possibility of dominating nature in the Renaissance and in the Enlightenment, to the Romantic ambiguity and uneasiness towards technological change (Mitcham, 1979). During the twentieth century two opposed approach on technique prevail. On one hand, a “critical” attitude such defines the work of philosophers of different traditions such as Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) and the Frankfurt School. On the other hand there is an “engineering” philosophy of technique that consists in the analisis of technology as a paradigm to understand human action and thought. Besides their differences, both positions have in common a dichotomy between nature and culture. We reject such dichotomy. On the contrary we consider there is a growing intertwinement between both which blurs the borders of the concepts. Simondon’s notion of “technical object” refers to the insertion of the technique in culture where the “human reality” in it must be recognised. This does not imply “humanising the technical object”, but investigate on the role it plays on culture and establishing its relation to nature. To articulate this relation we will work with unorthodox approaches on technique such as Benjamin (1967), Flusser (1983) and others. The hypothesis of our project is that the traditional distinction of “animal/man/machine” must be re-thought, therefore raising the question on the blurring line between nature, culture and technique and its effects in philosophy, politics and aesthetics.

Central and Cortical Gray Mater Segmentation of Magnetic Resonance Images of the Fetal Brain

Motivation. The study of human brain development in itsearly stage is today possible thanks to in vivo fetalmagnetic resonance imaging (MRI) techniques. Aquantitative analysis of fetal cortical surfacerepresents a new approach which can be used as a markerof the cerebral maturation (as gyration) and also forstudying central nervous system pathologies [1]. However,this quantitative approach is a major challenge forseveral reasons. First, movement of the fetus inside theamniotic cavity requires very fast MRI sequences tominimize motion artifacts, resulting in a poor spatialresolution and/or lower SNR. Second, due to the ongoingmyelination and cortical maturation, the appearance ofthe developing brain differs very much from thehomogenous tissue types found in adults. Third, due tolow resolution, fetal MR images considerably suffer ofpartial volume (PV) effect, sometimes in large areas.Today extensive efforts are made to deal with thereconstruction of high resolution 3D fetal volumes[2,3,4] to cope with intra-volume motion and low SNR.However, few studies exist related to the automatedsegmentation of MR fetal imaging. [5] and [6] work on thesegmentation of specific areas of the fetal brain such asposterior fossa, brainstem or germinal matrix. Firstattempt for automated brain tissue segmentation has beenpresented in [7] and in our previous work [8]. Bothmethods apply the Expectation-Maximization Markov RandomField (EM-MRF) framework but contrary to [7] we do notneed from any anatomical atlas prior. Data set &Methods. Prenatal MR imaging was performed with a 1-Tsystem (GE Medical Systems, Milwaukee) using single shotfast spin echo (ssFSE) sequences (TR 7000 ms, TE 180 ms,FOV 40 x 40 cm, slice thickness 5.4mm, in plane spatialresolution 1.09mm). Each fetus has 6 axial volumes(around 15 slices per volume), each of them acquired inabout 1 min. Each volume is shifted by 1 mm with respectto the previous one. Gestational age (GA) ranges from 29to 32 weeks. Mother is under sedation. Each volume ismanually segmented to extract fetal brain fromsurrounding maternal tissues. Then, in-homogeneityintensity correction is performed using [9] and linearintensity normalization is performed to have intensityvalues that range from 0 to 255. Note that due tointra-tissue variability of developing brain someintensity variability still remains. For each fetus, ahigh spatial resolution image of isotropic voxel size of1.09 mm is created applying [2] and using B-splines forthe scattered data interpolation [10] (see Fig. 1). Then,basal ganglia (BS) segmentation is performed on thissuper reconstructed volume. Active contour framework witha Level Set (LS) implementation is used. Our LS follows aslightly different formulation from well-known Chan-Vese[11] formulation. In our case, the LS evolves forcing themean of the inside of the curve to be the mean intensityof basal ganglia. Moreover, we add local spatial priorthrough a probabilistic map created by fitting anellipsoid onto the basal ganglia region. Some userinteraction is needed to set the mean intensity of BG(green dots in Fig. 2) and the initial fitting points forthe probabilistic prior map (blue points in Fig. 2). Oncebasal ganglia are removed from the image, brain tissuesegmentation is performed as described in [8]. Results.The case study presented here has 29 weeks of GA. Thehigh resolution reconstructed volume is presented in Fig.1. The steps of BG segmentation are shown in Fig. 2.Overlap in comparison with manual segmentation isquantified by the Dice similarity index (DSI) equal to0.829 (values above 0.7 are considered a very goodagreement). Such BG segmentation has been applied on 3other subjects ranging for 29 to 32 GA and the DSI hasbeen of 0.856, 0.794 and 0.785. Our segmentation of theinner (red and blue contours) and outer cortical surface(green contour) is presented in Fig. 3. Finally, torefine the results we include our WM segmentation in theFreesurfer software [12] and some manual corrections toobtain Fig.4. Discussion. Precise cortical surfaceextraction of fetal brain is needed for quantitativestudies of early human brain development. Our workcombines the well known statistical classificationframework with the active contour segmentation forcentral gray mater extraction. A main advantage of thepresented procedure for fetal brain surface extraction isthat we do not include any spatial prior coming fromanatomical atlases. The results presented here arepreliminary but promising. Our efforts are now in testingsuch approach on a wider range of gestational ages thatwe will include in the final version of this work andstudying as well its generalization to different scannersand different type of MRI sequences. References. [1]Guibaud, Prenatal Diagnosis 29(4) (2009). [2] Rousseau,Acad. Rad. 13(9), 2006, [3] Jiang, IEEE TMI 2007. [4]Warfield IADB, MICCAI 2009. [5] Claude, IEEE Trans. Bio.Eng. 51(4) (2004). [6] Habas, MICCAI (Pt. 1) 2008. [7]Bertelsen, ISMRM 2009 [8] Bach Cuadra, IADB, MICCAI 2009.[9] Styner, IEEE TMI 19(39 (2000). [10] Lee, IEEE Trans.Visual. And Comp. Graph. 3(3), 1997, [11] Chan, IEEETrans. Img. Proc, 10(2), 2001 [12] Freesurfer,http://surfer.nmr.mgh.harvard.edu.

R&D cooperation between Spanish firms and scientific partners: what is the role of tertiary education?

This paper explores the factors that determine firm’s R&D cooperation with different partners, paying special attention on the role of tertiary education (degree and PhDs level) in facilitating the connection between the firms and the to scientific bodies (technology centres, public research centres and universities). Here, we attempt to answer two questions. First, are innovative firms that carry out internal and external R&D activities more likely to cooperate on R&D projects with other partners? Second, do Spanish innovative firms with a high participation of researchers with degrees or PhDs tend to cooperate more with scientific partners? To answer both questions we apply a three-dimensional approach on a firm level Panel Data with a sample of 4.998 manufacturing and services Spanish firms. First, we run a complementary test between external R&D acquisition and skilled research workers and find that firms which carry out external R&D activities obtain a greater return on R&D cooperation when they have skilled workers in R&D, especially in high-tech manufactures and KIS services. Second, we carry out a 2-step tobit model to estimate, in the first stage, the determinants that explain whether Spanish innovative firms cooperate or not; and in the second stage the factors that affect the choice of partners. And third, we apply an ordered probit model to test the marginal effects of explanatory variables on the different partners. Here we contrast some of the most interesting empirical hypotheses of previous studies, and which emphasize the role of employees with degrees and PhDs in facilitating cooperative R&D between firms and scientific partners.

Community Development Health Network

The Community Development and Health Network (CDHN) aim to end health inequalities using a community development approach - campaigning, influencing policy and developing best practice work which shows that communities, both geographical and of interest & identity, can define their own health needs and design and implement preventative and radical solutions. It believes that health is affected by more than access to health services, individual lifestyle choices and our own genetic make-up. These other factors can include poverty, the environment, education, living and working conditions, housing, access to food and social and community networks. This resource is part of the Public Health Advocacy Website Collection.

Binary proposal for assessing quality of Open Access Institutional Repositories : the case of Spanish repositories

The reason for this study is to propose a new quantitative approach on how to assess the quality of Open Access University Institutional Repositories. The results of this new approach are tested in the Spanish University Repositories. The assessment method is based in a binary codification of a proposal of features that objectively describes the repositories. The purposes of this method are assessing the quality and an almost automatically system for updating the data of the characteristics. First of all a database was created with the 38 Spanish institutional repositories. The variables of analysis are presented and explained either if they are coming from bibliography or are a set of new variables. Among the characteristics analyzed are the features of the software, the services of the repository, the features of the information system, the Internet visibility and the licenses of use. Results from Spanish universities ARE provided as a practical example of the assessment and for having a picture of the state of the development of the open access movement in Spain.

Markov chain montecarlo method applied to rounding zeros of compositional data: first approach

As stated in Aitchison (1986), a proper study of relative variation in a compositional data set should be based on logratios, and dealing with logratios excludes dealing with zeros. Nevertheless, it is clear that zero observations might be present in real data sets, either because the corresponding part is completelyabsent –essential zeros– or because it is below detection limit –rounded zeros. Because the second kind of zeros is usually understood as “a trace too small to measure”, it seems reasonable to replace them by a suitable small value, and this has been the traditional approach. As stated, e.g. by Tauber (1999) and byMartín-Fernández, Barceló-Vidal, and Pawlowsky-Glahn (2000), the principal problem in compositional data analysis is related to rounded zeros. One should be careful to use a replacement strategy that does not seriously distort the general structure of the data. In particular, the covariance structure of the involvedparts –and thus the metric properties– should be preserved, as otherwise further analysis on subpopulations could be misleading. Following this point of view, a non-parametric imputation method isintroduced in Martín-Fernández, Barceló-Vidal, and Pawlowsky-Glahn (2000). This method is analyzed in depth by Martín-Fernández, Barceló-Vidal, and Pawlowsky-Glahn (2003) where it is shown that thetheoretical drawbacks of the additive zero replacement method proposed in Aitchison (1986) can be overcome using a new multiplicative approach on the non-zero parts of a composition. The new approachhas reasonable properties from a compositional point of view. In particular, it is “natural” in the sense thatit recovers the “true” composition if replacement values are identical to the missing values, and it is coherent with the basic operations on the simplex. This coherence implies that the covariance structure of subcompositions with no zeros is preserved. As a generalization of the multiplicative replacement, in thesame paper a substitution method for missing values on compositional data sets is introduced

Development of a Manual Crack Quantification and Automated Crack Measurment System, Project TR-457 Final Report, 2005

Final report produced by DOT on development of manual crack quantification and automatic crack measurment system.

Ricercando tra i Registri

My final project is to show the development of the language and the style of the double bass and its change of role through different influences. To accomplish this I decided to make an analytic overview of those double bass players that started to use a different and not traditional approach on the instrument. Later, I focused on the bassists and composers who influenced me the most in the latest period of my study career by partly analysing their playing and their composition. Another part of my work was concerned with creating a personal connection with those musicians, who I consider idols of mine. I did this through interviews, to try to understand their creative process on the instrument and in the composition and to deeply comprehend their personal point of view about the evolution of the double bass. At the same time my interest for the compositional aspect was growing together with the necessity to discover my own voice as a musician. Subsequently I made an analysis of my compositions to underline and to get conscious about my personal influences and evolution. Concluding from this, I have created a complete overview and deepened my understanding for the modern approach in Jazz double bass.

National Adaptation Programme of Action on Climate Change - 2008 - 2012

The archipelago of Cape Verde is made up of ten islands and nine islets and is located between latitudes 14º 28' N and 17º 12' N and longitudes 22º 40' W and 25º 22' W. It is located approximately 500 km from the Senegal coast in West Africa (Figure 1). The islands are divided into two groups: Windward and Leeward. The Windward group is composed of the islands of Santo Antão, São Vicente, Santa Luzia, São Nicolau, Sal and Boavista; and the Leeward group is composed of the islands Maio, Santiago, Fogo and Brava. The archipelago has a total land surface of 4,033 km2 and an Economic Exclusive Zone (ZEE) that extends for approximately 734,000 km2. In general, the relief is very steep, culminating with high elevations (e.g. 2,829 m on Fogo and 1,979 m on Santo Antão). The surface area, geophysical configuration and geology vary greatly from one island to the next. Cape Verde, due to its geomorphology, has a dense and complex hydrographical network. However, there are no permanent water courses and temporary water courses run only during the rainy season. These temporary water courses drain quickly towards the main watersheds, where, unless captured by artificial means, continue rapidly to lower areas and to the sea. This applies equally to the flatter islands. The largest watershed is Rabil with an area of 199.2 km2. The watershed areas on other islands extend over less than 70 km2. Cape Verde is both a least developed country (LDC) and a small island development state (SIDS). In 2002, the population of Cape Verde was estimated at approximately 451,000, of whom 52% were women and 48% men. The population was growing at an average 2.4% per year, and the urban population was estimated at 53.7 %. Over the past 15 years, the Government has implemented a successful development strategy, leading to a sustained economic growth anchored on development of the private sector and the integration of Cape Verde into the world economy. During this period, the tertiary sector has become increasingly important, with strong growth in the tourism, transport, banking and trade sectors. Overall, the quality of life indicators show substantial improvements in almost all areas: housing conditions, access to drinking water and sanitation, use of modern energy in both lighting and cooking, access to health services and education. Despite these overall socio-economic successes, the primary sector has witnessed limited progress. Weak performance in the primary sector has had a severe negative impact on the incomes and poverty risks faced by rural workers1. Moreover, relative poverty has increased significantly during the past decade. The poverty profile shows that: (i) extreme poverty is mostly found in rural areas, although it has also increased in urban areas; (ii) poverty is more likely to occur when the head of the household is a woman; (iii) poverty increases with family size; (iv) education significantly affects poverty; (v) the predominantly agricultural islands of Santo Antão and Fogo have the highest poverty rates; (vi) unemployment affects the poor more than the nonpoor; (vii) agriculture and fisheries workers are more likely to be poor than those in other sectors. Therefore, the fight against poverty and income inequalities remains one of the greatest challenges for Cape Verde authorities. The various governments of Cape Verde over the last decade have demonstrated a commitment to improving governance, notably by encouraging a democratic culture that guarantees stability and democratic changes without conflicts. This democratic governance offers a space for a wider participation of citizens in public management and consolidates social cohesion. However, there are some remaining challenges related to democratic governance and the gains must be systematically monitored. Finally, it is worth emphasizing that the country’s insularity has stimulated a movement to decentralized governance, although social inequalities and contrasts from one island to the next constitute, at the same time, challenges and opportunities.