Infrastructure facilities for deep-sea and off-shore fishing

The author presents a brief account of the infrastructure facilities required for the fishing industry. He describes those facilities presently available in Sri Lanka, and those that are under construction, and gives a few suggestions indicating the nature of infrastructure facilities that are vital to the local situation at its present stage of development. The principal facilities discussed are (1) fish landing places; (2) unloading handling facilities; (3) vessel servicing facilities; and (4) navigation aids.

Private sector to invest in off-shore fishing and to encourage the financial incentives to be introduced for deep-sea fishing in Sri Lanka

The author discusses the financial aspects of private sector investment in off-shore fishing, with particular attention to tax incentives, such as those offered to tourist hotels, which are considered applicable to the current case of fishing vessel purchase, and the operation of the vessels themselves, hiring, publicity and profitability. Tax incentives which were introduced to encourage investment in the tourist industry should be introduced to encourage investment in the fishing industry on the lines presented. It is essential that wide publicity be given for the incentives introduced so as to achieve the desired results.

Dem analysis of soil-pipeline interaction in sand under lateral and upward movements at deep embedment

The soil-pipeline interactions under lateral and upward pipe movements in sand are investigated using DEM analysis. The simulations are performed for both medium and dense sand conditions at different embedment ratios of up to 60. The comparison of peak dimensionless forces from the DEM and earlier FEM analyses shows that, for medium sand, both methods show similar peak dimensionless forces. For dense sand, the DEM analysis gives more gradual transition of shallow to deep failure mechanisms than the FEM analysis and the peak dimensionless forces at very deep depth are higher in the DEM analysis than in the FEM analysis. Comparison of the deformation mechanism suggests that this is due to the differences in soil movements around the pipe associated with its particulate nature. The DEM analysis provides supplementary data of the soil-pipeline interaction in sand at deep embedment condition.

Analysis of basic processes inside the keyhole during deep penetration ND-YAG CW laser welding

During laser welding, the keyhole is generated by the recoil pressure induced by the evaporation processes occurring mainly on the front keyhole wall (KW). In order to characterize the evaporation process, we have measured this recoil pressure by using a plume deflection technique, where the plume generated for static conditions (i. e. with no sample displacement) is deflected by a transverse side gas jet. From the measurement of the plume deflection angle, the recoil pressure can be determined as a function of incident intensity and sample material. From these data one can estimate the pressure generated on the front KW, during laser welding. Therefore, the corresponding dynamic pressure exerted by the vapor plume expansion on the rear KW, in contact with the melt pool, can be also estimated. These pressures appear to be in close agreement with those generated by an additional side jet that has been used in previous experiments, for stabilizing the observed melt pool oscillations or fluctuations.

Losses in inductor-less piezoelectric transformer ballast for compact fluorescent lamps

In this study an inductor-less piezoelectric transformer (PT) based ballast for a 5 W CFL has been designed and simulated. The predictions of circuit currents and losses closely match experimentally measured values. The total simulated loss figure was confirmed against practically determined losses using a precision mini-calorimeter. Using simulation to disaggregate the total loss figure, it is seen that the PT makes the largest contribution to the total losses in such ballast.

Sources of the deep water masses in the northern Red Sea

The hydrographic structure of the northern Red Sea indicated that, the surface waters of temperature around 22°C, salinity of 40.1OO%o and dt = 28.1 might sink to depths between 400-500 m by convective overturn, contributing to the formation of the mid-deep Red Sea waters. Below the 500 db depth down to the bottom the water column is stable. The geostrophic circulation clearly indicated an inflow of water from the Red Sea towards NNW, along the main axis of the sea. Arriving at the northern edge of the sea, it sends a branch in the Gulf of Aqaba, turns to the west, and sends another branch to the Gulf of Suez, but its main mass reaches the African coast where it sets southward along this coast. A large cyclonic gyre centered near 27 deg 30'N and 34 deg l0'E is detected at the head of the Red Sea deep waters. The effect of the outflow of the bottom water of the Gulf of Suez on the formation of the deep water of the Red Sea is limited.

Analysis of case histories on deep excavations in marine clay

Two case histories on deep excavation of marine clay are used to study the use of a decision-making tool based on a new deign method called the Mobilized Strength Design (MSD) method which allows the designer to use a simple method of predicting ground displacements during deep excavation. This application can approximately satisfy both safety and serviceability requirements by predicting stresses and displacements under working conditions by introducing the concept of "Mobilizable soil strength". The new method accommodates a number of features which are important to design of underground construction between retaining walls, including different deformation mechanism in different stages of excavation. The influence of wall depth, wall flexibility and stratified ground are the major focus of this paper. These developments should make it possible for a design engineer to take informed decisions on the influence of wall stiffness, or on the need for a jet-grouted base slab, for example, without having to conduct project-specific Finite Element Analysis.

Economic analysis of 22m and 23m deep sea trawlers

The cost-benefit analysis of 23m and 22m trawlers operated from Visakhapatnam base is presented. The study indicated that the deep sea fishing in Indian waters is a profitable venture. The profit over capital investment for a 23m trawler worked out to about 18% whereas the same was about 10% for a 22m trawler. Catch per trawling operation, cost of production, productivity per man year, energy yield etc. establish the economic superiority of 23m vessel.

Deep RNA sequencing at single base-pair resolution reveals high complexity of the rice transcriptome

Understanding the dynamics of eukaryotic transcriptome is essential for studying the complexity of transcriptional regulation and its impact on phenotype. However, comprehensive studies of transcriptomes at single base resolution are rare, even for modern organisms, and lacking for rice. Here, we present the first transcriptome atlas for eight organs of cultivated rice. Using high-throughput paired-end RNA-seq, we unambiguously detected transcripts expressing at an extremely low level, as well as a substantial number of novel transcripts, exons, and untranslated regions. An analysis of alternative splicing in the rice transcriptome revealed that alternative cis-splicing occurred in similar to 33% of all rice genes. This is far more than previously reported. In addition, we also identified 234 putative chimeric transcripts that seem to be produced by trans-splicing, indicating that transcript fusion events are more common than expected. In-depth analysis revealed a multitude of fusion transcripts that might be by-products of alternative splicing. Validation and chimeric transcript structural analysis provided evidence that some of these transcripts are likely to be functional in the cell. Taken together, our data provide extensive evidence that transcriptional regulation in rice is vastly more complex than previously believed.