Effect of Plastic Deformation on the Excess Loss of Electrical Steel

The interpretation of the effect of plastic deformation on the calculated excess loss component (anomalous-loss) supports the concept of loss separation. Magnetic losses and Barkhausen noise of nonoriented electrical steel sheets were measured on Epstein strips taken from a single coil of 0.8% Si nonoriented electrical steel. Sheets were extracted in the annealed condition, without any skin pass and with a grain size of 18 mu m. This material was cold rolled in order to obtain sets of samples with true strain from 2% up to 29%. X-ray diffraction was used to estimate the dislocation density. The analysis of magnetic properties was performed by Barkhausen noise measurements and also by analyzing the hysteresis loops obtained from Epstein frame measurements for different inductions and different frequencies (including the quasi-static regime for hysteresis loss measurements). These data allowed us to observe that most of the well known total loss increase with plastic deformation is due to an increase in the hysteresis loss component, while excess loss decreases to become negligible. This behavior can be explained if it is assumed that the plastic deformation lead to an increase in the number of domain walls per unit volume, thereby decreasing the excess loss. Barkhausen peak area increases with plastic deformation, reproducing results taken from samples of different silicon content.

Cruising for ocean conservation: no exactly a waste of time. Plastic pollution in the oceans

Grabación realizada por Ciencia compartida (Biblioteca Universitaria)

The interrelationship between monetary policy and the interbank money market during the financial crisis

Die vorliegende Dissertation besteht aus sechs Kapiteln und trägt zur Forschung in den Bereichen der Finanzmarktpolitik und der Geldpolitik bei. Das zweite Kapitel zeigt die Wechselbeziehung zwischen Geldmarktanspannungen und der Stabilität des Finanzsystems auf. Mittels der theoretischen Literatur werden verschiedene Einflussfaktoren einer aggregierten Liquiditätsnachfragefunktion präsentiert. Das dritte Kapitel untersucht den Informationsgehalt der Ergebnisse der Hauptrefinanzierungsgeschäfte für den europäischen Geldmarkt. Unsere Ergebnisse zeigen, dass sich seit der Finanzkrise der Informationsgehalt der Hauptrefinanzierungsgeschäfte in zweierlei Hinsicht verändert hat. Im vierten Kapitel untersuchen wir die Wirksamkeit der Geldpolitik während der Finanzkrise europäische Geldmarktzinssätze zu steuern. Die Ergebnisse deuten auf eine erhebliche Divergenz zwischen den Zinssätzen und den Erwartungen über die zukünftige Geldpolitik hin. Weiterhin finden wir heraus, dass die unkonventionellen Maßnahmen der EZB für einen Rückgang der Euriborsätze von bis zu 60 Basispunkten verantwortlich sind. Das fünfte Kapitel beschäftigt sich mit der Funktionsweise des besonderen geldpolitischen Instrumentariums der Schweizerischen Nationalbank.

Money is not enough: exploring the impact of social and cultural resources on youth health

Findings on socioeconomic health differentials in youth remain fragmented with the role of cumulative and interaction effects of different forms of health resources not well understood.

From Money Storage to Money Store: Openness and Transparency in Bank Architecture

In the middle of the twentieth century, banks changed from ‘closed’ designs signifying wealth, security, and safety to ‘open’ designs signifying hospitality, honesty, and transparency as the perception of money changed from a passive physical substance to be slowly accumulated to an active notational substance to be kept in motion. If money is saved, customers must trust that the bank is secure and their money will be there when they want it; if money is invested, customers must trust that it is being done openly and honestly and they are being well-advised. Architecture visually communicates that the institution can be trusted in the requisite way.

Anisotropy in plastic deformation of extruded magnesium alloy sheet during tensile straining at high temperature

Experimental measurements are used to characterize the anisotropy of flow stress in extruded magnesium alloy AZ31 sheet during uniaxial tension tests at temperatures between 350°C and 450°C, and strain rates ranging from 10-5 to 10-2 s-1. The sheet exhibits lower flow stress and higher tensile ductility when loaded with the tensile axis perpendicular to the extrusion direction compared to when it is loaded parallel to the extrusion direction. This anisotropy is found to be grain size, strain rate, and temperature dependent, but is only weakly dependent on texture. A microstructure based model (D. E. Cipoletti, A. F. Bower, P. E. Krajewski, Scr. Mater., 64 (2011) 931–934) is used to explain the origin of the anisotropic behavior. In contrast to room temperature behavior, where anisotropy is principally a consequence of the low resistance to slip on the basal slip system, elevated temperature anisotropy is found to be caused by the grain structure of extruded sheet. The grains are elongated parallel to the extrusion direction, leading to a lower effective grain size perpendicular to the extrusion direction. As a result, grain boundary sliding occurs more readily if the material is loaded perpendicular to the extrusion direction.

Retention force of plastic clips on implant bars: a randomized controlled trial

Retention of overdentures is important for patients' satisfaction. The study tested whether the clinical performance of retentive clips made of poly-ether-ether-ketone (PEEK) is superior to those made of poly-oxy-methylene (POM).