Polymerization shrinkage stress of composites photoactivated by different light sources

The purpose of this study was to compare the polymerization shrinkage stress of composite resins (microfilled, microhybrid and hybrid) photoactivated by quartz-tungsten halogen light (QTH) and light-emitting diode (LED). Glass rods (5.0 mm x 5.0 cm) were fabricated and had one of the surfaces air-abraded with aluminum oxide and coated with a layer of an adhesive system, which was photoactivated with the QTH unit. The glass rods were vertically assembled, in pairs, to a universal testing machine and the composites were applied to the lower rod. The upper rod was placed closer, at 2 mm, and an extensometer was attached to the rods. The 20 composites were polymerized by either QTH (n=10) or LED (n=10) curing units. Polymerization was carried out using 2 devices positioned in opposite sides, which were simultaneously activated for 40 s. Shrinkage stress was analyzed twice: shortly after polymerization (t40s) and 10 min later (t10min). Data were analyzed statistically by 2-way ANOVA and Tukey's test (a=5%). The shrinkage stress for all composites was higher at t10min than at t40s, regardless of the activation source. Microfilled composite resins showed lower shrinkage stress values compared to the other composite resins. For the hybrid and microhybrid composite resins, the light source had no influence on the shrinkage stress, except for microfilled composite at t10min. It may be concluded that the composition of composite resins is the factor with the strongest influence on shrinkage stress.

In vitro study of the pulp chamber temperature rise during light-activated bleaching

This study evaluated in vitro the pulp chamber temperature rise induced by the light-activated dental bleaching technique using different light sources. The root portions of 78 extracted sound human mandibular incisors were sectioned approximately 2 mm below the cementoenamel junction. The root cavities of the crowns were enlarged to facilitate the correct placing of the sensor into the pulp chamber. Half of specimens (n=39) was assigned to receive a 35% hydrogen peroxide gel on the buccal surface and the other halt (n=39) not to receive the bleaching agent. Three groups (n=13) were formed for each condition (bleach or no bleach) according to the use of 3 light sources recommended for dental bleaching: a light-emitting diode (LED)laser system, a LED unit and a conventional halogen light. The light sources were positioned perpendicular to the buccal surface at a distance of 5 mm and activated during 30 s. The differences between the initial and the highest temperature readings for each specimen were obtained, and, from the temperature changes, the means for each specimen and each group were calculated. The values of temperature rise were compared using Kruskal-Wallis test at 1% significance level. Temperature rise varied significantly depending on the light-curing unit, with statistically significant differences (p<0.01) among the groups. When the bleaching agent was not applied, the halogen light induced the highest temperature rise (2.38±0.66ºC). The LED unit produced the lowest temperature increase (0.29±0.13ºC); but there was no significant difference between LED unit and LED-laser system (0.35±0.15ºC) (p>0.01). When the bleaching agent was applied, there were significant differences among groups (p<0.01): halogen light induced the highest temperature rise (1.41±0.64ºC), and LED-laser system the lowest (0.33±0.12ºC); however, there was no difference between LED-laser system and LED unit (0.44±0.11ºC). LED and LED-laser system did not differ significantly from each other regardless the temperature rise occurred with or without bleaching agent application. It may be concluded that during light-activated tooth bleaching, with or without the bleaching agent, halogen light promoted higher pulp chamber temperature rise than LED unit and LED-laser system. The tested light-curing units provided increases in the pulp chamber temperature that were compatible with pulpal health.

Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing

This study evaluated in vitro the shear bond strength (SBS) of a resin-based pit-and-fissure sealant [Fluroshield (F), Dentsply/Caulk] associated with either an etch-and-rinse [Adper Single Bond 2 (SB), 3M/ESPE] or a self-etching adhesive system [Clearfil S3 Bond (S3), Kuraray Co., Ltd.] to saliva-contaminated enamel, comparing two curing protocols: individual light curing of the adhesive system and the sealant or simultaneous curing of both materials. Mesial and distal enamel surfaces from 45 sound third molars were randomly assigned to 6 groups (n=15), according to the bonding technique: I - F was applied to 37% phosphoric acid etched enamel. The other groups were contaminated with fresh human saliva (0.01 mL; 10 s) after acid etching: II - SB and F were light cured separately; III - SB and F were light cured together; IV - S3 and F were light cured separately; V - S3 and F were light cured simultaneously; VI - F was applied to saliva-contaminated, acid-etched enamel without an intermediate bonding agent layer. SBS was tested to failure in a universal testing machine at 0.5 mm/min. Data were analyzed by one-way ANOVA and Fisher's test (α=0.05).The debonded specimens were examined with a stereomicroscope to assess the failure modes. Three representative specimens from each group were observed under scanning electron microscopy for a qualitative analysis. Mean SBS in MPa were: I-12.28 (±4.29); II-8.57 (±3.19); III-7.97 (±2.16); IV-12.56 (±3.11); V-11.45 (±3.77); and VI-7.47 (±1.99). In conclusion, individual or simultaneous curing of the intermediate bonding agent layer and the resin sealant did not seem to affect bond strength to saliva-contaminated enamel. S3/F presented significantly higher SBS than the that of the groups treated with SB etch-and-rinse adhesive system and similar SBS to that of the control group, in which the sealant was applied under ideal dry, noncontaminated conditions.

Influence of light-curing unit systems on shear bond strength and marginal microleakage of composite resin restorations

The aim of the present study was to evaluate the influence of different photopolymerization (halogen, halogen soft-start and LED) systems on shear bond strength (SBS) and marginal microleakage of composite resin restorations. Forty Class V cavities (enamel and dentin margins) were prepared for microleakage assessment, and 160 enamel and dentin fragments were prepared for the SBS test, and divided into 4 groups. Kruskal-Wallis and Wilcoxon tests showed statistically significant difference in microleakage between the margins (p < 0.01) with incisal margins presenting the lowest values. Among the groups, it was observed that, only at the cervical margin, halogen soft-start photo polymerization presented statistically significant higher microleakage values. For SBS test, ANOVA showed no statistical difference (p > 0.05) neither between substrates nor among groups. It was concluded that Soft-Start technique with high intensity end-light influenced negatively the cervical marginal sealing, but the light-curing systems did not influence adhesion.

Composite resin color stability: influence of light sources and immersion media

OBJECTIVE: This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. MATERIAL AND METHODS: Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). RESULTS: High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus - ΔE=2.05; XL 3000 - ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. CONCLUSION: There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Influence of light and temperature on seed germination of Cereus pernambucensis Lemaire (Cactaceae)

The objective of the present study was to evaluate the effects of light and temperature on germination of Cereus pernambucensis seeds, a species of columnar cactus native to Brazil and naturally incident in the restinga. Cereus pernambucensis seeds were incubated under different temperatures, from 5 to 45 °C, with 5 °C intervals, and under alternating temperatures of 15-20 °C, 15-30 °C, 20-25 °C, 20-30 °C, 20-35 °C, 25-30 °C, 25-35 °C, and 30-35 °C, both under continuous white light and dark. The seeds were also incubated in a gradient of phytochrome photoequilibrium at 25 °C. The highest percentage germination in this species was between 25 and 30 °C. The minimum temperature was between 15 and 20 °C and the maximum between 35 and 40 °C. Alternating temperatures did not affect the percentage of seed germination, but it did alter the rate and synchronization indexes. Seeds incubated in the dark did not germinate under any of the conditions tested, indicating that this species when cultivated present light sensitive seeds controlled by phytochrome. The seeds can tolerate a lot of shade conditions, germinating under very low fluence response of phytochrome.

Histomorfometria das meninges encefálicas de ratos Wistar em diferentes faixas etárias

O desenvolvimento do sistema nervoso é bastante complexo, existindo poucos estudos sobre a organização dos envoltórios cerebrais relacionados ao crescimento encefálico. Utilizando como modelo experimental o rato, analisaram-se os diferentes aspectos estruturais e morfométricos da paquimeninge e leptomeninge durante o processo de envelhecimento. Foram utilizados quatro grupos de ratos em diferentes faixas etárias e analisadas as meninges em microscopias de luz e eletrônica. Verificamos que o grupo de ratos adultos apresentou uma maior área de fibras colágenas tanto do tipo I e quanto do tipo III, em relação aos outros grupos. Encontramos também que as fibras colágenas do tipo III em todos os grupos analisados ocupam uma maior área quando comparados com as fibras do tipo I. Os resultados revelam que a coloração de Weigert Oxona, que mostra fibras elásticas, elaunínicas e oxitalânicas, apresentou uma diferença estatisticamente maior de fibras quando comparados com as colorações de Weigert e Verhoeff, que mostra fíbras elaunínicas e elásticas, respectivamente. Os resultados ultra-estruturais demonstraram a presença de muitos fibroblastos e mitocôndrias tanto na paquimeninge como nas leptomeninges dos grupos de ratos neonatos e adultos, indicativo de alta atividade celular e conseqüentemente, intensa formação de tecido conjuntivo. Como as fibras colágenas do tipo III atuam na manutenção da estrutura de tecidos delicados e expansíveis, o estudo mostra que as funções das meninges encefálicas não estão relacionadas apenas com a resistência a trações e tensões a que estão sujeitas o encéfalo. Mas também a função relacionada com a distensibilidade dos vasos meníngeos e cerebrais de acordo com a necessidade do aporte sanguíneo em diversas funções específicas regionais do tecido nervoso.

Phlebotomines (Diptera, Psychodidae) in the Speleological Province of the Ribeira Valley: 3. Serra district - area of hostels for tourists who visit the Parque Estadual do Alto Ribeira (PETAR), state of São Paulo, Brazil

Phlebotomines (Diptera, Psychodidae) in the Speleological Province of the Ribeira Valley: 3. Area of hostels for tourists who visit the Parque Estadual do Alto Ribeira (PETAR), state of São Paulo, Brazil. The study characterizes some ecological aspects of the phlebotomine fauna in an endemic area of cutaneous leishmaniasis (CL) situated in the Serra district, Iporanga municipality where the hostels for tourists visiting the PETAR are located. Captures were undertaken on a smallholding and a small farm situated near the hostels, monthly between January/2001 and December/2003 with automatic light traps (ALT) in pigsty, hen-house and veranda of a domicile at the two sites, and in peridomicile of the small farm also with black/white Shannon traps. With the ALT a total of 87,224 phlebotomines representing 19 species and also two hybrids of Nyssomyia intermedia (Lutz & Neiva) and Nyssomyia neivai (Pinto) and two anomalous specimens were captured. The standardized index species abundance was for Ny. intermedia = 1.0 and Ny. neivai = 0.935. The highest frequencies of the smallholding occurred in the pigsty, the Williams' mean/capture for Ny. intermedia being 63.7 specimens and for Ny. neivai 29.2, and on the small farm, in the hen-house, Ny. intermedia 402.6 and Ny. neivai 116.2. A total of 863 phlebotomines (Ny. intermedia: 75.4%; Ny. neivai: 24.3%) were captured with black/white Shannon traps; females of both species being predominant in the white trap. The high frequencies of Ny. intermedia and Ny. neivai, both implicated in CL transmission, indicate the areas presenting risk of the disease.

Phlebotomines (Diptera, Psychodidae) in the Speleological Province of the Ribeira Valley: 2. Parque Estadual do Alto Ribeira (PETAR), São Paulo State, Brazil

The Parque Estadual do Alto Ribeira (PETAR) with about 250 caves, in an Atlantic forest reserve, is an important ecotourist attraction in the Ribeira Valley, an endemic area of American cutaneous leishmaniasis (ACL). With the purpose of investigating Leishmania vector species bothersome to humans the sandfly fauna was identified and some of its ecological aspects in the Santana nucleus, captures were undertaken monthly with automatic light traps in 11 ecotopes, including caves, forests, a camping site and domiciliary environments, and on black and white Shannon traps, from January/2001 to December/2002. A total of 2,449 sandflies representing 21 species were captured. The highest values of abundance obtained in the captures with automatic light traps were for Psathyromyia pascalei and Psychodopygus ayrozai. A total of 107 specimens representing 13 species were captured on black (12 species) and white (6 species) Shannon traps set simultaneously. Psychodopygus geniculatus females predominated on the black (43.75%), and Psathyromyia lanei and Ps. ayrozai equally (32.4%) on the white. Nyssomyia intermedia and Nyssomyia neivai, both implicated in the transmission of ACL in the Brazilian Southeastern region, were also captured. Ny. intermedia predominated in the open camping area. Low frequencies of phlebotomines were observed in the caves, where Evandromyia edwardsi predominated Lutzomyia longipalpis, the main vector of the American visceral leishmaniasis, was aslo present. This is its most southernly reported occurrence in the Atlantic forest.

Phlebotomines (Diptera, Psychodidae) in the Ribeira Valley Speleological Province - 1. Parque Estadual Intervales, state of São Paulo, Brazil

The identification of the sandfly fauna and investigation of some ecological aspects of its populations in areas frequented by tourists of the PEI, an Atlantic forest reserve with many caves, were the objective of this study. Captures were undertaken monthly from January 2001 to December 2002, with automatic light traps installed in 13 ecotopes, including caves, forests, domiciliary and peridomiciliary environments, and by aspiration in armadillo burrows. Additionally, although not at regular intervals, Shannon traps were installed in forests and anthropic environments, aspirations were made on cave walls, among roots and fallen leaves, and some insects were captured while biting researchers. A total of 891 sandflies belonging to 21 species were captured. Six hundred specimens representing 19 species were captured with light traps, 215 in anthropic (2.24 insects/trap) and 385 in extra-domiciliary (1.46 insects/trap) environments. Brumptomyia troglodytes was the most abundant species (the Standardised Index of Species Abundance = 0.705). Pintomyia monticola predominated in the Shannon traps and showed anthropophilic and diurnal activity. Psathyromyia pascalei predominated in the aspirations; the largest number being in armadillo burrows. Eleven species were captured in caves; although some might be troglophiles, the majority used these ecotopes as resting places. Nyssomyia intermedia, Nyssomyia neivai and Migonemyia migonei, implicated in the transmission of cutaneous leishmaniasis in the Southeastern Brazilian region, were all found, though in such low densities as to suggest minimal risk of the disease in the PEI.

The effects of the experimental infection from a focus of transmission of Schistosoma mansoni in a population of Biomphalaria tenagophila (D'Orbigny, 1835) in the region of "Vale do Ribeira de Iguape", Brazil

To observe the effects of the parasitic infection on the biology of B. tenagophila, field and laboratory populations of this mollusk from Itariri, in Vale do Ribeira, Brazil, were experimentally infected. Each mollusk received 10 miracidia of Schistosoma mansoni (SJ lineage) and was observed throughout the parasite's development. The biological variables were compared according to the criteria "group" and "infectious phase". The main damage caused by the parasitic infection manifested itself in reproduction, longevity and lesions on the shell of the mollusks in the patent phase. An infection rate of 58.8% was observed. Microanatomical study of the mollusk's digestive gland and ovotestis revealed the presence of evolving larval forms and cercariae. It was concluded that the effects of the parasitic infection on both populations were moderate, despite the low survival rate of the infected mollusks, the damage did not prevent either reproduction or the elimination of cercariae, which continued for a long time.

American cutaneous leishmaniasis in the Pontal of Paranapanema - SP, Brazil: ecological and entomological aspects

American cutaneous leishmaniasis (ACL) occurs in epidemic outbreaks and in sporadic cases with small annual variation in the Pontal of Paranapanema, SP. There is little research on the sandfly fauna of this region. The last outbreaks were related to the Movement of the Landless Workers (MST) and with the ecological tourism in preserved forest of the Parque Estadual do Morro do Diabo (PEMD). AIM: identification of the sandfly fauna within the PEMD, mainly anthropophilic species already incriminated as vectors of ACL, as well as their seasonality, hourly frequency and data of the behavior. M&M: The captures were undertaken with CDC light and Shannon traps from 6:00 pm to 10:00 pm, monthly from May 2000 to December 2001. The temperature and relative humidity data were registered at hourly intervals. RESULTS: The captured species were: Brumptomyia brumpti, Nyssomyia neivai, Nyssomyia whitmani, Pintomyia fischeri and Pintomyia pessoai. The P. pessoai predominated (34.39%) and N. neivai was less found (0.74%), only being captured in CDC traps. Shannon trap captured more sandflies (63.01%) than the CDC traps (36.99%). Despite the environmental degradation anthropophilic species, indicates favorable bioecological conditions for persistence of vectors and potential transmission of leishmaniasis.

Epidemiological study on leishmaniasis in an area of environmental tourism and ecotourism, State of Mato Grosso do Sul, 2006-2007

The aims of this study were to carry out a serological survey of canine leishmaniasis and identify the phlebotomine fauna in the urban area of Bonito, Mato Grosso do Sul. The serological survey was conducted on a sample of 303 dogs, by means of the indirect immunofluorescence test. Phlebotomines were captured using automated light traps. The serological survey found that 30% of the dogs were seropositive, both from the center and from all districts of the town. A total of 2,772 specimens of phlebotomines were caught and the species most found was Lutzomyia longipalpis (90.4%), which corroborated its role as the vector of for canine visceral leishmaniasis in the region. Phlebotomines of the species Bichromomyia flaviscutellata (the main vector for Leishmania (Leishmania) amazonensis) and Nyssomyia whitmani (the vector for Leishmania (Viannia) brasiliensis) were also caught. The findings indicate the need for continuous epidemiological surveillance, with attention towards diminishing the vector breeding sites and the transmission of these diseases in that region.

Lutzomyia longipalpis (Diptera, Psychodidae) em Cuesta Basáltica, na bacia hidrográfica do Rio Corumbataí, Região Centro-leste do Estado de São Paulo

A incidência das leishmanioses tegumentar e visceral americanas, em especial esta última (LVA), em hospedeiros caninos e humanos, encontra-se em crescente processo de expansão no Estado de São Paulo. Para a vigilância epidemiológica dessas endemias, torna-se fundamental o conhecimento da distribuição e da ecologia das diferentes espécies da fauna flebotomínea vetoras. Assim, a divulgação de novos encontros de seus vetores, sobretudo da Lutzomyia longipalpis, o principal vetor da LVA, é fundamental para apontar novas áreas de risco para a transmissão dessas doenças. Neste estudo, capturas de flebotomíneos foram realizadas em ambiente domiciliar, peridomiciliar e de mata, em diferentes localidades rurais dos municípios de Ipeúna e Itirapina, entre outubro de 2001 e fevereiro de 2004. Foram utilizadas armadilhas luminosas automáticas do tipo CDC, das 18h às 8h, em 14 noites, resultando 420 horas de exposição. Foram capturados 177 flebotomíneos pertencentes a doze espécies. A espécie mais abundante, Nyssomyia neivai, apontada como a principal vetora de LTA no Estado, contribuiu com 85,4% dos espécimes capturados em Ipeúna. O encontro de Lutzomyia longipalpis em uma caverna em Itirapina, aponta para o risco de estabelecimento da LVA na área e a necessidade de mais estudos locais sobre sua ecologia, sobretudo em relação à ocupação de ambientes antrópicos.

On the interference of clinical outcome on rabies transmission an perpetuation

Rabies is a viral zoonotic infectious disease that affects mammals and is caused by genotypes/species of the Lyssavirus genus (Rhabdoviridae, Mononegavirales), with the genotype 1 (classic rabies virus - RABV) being the most prevalent. Despite continuous efforts, rabies is still an incurable disease that causes thousands of deaths amongst humans worldwide. Due to a wide range of hosts and the different evolutionary paths of RABV in each host, several host-specific variants have arisen in an ongoing process. The result of RABV replication in nervous tissues may lead to two opposite clinical outcomes, i.e., paralytic/dumb form and encephalitic/furious one. The paralytic form creates dead-end hosts mainly amongst herbivores, while the furious form of the disease allows for augmented transmission when manifested in gregarious carnivores, as their natural aggressive behavior is accentuated by the disease itself. The aim of this article is to propose a theoretical model intended to explore how the rabies virus intrinsically modulates the immune system of different host classes, the pathological changes that the virus causes in these animals and how these elements favor its own perpetuation in nature, thus providing a basis for better prediction of the patterns this disease may present.