Synthesis of isotope-labelled methoxypyrazine compounds as internal standards and quantitative determination of aroma methoxypyrazines in water and wines by solid-phase extraction with isotope dilution-GC-MS /

An efficient way of synthesizing the deuterium labelled analogues of three methoxypyrazine compounds: 2-d3-methoxy-3-isopropylpyrazine, 2-d3-methoxy-3- isobutylpyrazine, and 2-d3-methoxy-3-secbutylpyrazine, has been developed. To confirm that the deuterium labels had been incorporated into the expected positions in the molecules synthesized, the relevant characterization by NMR, HRMS and GC/MS analysis was conducted. Another part of this work involved quantitative determination of methoxypyrazines in water and wines. Solid-phase extraction (SPE) proved to be a suitable means for the sample separation and concentration prior to GC/MS analysis.Such factors as the presence of ethanol, salt, and acid have been investigated which can influence the recovery by SPE for the pyrazines from the water matrix. Significantly, in this work comparatively simple fractional distillation was attempted to replace the conventional steam distillation for pre-concentrating a sample with a relatively large volume prior to SPE. Finally, a real wine sample spiked with the relevant isotope-labelled methoxypyrazines was quantitatively analyzed, revealing that the wine with 10 beetles per litre contained 138 ppt of 2-methoxy-3-isopropylpyrazine. Interestingly, we have also found that 2-methoxy-3-secbutylpyrazine exhibits an extremely low detection limit in GC/MS analysis compared with the detection limit of the other two methoxypyrazines: 2- methoxy-3-isopropylpyrazine and 2-methoxy-3-isobutylpyrazine.

Co-operative education and the development of self-esteem, an internal locus of control and work habits

This study compared approximately 50 grade 12 students studying In th~ co-operative education mode with approximately 50 grade 12 students studying in a traditional English course. Measures of self-esteem, locus of control and work habits were compared before and at the conclusion of one semester's involvement in the different programs. Using Coopersmith's Self-Esteem Inventory, the students who had chosen to study in the co-operative education mode scored significantly higher than the students in the traditional course. At the end of the semester, the co-operative education students' scores remained significantly higher than the English students'. Although the test showed no sjgnifi~ant changes in self-esteem. anecdotal reports indicated that co-operative education students had increased self-esteem over the semester. No significant differences in locus of control were observed between the two groups at any time. Significant differences in work habits were observed. While both groups had the same number of absences and the same marks before taking these courses, students who were involved in co-operative education had significantly fewer absences and significantly higher marks than the students studying in the traditional course. Anecdotal reports also indicated an improv~ment in work habits for students who had been involved in co-operative education. Recommendations of the study are for further research to determine more exactly how self-esteem and work habits develop in co-operative education students. Also. students. parents, teachers. and administrators need to be made aware of the success of this program.

Letter Discussing the Parliamentary Act to Regulate the Curing, Packing, and Inspection of Beef and Pork. 1819

A letter on behalf of Sir Peregrine Maitland, the Lieutenant Governor of Upper Canada to those in Niagara discussing an act passed in parliament regulating the curing, packing and inspection of beef and pork. The letter also states that William Duff Miller was appointed as an Inspector of Beef and Pork within the District of Niagara.

Drivers of Local Firms’ Focus on Internal R&D in Emerging Economies and Their International Performance

Grounded on the resource-based view of the firm, the study of this thesis investigates the effect of four internal and external factors – engineer intensity, location, affiliation with the government, government funding – on Chinese firms’ decision to either invest in internal R&D activities or external R&D and the effect of this decision on the firms’ international market success. In addition, the moderating role of the presence of foreign firms in China is examined. To understand these relationships, the thesis’ theorization focuses on the issue of how firms can combine optimally the two options – “internal R&D” and “external R&D”. In this regard I juxtapose internal R&D and external R&D and compare their advantages and disadvantages. To test my model, I apply panel data from the Annual Industrial Survey Database provided by the Chinese National Bureau of Statistics. My results show that three of the four investigated factors affect Chinese firms’ resource allocation decisions; and effective resource allocation decisions lead effectively to international market success, strengthened by the presence of foreign firms in China. Moreover the findings bear several theoretical and managerial contributions. First I propose the last dimension of the “VRIO framework” – “organization” – as an endogenous component of the VRIO framework, as my study investigated how firms can effectively combine resources to generate a competitive advantage in terms of international market success. Previous academic literature so far focused on examining whether internal and external R&D are complements or substitutes. My study fills a gap in the literature by investigating the determinants of the efficient combination of the two strategies and the outcome of the combination. One of the managerial implications is that Chinese firms can learn from foreign companies that are present in China.

Efecto del CIDR (Controlled Internal Drug Release) aplicado después de la inseminación artificial sobre la tasa de preñez en vacas de carne.

Tesis (Maestro en Ciencias Veterinarias) UANL, 2009.

Public Reason that Speaks to People : Iris Marion Young and the Problem of Internal Exclusion

Dossier : In Memoriam, Iris Marion Young (1949-2006)

Effect of curing temperature , fibre loading and bonding agent on the equilibrium swelling of isora-natural rubbercomposites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.

A Novel Accelerator Combination for the Low Temperature Curing of Silica-Filled NBR Compounds

Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. The effect of these xanthates in combination with zinc diethyldithiocarbamate (ZDC) on the vulcanization of silica-filled NBR compounds has been studied at different temperatures. The cure times of these compounds were compared with that of NBR compounds containing tetramethylthiuram disulphide/dibenzthiazyl disulphide. The rubber compounds with the xanthates and ZDC were cured at various temperatures from 60 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, compression set, abrasion resistance, flex resistance, heat buildup, etc. were evaluated. The properties showed that zinc salt of xanthate/ZDC combination has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Low Temperature Curing of NBR for Property Improvement

Zinc salts of ethyl, isopropyl, and butyl xanthates are prepared in the laboratory, and the effect of these xanthates with zinc diethyl dithiocarbamate (ZDC) on the vulcanization of HAF-filled nitrile butadiene rubber (NBR) compounds has been studied at different temperatures. The cure times of these compounds have been compared with that of NBR compounds containing TMTD/MBTS. The rubber compounds with the three xanthate accelerators and ZDC are cured at various temperatures from 60 to 150°C. The sheets are molded and properties such as tensile strength, tear strength, cross-link density, elongation at break, compression set, abrasion resistance, flex resistance, etc. have been evaluated. The properties show that zinc salt of the xanthate/ZDC accelerator system has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Tribasic Lead Sulphate as Efficient Curing Agent for Polychloroprene

Tribasic lead sulphate is tried as a practical curing agent for polychloroprene. The cure characteristics of the compounds as well as the technical properties of the vulcanizates show that it can act as a potential curative.

Effect of Blending Techniques on the Curing of Elastomer Blends

Compounding of styrene-butadiene copolymer/polybutadiene , natural rubber/ ethylene-propylene-diene terpolymer and natural rubber/butadiene-acrylonitrile copolymer blends was done in three different ways and their curing behaviour and the tensile properties of the es are compared.

Xanthate Accelerators for Low Temperature Curing of Natural Rubber

ABSTRACT: Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. They were purified by reprecipitation and were characterized by IR, NMR, and thermogravimetric analysis techniques. The melting points were also determined. The rubber compounds with different xanthate accelerators were cured at temperatures from 30 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, and modulus at 300% elongation were evaluated. The properties showed that all three xanthate accelerators are effective for room temperature curing.

Studies on the curing of short polyester fiber-polyurethane elastomer composite with different interfacial bonding agents

The cure characteristics of short fiber-polyurethane elastomer were studied with respect to different fiber-matrix bonding agents. A hexamethylenetetramine- resorcinol -hydrated silica based bonding agent was found to affect the stability of the composite. A new bonding agent, TP resin, based on polymeric toluenediisocyanate and polypropylene glycol has been developed. Cure characteristics of the composite with and without TP resin at different fiber loadings were also compared. Minimum torque, scorch time and optimum cure time increased with fiber content. Maximum torque was consistently higher with TP resin at all fiber loadings.