Värdering av kriterier vid stora investeringar : En jämförelse mellan olika intressenters uppskattningar av kriterier

In what way does different stakeholders assess a decision and its consequences, and how do these assessments differ? When a company stands before a big decision, they need to consider aspects that are economic, ecologic and social. To make a good decision they need to consider the society and its different stakeholder groups. This study examined how different groups values and weights different criteria. The study has been done with the project Sundsvall logistics park as a case, with criteria related to that project. The goal of the study was to find a way to value and weight different criteria and then compare how the company and the stakeholders assesses these criteria. This has been done through interviews with relevant people that has got extra knowledge about the project Sundsvall logistics park, and through a survey that has been sent out to residents of Sundsvall. The informants and respondents got to assess values and weights to the criteria relative to an indirect alternative where the logistics park isn’t built. The data was then compiled using multi attribute utility theory as a tool to present the comparison. The result of the study suggests that the differences between the valuations and weightings of the criteria is partly due to an uncertainty in how the logistics park would affect the criteria, but that the biggest reason probably depends on what perspective the person is viewing the logistics park from. If the person is viewing the logistics park from an industrial perspective, the criteria related to industrial development is getting more important and is going to take up more room in the analysis. If the person is viewing the logistics park from an individual and social perspective, the criteria related to that is more important and takes up more room in the analysis.

Território de Urbanização Difusa

A presente dissertação constitui o culminar do Mestrado Integrado em Arquitetura e Urbanismo, da Universidade Fernando Pessoa – Porto. Tem como objeto de estudo a indústria em Território de Urbanização Difusa, sendo o objetivo maior a sua compreensão através, principalmente, da relação entre a dispersão industrial e as diretrizes de ocupação determinadas pelos planos de ordenamento do território, no contexto do concelho. Com este intuito foram analisadas quatro zonas que abrangem parte das freguesias de Gandra, Rebordosa, Lordelo, Vilela, Sobrosa e Duas Igrejas, localizadas no noroeste do concelho de Paredes, as quais se observaram num período cronológico delimitado entre 1947 e 2011. Trata-se de um território de grande complexidade onde existe uma multifuncionalidade de espaços. Caracteriza-se, fundamentalmente, por uma ocupação difusa/dispersa, tendo como suporte a rede de estradas e caminhos públicos em que a atividade industrial predomina nas mais diversas dimensões, desde as zonas industriais aquela inserida nos aglomerados residenciais de cariz familiar. Esta dispersão intensificou-se ao longo do séc. XX, com a fixação dispersa das indústrias que promoveram o desenvolvimento de um modelo de economia familiar que se reflete no território. A implementação do Planeamento formal, em finais desse século, virá estabelecer regras que ainda assim parecem insuficientes para controlar os aspetos mais negativos das opções individuais pré-plano. Na verdade, o atual modelo de implantação industrial levanta muitas preocupações no que concerne à preservação das estruturas “verdes”, podendo vir a comprometer, no futuro, a sustentabilidade ambiental e ecológica deste território. Será com algumas breves reflexões a este propósito, após repassar as questões principais do trabalho, que o terminaremos.

Saudosa Maloca, Maloca querida: um estudo morfológico da relação forma/usos do espaço em moradias autoconstruídas e construídas pelo poder público após um ano de ocupação

This study intends to enhance the existing knowledge concerning the patterns of the uses of space for low cost housing in Parnamirim, Rio Grande do Norte, Brazil, by way of comparative morphological studies in spatial arrangements and articulations regarding three distinct, however inter-related, sets of social housing: (1) a development comprising 21 self-built houses erected on public routes and illegal plots within a tract of land originally designed to be an industrial development: (2) architect-designed houses built by the public authority in order to accommodate the previous 21 (plus a few additions) families occupying the self-built dwellings, and (3) modifications performed by dwellers on a total of those 24 houses built by the public authority after an occupation period of one year. The predominant uses of each room within the self-built and modified houses were represented in ground plan, based on empirical observation, surveys with dwellers and the use of analytical procedures of morphologic analysis of nature predominantly geometric (specific) and topology (space syntax analysis). A scale of priorities was identified in relation to the uses of each room, its geometrical arrangement (adjacency, front/back relations etc), and underlying structures (connectivity, depth and spatial integration) in order to establish congruencies and non-congruencies between a social-cultural order embedded in the self-built domestic space and the design logic contained in the houses offered by official agencies. The comparative analysis points towards the convivial existence of two tendencies: one that seems to reinforce a design logic inasmuch as the additions and modifications performed by the dwellers do not alter but even emphasize the original configuration of the designed houses, and another one in which those patterns are subverted in accordance with a logic which, to a lesser or greater degree, coincides with that of the self-built dwellings

A evolução da distribuição do tamanho das cidades: caso do nordeste brasileiro

A proposta deste artigo foi estudar a evolução do tamanho das cidades dos estados do nordeste do Brasil para os anos de 1990, 2000 e 2010 através da regularidade empírica conhecida como lei de Zipf, a qual pode ser representada por meio da distribuição de Pareto. Por meio da análise na dinâmica da distribuição das populações através do tempo, o crescimento urbano revelou uma persistência hierárquica das cidades de Salvador, Fortaleza e Recife, enquanto que São Luís experimentou o quarto lugar no rankinging das maiores cidades, que persistiu nas duas últimas décadas. A lei de Zipf não se verificou quando se considerou as cidades do Nordeste em conjunto, que pode ser devido ao menor grau de desenvolvimento urbano das cidades dessa região. Na análise dos estados em separado, também não se observou a lei de Zipf, embora tenha se verificado a lei de Gibrat, a qual postula que o crescimento das cidades é independente de seu tamanho. Por fim, acredita-se que a instalação do complexo minerometalúrgico do Maranhão tenha contribuído para o desenvolvimento e para a redução da desigualdade urbana intracidade nesta área.

O papel dinamizador do turismo no espaço rural: o caso das aldeias da Felgueira e do Trebilhadouro

As áreas rurais têm vindo a sofrer várias transformações ao longo dos tempos. Algumas dessas alterações são a perda de importância da agricultura e o surgimento de modelos de desenvolvimento urbano-industriais que privilegiaram o desenvolvimento das áreas urbanas e negligenciam as áreas rurais. A crescente valorização destes espaços por parte da população essencialmente urbana tem levado a que estas áreas rurais sejam cada vez mais procuradas e que o turismo seja visto como um mecanismo capaz de assegurar o seu desenvolvimento. Neste sentido, o presente estudo procura perceber se o turismo está a ter um papel dinamizador em duas aldeias do município de Vale de Cambra, nomeadamente, a aldeia da Felgueira e a aldeia do Trebilhadouro, bem como dar sugestões para maximizar o potencial do turismo no desenvolvimento das referidas aldeias. Para o efeito, foi realizada uma pesquisa bibliográfica sobre conceitos genéricos de turismo, sobre o desenvolvimento do turismo em espaço rural e de elementos que permitiram uma breve caracterização do município e das aldeias em estudo. Relativamente à metodologia utilizada do estudo empírico, esta consiste numa abordagem qualitativa, tendo sido elaborados três guiões de entrevistas destinados aos residentes, agentes da oferta e entidades locais responsáveis pelo desenvolvimento e gestão do turismo. Os resultados obtidos sugerem que o turismo está a ter um papel dinamizador nas aldeias da Felgueira e do Trebilhadouro. Algumas sugestões são apresentadas para incrementar o potencial do turismo no desenvolvimento destas aldeias.

Tidal Energy ”Round Robin” Tests Comparisons between towing tank and circulating tank results

One key step of the industrial development of a tidal energy device is the testing of scale prototype devices within a controlled laboratory environment. At present, there is no available experimental protocol which addresses in a quantitative manner the differences which can be expected between results obtained from the different types of facilities currently employed for this type of testing. As a consequence, where differences between results are found it has been difficult to confirm the extent to which these differences relate to the device performance or to the test facility type. In the present study, a comparative ”Round Robin” testing programme has been conducted as part of the EC FP VII MaRINET program in order to evaluate the impact of different experimental facilities on the test results. The aim of the trials was to test the same model tidal turbine in four different test facilities to explore the sensitivity of the results to the choice of facility. The facilities comprised two towing tanks, of very different size, and two circulating water channels. Performance assessments in terms of torque, drag and inflow speed showed very similar results in all facilities. However, expected differences between the different tank types (circulating and towing) were observed in the fluctuations of torque and drag measurements. The main facility parameters which can influence the behaviour of the turbine were identified; in particular the effect of blockage was shown to be significant in cases yielding for high thrust coefficients, even at relatively small blockage ratios.

A narrativa histórica de Alexandre Wollner sobre o design brasileiro em sua relação com arte, indústria e tecnologia

This work aims to investigate the historical narratives in which the graphic designer Alexandre Wollner assembled about the development of its own profession in Brazil, focusing the ways in which his discourse points relations among design (with greater emphasis in graphic design) and visual arts, the industrial development and notions about technology. Firstly, the theoretical setup searched for dialogues with design historians, with Mikhail Bakhtin, specially his concepts about “ideology” and “discourse’, and the theory of Field Autonomy by Pierre Bourdieu applied in the artistic practice. Following, the relation between Wollner’s own journey and the Brazilian industrial development is shown, and, at last, three of his historical texts are studied, which are written in different moments (1964; 1983; 1998), being those in which the analyzed author wished to point out the origens, events and names that are more remarkable. Throughout the work, it is pointed the importance of Wollner’s contact with the modernist european ideologies that share an abstract and rationalist matrix found at Hochschule für Gestaltung Ulm (HfG Ulm), the german design school from the city of Ulm, in the 1950s. Such modernist discourse understood the practice of design as a method with scientific character, being then different of some other more recurring artistic professional practices in some productive sectors. Wollner aimed to apply such ideals in his professional practice, being the foundation of the paulista office forminform, in 1958, one of his first expressions of such posture, and in his academic practice, helping the foundation of the Escola Superior de Desenho Industrial (ESDI), in Rio de Janeiro, in 1963. Such modernist ideals went along with moments of the Brazilian industrial development during the government of Juscelino Kubitschek (1956–1961) and the “Economical Miracle” from the military government (1968–1973). Wollner argued about the need for the development of national design as a technological and productive differential that would help the growth of national industry, based on Ulm’s project model concept. It is defended that Wollner’s professional and intelectual path, in his efforts of thinking a history of Brazilian design through the choice of pioneers in the area, was founded on an “ideal model” of design, leaving aside the modernist experiences from the 1950s. Such posture would indicate a search for validation of his own profession that was beginning to become more evident in Brazilian productive means, aiming the creation of a differential space in comparison with pre-established practices, usually link to graphic artists from the time.

Legal consideration on Convention for the Prevention of Dumping of Wastes and Other Matter (at sea) and assessment of its implementation in Iran (The London [dumping] Convention)

Making use of sea, as a place for dumping of wastes and other materials from human activities wasn’t forbidden before creation of the convention on the prevention of marine pollution by dumping of wastes and other matters (London Convention). Therefore, industrial countries, without any specific consideration, were dumping their wastes into the world’s seas. Many years and before the beginning of rapid development of industry, the great self- purification of seas were preventing some of discharging problems. But gradually, the increase of industrial development activities, exceeded the production of wastes and other matters, and this led to the misuse of world’s seas and oceans as a dump site. One of the most important consequences of 1972 Stockholm World Conference was to focusing world attention on threats have jeopardized marine environment balance. World countries` leaders committed in Stockholm to begin protecting the environment. Finally, this movement at marine environment section led to the creation of London Convention in the same year. London Convention was concluded for cooperating between countries at December 29, 1972 to promote effective control of all marine environment polluting resources and to prevent marine pollution by dumping wastes and other matters. Then it was opened for signature to other countries. At last, after 15 states signature, this convention was entered in to force at August 30.1975. Ratification and execution of London Convention resulted in coordinated performance of countries in marine waste management. Common actions with supports and cooperation of different international, regional, governmental and non-governmental organizations and agencies prevent marine pollution by dumping of wastes and other matters. Due to the importance of wastes in our marine and coastal areas, investigation of the performance of London Convention can identify the lack of regulations and lack of regulation supports about marine pollution prevention by dumping of wastes and other matters in Iran. Considering this issue, proper protection of seas will be achieved. London Convention has been studied here to achieve intended purposes. In first chapter, generalities about marine environment, including the importance and necessity of marine environment protection, with the focus on some internal and international resources of environmental law accompanying with marine pollution and its recourses, and finally, due to the study theme, dumping of wastes and other matters at seas with its impacts have been investigated .In the section of international measures, a brief history of marine pollution and marine environment international law with international law framework, exclusively for controlling of wastes and other material discharge at seas and oceans has been reviewed. In second chapter, obligations, amendments, and annexes of London Convention have been investigated and classified. The obligations have been categorized in to legal obligations and technical and organizational obligations. In former section, subject ,purpose, territory, exceptions, rights and duties of parties, convention amendments,… and in latter, special requirements for wastes assessment, determination of pollutants` permissible limit, site selection and type of discharge selection, design principles for marine environment quality monitoring program, and discharge license issuance mechanism have been studied. In third chapter, due to the examination of convention performance in Iran, the internal law system for marine environment conservation and its pollution has been mentioned in detail. Considering this, two issues have been compared .firstly, convention obligations with regional treaties that Iran as a party to them and secondly, Iranian internal law there of .Finally, common and different aspects of these issues have been determined. At last, recommendations and strategies for convention enforcement and conformity of its obligations with internal regulations have been presented. Furthermore, translation of convention English text has been reviewed and its protocol has been translated.

Fabrication and optimizing of metal nano silicate as toxic metal absorbent from sea water

Pure Water, is a crucial demand of creature life. Following industrial development, extra amount of toxic metals such as chromium enters the environmental cycle through the sewage, which is considered as a serious threat for organisms. One of the modern methods of filtration and removal of contaminants in water, is applying Nano-technology. According to specific property of silicate materials, in this article we try to survey increased power in composites and various absorption in several morphologies and also synthesis of Nano-metal silicates with different morphologies as absorbent of metal toxic ions. At first, we synthesize nano zink silicate with three morphologies considering context and the purpose of this survey. 1) Nano synthesis of zink silicate hollow cavity by hydrothermal method in mixed solvent system of ethanol/glycol polyethylene. 2) Zink nano wires silicate in a water-based system by controlling the amount of sodium silicate. 3) Synthesis of nano zink silicate membrane. After synthesizing, we measured the cadmium ion absorbance by synthesized nano zink silicates. Controlling PH, is the applied absorption method. Next step, we synthesized nano zink-magnesium silicate composite in two various morphologies of nanowires and membrane by different precent of zink and magnesium, in order to optimize synthesized nano metal silicate. We used zink nitrate and magnesium nitrate and also measured cadmium absorption by synthesized nano metal silicates in the same way of PH control absorption. In the 3rd step, in order to determine the impact of the type of metal in nano metal silicate, we synthesized nano magnesium silicate and compared its absorption with nano zink silicate. Furthermore, we calculated the optimal concentration in one of synthesizes. Optimal concentration is the process which has the maximum absorption. While applying two methods of absorption in the test, finally we compared the effect of absorption method on the absorption level. Below you find further steps of synthesis: 1) Using IR, RAMAN, XRD spectroscopy to check the accuracy of synthesis. 2) Checking the dispersion of nano particles in ethanol solution by light microscope. 3) Measuring and observing particles with scanning electron microscope (SEM). 4) Using atomic absorption device for measuring the cadmium concentration in water-based solutions. The nano metal silicates were synthesized successfully. All of synthesized nano absorbents have the cadmium ion absorbency. The cadmium absorption via nano absorbents depend on various factors such as kind of metal in nano silicate and percent of metal in nano metal silicate composite. Meanwhile the absorption and PH control of medium containing the absorbent and solution would affect the cadmium absorption.

Decorative tiles between Brazil and Europe: the case of the Santa Catharina factory

Abstract It was in the first decade of the twentieth century that the first white china Factory was implemented in Brazil. Fruit of the association between the Sao Paulo Aristocracy and the Italian Romeo Ranzini, this factory was responsible for producing significant amounts of crockery in industrial moulds in sao Paulo, Brazil. It was also the first factory to produce decorative tiles that would be part of the architecture of the public buildings built between 1919 and 1922 in Commemoration of the Centennial of the Brazilian Independence. Known as The Santa Catharina Factory, this factory was inaugurated in 1913 with the participation of Italian immigrants and German technologies for the development of its first manufacturing activities. As a result of a number of economic, political and social matters that started in the previous century in the city of Sao Paulo, The Santa Catharina factory played an important role in industrial development as regards the production of national white china and was used as a model for the construction of new ceramic factories in Sao Paulo. After acquired by Matarazzo industries in 1927, had closed their activities in 1937. This research is based on the identification and analysis of the first tiles produced in Brazil by the Santa Catharina Factory, which were part of the architectural decorations of the buildings built in Sao Paulo to the celebration of the Centennial of the Brazilian Independence. Designed by Victor Dubugras, The Largo da Memoria (located in the city of Sao Paulo) and the buildings located in the "Paths of the Sea" road marked the beginning of Brazilian industrialization and the emergence of Neocolonial Movement in architecture of Sao Paulo. Studies of the first national patterns of decorative tiles approach a subject poorly researched by experts in tiled studies in Brazil, although in this case these tiles have represented not only an important milestone in the national industrialization, but also have demarcated the significant changes in architectural and decorative practices in the country in the early twentieth century; RESUMÈ: C'est durant la premiere decennie du XXe siecle que la premiere usine de porcelaine blanche fut implant& au Bresil. Elle fut le fruit de l'association entre l'aristocratie de Sao Paulo et l'italien Romeo Ranzini. L'usine produisait une quantite signifiante de porcelaine sur le territoire industriel de Sao Paulo. Ce fut egalement la premiere usine a produire des carreaux decoratifs qui sont aujourd'hui visibles dans l'architecture des batiments publics construit entre 1919 et 1922, pour la commemoration du centenaire de l'independance bresilienne. Connue sous le nom de Santa Catharina, cette usine fut inaugure en 1912. Elle fut construite par des émigrés Italiens, et utilisa pour la technologie allemande pour so production. En tant que resultat d'un certain nombre de questions economiques, politiques et sociales qui ont &butes durant le siecle precedent dans la ville de Sao Paulo, l'usine Santa Catharina a joue un role important dans le developpement industriel de la production de porcelaine blanche nationale et a ete utilise comme modele pour la construction de nouvelles usines de ceramique a Sao Paulo. Apres avoir ete achete par l'industrie Matarazzo en 1927, elle cessa ses activites en 1937. Cette recherche est basee sur l'identification et l'analyse des premiers carreaux decoratifs fabriques au Bresil par l'usine Santa Catharina, qui etait une partie des decorations architecturales des batiments construits a Sao Paulo pour la celebration du centenaire de l'Independance Bresilienne. Connue par Victor Dubugras, le "Largo da Memoria" (situe dans la ville de Sao Paulo), et les batiments situes sur le "Path of the Sea", ont marque le debut de l'industrialisation bresilienne et l'emergence d'un mouvement neocolonialiste dans l'architecture de Sao Paolo. L'etude des premiers modeles nationaux de carreaux decoratifs est un sujet peut etudie par les experts bresiliens, bien qu'ils furent un jalon importante pour l'industrialisation nationale. Its ont egalement entrains des changements importants dans les pratiques architecturales, et decoratives au sein du pays au XXe siecle. Mots-cles: Ceramique - carreaux decoratifs — L'usine Santa Catharina, Bresil - Production de carreaux; RIASSUNTO: Nel primo decennio del Novecento vide luce la prima fabbrica di ceramica di porcellana in Brasile. Frutto dell'associazione tra l'aristocrazia Paulista e l'italiano Romeo Ranzini, questa fabbrica fu responsabile della produzione di notevoli quantita di ceramica di porcellana mediante stampi industriali nella citta di San Paolo, Brasile. Fu anche la prima fabbrica a produrre azulejos che avrebbero poi fatto parte dell'architettura degli edifici pubblici costruiti tra it 1919 ed it 1922, per la commemorazione del Centenario dell'indipendenza Brasiliana. Conosciuta come Fabbrica di Santa Catharina, questa fu inaugurata nel 1913, con la partecipazione di immigrati italiani e con l'impiego di tecnologie tedesche per lo sviluppo delle sue prime attivita produttive. Risultato di una serie di cambiamenti economici, politici e sociali, che ebbero inizio nel secolo precedente nella citta di San Paolo, la Fabbrica di Santa Catharina svolse un ruolo importante nello sviluppo industriale per quanto riguarda la produzione di ceramica di porcellana nazionale e fu adottata come modello per la costruzione di nuove fabbriche a San Paolo. Successivamente, fu acquisita dalle industrie Matarazzo nel 1927, vedendo poi chiudersi le sue attivita nel 1937. Questa ricerca si basa sull'identificazione e l'analisi dei primi azulejos prodotti in Brasile dalla Fabbrica di Santa Catharina che fecero parte delle decorazioni architettoniche degli edifici costruiti a San Paolo per la commemorazione del Centenario dell'indipendenza Brasiliana. Progettati da Victor Dubugras, it Largo da Mem(Via (situato nella citta di San Paolo) e gli edifici che si trovano nei Caminhos do Mar marcarono l'inizio dell'industrializzazione brasiliana e la nascita del Movimento Neocolonial dell'architettura Paulista. Gli studi dei primi modelli di azulejos nazionali affrontano un argomento poco studiato dagli esperti in azulejaria in Brasile, nonostante rappresentino un importante avvenimento dell'industrializzazione nazionale, ma segnano anche i cambiamenti di significative pratiche architettoniche e decorative nel Paese nel primo Novecento. Parole chiave: Ceramica - porcellana - La fabbrica di Santa Catharina - Produzione di ceramica .

O consumo na estratégia de desenvolvimento sustentável brasileira

Dissertação (mestrado)—Universidade de Brasília, Centro de Estudos Avançados Multidisciplinares, Programa de Pós-Graduação em Desenvolvimento, Sociedade e Cooperação Internacional, 2016.

Saudosa Maloca, Maloca querida: um estudo morfológico da relação forma/usos do espaço em moradias autoconstruídas e construídas pelo poder público após um ano de ocupação

This study intends to enhance the existing knowledge concerning the patterns of the uses of space for low cost housing in Parnamirim, Rio Grande do Norte, Brazil, by way of comparative morphological studies in spatial arrangements and articulations regarding three distinct, however inter-related, sets of social housing: (1) a development comprising 21 self-built houses erected on public routes and illegal plots within a tract of land originally designed to be an industrial development: (2) architect-designed houses built by the public authority in order to accommodate the previous 21 (plus a few additions) families occupying the self-built dwellings, and (3) modifications performed by dwellers on a total of those 24 houses built by the public authority after an occupation period of one year. The predominant uses of each room within the self-built and modified houses were represented in ground plan, based on empirical observation, surveys with dwellers and the use of analytical procedures of morphologic analysis of nature predominantly geometric (specific) and topology (space syntax analysis). A scale of priorities was identified in relation to the uses of each room, its geometrical arrangement (adjacency, front/back relations etc), and underlying structures (connectivity, depth and spatial integration) in order to establish congruencies and non-congruencies between a social-cultural order embedded in the self-built domestic space and the design logic contained in the houses offered by official agencies. The comparative analysis points towards the convivial existence of two tendencies: one that seems to reinforce a design logic inasmuch as the additions and modifications performed by the dwellers do not alter but even emphasize the original configuration of the designed houses, and another one in which those patterns are subverted in accordance with a logic which, to a lesser or greater degree, coincides with that of the self-built dwellings

Reciclar o moderno para reabilitar o urbano

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitetura

An analysis of the effects of preferential trade policies through the estimation of quantitative models: the case of Portugal.

Doutoramento em Economia.

Lessons from natural disasters, tsunami-affected Small and Medium-Sized Enterprises(SMEs) in Sri Lanka

The main objective of this paper is to identify some of the key issues encountered by tsunami-affected small and medium-sized enterprises (SMEs) in the process of rehabilitation and re-establishment in Sri Lanka. The second objective is to assess how far these affected industries have received various benefits and supports from bodies such as government agencies, private sector firms, donors and NGOs to help them get back into business. The final objective is to recommend policies and strategies to develop the tsunami-affected SMEs in a self-sustaining manner and within a certain time period. The main database of firms for this research has been obtained from the Industrial Development Board, which conducted a survey covering 4,389 tsunami-affected micro- and SMEs. In addition to this, information from various state organizations and NGOs-based sources has been used. This paper identifies the main issues related to tsunami-affected SMEs ranging from basic infrastructure provision up to finance, marketing, machinery, technology, training, product identification and development and so forth. In fact, it is shown that there are no significant differences between issues faced by SMEs in general and tsunami-affected SMEs, apart of course from the effects of a sudden disaster (the tidal wave). Consequently, these issues can be generalized as issues relevant to SMEs in Sri Lanka as a whole. However, under the flood and rain of local and foreign assistance, there have been more pledges and promises than actual deliveries and, so, tsunami-affected SMEs have received comparatively little support and assistance in recovering and no records can be found as to where the colossal amount of foreign assistance received has actually gone. Finally, this paper recommends various types of business incubator centres and entrepreneurial enhancing skill programmes for the revamping of tsunami-affected SMEs in addition to the normal disaster risk management plan.