Effects of starch gelatinization and oxidation on the rheological behavior of chitosan/starch blends

Chitosan/starchblends represent an interesting alternative for the preparation of biocompatible drug delivery systems, packing materials and edible films. This paper reports on the effects of starch gelatinization and oxidation on the rheological behavior of chitosan/starch blends. The results show that the modifications in the starch structure cause changes in G` (storage modulus) and G `` (lossmodulus) as a function of frequency. For chitosan/starch, G `` is higher than G`, showing a viscous behavior. However, for chitosan/gelatinized starch and chitosan/oxidized starch, an increase in the angular frequency promotes a modulus crossover at omega = 0.02 and 0.04 rad s(-1), respectively. The viscosity curves as a function of shear rate show that both modifications cause an increase in viscosity, and all blends show a non-Newtonian behavior. (C) 2011 Society of Chemical Industry

Bättre utnyttjande av nya och befintliga förrådslokaler på SSAB Tunnplåt

The purpose of this assignment at SSAB Tunnplåt in Borlänge was mainly to investigate and describe the circumstances for the spare parts stored in storage facilities within the area of operation. Even new facilities which could serve as storage rooms and their opportunities for storing spare parts were an important part of the investigation. This because of the need for improved storing of spare parts. Furthermore, market offers where reviewed for storage of spare parts in more tailored designs. The work will culminate in proposals for improvement which is of importance for the development surrounding the storage and handling of spare parts. This is since the design and management of existing storage facilities is not perceived as satisfactory with regards to spare parts characteristics. Moreover, the amount of stock locations is too few in relation to the actual need. The approach used to achieve objectives of the work was an advanced mapping for collection of vital data. The mapping consisted of interviews with involved parties, both internal and external, for the most comprehensive picture of the problems as possible. In addition, a literature survey was conducted to identify possible options for the objectives of the work as well as a personal study of existing and new storage facilities. Furthermore, the market offers for improved conditions in storage rooms were examined. A clear picture of internal logistics and warehouse activities for spare parts at SSAB Tunnplåt has been obtained during this work. From this picture, it is concluded that work in and around storage facilities can be made more efficient. SSAB Tunnplåt should additionally make efforts in the storage facilities for better use of the available storage space. A number of proposals for improvement for each studied storage facility and spare parts management in general have been conducted. These proposals for improvement include presentations to improve the design of the studied storage facilities towards enabling more stock locations. The proposals also include additional equipment for handling spare parts, scrap handling, as well as expansions of the maintenance system which supports activities in the spare parts management.

Identifiering av parametrar till ackumulatortanken Solus1050 från consolar - en metodbeskrivning

This report describes the work done creating a computer model of a kombi tank from Consolar. The model was created with Presim/Trnsys and Fittrn and DF were used to identify the parameters. Measurements were carried out and were used to identify the values of the parameters in the model. The identifications were first done for every circuit separately. After that, all parameters are normally identified together using all the measurements. Finally the model should be compared with other measurements, preferable realistic ones. The two last steps have not yet been carried out, because of problems finding a good model for the domestic hot water circuit.The model of the domestic hot water circuit give relatively good results for low flows at 5 l/min, but is not good for higher flows. In the report suggestions for improving the model are given. However, there was not enough time to test this within the project as much time was spent trying to solve problems with the model crashing. Suggestions for improving the model for the domestic circuit are given in chapter 4.4. The improved equations that are to be used in the improved model are given by equation 4.18, 4.19 and 4.22.Also for the boiler circuit and the solar circuit there are improvements that can be done. The model presented here has a few shortcomings, but with some extra work, an improved model can be created. In the attachment (Bilaga 1) is a description of the used model and all the identified parameters.A qualitative assessment of the store was also performed based on the measurements and the modelling carried out. The following summary of this can be given: Hot Water PreparationThe principle for controlling the flow on the primary side seems to work well in order to achieve good stratification. Temperatures in the bottom of the store after a short use of hot water, at a coldwater temperature of 12°C, was around 28-30°C. This was almost independent of the temperature in the store and the DHW-flow.The measured UA-values of the heat exchangers are not very reliable, but indicates that the heat transfer rates are much better than for the Conus 500, and in the same range as for other stores tested at SERC.The function of the mixing valve is not perfect (see diagram 4.3, where Tout1 is the outlet hot water temperature, and Tdhwo and Tdhw1 is the inlet temperature to the hot and cold side of the valve respectively). The outlet temperature varies a lot with different temperatures in the storage and is going down from 61°C to 47°C before the cold port is fully closed. This gives a problem to find a suitable temperature setting and gives also a risk that the auxiliary heating is increased instead of the set temperature of the valve, when the hot water temperature is to low.Collector circuitThe UA-value of the collector heat exchanger is much higher than the value for Conus 500, and in the same range as the heat exchangers in other stores tested at SERC.Boiler circuitThe valve in the boiler circuit is used to supply water from the boiler at two different heights, depending on the temperature of the water. At temperatures from the boiler above 58.2°C, all the water is injected to the upper inlet. At temperatures below 53.9°C all the water is injected to the lower inlet. At 56°C the water flow is equally divided between the two inlets. Detailed studies of the behaviour at the upper inlet shows that better accuracy of the model would have been achieved using three double ports in the model instead of two. The shape of the upper inlet makes turbulence, that could be modelled using two different inlets. Heat lossesThe heat losses per m3 are much smaller for the Solus 1050, than for the Conus 500 Storage. However, they are higher than those for some good stores tested at SERC. The pipes that are penetrating the insulation give air leakage and cold bridges, which could be a major part of the losses from the storage. The identified losses from the bottom of the storage are exceptionally high, but have less importance for the heat losses, due to the lower temperatures in the bottom. High losses from the bottom can be caused by air leakage through the insulation at the pipe connections of the storage.

Rapport från/Report from IEA Task-14 mötet/meeting on solar heating system, Hameln Tyskland/Germany August 1992

Participation as observer at the meeting of Task 14 of IEA's Solar Heating and Cooling Projects held in Hameln, Germany has led to greater understanding of interesting developments underway in several countries. This will be of use during the development of small scale systems suitable for Swedish conditions. A summary of the work carried out by the working groups within Task 14 is given, with emphasis on the Domestic Hot Water group. Experiences of low-flow systems from several countries are related, and the conclusion is drawn that the maximum theoretical possible increase in performance of 20% has not been achieved due to poor heat exchangers and poor stratification in the storage tanks. Positive developments in connecting tubes and pumps is noted. Further participation as observer in Task 14 meetings is desired, and is looked on favourably by the members of the group. Another conclusion is that SERC should carry on with work on Swedish storage tanks, with emphasis on better stratification and heat exchangers, and possible modelling of system components. Finally a German Do-it-Vourself kit is described and judged in comparison with prefabricated models and Swedish Do-it-Yourself kits.

Utilização da frutose-1, 6-Bisfosfato como um protetor celular na preservação de fígados para transplante

A solução de preservação da Universidade de Wisconsin (UW) é considerada a solução padrão para preservação de fígados, rins e pâncreas. A frutose-1,6-bisfosfato (FBP) é uma substância que apresenta efeito protetor do fígado contra injúrias provocadas por agentes químicos e ocorridas durante o período de isquemia-reperfusão. O objetivo deste estudo foi avaliar os efeitos da FBP na composição de soluções para preservação de fígados para transplante. Neste estudo experimental, a perfusão e a preservação dos fígados foram realizadas em cada grupo com as soluções de UW, UW contendo 10 mmol/L de FBP (UWM) e FBP 10 mmol/L (FBPS), respectivamente. Os fígados foram armazenados em um recipiente plástico contendo solução de preservação a 4oC por 24 horas. As mensurações bioquímicas de AST, ALT, LDH e TBARS foram realizadas em amostras das soluções de preservação nos tempos de 0, 12, 18 e 24 horas. A análise histológica foi realizada em fígados preservados por 24 horas. O grau de preservação observado com as soluções de UW e FBPS foi similar até 18 horas de armazenamento. A adição de 10 mmol/L de FBP à solução de UW provocou um aumento das injúrias ocorridas e uma pior preservação quando comparado ao grupo armazenado em UW. A FBP protegeu os fígados contra danos causados pelos radicais livres por tempos de preservação inferiores a 18 horas. Não houve diferença significativa entre os grupos na análise histológica dos fígados preservados no tempo de 24 horas. A FBP utilizada em solução foi eficaz na preservação de fígados, podendo ser um importante constituinte para outras formulações.

Viabilidade e frigoconservação de borbulhas de citros

Este trabalho teve como objetivo estudar a manutenção da viabilidade das borbulhas de laranjeira ‘Valência’ e tangerineira ‘Montenegrina’, oriundas de ambiente protegido e pomar, sob diferentes processos de desinfestação e períodos de armazenamento em câmara fria, assim como avaliar o comportamento das substâncias de reserva contidas nos ramos porta-borbulhas nos diferentes períodos de armazenamento. Com estes objetivos foram conduzidos dois experimentos em câmara fria com temperatura em torno de 5ºC. No experimento 1, testou-se borbulhas de duas cultivares de citros oriundas de ambiente protegido, três tratamentos químicos (testemunha, 1x tratado com Captan e 2x tratado com Captan na dose de 10g/L) e três períodos de armazenamento (0, 90, e 180 dias), com quatro repetições. No experimento 2, testou-se borbulhas de duas cultivares de citros oriundas do pomar de citros, três tratamentos químicos (testemunha, 1x tratado com Captan e 2x tratado com Captan na dose de 10g/L) e cinco períodos de armazenamento (0, 45, 90, 135 e 180 dias), com quatro repetições. As borbulhas da cultivar Montenegrina, mantiveram-se viáveis por 90 dias sem tratamento com fungicida e por, no mínimo, 180 dias se submetidas a 1 tratamento com fungicida no momento de seu armazenamento. As borbulhas da cultivar Valência, coletadas de ambiente protegido, mantiveram-se viáveis por, no mínimo, 180 dias sem a necessidade de tratamento com fungicida. As substâncias de reserva dos ramos porta-borbulhas sofreram redução ao longo do armazenamento.

Permanência de alunos nos cursos presenciais e a distância em Administração: contribuições para a gestão acadêmica

A educação a distância vem ganhando destaque nos últimos anos em função da capacidade de expansão do ensino superior e também por incluir um grupo de pessoas que, de outra forma, não poderia realizar uma graduação. O objetivo dessa pesquisa é identificar as variáveis que influenciam o processo de permanência dos alunos de Administração, comparando resultados das modalidades presencial e a distância, tomando como caso a Universidade Estadual do Maranhão (Uema). Como principal referencial teórico do presente estudo, escolheu-se o Modelo de Integração do Estudante de Tinto (1975), considerado como a primeira proposta academicamente reconhecida de determinação das variáveis que intervém no processo de evasão e permanência de alunos em um curso de graduação. Um dos componentes do modelo despertou o interesse de comparação entre as duas modalidades (presencial e a distância) de forma especial, qual seja: a integração social, decorrente das interações discentes e docentes, que em geral são pouco exploradas nos estudos empíricos. O método definido para o estudo foi de caráter descritivo e base qualitativa. A submissão do conjunto de variáveis observadas na literatura a uma análise de juízes resultou na definição de três principais Dimensões e 60 Componentes, a saber: (1) Perfil do aluno; (2) Estar-em-rede; e (3) Condições para a permanência. Essas variáveis compuseram o quadro de análise de conteúdo categorial, resultante da aplicação de múltiplos instrumentos de coleta de dados (dois questionários e uma entrevista em profundidade), que foram utilizados na triangulação com dados secundários obtidos no próprio Enade (2009). Como contribuição teórica da presente tese, aponta-se a possibilidade de integração das três visões filosóficas: Cognitivismo, Construtivismo e Conectivismo que se interrelacionam na gestão acadêmica de cursos superiores pela unicidade da educação vislumbrada pelo blended learning como tendência futura para a educação superior. Outras contribuições são apresentadas em relação aos componentes: atributos individuais, trabalho e estágio, contexto familiar, escolaridade anterior, uso das TICs, interação docente e discente, compromisso pessoal e institucional e integração acadêmica.

A atuação em rede de instituições governamentais na resolução de conflitos sobre demandas sanitárias no Rio de Janeiro

O presente trabalho tem por objetivo apresentar um estudo que analisa e identifica forças e fraquezas na atuação convergente em rede por órgãos estatais na Câmara de Resolução de Litígios de Saúde e no Núcleo de assessoria técnica da Secretaria de Estado de Saúde, perante a Justiça Federal do Rio de Janeiro, na resolução de conflitos que envolvem demandas sanitárias. Foi realizado um estudo de caso conjugado com pesquisa de campo, bibliográfica e documental, na busca de descrever a intervenção da Câmara de Resolução de Litígios de Saúde e do Núcleo de Assessoria Técnica da Justiça Federal do Rio de Janeiro, no contexto da vida real em que atuam, ou seja, a judicialização de políticas públicas de saúde na cidade do Rio de Janeiro. Os resultados mostram que a atuação em rede de órgãos governamentais gera ganhos sociais para os cidadãos do Rio de Janeiro.

Graph analysis of verbal fluency test discriminate between patients with Alzheimer’s disease, Mild Cognitive Impairment and normal elderly controls

Verbal fluency is the ability to produce a satisfying sequence of spoken words during a given time interval. The core of verbal fluency lies in the capacity to manage the executive aspects of language. The standard scores of the semantic verbal fluency test are broadly used in the neuropsychological assessment of the elderly, and different analytical methods are likely to extract even more information from the data generated in this test. Graph theory, a mathematical approach to analyze relations between items, represents a promising tool to understand a variety of neuropsychological states. This study reports a graph analysis of data generated by the semantic verbal fluency test by cognitively healthy elderly (NC), patients with Mild Cognitive Impairment – subtypes amnestic(aMCI) and amnestic multiple domain (a+mdMCI) - and patients with Alzheimer’s disease (AD). Sequences of words were represented as a speech graph in which every word corresponded to a node and temporal links between words were represented by directed edges. To characterize the structure of the data we calculated 13 speech graph attributes (SGAs). The individuals were compared when divided in three (NC – MCI – AD) and four (NC – aMCI – a+mdMCI – AD) groups. When the three groups were compared, significant differences were found in the standard measure of correct words produced, and three SGA: diameter, average shortest path, and network density. SGA sorted the elderly groups with good specificity and sensitivity. When the four groups were compared, the groups differed significantly in network density, except between the two MCI subtypes and NC and aMCI. The diameter of the network and the average shortest path were significantly different between the NC and AD, and between aMCI and AD. SGA sorted the elderly in their groups with good specificity and sensitivity, performing better than the standard score of the task. These findings provide support for a new methodological frame to assess the strength of semantic memory through the verbal fluency task, with potential to amplify the predictive power of this test. Graph analysis is likely to become clinically relevant in neurology and psychiatry, and may be particularly useful for the differential diagnosis of the elderly.

Termoterapia e quimioterapia de banana 'Prata-Anã' associadas à temperatura de armazenamento no controle de podridões em pós-colheita

O objetivo deste estudo foi avaliar o efeito da termoterapia (56 ºC por 6 min) e quimioterapia (propiconazole 250 ml.l-1) associado com temperatura de armazenamento (temperatura ambiente, 18 ºC e 13 ºC) no controle de podridões de bananas (Musa spp.) 'Prata-Anã' (AAB) em pós-colheita. Os tratamentos apresentaram diferenças significativas na percentagem de área lesionada por fruto, perda de peso e coloração externa da casca em todas as temperaturas de armazenamento. A quimioterapia e a combinação termoterapia e quimioterapia evitaram a manifestação de podridões nas três condições de armazenamento, enquanto a termoterapia reduziu a percentagem de área lesionada por fruto de 98% para 11% em temperatura ambiente, de 8% para 7% em 18 ºC e de 10% para 0% em 13 ºC, sendo mais eficiente sob a temperatura de 13 ºC. Frutos não tratados perderam 25%, 10% e 3% de peso e atingiram a cor 7, 5 e 1 em temperatura ambiente, 18 ºC e 13 ºC, respectivamente. Frutos tratados com termoterapia e quimioterapia perderam 24, 11 e 5% e 20, 10 e 3%, e atingiram índice médio de cor 4 e 3,5, respectivamente. O período de conservação foi estendido para 18, 24 e 45 dias em temperatura ambiente, 18 ºC e 13 ºC, respectivamente. A combinação dos métodos evitou a manifestação de podridões, reduziu a perda de peso e manteve a cor da casca e a qualidade dos frutos.

Germinação e armazenamento de sementes de COCA (Erythroxylum ligustrinum DC. - Erythroxylaceae)

O objetivo deste trabalho foi avaliar o efeito da temperatura sobre a germinação e o armazenamento de sementes de Erythroxylum ligustrinum DC. As sementes foram colocadas germinar caixas de plásticas sobre duas folhas de papel, umedecidas com Nistatina 0, 2%, mantidas em germinadores nas temperaturas constantes de 5, 10, 15, 20, 25, 30, 35, 40 e 45ºC e com fotoperíodo de 12 horas. Para o armazenamento, as sementes foram colocadas em sacos de papel, mantidos à temperatura ambiente e em geladeira. em seguida, mensalmente, foi avaliada a germinação das sementes. A temperatura mínima, a faixa de temperatura ideal e a temperatura máxima para germinação de sementes de coca estão entre 10 e 15ºC, 25 e 30ºC e 40 e 45ºC, respectivamente. O armazenamento de sementes coca por longo período é inviável em embalagens de papel na geladeira (10ºC ± 2) e em temperatura ambiente (27ºC ± 5).

Preservation of minimally processed aurora-1 peaches using additives

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Controle de estoques de sal: uma inovação da quantificação e no gerenciamento dos recursos naturais da indústria mineral

The strengthening of the domestic industry in Brazil required the modernization, mechanization and expansion of salt production. Thereafter the production of sea salt started to be made in a process of continuous flow, where the product is constantly stored in yards, with daily movements in and out of salt. Thus far, the major bottleneck found in this production process is the control of production, because due to the large amount produced and variety of losses existing in the various stages of production there are not a regulated and safe way to control inventories with accuracy and speed demanded. In a typical case with a salt marsh company of Rio Grande do Norte state, salt produced is stored in two open courtyards and inventory control of salt made by carrying input / output relationship of salt in each storage yard. This work developed a conceptual model of inventory control, based on topography, adopting surveys into one of the courtyards of the company. There were 25 biweekly survey measurements over a year book to generate digital models representing the stock. For each measurement, results were compared with the values of inventory accounting provided by the salt marsh in order to identify existing losses and mark out the sales department on the actual stock available at each measurement date. Inventories calculated by the model indicated losses of 6,349 tonnes for the period of one year book and 3,279 tonnes for the period between harvests, when compared to the accounting control

Alianças estratégicas enquanto formas microorganizacionais em cooperação competitiva: o caso da Rede Universitária de Incubadoras Tecnológicas de Cooperativas Populares - Rede de ITCPs

At present, the network re appear like alternatives of find forms in arrangements inter-organizational that offer his members better opportunities of modernizes technological, insertion in the market, managerial and at the same time permit the exchange of experiences, information and knowledge for fortify and compete of equal for equal, permitting brighten up the harmful effects of the compete wild. A threat that can be minimized by the organization in net and the use of other forms interorganizational and strategic alliances. Therefore the demonstrates the context of the competitive cooperation in network, seeking criteria of analysis of that phenomenon organizational, on the basis of a study of case of the net ITCPs and in the literature researched, aimed with that criterion and indicator for creation of a model of evaluation in the future (Factor Net) that be prominent for the drawing of those forms organizational you maintained, supportive, competitive and cooperative

Group Sequential Communication (GSC): Especificação e Análise de Desempenho de umMecanismo de Comunicação de Tempo Real Compatível ao Padrão IEEE 802.11/11e Aplicado à Automação Industrial

This thesis proposes the specification and performance analysis of a real-time communication mechanism for IEEE 802.11/11e standard. This approach is called Group Sequential Communication (GSC). The GSC has a better performance for dealing with small data packets when compared to the HCCA mechanism by adopting a decentralized medium access control using a publish/subscribe communication scheme. The main objective of the thesis is the HCCA overhead reduction of the Polling, ACK and QoS Null frames exchanged between the Hybrid Coordinator and the polled stations. The GSC eliminates the polling scheme used by HCCA scheduling algorithm by using a Virtual Token Passing procedure among members of the real-time group to whom a high-priority and sequential access to communication medium is granted. In order to improve the reliability of the mechanism proposed into a noisy channel, it is presented an error recovery scheme called second chance algorithm. This scheme is based on block acknowledgment strategy where there is a possibility of retransmitting when missing real-time messages. Thus, the GSC mechanism maintains the real-time traffic across many IEEE 802.11/11e devices, optimized bandwidth usage and minimal delay variation for data packets in the wireless network. For validation purpose of the communication scheme, the GSC and HCCA mechanisms have been implemented in network simulation software developed in C/C++ and their performance results were compared. The experiments show the efficiency of the GSC mechanism, especially in industrial communication scenarios.