Reflective journals:can they be used to identify struggling students?

The ability to identify early failure in knowledge accquisition amongst students is important because it enables tutors to put in place suitable interventions to help struggling students. We hypothesised that if a reflective learning journal is a useful learning tool, there ought to be relationship between the type of journal entries and the depth of knowledge acquisition. Our research question is: can reflectiuve journals be used to identify struggling students? Previous work with reflective journals has not related the level of reflection with module outcomes obtained by the student. In our study, we have classified journal entries written by first year students in a foundationalprogramming module based on the SOLO taxonomy and compared this against the outcomes of two module assessments. Our results suggest that there is potential for using reflective journals to identify struggling stuidents in first year programming.

Engineering the future:CDIO as a tool for combating retention difficulties

With the demand for engineering graduates at what may be defined as an unprecedented high, many universities find themselves facing significant levels of student attrition-with high "drop-out levels" being a major issue in engineering education. In order to address this, Aston University in the UK has radically changed its undergraduate engineering education curriculum, introducing capstone CDIO (Conceive, Design, Implement, Operate) modules for all first year students studying Mechanical Engineering and Design. The introduction of CDIO is aimed at making project / problem based learning the norm. Utilising this approach, the learning and teaching in engineering purposefully aims to promote innovative thinking, thus equipping students with high-level problem-solving skills in a way that builds on theory whilst enhancing practical competencies and abilities. This chapter provides an overview of an Action Research study undertaken contemporaneously with the development, introduction, and administration of the first two semesters of CDIO. It identifies the challenges and benefits of the approach and concludes by arguing that whilst CDIO is hard work for staff, it can make a real difference to students' learning experiences, thereby positively impacting retention. © 2012, IGI Global.

Innovating engineering education: the RVS approach:an empirically grounded method to improved practice and enhanced student experience

This paper builds on previous work (Clark, 2009; Clark & Andrews 2011, 2014) to continue the debate around a seemingly universal question…“How can educational theory be applied to engineering education in such a way so as to make the subject more accessible and attractive to students? It argues that there are three key elements to student success; Relationships, Variety & Synergy (RVS). By further examining the purposefully developed bespoke learning and teaching approach constructed around these three elements (RVS) the discourse in this paper links educational theory to engineering education and in doing so further develops arguments for the introduction of a purposefully designed pedagogic approach for use in engineering education.

Tackling transition! Peer mentoring in engineering education:a UK perspective

This paper builds on previous work (Clark, 2009; Clark & Andrews 2011, 2014) to continue the debate around a seemingly universal question…“How can educational theory be applied to engineering education in such a way so as to make the subject more accessible and attractive to students? It argues that there are three key elements to student success; Relationships, Variety & Synergy (RVS). By further examining the purposefully developed bespoke learning and teaching approach constructed around these three elements (RVS) the discourse in this paper links educational theory to engineering education and in doing so further develops arguments for the introduction of a purposefully designed pedagogic approach for use in engineering education.

Electronic Education in the Field of Electrical Engineering Disciplines. Combined Didactic Interactive Program System

At present in the educational process of electrical engineering disciplines electronic learning program, providing control over reproductive educational-cognitive activity (the decision of standard problems) and universal modeling program systems, for instance Electronics Workbench, giving a chance of organizing productive, in particular research activity are basically used. However universal modeling program systems can not provide auto control over educational-cognitive activity because of the absence of the feedback with students. The combined didactic interactive program system, providing the closed directed auto control over both the reproductive and productive heuristic educational-cognitive activity of the student is offered.

Cognitive Bias in Knowledge Engineering Course

The paper presents experience in teaching of knowledge and ontological engineering. The teaching framework is targeted on the development of cognitive skills that will allow facilitating the process of knowledge elicitation, structuring and ontology development for scaffolding students’ research. The structuring procedure is the kernel of ontological engineering. The 5-steps ontology designing process is described. Special stress is put on “beautification” principles of ontology creating. The academic curriculum includes interactive game-format training of lateral thinking, interpersonal cognitive intellect and visual mind mapping techniques.

Using cognitive load theory to interpret student difficulties with a problem-based learning approach to engineering education:a case study

This article reports on an investigationwith first year undergraduate ProductDesign and Management students within a School of Engineering and Applied Science. The students at the time of this investigation had studied fundamental engineering science and mathematics for one semester. The students were given an open ended, ill-formed problem which involved designing a simple bridge to cross a river.They were given a talk on problemsolving and given a rubric to follow, if they chose to do so.They were not given any formulae or procedures needed in order to resolve the problem. In theory, they possessed the knowledge to ask the right questions in order tomake assumptions but, in practice, it turned out they were unable to link their a priori knowledge to resolve this problem. They were able to solve simple beam problems when given closed questions. The results show they were unable to visualize a simple bridge as an augmented beam problem and ask pertinent questions and hence formulate appropriate assumptions in order to offer resolutions.

Experiences on dynamic simulation software in chemical engineering education

Commercial process simulators are increasing interest in the chemical engineer education. In this paper, the use of commercial dynamic simulation software, D-SPICE® and K-Spice®, for three different chemical engineering courses is described and discussed. The courses cover the following topics: basic chemical engineering, operability and safety analysis and process control. User experiences from both teachers and students are presented. The benefits of dynamic simulation as an additional teaching tool are discussed and summarized. The experiences confirm that commercial dynamic simulators provide realistic training and can be successfully integrated into undergraduate and graduate teaching, laboratory courses and research. © 2012 The Institution of Chemical Engineers.

Practically oriented design projects in mechatronics engineering:a case study of design experiences and outcomes

This paper discusses and presents a case study of a practically oriented design project together with a few examples of implemented design projects recently incorporated into an undergraduate system course at the mechatronics engineering department in Ah-Balqa’ Applied University. These projects have had a positive impact on both the department and its graduates. The focus of these projects is the design and implementation of processor-based system. This helps graduate students cross the border between hardware design and software design. Our case study discusses the research methodology adopted for the physical development of the project, the technology used in the project, and the design experiences and outcomes.

Computer Mathematics for Motivated Students

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013

University-led innovative and inspirational engineering education

The UK Government and large employers have recognised the skills gap between learners leaving the education system and the requirements of employers. The current system is seen to be failing significant numbers of learners and has been accused of schooling but not educating our young people. University-led technical colleges are one part of the solution being developed to provide outstanding engineering education. This paper focusses on the learning experience that the Aston University Engineering Academy, the first University-led University Technical College (UTC), has created for entrants to the Engineering Academy in September 2012, when it opens in brand new buildings next to the University. The overall aim is to produce technically literate young people that have business and enterprise skills as well as insight into the diverse range of opportunities in Engineering and Technical disciplines. The project has brought University staff and students together with employers and Academy staff to optimise the engineering education that they will receive. The innovative model presented has drawn on research from across the world in the implementation of this new type of school, as well as educational practices from the USA and the Scandinavian countries. The resulting curriculum is authentic and exciting and expands the University model of problem-based learning and placements into the secondary school environment. The benefits of this close partnership for University staff and students, the employers and the Academy staff are expanded on and the paper concludes with a prediction of progression routes from the Academy.

Part-time students in the workforce - enhancing practice in course provision

This paper describes a recent project on HE delivery to part-time students in the workforce. The main aim has been to investigate and propose effective practice in part-time provision in engineering in order to enhance the experience of part-time students at the same time as giving potential benefits to courses, departments and all students. The project has included interviews with employers and a questionnaire survey for current part-time students. The final guidance has been assembled with the aim of supporting the enhancement of existing courses and the development of new part-time provision. The paper presents the approaches taken in the project as a whole, analyses the results of the student survey, and summarises the overall outcomes.

Practice based learning approaches in collaborative design and engineering education:a case study investigation into the benefits of a crossdisciplinary practice based learning strategy

This study explores the ongoing pedagogical development of a number of undergraduate design and engineering programmes in the United Kingdom. Observations and data have been collected over several cohorts to bring a valuable perspective to the approaches piloted across two similar university departments while trialling a number of innovative learning strategies. In addition to the concurrent institutional studies the work explores curriculum design that applies the principles of Co-Design, multidisciplinary and trans disciplinary learning, with both engineering and product design students working alongside each other through a practical problem solving learning approach known as the CDIO learning initiative (Conceive, Design Implement and Operate) [1]. The study builds on previous work presented at the 2010 EPDE conference: The Effect of Personality on the Design Team: Lessons from Industry for Design Education [2]. The subsequent work presented in this paper applies the findings to mixed design and engineering team based learning, building on the insight gained through a number of industrial process case studies carried out in current design practice. Developments in delivery also aligning the CDIO principles of learning through doing into a practice based, collaborative learning experience and include elements of the TRIZ creative problem solving technique [3]. The paper will outline case studies involving a number of mixed engineering and design student projects that highlight the CDIO principles, combined with an external industrial design brief. It will compare and contrast the learning experience with that of a KTP derived student project, to examine an industry based model for student projects. In addition key areas of best practice will be presented, and student work from each mode will be discussed at the conference.

Bringing engineering education to life – an empirical approach to learning and teaching

Learning and teaching approaches to engineering are generally perceived to be difficult and academically challenging. Such challenges are reflected in high levels of student attrition and failure. In addressing this issue, a unique approach to engineering education has been developed by the paper authors. This approach, which is suitable for undergraduate and postgraduate levels, brings together pedagogic and engineering epistemologies in an empirically grounded framework. It is underpinned by three distinctive concepts: Relationships, Variety & Synergy. Based upon research, the R + V + S approach to Engineering Education provides a learning and teaching strategy, which in enhancing the student experience, increases retention and positively impacts student success [S2]. Based on the study findings, this paper shows how, by designing engineering education around the concepts of Relationships, Variety and Synergy, the student learning experience becomes one that is academically challenging yet beneficial to both students and engineering educators. The challenge is to widen and test the approach in other areas of engineering education, before going on to investigate the value of the approach in other disciplines.

A matter of professionalism? Reflection and reflexivity in continuing engineering education and practice

The argument that this paper sets out to critique is that in order to promote professionalism in Engineering Education and Practice, graduate level engineering programmes need to introduce the concepts of reflection and reflexivity into the curriculum right from the onset. By focusing upon the delivery of a newly developed „Work Based‟ Master’s level programme in Professional Engineering, this paper provides an overview of the first part of an empirical study which sets out to investigate the challenges associated with embedding reflection and reflexivity into Engineering Education. The paper concludes by noting that whilst student engineers may struggle with the concepts of reflection and reflexivity, with support and encouragement such difficulties can be overcome. Moreover, by encouraging students to reflect upon their Professional Practice, the programme not only enables students to consider how they may apply what they have learnt to their Professional Practice, but also encourages them to think about how they can link their experiences as Professional Engineers to what and how they learn both whilst on the programme but also as lifelong learners.