Sequential incoherence in a multi-party synchronous computer mediated communication for an introductory Health Informatics course.

Online courses will play a key role in the high-volume Informatics education required to train the personnel that will be necessary to fulfill the health IT needs of the country. Online courses can cause feelings of isolation in students. A common way to address these feelings is to hold synchronous online "chats" for students. Conventional chats, however, can be confusing and impose a high extrinsic cognitive load on their participants that hinders the learning process. In this paper we present a qualitative analysis that shows the causes of this high cognitive load and our solution through the use of a moderated chat system.

Interprofessional Education in Anatomy: Learning Together in Medical and Nursing Training

Teamwork and the interprofessional collaboration of all health professions are a guarantee of patient safety and highly qualified treatment in patient care. In the daily clinical routine, physicians and nurses must work together, but the education of the different health professions occurs separately in various places, mostly without interrelated contact. Such training abets mutual misunderstanding and cements professional protectionism, which is why interprofessional education can play an important role in dismantling such barriers to future cooperation. In this article, a pilot project in interprofessional education involving both medical and nursing students is presented, and the concept and the course of training are described in detail. The report illustrates how nursing topics and anatomy lectures can be combined for interprofessional learning in an early phase of training. Evaluation of the course showed that the students were highly satisfied with the collaborative training and believed interprofessional education (IPE) to be an important experience for their future profession and understanding of other health professionals. The results show that the IPE teaching concept, which combines anatomy and nursing topics, provides an optimal setting for learning together and helps nurses and doctors in training to gain knowledge about other health professionals’ roles, thus evolving mutual understanding.

"Of course I will...": The combined effect of certainty and level of expectancies on persistence and performance

The importance of performance expectancies for the prediction of regulation of behavior and actual performance has long been established. Building on theories from the field of social cognition, we suggest that the level of performance expectancies, as well as the certainty of the expectancy, have a joint influence on an individual’s beliefs and behavior. In two studies (one cross sectional using a sample of secondary school students and one longitudinal using a sample of university students) we found that expectancies more strongly predicted persistence, and subsequent performance, the more certain the expectancy was. This pattern was found even if prior performance was controlled, as in Study 2. The data give an indication that it may be useful to include certainty as an additional variable in expectancy models.

Gender Segregation in Vocational Education: Introduction

This introductory chapter develops the overall research focus and the aim of the present special issue ‘Gender segregation in vocational education’. Against the backdrop of strong horizontal gender segregation in vocational education and training (VET), we ask how institutional arrangements affect gendered (self-)selection into VET, and to what extent the patterns of the latter vary by context and over time. In order to expand our knowledge about the impact of educational offers and policies on gendered educational pathways and gender segregation in the labour market, we have gathered comparative quantitative studies that analyse the relationship between national variations in the organization of VET and cross-national differences in educational and occupational gender segregation from an institutional perspective. Following a review of the core literature within the field of gender segregation in VET, this introduction presents a discussion of education system classifications and institutional level mechanisms based on the contributions made in this volume. We then discuss gendered educational choices at the individual level, with particular emphasis on variation across the life course. Finally, we conclude our introductory chapter by commenting on the main contributions of the volume as a whole, as well as addressing suggestions for further research.

Sustained impact of a short small group course with systematic feedback in addition to regular clinical clerkship activities on musculoskeletal examination skills-a controlled study.

BACKGROUND The discrepancy between the extensive impact of musculoskeletal complaints and the common deficiencies in musculoskeletal examination skills lead to increased emphasis on structured teaching and assessment. However, studies of single interventions are scarce and little is known about the time-dependent effect of assisted learning in addition to a standard curriculum. We therefore evaluated the immediate and long-term impact of a small group course on musculoskeletal examination skills. METHODS All 48 Year 4 medical students of a 6 year curriculum, attending their 8 week clerkship of internal medicine at one University department in Berne, participated in this controlled study. Twenty-seven students were assigned to the intervention of a 6×1 h practical course (4-7 students, interactive hands-on examination of real patients; systematic, detailed feedback to each student by teacher, peers and patients). Twenty-one students took part in the regular clerkship activities only and served as controls. In all students clinical skills (CS, 9 items) were assessed in an Objective Structured Clinical Examination (OSCE) station, including specific musculoskeletal examination skills (MSES, 7 items) and interpersonal skills (IPS, 2 items). Two raters assessed the skills on a 4-point Likert scale at the beginning (T0), the end (T1) and 4-12 months after (T2) the clerkship. Statistical analyses included Friedman test, Wilcoxon rank sum test and Mann-Whitney U test. RESULTS At T0 there were no significant differences between the intervention and control group. At T1 and T2 the control group showed no significant changes of CS, MSES and IPS compared to T0. In contrast, the intervention group significantly improved CS, MSES and IPS at T1 (p < 0.001). This enhancement was sustained for CS and MSES (p < 0.05), but not for IPS at T2. CONCLUSIONS Year 4 medical students were incapable of improving their musculoskeletal examination skills during regular clinical clerkship activities. However, an additional small group, interactive clinical skills course with feedback from various sources, improved these essential examination skills immediately after the teaching and several months later. We conclude that supplementary specific teaching activities are needed. Even a single, short-lasting targeted module can have a long lasting effect and is worth the additional effort.

'Your Heart Can't Wait'---A worksite program: Increasing the effectiveness of worksite coordinators to implement a community-wide health education program

A worksite health education program called “Your Heart Can't Wait,” was designed by the American Heart Association Gulf Coast Area (AHA). The objectives were to educate individuals about the signs and symptoms of heart attacks and the actions they should take to improve heart attack victims' chances for survival. AHA volunteers agreed to serve as mentors for this program. ^ A study was designed to determine if worksite coordinators who had the assistance of experienced AHA volunteers had higher rates of program adoption and implementation than worksite coordinators without assistance. Ninety-seven companies participated in the study. Twelve AHA volunteers were randomly assigned to work with forty-three of the worksite coordinators. Mentor/mentee contact forms were used to assess the mentoring process during the course of the study. Program adoption forms were used to measure rates of program adoption and follow-up questionnaires were used to measure rates of program implementation after the study was completed. The twelve mentors were interviewed to provide information for improving future mentoring efforts. ^ Thirty-eight companies completed program adoption forms and fifty-one companies reported using YHCW program components. For the most part, the volunteer mentors did not spend a significant amount of time contacting or working with their assigned worksite coordinators. As a result, the planned analysis comparing the implemented programs between worksite coordinators with and without assistance could not be completed. ^ Additional analyses were performed comparing the implemented programs based upon whether the companies had existing health education/health promotion programs and whether the worksite coordinators had experience using AHA Heart At Work program components. ^ Recommendations based on the mentor interviews were made to improve the success of volunteer assistance programs in the future. ^

The use of computers for graduate education in Project Management. Improving the integration to the industry.

This paper presents an initiative for monitoring the competence acquisition by a team of students with different backgrounds facing the experience of being working by projects and in a project. These students are graduated bachelor engineering are inexperienced in the project management field and they play this course on a time-shared manner along with other activities. The goal of this experience is to increase the competence levels acquired by using an structured web based portfolio tool helping to reinforce how relevant different project management approaches can result for final products and how important it becomes to maintain the integration along the project. Monitoring is carried out by means of have a look on how the work is being done and measuring different technical parameters per participant. The use of this information could make possible to bring additional information to the students involved in terms of their individual competencies and the identification of new opportunities of personal improvement. These capabilities are strongly requested by companies in their daily work as well as they can be very convenient too for students when they try to organize their PhD work.

How Blended Learning Reduce Underachievement in Higher Education: An Experience in Teaching Computer Sciences.

This paper presents a blended learning approach and a study evaluating instruction in a software engineering-related course unit as part of an undergraduate engineering degree program in computing. In the past, the course unit had a lecture-based format. In view of student underachievement and the high course unit dropout rate, a distance-learning system was deployed, where students were allowed to choose between a distance-learning approach driven by a moderate constructivist instructional model or a blended-learning approach. The results of this experience are presented, with the aim of showing the effectiveness of the teaching/learning system deployed compared to the lecture-based system previously in place. The grades earned by students under the new system, following the distance-learning and blended-learning courses, are compared statistically to the grades attained in earlier years in the traditional face-to-face classroom (lecture-based) learning.

Motivating Young Students to Start a Career in Nuclear: The Basic Course of Science and Nuclear Technology, An Educational Activity of Spanish Young Generation in Nuclear (JÓVENES NUCLEARES)

The main objective of this course, conducted by Jóvenes Nucleares (Spanish Young Generation in Nuclear, JJNN), a non-profit organization that depends on the Spanish Nuclear Society (SNE) is to pass on basic knowledge about Science and Nuclear Technology to the general public, mostly students and introduce them to its most relevant points. The purposes of this course are to provide general information, to answer the most common questions about Nuclear Energy and to motivate the young students to start a career in nuclear. Therefore, it is directed mainly to high school and university students, but also to general people that wants to learn about the key issues of such an important matter in our society. Anybody could attend the course, as no specific scientific education is required. The course is done at least once a year, during the Annual Meeting of the Spanish Nuclear Society, which takes place in a different Spanish city each time. The course is done also to whichever university or institution that asks for it to JJNN, with the only limit of the presenter´s availability. The course is divided into the following chapters: Physical nuclear and radiation principles, Nuclear power plants, Nuclear safety, Nuclear fuel, Radioactive waste, Decommission of nuclear facilities, Future nuclear power plants, Other uses of nuclear technology, Nuclear energy, climate change and sustainable development. The course is divided into 15 minutes lessons on the above topics, imparted by young professionals, experts in the field that belongs either to the Spanish Young Generation in Nuclear, either to companies and institutions related with nuclear energy. At the end of the course, a 200 pages book with the contents of the course is handed to every member of the audience. This book is also distributed in other course editions at high schools and universities in order to promote the scientific dissemination of the Nuclear Technology. As an extra motivation, JJNN delivers a course certificate to the assistants. At the end of the last edition course, in Santiago de Compostela, the assistants were asked to provide a feedback about it. Some really interesting lessons were learned, that will be very useful to improve next editions of the course. As a general conclusion of the courses it can be said that many of the students that have assisted to the course have increased their motivation in the nuclear field, and hopefully it will help the young talents to choose the nuclear field to develop their careers

Project-based learning experience on Data Structures course

This paper presents the innovations in the practical work of the Data Structures subject carried out in the last five years, including a transition period and a first year of implantation of the European Higher Education Area. The practical coursework is inspired by a project-based methodology and from 2008/2009 additional laboratory sessions are included in the subject schedule. We will present the academic results and ratios of the mentioned time period which imply a significant improvement on students' performance.

Virtual Learning Environments In Faculties Of Education In Spain: Changes On Student Attitude

This paper presents some results of a R+D project entitled “e-Learning system for Practical Training of University students in Education Faculties (ForELearn)”, developed in Spain by the Universidad de Granada and the Universidad Politécnica de Madrid and funded by the Spanish Ministry of Education. In a first phase, through the use of AulaWeb Learning Management System, a set of adaptations and improvements of this software application have been done for the design and development of an experimental course of Practicum supervision. Next, the implementation of this course by means of a group of face to face and online seminars provides experimental data for the analysis and discussion about the point of view of users (preservice teachers) that have tracked their practice supervision with AulaWeb.

The Experience of Helicopters subject-course in the OCW-UPM Project. A Proposal on Technology Dissemination.

An experience developed by the authors in the design of educational tools, funded on multimedia support for using in teaching, will be presented. These tools have been used on the subject of Helicopters, http://ocw.upm.es/ingenieriaaeroespacial/ helicopteros at the Universidad Politécnica de Madrid (E.U.I.T. Aeronáutica). Throughout more than ten years, these didactical and educational elements have been defined and developed. It has the singularity that most of them have been designed for undergraduate students, as a part of their end of degree projectwork. This peculiarity has led to a wide range of proposals and solutions, as well as an appropriate approach. depending on the level of knowledge. The evolution of tools for developing these materials will be presented, discussing advantages and disadvantages. Finally, we will advance the new materials which are being prepared at present.

A hands-on education project: antenna design for inter-CubeSat communications

CubeSat platforms have become a de facto standard for universities willing to initiate space-technology activities with students. These small satellite platforms ease the implementation of hands-on education projects and opening the apertures of new research areas. Moreover, due to the limited volume (a 10 cm cube) and power (1 W), the application of imaginative solutions is mandatory. This leads to new innovation processes in the course of CubeSat projects. In this paper, we present a hands-on education project the aim of which is the specification, design, building and measurement of an antenna for communication between nanosatellites and, in particular, CubeSats. The project lies within the framework of ETSIT-UPM innovative education activities in the area of space technology, where students play a leading role in real engineering projects.

A platform for real-time control education with LEGO MINDSTORMS.

A set of software development tools for building real-time control systems on a simple robotics platform is described in the paper. The tools are being used in a real-time systems course as a basis for student projects. The development platform is a low-cost PC running GNU/Linux, and the target system is LEGO MINDSTORMS NXT, thus keeping the cost of the laboratory low. Real-time control software is developed using a mixed paradigm. Functional code for control algorithms is automatically generated in C from Simulink models. This code is then integrated into a concurrent, real-time software architecture based on a set of components written in Ada. This approach enables the students to take advantage of the high-level, model-oriented features that Simulink oers for designing control algorithms, and the comprehensive support for concurrency and real-time constructs provided by Ada.