Three-Dimensional (3D) Microarchitecture Correlations with 2D Projection Image Gray-Level Variations Assessed by Trabecular Bone Score Using High-Resolution Computed Tomographic Acquisitions: Effects of Resolution and Noise.

The aim of the present study is to determine the level of correlation between the 3-dimensional (3D) characteristics of trabecular bone microarchitecture, as evaluated using microcomputed tomography (μCT) reconstruction, and trabecular bone score (TBS), as evaluated using 2D projection images directly derived from 3D μCT reconstruction (TBSμCT). Moreover, we have evaluated the effects of image degradation (resolution and noise) and X-ray energy of projection on these correlations. Thirty human cadaveric vertebrae were acquired on a microscanner at an isotropic resolution of 93μm. The 3D microarchitecture parameters were obtained using MicroView (GE Healthcare, Wauwatosa, MI). The 2D projections of these 3D models were generated using the Beer-Lambert law at different X-ray energies. Degradation of image resolution was simulated (from 93 to 1488μm). Relationships between 3D microarchitecture parameters and TBSμCT at different resolutions were evaluated using linear regression analysis. Significant correlations were observed between TBSμCT and 3D microarchitecture parameters, regardless of the resolution. Correlations were detected that were strongly to intermediately positive for connectivity density (0.711≤r(2)≤0.752) and trabecular number (0.584≤r(2)≤0.648) and negative for trabecular space (-0.407 ≤r(2)≤-0.491), up to a pixel size of 1023μm. In addition, TBSμCT values were strongly correlated between each other (0.77≤r(2)≤0.96). Study results show that the correlations between TBSμCT at 93μm and 3D microarchitecture parameters are weakly impacted by the degradation of image resolution and the presence of noise.

Radiation doses in computed tomography: pitfalls in comparing CT to chest X-ray

Rapid response to : Madan M Rehani and Manorma Berry Radiation doses in computed tomography BMJ 2000; 320: 593-594

Diagnosis of right ventricular dysfunction in acute pulmonary embolism using helical computed tomography.

Forty-six consecutive patients with pulmonary embolism (PE) who underwent pulmonary angiography, helical computed tomography (CT), and echocardiography in the investigators' emergency department were studied. It was determined that the CT right ventricular (RV)/left ventricular (LV) end-diastolic area ratio was correlated with PE obstruction and echocardiography. A CT RV/LV area ratio >1 had a sensitivity of 88% and a specificity of 88% in diagnosing significant PE. The present study suggests that helical CT may be used as a triage tool in acute PE for selecting high-risk patients, using calculation of the RV/LV area ratio to detect RV dysfunction.

Managing Technologies in Research Organization: Framework for Research Surplus Portfolio

Avoimesta innovaatiosta ja innovaatioiden tehokkaasta hyödyntämisestä on tulossa tärkeitä osia yritysten T&K-prosesseihin. Diplomityön tarkoituksena on luoda viitekehys teknologioiden, jotka eivät kuulu yrityksen ydinliiketoimintaan, tehokkaampaan hallinnointiin tutkimusorganisaatiossa. Konstruktiivinen viitekehys on rakennettu pohjautuen aineettomien pääomien johtamisen ja portfolion hallinnoinnin teorioihin. Lisäksi työssä määritellään työkaluja jatekniikoita ylijäämäteknologioiden arviointiin. Uutta ylijäämäteknologioiden portfoliota voidaan hyödyntää hakukoneena, ideapankkina, kommunikaatiotyökaluna tai teknologioiden markkinapaikkana. Sen johtaminen koostuu tietojen dokumentoinnista järjestelmään, teknologioiden arvioinnista ja portfolion päivityksestä ja ylläpidosta.

XML-based information management environment for PE technologies

Printed electronics is an emerging concept in electronics manufacturing and it is in very early development stage. The technology is not stable, design kits are not developed, and flows and Computer Aided Design (CAD) tools are not fixed yet. The European project TDK4PE addresses all this issues and this PFC has been realized on this context. The goal is to develop an XML-based information system for the collection and management of information from the technology and cell libraries developed in TDK4PE. This system will ease the treatment of that information for a later generation of specific Design Kits (DK) and the corresponding documentation. This work proposes a web application to generate technology files and design kits in a formatted way; it also proposes a structure for them and a database implementation for storing the needed information. The application will allow its users to redefine the structure of those files, as well as export and import XML files, between other formats.

Assessment of glenoid inclination on routine clinical radiographs and computed tomography examinations of the shoulder.

BACKGROUND: Accurate assessment of glenoid inclination is of interest for a variety of conditions and procedures. The purpose of this study was to develop an accurate and reproducible measurement for glenoid inclination on standardized anterior-posterior (AP) radiographs and on computed tomography (CT) images. MATERIALS AND METHODS: Three consistently identifiable angles were defined: Angle α by line AB connecting the superior and inferior glenoid tubercle (glenoid fossa) and the line identifying the scapular spine; angle β by line AB and the floor of the supraspinatus fossa; angle γ by line AB and the lateral margin of the scapula. Experimental study: these 3 angles were measured in function of the scapular position to test their resistance to rotation. Conventional AP radiographs and CT scans were acquired in extension/flexion and internal/external rotation in a range up to ±40°. Clinical study: the inter-rater reliability of all angles was assessed on AP radiographs and CT scans of 60 patients (30 with proximal humeral fractures, 30 with osteoarthritis) by 2 independent observers. RESULTS: The experimental study showed that angle α and β have a resistance to rotation of up to ±20°. The deviation from neutral position was not more than ±10°. The results for the inter-rater reliability analyzed by Bland-Altman plots for the angle β fracture group were (mean ± standard deviation) -0.1 ± 4.2 for radiographs and -0.3 ± 3.3 for CT scans; and for the osteoarthritis group were -1.2 ± 3.8 for radiographs and -3.0 ± 3.6 for CT scans. CONCLUSION: Angle β is the most reproducible measurement for glenoid inclination on conventional AP radiographs, providing a resistance to positional variability of the scapula and a good inter-rater reliability.

Ingénieur pédagogique et démarche projet : facteurs clés de succès pour l'intégration des technologies dans la pratique enseignante?

Résumé: Les gouvernements des pays occidentaux ont dépensé des sommes importantes pour faciliter l'intégration des technologies de l'information et de la communication dans l'enseignement espérant trouver une solution économique à l'épineuse équation que l'on pourrait résumer par la célèbre formule " faire plus et mieux avec moins ". Cependant force est de constater que, malgré ces efforts et la très nette amélioration de la qualité de service des infrastructures, cet objectif est loin d'être atteint. Si nous pensons qu'il est illusoire d'attendre et d'espérer que la technologie peut et va, à elle seule, résoudre les problèmes de qualité de l'enseignement, nous croyons néanmoins qu'elle peut contribuer à améliorer les conditions d'apprentissage et participer de la réflexion pédagogique que tout enseignant devrait conduire avant de dispenser ses enseignements. Dans cette optique, et convaincu que la formation à distance offre des avantages non négligeables à condition de penser " autrement " l'enseignement, nous nous sommes intéressé à la problématique du développement de ce type d'applications qui se situent à la frontière entre les sciences didactiques, les sciences cognitives, et l'informatique. Ainsi, et afin de proposer une solution réaliste et simple permettant de faciliter le développement, la mise-à-jour, l'insertion et la pérennisation des applications de formation à distance, nous nous sommes impliqué dans des projets concrets. Au fil de notre expérience de terrain nous avons fait le constat que (i)la qualité des modules de formation flexible et à distance reste encore très décevante, entre autres parce que la valeur ajoutée que peut apporter l'utilisation des technologies n'est, à notre avis, pas suffisamment exploitée et que (ii)pour réussir tout projet doit, outre le fait d'apporter une réponse utile à un besoin réel, être conduit efficacement avec le soutien d'un " champion ". Dans l'idée de proposer une démarche de gestion de projet adaptée aux besoins de la formation flexible et à distance, nous nous sommes tout d'abord penché sur les caractéristiques de ce type de projet. Nous avons ensuite analysé les méthodologies de projet existantes dans l'espoir de pouvoir utiliser l'une, l'autre ou un panachage adéquat de celles qui seraient les plus proches de nos besoins. Nous avons ensuite, de manière empirique et par itérations successives, défini une démarche pragmatique de gestion de projet et contribué à l'élaboration de fiches d'aide à la décision facilitant sa mise en oeuvre. Nous décrivons certains de ses acteurs en insistant particulièrement sur l'ingénieur pédagogique que nous considérons comme l'un des facteurs clé de succès de notre démarche et dont la vocation est de l'orchestrer. Enfin, nous avons validé a posteriori notre démarche en revenant sur le déroulement de quatre projets de FFD auxquels nous avons participé et qui sont représentatifs des projets que l'on peut rencontrer dans le milieu universitaire. En conclusion nous pensons que la mise en oeuvre de notre démarche, accompagnée de la mise à disposition de fiches d'aide à la décision informatisées, constitue un atout important et devrait permettre notamment de mesurer plus aisément les impacts réels des technologies (i) sur l'évolution de la pratique des enseignants, (ii) sur l'organisation et (iii) sur la qualité de l'enseignement. Notre démarche peut aussi servir de tremplin à la mise en place d'une démarche qualité propre à la FFD. D'autres recherches liées à la réelle flexibilisation des apprentissages et aux apports des technologies pour les apprenants pourront alors être conduites sur la base de métriques qui restent à définir. Abstract: Western countries have spent substantial amount of monies to facilitate the integration of the Information and Communication Technologies (ICT) into Education hoping to find a solution to the touchy equation that can be summarized by the famous statement "do more and better with less". Despite these efforts, and notwithstanding the real improvements due to the undeniable betterment of the infrastructure and of the quality of service, this goal is far from reached. Although we think it illusive to expect technology, all by itself, to solve our economical and educational problems, we firmly take the view that it can greatly contribute not only to ameliorate learning conditions but participate to rethinking the pedagogical approach as well. Every member of our community could hence take advantage of this opportunity to reflect upon his or her strategy. In this framework, and convinced that integrating ICT into education opens a number of very interesting avenues provided we think teaching "out of the box", we got ourself interested in courseware development positioned at the intersection of didactics and pedagogical sciences, cognitive sciences and computing. Hence, and hoping to bring a realistic and simple solution that could help develop, update, integrate and sustain courseware we got involved in concrete projects. As ze gained field experience we noticed that (i)The quality of courseware is still disappointing, amongst others, because the added value that the technology can bring is not made the most of, as it could or should be and (ii)A project requires, besides bringing a useful answer to a real problem, to be efficiently managed and be "championed". Having in mind to propose a pragmatic and practical project management approach we first looked into open and distance learning characteristics. We then analyzed existing methodologies in the hope of being able to utilize one or the other or a combination to best fit our needs. In an empiric manner and proceeding by successive iterations and refinements, we defined a simple methodology and contributed to build descriptive "cards" attached to each of its phases to help decision making. We describe the different actors involved in the process insisting specifically on the pedagogical engineer, viewed as an orchestra conductor, whom we consider to be critical to ensure the success of our approach. Last but not least, we have validated a posteriori our methodology by reviewing four of the projects we participated to and that we think emblematic of the university reality. We believe that the implementation of our methodology, along with the availability of computerized cards to help project managers to take decisions, could constitute a great asset and contribute to measure the technologies' real impacts on (i) the evolution of teaching practices (ii) the organization and (iii) the quality of pedagogical approaches. Our methodology could hence be of use to help put in place an open and distance learning quality assessment. Research on the impact of technologies to learning adaptability and flexibilization could rely on adequate metrics.

The effects of potentiallydisruptive technology on business model - a case study of new technologies in ICT industry

This study examines how firms interpret new, potentially disruptive technologies in their own strategic context. The work presents a cross-case analysis of four potentially disruptive technologies or technical operating models: Bluetooth, WLAN, Grid computing and Mobile Peer-to-peer paradigm. The technologies were investigated from the perspective of three mobile operators, a device manufacturer and a software company in the ICT industry. The theoretical background for the study consists of the resource-based view of the firm with dynamic perspective, the theories on the nature of technology and innovations, and the concept of business model. The literature review builds up a propositional framework for estimating the amount of radical change in the companies' business model with two middle variables, the disruptiveness potential of a new technology, and the strategic importance of a new technology to a firm. The data was gathered in group discussion sessions in each company. The results of each case analysis were brought together to evaluate, how firms interpret the potential disruptiveness in terms of changes in product characteristics and added value, technology and market uncertainty, changes in product-market positions, possible competence disruption and changes in value network positions. The results indicate that the perceived disruptiveness in terms ofproduct characteristics does not necessarily translate into strategic importance. In addition, firms did not see the new technologies as a threat in terms of potential competence disruption.

Impacts des technologies de l'information sur les modes de coordination à travers quatre études en systèmes d'information

L'évolution de l'environnement économique, des chaînes de valeur et des modèles d'affaires des organisations augmentent l'importance de la coordination, qui peut être définie comme la gestion des interdépendances entre des tâches réalisées par des acteurs différents et concourants à un objectif commun. De nombreux moyens sont mis en oeuvre au sein des organisations pour gérer ces interdépendances. A cet égard, les activités de coordination bénéficient massivement de l'appui des technologies de l'information et de communication (TIC) qui sont désormais disséminées, intégrées et connectées sous de multiples formes tant dans l'environnement privé que professionnel. Dans ce travail, nous avons investigué la question de recherche suivante : comment l'ubiquité et l'interconnec- tivité des TIC modifient-elles les modes de coordination ? A travers quatre études en systèmes d'information conduites selon une méthodologie design science, nous avons traité cette question à deux niveaux : celui de l'alignement stratégique entre les affaires et les systèmes d'information, où la coordination porte sur les interdépendances entre les activités ; et celui de la réalisation des activités, où la coordination porte sur les interdépendances des interactions individuelles. Au niveau stratégique, nous observons que l'ubiquité et l'interconnectivité permettent de transposer des mécanismes de coordination d'un domaine à un autre. En facilitant différentes formes de coprésence et de visibilité, elles augmentent aussi la proximité dans les situations de coordination asynchrone ou distante. Au niveau des activités, les TIC présentent un très fort potentiel de participation et de proximité pour les acteurs. De telles technologies leur donnent la possibilité d'établir les responsabilités, d'améliorer leur compréhension commune et de prévoir le déroulement et l'intégration des tâches. La contribution principale qui émerge de ces quatre études est que les praticiens peuvent utiliser l'ubiquité et l'interconnectivité des TIC pour permettre aux individus de communi-quer et d'ajuster leurs actions pour définir, atteindre et redéfinir les objectifs du travail commun. -- The evolution of the economic environment and of the value chains and business models of organizations increases the importance of coordination, which can be defined as the management of interdependences between tasks carried out by different actors and con-tributing to a common goal. In organizations, a considerable number of means are put into action in order to manage such interdependencies. In this regard, information and communication technologies (ICT), whose various forms are nowadays disseminated, integrated and connected in both private and professional environments, offer important support to coordination activities. In this work, we have investigated the following research question: how do the ubiquity and the interconnectivity of ICT modify coordination mechanisms? Throughout four information systems studies conducted according to a design science methodology, we have looked into this question at two different levels: the one of strategic alignment between business and information systems strategy, where coordination is about interdependencies between activities; and the one of tasks, where coordination is about interdependencies between individual interactions. At the strategic level, we observe that ubiquity and interconnectivity allow for transposing coordination mechanisms from one field to another. By facilitating various forms of copresence and visibility, they also increase proximity in asynchronous or distant coordination situations. At the tasks level, ICTs offer the actors a very high potential for participation and proximity. Such technologies make it possible to establish accountability, improve common understanding and anticipate the unfolding and integration of tasks. The main contribution emerging from these four studies is that practitioners can use the ubiquity and interconnectivity of ICT in order to allow individuals to communicate and adjust their actions to define, reach and redefine the goals of common work.

Right ventricular dysfunction in children and adolescents conceived by assisted reproductive technologies.

Assisted reproductive technologies (ART) predispose the offspring to vascular dysfunction, arterial hypertension, and hypoxic pulmonary hypertension. Recently, cardiac remodeling and dysfunction during fetal and early postnatal life have been reported in offspring of ART, but it is not known whether these cardiac alterations persist later in life and whether confounding factors contribute to this problem. We, therefore, assessed cardiac function and pulmonary artery pressure by echocardiography in 54 healthy children conceived by ART (mean age 11.5 ± 2.4 yr) and 54 age-matched (12.2 ± 2.3 yr) and sex-matched control children. Because ART is often associated with low birth weight and prematurity, two potential confounders associated with cardiac dysfunction, only singletons born with normal birth weight at term were studied. Moreover, because cardiac remodeling in infants conceived by ART was observed in utero, a situation associated with increased right heart load, we also assessed cardiac function during high-altitude exposure, a condition associated with hypoxic pulmonary hypertension-induced right ventricular overload. We found that, while at low altitude cardiac morphometry and function was not different between children conceived by ART and control children, under the stressful conditions of high-altitude-induced pressure overload and hypoxia, larger right ventricular end-diastolic area and diastolic dysfunction (evidenced by lower E-wave tissue Doppler velocity and A-wave tissue Doppler velocity of the lateral tricuspid annulus) were detectable in children and adolescents conceived by ART. In conclusion, right ventricular dysfunction persists in children and adolescents conceived by ART. These cardiac alterations appear to be related to ART per se rather than to low birth weight or prematurity.

Core Competence of a Small or Medium Sized Content Providing Company Operating in the Information and Communication Technologies Secto

Tutkimuksen tavoitteena on tarkastella tekijöitä, joista ydinosaaminen muodostuu, sekä sitä kuinka yritykset voisivat parhaiten hyödyntää omia resurssejaan ja osaamistaan tunnistetun ydinosaamisen avulla. Teoria osuudessa käydään läpi kuinka ydinosaaminen on kirjallisuudessa määritelty ja miten yritykset voivat sen määritellä sisäisesti itselleen. Empiirisessä osiossa käydään läpi Telecom Business Research Centerissä tehdyn kvantitatiivisen selvityksen pohjalta valitut kolme sisällöntuottaja case - yritystä sekä kuvataan näiden osaamista. Tiedot yrityksistä perustuvat niiden edustajille tehtyihin haastatteluihin ja heidän käsitykseensä omasta yrityksestään. Tämä näkemys on tutkimuksen kannalta äärimmäisen relevanttia, koska ydinosaamisen määrittely tehdään yrityksessä sisäisesti juuri haastatellun kaltaisten yrityksen ydintoimijoiden toimesta. Varsinaisten case -yritysten lisäksi käydään läpi käytännön tapaus action-oriented -tutkimusosuudessa. Tutkimusta ja siinä käsiteltyjä esimerkkejä tulisi hyödyntää yrityksen oman ydinosaamisselvityksen apuna prosessin varrella.