Evaluation of the color stability of two techniques for reproducing artificial irides after microwave polymerization

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the Light-Curing Unit, Storage Time and Shade of a Dental Composite Resin on the Fluorescence

The aim of this study was to determine the influence of three light-curing units, storage times and colors of the dental composite resin on the fluorescence. The specimens (diameter 10.0 +/- 0.1 mm, thickness 1.0 +/- 0.1 mm) were made using a stainless steel mold. The mold was filled with the microhybrid composite resin and a polyethylene film covered each side of the mold. After this, a glass slide was placed on the top of the mold. To standardize the top surface of the specimens a circular weight (1 kg) with an orifice to pass the light tip of the LCU was placed on the top surface and photo-activated during 40 s. Five specimens were made for each group. The groups were divided into 9 groups following the LCUs (one QTH and two LEDs), storage times (immediately after curing, 24 hours, 7 and 30 days) and colors (shades: A(2)E, A(2)D, and TC) of the composite resin. After photo-activation, the specimens were storage in artificial saliva during the storage times proposed to each group at 37 C and 100% humidity. The analysis of variance (ANOVA) and Tukey's post-hoc tests showed no significant difference between storage times (immediately, 24 hours and 30 days) (P > 0.05). The means of fluorescence had difference significant to color and light-curing unit used to all period of storage (P < 0.05). The colors had difference significant between them (shades: A2D < A2E < TC) (P < 0.05). The Ultraled (LED) and Ultralux (QTH) when used the TC shade showed higher than Radii (LED), however to A2E shade and A2D shade any difference were found (P > 0.05).

Morfologia de nectários em Leguminosae senso lato em áreas de caatinga no Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vase Life of New Tropical Cut Foliage: Cordyline terminalis

Cordyline terminalis is a tropical ornamental with high decorative value due its variety of colors and foliar patterns. This ornamental is new in the Brazilian market and has large potential to be exported. The lack of studies on postharvest aspects is a problem for new crops, and the development of good post-production techniques can reduce costs due to loss of unsalable, damaged plants. The present work aimed to characterize the vase life of red and green cultivars of C. terminalis. Conservation techniques, such as pulsing with gibberellic acid (GA(3)), wax spray, and cold storage for 10 and 20 days at 5, 10, and 13 degrees C were tested. Also, macro-and micronutrients concentration was tracked during the senescence process. In the water-based treatment (control), both cultivars had a vase life of 21 days. Vase life was not influenced by wax spray, GA pulsing, or cold storage for 10 days at 5, 10 or 13 degrees C. In both cultivars, the postharvest techniques used did not improve the vase life on this species. on the other hand, by cold storing the foliage for 20 days in any of the tested temperatures, the vase life was shortened one week, with a total of 14 days longevity compared with all other treatments. Color changes were not correlated with senescence of the foliage. Nutrients did not change during the evaluation period. C. terminalis had a vase life long enough for export, supported by cold storage up to 10 days, which did not shorten the vase life.

Why are fruits colorful? The relative importance of achromatic and chromatic contrasts for detection by birds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interação entre fatores visuais e olfativo em localização de recursos pela mosca-varejeira, Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae), em condições naturais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Skin glands, poison and mimicry in dendrobatid and leptodactylid amphibians

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uso de caldo de cana-de-açúcar para produção de levana por Zymomonas mobilis CCT4494

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

To be or not to be . . . a flower? A test of possible cues influencing hunting site selection in subadult females of the crab spider Epicadus heterogaster (Guerin 1812) (Araneae: Thomisidae)

Females of some Thomisidae species are known to use visual and olfactory stimuli to select high quality hunting sites. However, because studies about foraging behavior in this family are concentrated on a few species, the comprehension of the process related to hunting behavior evolution in crab spiders may be biased. In this study we investigated the hunting site selection of a previously unstudied crab spider, Epicadus heterogaster. We performed three experiments to evaluate the hypothesis that subadult females are able to use visual and olfactory stimuli to select hunting sites. In the first experiment, females did not preferentially select flower paper models that matched their body coloration. However, after choosing a model that had the same body color as the spider, they remained on it for longer periods than on models with different colors. In the second experiment, females did not discriminate between flower paper models, natural flower models and crumpled paper models. Females did also not discriminate among different olfactory stimuli in the third experiment. It is possible that subadult females of E. heterogaster need to establish and experience a given hunting site before evaluating its quality. However, it remains to be investigated if they use UV cues to select a foraging area before experiencing it.

The Effectiveness of Low-Intensity Red Laser for Activating a Bleaching Gel and Its Effect in Temperature of the Bleaching Gel and the Dental Pulp

Statement of the Problem: The effectiveness of low-intensity red laser for activating a bleaching gel and its effect in pulp temperature was not investigated in dental literature. Purpose: The objective of this study was to assess the effectiveness of low-intensity red laser for activating a bleaching gel, as well as its effect in temperature of the bleaching gel and the dental pulp. Materials and Methods: Forty extracted bovine teeth were immersed in a solution of coffee 14 days for darkening. The initial colors were recorded by spectrophotometric analysis. The specimens were randomly distributed into two groups (N = 20): the control, which did not receive light and the experimental group that received light from an appliance fitted with three red light-emitting laser diodes (? = 660 nm). A green-colored, 35% H2O2based bleaching gel was applied for 30 minutes, and changed three times. After bleaching, the colors were again measured to obtain the L*a*b* values. Color variation was calculated (?E) and the data submitted to the non-paired t-test (5%). To assess temperature, 10 human incisors were prepared, in which one thermocouple was placed on the bleaching gel applied on the surface of the teeth and another inside the pulp chamber. Results: There was a significant difference between the groups (p = 0.016), and the experimental group presented a significantly higher mean variation (7.21 +/- 2.76) in comparison with the control group (5.37 +/- 1.76). There was an increase in pulp temperature, but it was not sufficient to cause damage to the pulp. Conclusion: Bleaching gel activation with low-intensity red laser was capable of increasing the effectiveness of bleaching treatment and did not increase pulp temperature to levels deleterious to the pulp. CLINICAL SIGNIFICANCE The application of a low-intensity red laser was effective for activating a bleaching gel with green dye, without any deleterious increases in pulpal temperature. (J Esthet Restor Dent 24:126134, 2012)

Affine Toda model coupled to matter and the string tension in 2D QCD

The sl(2) affine Toda model coupled to matter is shown to describe various features, such as the spectrum and string tension, of the low-energy effective Lagrangian of two-dimensional QCD (one flavor and N colors). The corresponding string tension is computed when the dynamical quarks are in the fundamental representation of SU(N) and in the adjoint representation of SU(2).

Black and green pigments based on chromium-cobalt spinels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sol-gel synthesis and characterization of Fe(2)O(3) center dot CeO(2) doped with Pr ceramic pigments

Undoped x center dot alpha-Fe(2)O(3) y center dot CeO(2) and doped with praseodymium ceramic pigments were obtained by the sol-gel method after heat treatment at 800 degrees C for 2 h. These pigments were characterized by XRD, nitrogen adsorption, scanning electron microscopy, ultraviolet-visible absorption spectroscopy and colorimetrical measurements. Red and brown colors with several tonalities were observed after changes with Ce and Pr concentration.

Multicolor up conversion emission and color tunability in Yb3+/Tm3+/Ho3+ triply doped heavy metal oxide glasses

Multicolor and white light emissions have been achieved in Yb3+, Tm3+ and Ho3+ triply doped heavy metal oxide glasses upon laser excitation at 980 nm. The red (660 nm), green (547 nm) and blue (478 nm) up conversion emissions of the rare earth (RE) ions triply doped TeO2-GeO2-Bi2O3-K2O glass (TGBK) have been investigated as a function of the RE concentration and excitation power of the 980 nm laser diode. The most appropriate combination of RE in the TGBK glass host (1.6 wt% Yb2O3, 0.6 wt% Tm2O3 and 0.1 wt% Ho2O3) has been determined with the purpose to tune the primary colors (RGB) respective emissions and generate white light emission by varying the pump power. The involved infrared to visible up conversion mechanisms mainly consist in a three-photon blue up conversion of Tm3+ ions and a two-photon green and red up conversions of Ho3+ ions. The resulting multicolor emissions have been described according to the CIE-1931 standards. (C) 2011 Elsevier B.V. All rights reserved.

Microdureza de resinas em função da cor e luz halógena

O objetivo desse trabalho foi avaliar a influência da intensidade da luz e cor de uma resina composta no grau de dureza Knoop. Corpos-de-prova foram confeccionados utilizando-se matrizes de poliéster envoltas por um anel de cobre, contendo uma cavidade padronizada de 6 mm de diâmetro por 2 mm de espessura. Estas cavidades foram preenchidas com resina composta selecionada, Fill Magic - Vigodent, com as cores A3, B3, C3, D3 e I, fotopolimerizadas através de um fotopolimerizador Elipar, calibrado para produzir 3 intensidades de luz diferentes: 450 mW/cm², 800 mW/cm² e uma intensidade de luz crescente de 100 a 800 mW/cm². Foram confeccionados 90 corpos-de-prova em que o tempo de exposição da resina à luz halógena foi de 40 s. As amostras foram armazenadas em tubos de ensaio com água destilada a 37 ± 1ºC. Após este período, foram realizados os testes de dureza Knoop na região de superfície e fundo. Os resultados mostraram que houve diferença estatística em relação a intensidade de luz, entretanto em relação a cor, não houve diferença estatística. Os autores concluíram que a cor do compósito não influencia a dureza Knoop e que a intensidade progressiva promoveu os melhores resultados de dureza Knoop.