Automobile friction materials: a test instrument and technique for determining dynamic mechanical properties in relation to brake squeal

This study is primarily concerned with the problem of break-squeal in disc brakes, using moulded organic disc pads. Moulded organic friction materials are complex composites and due to this complexity it was thought that they are unlikely to be of uniform composition. Variation in composition would under certain conditions of the braking system, cause slight changes in its vibrational characteristics thus causing resonance in the high audio-frequency range. Dynamic mechanical propertes appear the most likely parameters to be related to a given composition's tendency to promote squeal. Since it was necessary to test under service conditions a review was made of all the available commercial test instruments but as none were suitable it was necessary to design and develop a new instrument. The final instrument design, based on longitudinal resonance, enabled modulus and damping to be determined over a wide range of temperatures and frequencies. This apparatus has commercial value since it is not restricted to friction material testing. Both used and unused pads were tested and although the cause of brake squeal was not definitely established, the results enabled formulation of a tentative theory of the possible conditions for brake squeal. The presence of a temperature of minimum damping was indicated which may be of use to braking design engineers. Some auxilIary testing was also performed to establish the effect of water, oil and brake fluid and also to determine the effect of the various components of friction materials.

A Comparison Between Graphene and WS2 as Solid Lubricant Additives to Aluminum for Automobile Applications

The purpose of this thesis was to compare graphene nanoplatelets (GNP) and WS2 as solid lubricant additives to aluminum in order to reduce friction and wear. The central hypothesis of this work relied on lubricating properties of 2D materials, which consist layers that slip under a shear force. Two aluminum composites were made (Al-2 vol.% GNP and Al-2 vol.% WS2) by spark plasma sintering. Tribological properties were evaluated by ball-on-disk wear tests at room temperature (RT) and 200°C. WS2 not only presented the lowest COF (0.66) but also improved the wear resistance of aluminum by 54% at RT. Al-2 vol.% GNP composite displayed poor densification (91%) and low hardness resulting in poor wear resistance. The wear rate of Al-2 vol.% GNP composite increased by 233% at RT and 48% at 200°C as compared to pure aluminum. GNP addition also resulted in lower COF (0.79) as compared to pure aluminum (0.87).

Pricing Automobile Fuel Economy : A New Hedonic Approach

Publisher PDF

Les IgG et les IgE spécifiques aux isocyanates chez les apprentis en carrosserie automobile à risque de développer de l'asthme professionnel

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Les IgG et les IgE spécifiques aux isocyanates chez les apprentis en carrosserie automobile à risque de développer de l'asthme professionnel

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

AUTO-RUINS. Thinks about automobile into the contemporary landscape

The article analyses the evolution of the representation of the automobile inserted in the natural and urban environment in the Contemporary Art, from the appearance of the first cars in the beginning of the 20th century until the present day. The text compares the diverse attitudes and analysis of some representative artists who have used the image of the machine in general and the car in particular in their aesthetic discourse, using as a conductive thread the metaphor of the life cycle (birth, growth, feeding, reproduction and death). It deals with the discovery, the development and the coexistence between human and the automobile and its interpretation as a basic element of the artistic work. The text connects the image of the automobile located in the contemporary industrial landscape utilizing the artist references who have integrated the car in their work inside the natural or artificial environment characteristic of each moment. At the same time, the article goes deeply into the relationship of romantic ruin and natural landscape and the evolution of the industrial and architectural modern environment, through the work of the artists who has used the car as an inhabitant of the landscape.

Recovery of palladium from a spent automobile catalyst leaching solution by a thiodiglycolamide derivative

In the sequence of previous research on the development of novel liquid-liquid amidetype compounds to efficiently and selectively extract platinum-group metals (PGMs) from concentrated hydrochloric acid media, a specific thiodiglycolamide derivative – N,N’-dimethyl-N,N’-dicyclohexylthiodiglycolamide (DMDCHTDGA) – has been applied for the recovery of palladium(II) from a spent automobile catalyst leaching solution, containing palladium(II) and rhodium(III) as PGMs. The results obtained are rather promising, since the DMDCHTDGA behavior towards the two PGMs is similar to that observed for hydrochloric acid aqueous media studied before, simulating the real leaching phases. Within eleven metal elements co-existing in solution, the majority in high fold-excesses, only aluminum(III) and cerium(III) interfere in the palladium(II) liquid-liquid extraction process, requiring further optimization.

A golden anniversary, 1895-1945. Personal side lights of America's first automobile race.

Mode of access: Internet.

B2C Digital business presence in the automobile industry

The purpose of this work is to investigate the digital online- and website- presence of the international automobile industry. The focus is on the business-to-consumer area to find out how digital communication is designed and if there are differences in the design dependent on the type of company or its cultural origin. The research is based on different quantitative as well as qualitative studies. After the selection and validation of the test sample, a qualitative content analysis for each corporate website in the test sample is conducted. Then, an extensive quantitative content analysis is applied. In a third step interviews with nine different experts from different sectors of the automobile company are carried out to validate the previous findings and obtain deeper insights. All of the findings are statistically analyzed and comprehensively evaluated.

Online presence of the international automobile industry: evaluation of the digital business representation in the business to consumer section of the international automobile industry

Tesis inédita presentada en la Universidad Europea de Madrid. Facultad de Ciencias Sociales. Programa de Doctorado en Economía y Empresa

Análise epidemiológica das fraturas acetabulares

This aim of this work was to carry out an epidemiological study on acetabular fractures in the city of Campinas and surrounds, in view of the few published papers on this subject. Medical files with a diagnosis of acetabular fracture between the years 2004 and 2008 that were made available by the Medical Archiving Service of Hospital das Clínicas, State University of Campinas (UNICAMP) were analyzed by six observers. Data on patients' ages, sex, side affected by the fracture, mechanism of injury, material used for synthesis, complications of the operation, associated fractures, length of hospitalization before and after the surgery, time of total internment and number of physiotherapy sessions before and after the surgery were gathered. It was observed in this population that the left side was more affected; the mechanism of injury that most often caused this type of fracture was automobile accidents; injuries to the sciatic nerve were the commonest surgical complications; and the synthesis material most used was reconstruction plates.

Acidentes de trânsito causando vítimas: possível reflexo da lei seca nas internações hospitalares

Os acidentes de trânsito no Brasil se constituem em relevante problema para a área da saúde. Nesse sentido, julgou-se importante investigar qual o efeito da lei 11.705 de 19 de junho de 2008, a chamada Lei seca. A metodologia do trabalho constitui analisar os dados do Sistema de Informações Hospitalares do SUS, para o Brasil, em 2008, comparando as internações nos dois semestres do ano, segundo algumas variáveis consideradas importantes. Os resultados mostraram que houve uma queda de 28,3 por cento nas internações do segundo semestre, com reflexos consideráveis em todas as variáveis estudadas. Quanto à qualidade da vítima, a maior queda ocorreu entre os ocupantes de automóvel, principalmente do sexo masculino. Em relação às idades, houve declínio em todas as faixas, destacando-se as de 40 a 59 anos e 20 a 39 anos, pela ordem. O tempo de permanência na instituição foi menor no segundo semestre,quando a mortalidade hospitalar declinou 13,6 por cento em relação ao primeiro semestre, o que significa que deixaram de morrer 917 pessoas (cerca de 5 mortes/dias). O gasto governamental para o atendimento dos feridos no segundo semestre foi 35,5 por cento menor do que no primeiro