Condições de saúde bucal e autopercepção de saúde bucal da população do grupo etário de 65-74 anos da região da serra/Rio Grande do Sul (RS)

Este estudo tem como objetivo compreender a autopercepção das condições de saúde bucal do grupo etário de 65-74 anos da Região da Serra/RS. Utilizou dados do SBBrasil, coletados pela SES/RS. A população final da amostra foi constituída de 618 idosos, sendo 57% de mulheres. Esta coleta foi realizada através de um questionário com questões fechadas sobre dados sócio-demográficos e questões de autopercepção em saúde bucal, bem como de um exame bucal. A análise dos dados foi feita através da regressão logística multinomial. O exame clínico revelou que quase a metade dos idosos está desdentada e classificou sua saúde bucal como boa ou ótima. Em relação a presença de dor, 28,8% dos indivíduos relataram que sentiram dor nos seis meses que antecederam a entrevista. A dor permaneceu estatisticamente associada à classificação da saúde bucal (OR= 2,3; IC95%: 1,24-4,44) e da mastigação (OR=1,9; IC%95: 1,07-3,24). A necessidade de prótese total permaneceu associada, após o ajuste, com a classificação da aparência dos dentes e gengiva (OR=0,3; IC95%: 0,11-0,78), da mastigação (OR=0,2; IC95%: 0,09- 0,46) e da autopercepção da influência da saúde bucal nos relacionamentos (OR=3,4; IC95%: 1,47-7,75). A renda pessoal manteve associação, após o ajuste, com a classificação da fala (OR=4,5; IC95%: 1,34- 15,12). A escolaridade, após o ajuste, manteve associação com a autopercepção da influência da saúde bucal nos relacionamentos (OR=1,9; IC95%: 1,06-3,43). Conclui-se que a dor e a necessidade de prótese total têm forte relação com as questões de autopercepção em saúde bucal.

Dinâmica do tebuthiuron em palha de cana-de-açúcar

O tebuthiuron é um herbicida residual amplamente utilizado em cana-de-açúcar cultivada no sistema tradicional. em áreas de cana-crua, o comportamento desse herbicida na palha deixada sobre o solo não é muito conhecido. Para melhor entender esse comportamento, avaliou-se neste trabalho a dinâmica do tebuthiuron aplicado sobre a palha de cana-de-açúcar em diferentes períodos e intensidades de chuvas após a aplicação. Foram conduzidos quatro experimentos instalados em delineamento experimental inteiramente casualizado, com quatro repetições. No primeiro, avaliou-se a interceptação do herbicida tebuthiuron no momento da aplicação sobre 0, 1, 2, 4, 6, 8, 10, 15 e 20 t ha-1 de palha de cana-de-açúcar. No segundo, foi avaliada a passagem do herbicida em 5, 10 e 15 t ha-1 de palha, simulando-se o equivalente a 2,5, 5, 10, 15, 20, 35, 50 e 65 mm de chuva, um dia após a aplicação (DAA). No terceiro, estudou-se o efeito de diferentes períodos de permanência (0, 1, 7, 14 e 28 DAA) do tebuthiuron na palha (10 t ha-1) antes da aplicação das mesmas precipitações simuladas no segundo estudo, acrescentando-se ainda mais uma simulação de 20 mm aos 7 e aos 14 dias após a aplicação do herbicida e das lâminas acumuladas de 65 mm. No quarto, avaliou-se a transposição do herbicida aplicado a 10 t ha-1 de palha, recebendo posteriormente uma lâmina de chuva de água de 20 mm e, no outro tratamento, uma irrigação de vinhaça de 20 mm, um dia após a aplicação. A quantificação do tebuthiuron foi realizada por cromatografia líquida de alta eficiência (CLAE). Nos estudos de dinâmica observou-se que, quanto maior a quantidade de palha, menor é a quantidade de produto que a transpõe no momento da aplicação. No segundo ensaio, pôde-se observar que, quanto maior a quantidade de palha, menor é a quantidade total extraída na simulação da precipitação. Para o terceiro estudo, os resultados indicaram que, quanto maior o tempo que o produto permanece na palha antes da ocorrência de chuva, menor é a extração total do produto com 65 mm de precipitação. Para as chuvas de 20 mm aos 7 e 14 dias após aplicação do herbicida e da lâmina de 65 mm para cada período, no terceiro ensaio, observou-se extração de quantidades mínimas do herbicida. A utilização de vinhaça como chuva simulada proporcionou aumento de 17% do tebuthiuron lixiviado, quando comparado com a mesma quantidade de chuva simulada com água.

Preparation of polymeric micelles for use as carriers of tuberculostatic drugs

Purpose: This paper focuses on the characterization of polymeric micelle-forming tuberculostatic prodrugs and the antimycobacterial activity of these prodrugs.Method: By the condensation of hydroxymethylpyrazinamide, isoniazid and rifampin with free carboxyl groups on the copolymer poly(ethyleneglycol)-poly(aspartic acid), micelle-forming carrier-drug conjugates were obtained. These micelles were characterized by dynamic light scattering, to measure the micelle diameter; by acid-base titration, to determine the percentage of carboxylic groups occupied by the tuberculostatic; by Sudan III solubility tests, to estimate the critical micelle concentration (CMC); and visual control and spectrophotometric measurement, to determine the stability of micelles. These micelles were tested in vitro against several Mycobacterium strains.Results: As expected, the size and distribution of the micelle-forming tuberculostatic prodrugs found to be small (78.2nm, 84.2nm and 98.9 nm) while the level of the drug conjugated was high (65.02-85.7%). Furthermore, the micelles were stable in vitro, exhibiting a low level of CMC and stronger antimycobacterial activity than the original drugs.Conclusion: the results demonstrate that polymeric micelles can be used as efficient carriers for drugs, which alone, exhibit undesired pharmacokinetics, poor solubility, and low stability. The synthesized micelle-forming tuberculostatic prodrugs opens a perspective of alternative prodrugs that prolong action and decrease the toxicity of the tuberculostatic drugs of choice.

A comparative expression analysis of gene transcripts in brain tissue of non-transgenic and GH-transgenic zebrafish (Danio rerio) using a DDRT-PCR approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genomic Strategy Identifies a Missense Mutation in WD-Repeat Domain 65 (WDR65) in an Individual With Van der Woude Syndrome

Genetic variation in the transcription factor interferon regulatory factor 6 (IRF6) causes and contributes risk for oral clefting disorders. We hypothesized that genes regulated by IRF6 are also involved in oral clefting disorders. We used five criteria to identify potential IRF6 target genes; differential gene expression in skin taken from wild-type and Irf6-deficient murine embryos, localization to the Van der Woude syndrome 2 (VWS2) locus at 1p36-1p32, overlapping expression with Irf6, presence of a conserved predicted-binding site in the promoter region, and a mutant murine phenotype that was similar to the Irf6 mutant mouse. Previously, we observed altered expression for 573 genes; 13 were located in the murine region syntenic to the VWS2 locus. Two of these genes, Wdr65 and Stratifin, met 4 of 5 criteria. Wdr65 was a novel gene that encoded a predicted protein of 1,250 amino acids with two WD domains. As potential targets for Irf6 regulation, we hypothesized that disease-causing mutations will be found in WDR65 and Stratifin in individuals with VWS or VWS-like syndromes. We identified a potentially etiologic missense mutation in WDR65 in a person with VWS who does not have an exonic mutation in IRF6. The expression and mutation data were consistent with the hypothesis that WDR65 was a novel gene involved in oral clefting. (C) 2011 Wiley-Liss, Inc.

Structural and magnetic characterization of MnxZn1-xFe2O4 (x=0.2; 0.35; 0.65; 0.8; 1.0) ferrites obtained by the citrate precursor method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate

ZrTiO4 (ZT), obtained by the Pechini method, was used as precursor for obtaining PLZT (lead lanthanum zirconium titanate). An aqueous solution of oxalic acid was prepared with particles of ZT, Pb(NO3)(2) and La2O3. After the PbC2O4 and La2O3 precipitate on ZT particles, the materials were calcined and X-ray diffraction (XRD) showed the cubic phase of PLZT. This material was sintered, in two steps, and a density of about 8.0 g/cm(3) was obtained. After the second sintering the XRD pattern showed the occurrence of tetragonal and rhombohedral phases. This was caused by a stoichiometric deviation and the material showed a high optical transparency. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Structural characterization of organometallic-derived 9.5/65/35 PLZT ceramics

This study consisted of an investigation of the influence of powder preparation on the phase and chemical compositions and microstructure of 9.5/65/35 PLZT materials sintered in an oxygen atmosphere. The powders with the formula Pb0.905La0.095(Zr0.65Ti0.35)(0.976)O-3+3.5 wt.% PbO were prepared by the polymeric organometallic precursor method (the Pechini method and the partial oxalate procedure). Phase composition was determined by X-ray diffraction of powder and EDS analysis, while grain size was determined based on the micrograph obtained from SEM. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Sintering and characterization of PLZT (9/65/35)

PLZT(9/65/35) obtained by association between the Pechini method (ZT) and partial oxalate (PLZT) was prepared. The stoichiometric phase and monophasic (cubic) PLZT obtained by calcination did not occur after sintering. The sintering process, by using two stages, caused a liquid phase formation due to a PbO excess (5 and 10 wt%). Samples with high density (similar to 8 g/cm(3)) and optical transparency(similar to 12%) were obtained. However, an equilibrium between the excess of PbO of sample/atmosphere PbO leads to a segregated PbO phase on the boundaries of the microstructure. A diffusion of Zr, Ti and La ions from PLZT to PbO phase promoted a stoichiometric deviation of the matrix and modified the optical and dielectric characteristics. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Synthesis and characterization of 9.5/65/35 PLZT prepared from the polymeric precursors

The 9.5/65/35 PLZT was prepared from the polymeric precursors (the Pechini and partial oxalate process) and by sintering in two stages in an oxygen atmosphere. After thermal treatment at 400 degreesC, the powders were calcinated and sintered at 1200 degreesC with slow heating and cooling rates. The second stage of sintering consisted of hot pressing at the same temperature in oxygen atmosphere. After calcination of PLZT powders obtained by both methods, as well as after sintering of PLZT obtained by Pechini process, the paraelectric cubic phase was formed. After sintering of PLZT obtained by partial oxalate procedure, small tetragonality of crystal structure was observed. After hot pressing PLZT was pseudocubic. SEM microstructural analyses were carried out of the sintering and hot pressed samples and indicated the small grain size less than 2 mum. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Hot-pressed 9.5/65/35 PLZT prepared by the polymeric precursor method

A 9.5/65/35 PLZT ceramic with a Pb-0.905 La-0.095 (Zr-0.65 Ti-0.35)(0.976) O-3 + 35 w% PbO formula was prepared using the Pechini method for powder preparation and two-step sintering in an oxygen atmosphere. Thr first step consisted of sintering at 1200 degrees C for 4 h with slow heating and cooling rates. The second step consisted of hot pressing at 1200 degrees C for 3 h, with slow heating and cooling rates and pressing pressures of 20 MPa (initial pressure) and 40 MPa (at sintering temperature). Investigations were made of the powder phase formation and powder morphology, i.e. The structure of sintered and hot-pressed PLZT ceramics. SEM microstructural analyses were carried out on the sintering and hot-pressing processes. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Preparation of 9/65/35 PLZT thin films deposited by a dip-coating process

Crack-free polycrystalline PLZT (Pb,a)(Zr,Ti)O-3 thin films with the perovskite structure were prepared by dir-coating using the Pechinis process. Lead acetate, hydrated lanthanum carbonate, zirconium n-propoxide and titanium isopropoxide were used as raw materials. The viscosity of the solution was adjusted in the range of 20 to 56 cP and the films were deposited by a dip-coating process on silicon (100) as substrate. Solutions with ionic concentration of 0.1 and 0.2 M were used. Thin film deposition was accomplished by dipping the substrates in the solution with control of withdrawal speed from 5 to 20 mm/min. The thin films were thermally treated in two steps: at 300 degreesC amid 650 degreesC. The influence of withdrawal speed. viscosity, heating rate and ionic concentration on the morphology of PLZT thin film was discussed. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

NO EVIDENCE of PATHOLOGICAL AUTOIMMUNITY FOLLOWING MYCOBACTERIUM LEPRAE HEAT-SHOCK PROTEIN 65-DNA VACCINATION IN MICE

Heat-shock proteins (HSPs) are currently one of the most promising targets for the development of immunotherapy against tumours and autoimmune disorders. This protein family has the capacity to activate or modulate the function of different immune system cells. They induce the activation of monocytes, macrophages and dendritic cells, and contribute to cross-priming, an important mechanism of presentation of exogenous antigen in the context of MHC class I molecules, These various immunological properties of HSP have encouraged their use in several clinical trials. Nevertheless, an important issue regarding these proteins is whether the high homology among HSPs across different species may trigger the breakdown of immune tolerance and induce autoimmune diseases. We have developed a DNA vaccine codifying the Mycobacterium leprae Hsp65 (DNAhsp65), which showed to be highly immunogenic and protective against experimental tuberculosis. Here, we address the question of whether DNAhsp65 immunization could induce pathological autoimmunity in mice. Our results show that DNAhsp65 vaccination induced antibodies that can recognize the human Hsp60 but did not induce harmful effects in 16 different organs analysed by histopathology up to 210 days after vaccination. We also showed that anti-DNA antibodies were not elicited after DNA vaccination. The results are important for the development of both HSP and DNA-based immunomodulatory agents.

Serum titres of anti-glutamic acid decarboxylase-65 and anti-IA-2 autoantibodies are associated with different immunoregulatory milieu in newly diagnosed type 1 diabetes patients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)