Synthese, biochemische und physikochemische Charakterisierung von Liganden der Glycin-Bindungsstelle des NMDA-Rezeptors

Die exzitatorische Neurotransmission erfolgt über ionotrope Glutamat-Rezeptoren von denen dem NMDA-(N-Methyl-D-aspartat)-Rezeptor durch seine hohe Leitfähigkeit für Ca2+-Ionen eine besondere Rolle zugesprochen wird. Bei seiner Überaktivierung kommt es zu exzitotoxischen Prozessen, die direkt mit neurodegenerativen Erkrankungen einhergehen und nach einem Schlaganfall, bei akuten Epilepsien, Morbus Parkinson, Alzheimer Demenz aber auch im Bereich der neuropathischen Schmerzentstehung eine wichtige Rolle spielen.rnDurch das Eingreifen in die glutamatvermittelten pathologischen Prozesse verspricht man sich daher die Möglichkeit einer Neuroprotektion bei der Therapie verschiedener neurodegenerativer Erkrankungen, die primär auf völlig unterschiedliche Ursachen zurückzuführen sind.rnAusgehend von in früheren Arbeiten synthetisierten Hydantoin-substituierten Dichlor-indol-2-carbonsäure-Derivaten, die hochaffine Eigenschaften zur Glycin-Bindungsstelle des NMDA-Rezeptors aufweisen, sollten neue Derivate entwickelt und untersucht werden, die hinsichtlich ihrer Affinität zur Glycin-Bindungsstelle des NMDA-Rezeptors, ihrer Pharmakokinetik sowie physikochemischen Parameter in präparativ-organischen, radiopharmazeutischen und zell- bzw. tierexperimentellen Studien in vitro sowie in vivo charakterisiert werden sollten. Von besonderem Interesse war dabei die Evaluierung der synthetisierten Verbindungen in einem Verdrängungsassay mit dem Radioliganden [3H]MDL105,519 mit dem der Einfluss der strukturellen Modifikationen auf die Affinität zur Glycin-Bindungsstelle des Rezeptors untersucht wurde, sowie die Selektivität und die Potenz der Liganden abgeschätzt wurde.rnIm Rahmen der Struktur-Wirkungs-Untersuchungen mit Hilfe der Bindungsexperimente konnten bestimmte Strukturmerkmale als essentiell herausgestellt bzw. bekräftigt werden. Die Testverbindungen zeigten dabei IC50-Werte im Bereich von 0,0028 bis 51,8 μM. Die entsprechenden Ester dagegen IC50-Werte von 23,04 bis >3000 μM. Als vielversprechende Strukturen mit Affinitäten im niedrigen nanomolaren Bereich stellten sich Derivate mit einer 4,6-Dichlor-oder Difluor-Substitution am Indolgrundgerüst (2,8 bis 4,6 nM) heraus. Auch die Substitution des Phenylhydantoin-Teils durch das bioisostere Thienylhydantoin führte zu einer gleichbleibenden ausgeprägten Affinität (3,1 nM). rnZur Abschätzung der Bioverfügbarkeit, insbesondere der Fähigkeit zur Überwindung der Blut-Hirn-Schranke, wurden die Lipophilien bei einer Auswahl der Testverbindungen durch Bestimmung ihrer log P-Werte ermittelt. Neben dem Verfahren der potentiometrischen Titration wurde eine HPLC-Methode an einer RP-Phase verwendet.rnUm das Zytotoxizitätsprofil der synthetisierten Strukturen frühzeitig abschätzen zu können, wurde ein schnell durchführbares, zellbasiertes in vitro-Testsystem, der kommerziell erhältliche „Cell Proliferation Kit II (XTT-Test)“, eingesetzt. rnIm Rahmen von Positronen-Emissions-Tomographie-Experimenten an Ratten wurde eine Aussage bezüglich der Aufnahme und Verteilung eines radioaktiv markierten, hochaffinen Liganden an der Glycinbindungsstelle des NMDA-Rezeptors im Gehirn getroffen. Dabei wurden sowohl ein Carbonsäure-Derivat sowie der korrespondierende Ethylester dieser Testung unterworfen.rn

Auxiliar-vermittelte stereoselektive Totalsynthese von neurotoxischen Tetraponerinen

In der vorliegenden Arbeit wurde eine neue Strategie zur stereoselektiven Synthese von Tetraponerinen entwickelt. Hierzu wurde die Kohlenhydrat-Auxiliar gesteuerte Tandem-Mannich-Michael-Reaktion als Schlüsselschritt der Totalsynthese eingesetzt. Die synthetisierten Tetraponerine wurden in biologischen Prüfungen auf neurotoxische und insektizide Aktivität untersucht. Zur Darstellung von (+)-Tetraponerin-8 wurde zunächst ausgehend von trans-2-Octensäure in sieben linearen Stufen ein chiraler beta-Amino-Aldehydbaustein synthetisiert. Dieser wurde in einer Tandem-Mannich-Michael-Reaktion mit dem Auxiliar 2,3,4-Tri-O-pivaloyl-alpha-D-arabinopyranosylamin und dem Danishefsky-Dien zur Reaktion gebracht und lieferte stereoselektiv das entsprechende 2-substituierte N-Arabinosyl-dehydropiperidinon. Nach weiterer Umsetzung des Dehydropiperidinons konnte (+)-Tetraponerin-8 in einer Gesamtausbeute von 0.6 % über 17 lineare Stufen dargestellt werden. Der Ringschluss zum tricyclischen Aminal wurde alternativ auch über die Freisetzung eines cyclischen Acetals durch saure Hydrolyse durchgeführt. Diese Syntheseroute lieferte (+)-Tetraponerin-8 in einer Gesamtausbeute von 3 % über 19 lineare Stufen.rnrnUm den Einfluss eines Stereozentrums im Aldehyd auf den stereochemischen Verlauf der Tandem-Mannich-Michael-Reaktion zu untersuchen, wurde auch das spiegelbildliche Enantiomer des chiralen beta-Amino-Aldehydbausteins synthetisiert und zur Darstellung von N-Arabinosyl-dehydropiperidinon herangezogen. Hierbei ergab sich ein „mismatched“-Fall unter Bildung eines Diastereomeren-Gemisches im Verhältnis 2:1. Nach einer Cyclisierung über ein cyclisches Acetal konnte (+)-Tetraponerin-7 über 19 lineare Stufen in einer Gesamtausbeute von 0.6 % dargestellt werden. Darüber hinaus wurde auch die racemische Form von Tetraponerin-8 nach einer literaturbekannten Synthese dargestellt, um dessen biologische Wirksamkeit mit der der enantiomerenreinen Verbindung vergleichen zu können.

Systematic functionalization of molecules for molecular self-assembly

This thesis describes the investigation of systematically varied organic molecules for use in molecular self-assembly processes. All experiments were performed using high-resolution non-contact atomic force microscopy under UHV conditions and at room temperature. Using this technique, three different approaches for influencing intermolecular and molecule-surface interaction on the insulating calcite(10.4) surface were investigated by imaging the structure formation at the molecular scale. I first demonstrated the functionalization of shape-persistent oligo(p-benzamide)s that was engineered by introducing different functional groups and investigating their effect on the structural formation on the sample surface. The molecular core was designed to provide significant electrostatic anchoring towards the surface, while at the same time maintaining the flexibility to fine-tune the resulting structure by adjusting the intermolecular cohesion energy. The success of this strategy is based on a clear separation of the molecule-substrate interaction from the molecule-molecule interaction. My results show that sufficient molecule-surface anchoring can be achieved without restricting the structural flexibility that is needed for the design of complex molecular systems. Three derivatives of terephthalic acid (TPA) were investigated in chapter 7. Here, the focus was on changing the adhesion to the calcite surface by introducing different anchor functionalities to the TPA backbone. For all observed molecules, the strong substrate templating effect results in molecular structures that are strictly oriented along the calcite main crystal directions. This templating is especially pronounced in the case of 2-ATPA where chain formation on the calcite surface is observed in contrast to the formation of molecular layers in the bulk. At the same time, the amino group of 2-ATPA proved an efficient anchor functionality, successfully stabilizing the molecular chains on the sample surface. These findings emphasizes, once again, the importance of balancing and fine-tuning molecule-molecule and molecule-surface interactions in order to achieve stable, yet structurally flexible molecular arrangements on the sample surface. In the last chapter, I showed how the intrinsic property of molecular chirality decisively influences the structure formation in molecular self-assembly. This effect is especially pronounced in the case of the chiral heptahelicene-2-carboxylic acid. Deposition of the enantiopure molecules results in the formation of homochiral islands on the sample surface which is in sharp contrast to the formation of uni-directional double rows upon deposition of the racemate onto the same surface. While it remained uncertain from these previous experiments whether the double rows are composed of hetero- or homochiral molecules, I could clearly answer that question here and demonstrate that the rows are of heterochiral origin. Chirality, thus, proves to be another important parameter to steer the intermolecular interaction on surfaces. Altogether, the results of this thesis demonstrate that, in order to successfully control the structure formation in molecular self-assembly, the correct combination of molecule and surface properties is crucial. This is of special importance when working on substrates that exhibit a strong influence on the structure formation, such as the calcite(10.4) surface. Through the systematic variation of functional groups several important parameters that influence the balance between molecule-surface and molecule-molecule interaction were identified here, and the results of this thesis can, thus, act as a guideline for the rational design of molecules for use in molecular self-assembly.

Synthese cyclischer Peptide und von Kohlenhydraten abgeleitete Katalysatoren zur enantioselektiven Darstellung von Cyanhydrinen

Der Suche nach neuen Wirkstoffen für den chemischen Pflanzenschutz kommt insbesondere vor dem Hintergrund der steigenden Weltbevölkerung und weniger zur Verfügung stehenden kulturfähigen Ackerflächen eine stetig wachsende Bedeutung zu. Ziel dieser Arbeit war die Synthese von cyclischen Peptiden und Depsipeptiden, die aufgrund ihrer biologischen Aktivität als potentielle Insektizide für den chemischen Pflanzenschutz in Frage kommen. Darüber hinaus sollten von Kohlenhydraten abgeleitete Katalysatoren zur enantioselektiven Cyanhydrinsynthese entwickelt werden, um einen leichten Zugang zu den Bausteinen der Depsipeptide zu ermöglichen. Als vielversprechender Naturstoff mit insektiziden Eigenschaften gilt das cyclische Pentapeptid Cycloaspeptid E, dessen Totalsynthese in 10 Stufen mit einer Gesamtausbeute von 25% erreicht wurde, sodass die Verbindung für biologische Tests bereitgestellt werden konnte. Zusätzlich gelang die Kristallisation der Verbindung, was eine Röntgenstrukturanalyse ermöglichte. Ein Derivat von Cycloaspeptid E sollte 2-Aminonicotinsäure anstelle von Anthranilsäure enthalten. Die Synthese dieser Verbindung wurde auf drei Wegen versucht. Dabei zeigte sich, dass es bei einer zur Totalsynthese des Naturstoffs analogen Strategie zur quantitativen Bildung eines Diketopiperazins kommt. Auf den anderen Routen ließ sich entweder ein Kupplungsschritt nicht realisieren, oder die Verbindung erwies sich unter den gewählten Bedingungen als instabil. Die Darstellung eines 2-Aminonicotinsäure-Derivats von Cycloaspeptid E bleibt daher weiterhin ein ungelöstes Problem, das weiterer Forschung bedarf. Verticilid A1 ist ein cyclisches Depsipeptid, das aufgrund seiner Bindungsfähigkeit an den Ryanodinrezeptor von Insekten, als Leitstruktur für die Suche nach neuen Insektiziden von Interesse ist. Um zu untersuchen, wie wichtig die Esterbindungen im Molekül für die biologische Aktivität sind, sollte das entsprechende Amid-Derivat und das Cyclodepsipeptid mit nur zwei statt vier Esterbindungen hergestellt werden. Hierbei zeigte sich, dass eine zur Darstellung von Verticilid A1 analoge Syntheseroute zu einer ausgeprägten Epimerisierung führt. Eine lineare Synthese der Derivate endet in der Bildung des Diketopiperazins. Weiterhin wurden zwei neue, zueinander pseudoenantiomere Vanadium(IV)-Katalysatoren auf Basis von D-Glucose einerseits und L-Xylose andererseits dargestellt. Diese lassen sich in fünf bzw. 14 Stufen synthetisieren und liefern in der enantioselektiven Katalyse von Mandelsäurenitril Enantiomerenüberschüsse von 89% bzw. 91% bei hohen Ausbeuten. Zusammenfassend lässt sich feststellen, dass im Rahmen dieser Arbeit die Totalsynthese von Cycloaspeptid E erfolgreich durchgeführt wurde, und die Syntheseversuche von weiteren cyclischen Peptiden wichtige Erkenntnisse für weitere Synthesen lieferten. Mit den beiden hergestellten Vanadium(IV)-Komplexen wurden zwei potente, auf Kohlenhydraten basierende Katalysatoren für die enantioselektive Synthese von Cyanhydrinen entwickelt.

Biologisch aktive Sekundärmetabolite aus Pflanzen und Pilzen : Phenanthro-Alkaloide ; phytotoxische Dioxolanone

Als Phenanthro-Alkaloide wird eine kleine Gruppe von pentacyclischen, auf dem Phenanthren-Strukturmotiv basierenden Indolizidinen sowie Chinolizidinen bezeichnet. Von Letztgenannten sind bisher fünf, von den homologen Phenanthroindolizidinen mehr als sechzig natürliche Vertreter gefunden worden. Das wohl bekannteste Alkaloid in dieser Gruppe ist das Indolizidin-Alkaloid Tylophorin, das beispielsweise aus Tylophora indica (Apocynaceae, "Hundsgiftgewächse") gewonnen werden kann. Tylophorin und verwandte Derivate besitzen potente biologische und physiologische Wirkungen. So entfalten sie sowohl antiinflammatorische als auch antineoplastische Effekte (wirksam auch bei MDR-Tumorzelllinien, MDR = "multi drug resistant").rnrnDas Ziel der vorliegenden Arbeit war es, neue Methoden zur Herstellung von Phenanthro-Alkaloiden und deren Derivaten zu entwickeln. Ausgehend von (S)-Prolin konnten sowohl (S)-(+)-Tylophorin (>99% ee) als auch ein bisher noch nicht beschriebenes Derivat, das sich durch eine deutlich geringere Lichtempfindlichkeit im Vergleich zu Tylophorin aus¬zeichnet, in 33%-iger Gesamtausbeute über neun lineare Stufen, hergestellt werden. Die Synthese von (R)-(-)-Tylophorin gelang in analoger Weise aus (R)-Prolin in 21%-iger Ausbeute (93% ee). Der Einsatz von Schutzgruppen war nicht notwendig.rnDer Schlüsselschritt ist in beiden Fällen eine Cyclisierung an eine C=N-Doppelbindung über freie Radikale, die bei der Synthese des neuen Derivats hochstereoselektiv zur Bildung des (13aS,14S) Diastereomers führt. Die Synthese von 7-Methoxycryptopleurin gelang durch eine ähnliche Synthesestrategie. rnrnZur Herstellung von Cryptopleurin ist zunächst ein neuer Syntheseweg für 9-(Hydroxymethyl)-2,3,6-trimethoxyphenanthren entwickelt worden. Dieser führt über den Aufbau eines Biphenylsystems durch palladiumkatalysierte Kreuzkupplung, eine anschließende COREY-FUCHS-Transformation und als Schlüsselschritt über eine Gold-NHC-Komplex katalysierte 6-endo-dig-Cyclisierung zum entsprechenden Phenanthren. Diese Ringschlussreaktion verläuft in gewünschter Weise regioselektiv unter Bildung des 2,3,6-trimethoxysubstituierten Phenanthrens. Die Bil¬dung des regioisomeren 2,3,8-Trimethoxyphenanthrens wird nicht beobachtet. Der Alkohol wird dann in fünf linearen Stufen (34%) in das Xanthogenat überführt, aus dem sich durch eine zweistufige Reaktionssequenz, bestehend aus einer Radikal¬cyclisierung nach ZARD und einer Reduktion mit LiAlH4 das extrem lichtempfindliche und hochtoxische Alkaloid (R)-(-)-Cryptopleurin gewinnen ließ (50%).rnNachdem beide Enantiomere und das Racemat von Tylophorin synthetisiert worden waren und zum Vergleich bereit standen, wurde Tylophorin aus Tylophora indica extrahiert. rnDie Motivation rührte unter anderem daher, dass in der bisherigen Literatur Unstimmigkeiten über das in der Natur vorkommende Enantiomer des Tylophorins herrschten. Vor Beginn dieser Arbeit ging man davon aus, dass in T. indica nur (R)-(-)-Tylophorin vorkommt und für die Diskrepanzen zwischen den berichteten Drehwerten von, aus Pflanzenmaterial isolierten und des synthetisierten Naturstoffs, dessen Zersetzung vor oder während der Messung verantwortlich ist. Dieser Effekt kann zwar auch beobachtet werden, jedoch trägt er nur in geringem Maße zur Erniederigung des Drehwertes bei. Schließlich sind Proben von synthetisiertem Tylophorin in gleichem Maße von der schnell eintretenden Oxidation des Alkaloids betroffen. Aus dem Rohextrakt ist Tylophorin durch RP-HPLC isoliert worden. Anschließend wurde die Probe mittels chiraler HPLC/MS analysiert. Durch den Vergleich mit den bereit stehenden synthetischen Proben von (R)- und (S)-Tylophorin konnte in dieser Arbeit erstmals experimentell belegt werden, dass es sich bei (−)-Tylophorin aus T. indica um ein scalemisches Gemisch im Verhältnis von 56:44 (R:S) handelt.rnrnDas Ziel dieses Teilprojektes war die Entwicklung einer Synthese für den bisher noch nicht synthetisch hergestellten phytotoxischen Sekundärmetabolit (+)-Phenguignardiasäure. Isoliert wurde diese Verbindung aus Guignardia bidwellii, dem Erreger der Schwarzfäule der Weinrebe. Die absolute Konfiguration des quartären Stereozentrums war zu Beginn dieser Arbeit nicht bekannt. Ausgehend von (R)-Phenylmilchsäure und 3-Phenylprop-2-in-1-ol gelang die Synthese beider Enantiomere des Dioxolanons in acht linearen Stufen. Sie liefert den experimentellen Beweis (ECD, Polarimetrie) für die (S)-Konfiguration von natürlicher (+)-Phenguignardiasäure.rnrn

Thickness of softened human enamel removed by toothbrush abrasion: an in vitro study

The aim of the study was to assess the thickness of softened enamel removed by toothbrushing. Human enamel specimens were indented with a Knoop diamond. Softening was performed with citric acid or orange juice. The specimens were brushed in a brushing machine with a manual soft toothbrush in toothpaste slurry or in artificial saliva. Enamel loss was calculated from the change in indentation depth of the same indent before and after abrasion. Mean surface losses (95% confidence interval) were recorded in treatment groups (in nanometers): (1) citric acid, abrasion with slurry = 339 (280-398); (2) citric acid, abrasion with artificial saliva = 16 (5-27); (3) orange juice, abrasion with slurry = 268 (233-303); (4) orange juice, abrasion with artificial saliva = 14 (5-23); (5) no softening, abrasion with slurry = 28 (10-46). The calculated thickness of the softened enamel varied between 254 and 323 nm, depending on the acid used.

Identification of noninvasive biomarkers for alcohol-induced liver disease using urinary metabolomics and the Ppara-null mouse

Alcohol-induced liver disease (ALD) is a leading cause of nonaccident-related deaths in the United States. Although liver damage caused by ALD is reversible when discovered at the earlier stages, current risk assessment tools are relatively nonspecific. Identification of an early specific signature of ALD would aid in therapeutic intervention and recovery. In this study, the metabolic changes associated with ALD were examined using alcohol-fed male Ppara-null mouse as a model of ALD. Principal components analysis of the mass spectrometry-based urinary metabolic profile showed that alcohol-treated wild-type and Ppara-null mice could be distinguished from control animals without information on history of alcohol consumption. The urinary excretion of ethyl-sulfate, ethyl-beta-d-glucuronide, 4-hydroxyphenylacetic acid, and 4-hydroxyphenylacetic acid sulfate was elevated and that of the 2-hydroxyphenylacetic acid, adipic acid, and pimelic acid was depleted during alcohol treatment in both wild-type and the Ppara-null mice albeit to different extents. However, indole-3-lactic acid was exclusively elevated by alcohol exposure in Ppara-null mice. The elevation of indole-3-lactic acid is mechanistically related to the molecular events associated with development of ALD in alcohol-treated Ppara-null mice. This study demonstrated the ability of a metabolomics approach to identify early, noninvasive biomarkers of ALD pathogenesis in Ppara-null mouse model.

The Use Of Amido- And Imido-Functionalized Alpha Hydroxy Acids In The Creation Of Biodegradable Polyesters: An Exploration Of Va

The purpose of this thesis was to synthesize biodegradable polyesters from a wide array of functionalized ¿-hydroxy acids. The initial strategy was to use amido-functionalized ¿-hydroxy acids and 2-bromopropanoyl bromide to form amido-functionalized cyclic diesters. Then, the resulting cyclic diesters would be used in ring opening polymerization to create biodegradable polyesters. However, the spontaneous rapid degradation of the secondary amido-functionalized cyclic diester structure, as seen with 2-benzamido-hydroxyacetic acid, limited ring formation to tertiary amido-functionalized ¿-hydroxy acids. Also, the hydrophilic nature of most ¿-hydroxy acids allowed water into the crystal structure of the ¿-hydroxy acid. Then, when the ¿-hydroxy acid was used in ring forming reactions, the associated water deactivated reactive reagents and limited cyclic diester synthesis. These issues led to the synthesis of hydrophobic and tertiary amido- and imido-functionalized ¿-hydroxy acids, 2-phthalimido-2-hydroxyacetic acid and 2-(1-oxoisoindolin-2-yl) hydroxyacetic acid. The new ¿-hydroxy acids were used in two new polymerization techniques, melt polycondensation and solution polymerization, instead of ring open polymerization. Melt polycondensation and solution polymerization had shown previous success in forming oligomers of amido-functionalized ¿-hydroxy acids. Melt polycondensation was conducted by heating the monomer past its melting temperature under reduced pressure. The uncatalyzed melt polycondensation of 2-(1-oxoisoindolin-2-yl) hydroxyacetic acid created polyesters (¿ 960 g/mol). The scandium(III) trifluoromethanesulfonate enhanced melt polycondensation polymerization created slightly larger oligomers (¿ 1340 g/mol). However, 2-phthalimido-2-hydroxyacetic acid was not compatible with melt polycondensation because thermal degradation occurred. Thus, solution polymerization was conducted via Steglich esterification. Only oligomeric functionalized polyesters were formed (¿ 1060 g/mol). Future work should focus on optimization of the catalyst and the reaction conditions to obtain higher molecular weight polyesters. Also, 2-(1-oxoisoindolin-2-yl) hydroxyacetic acid should be utilized in the cyclic diester synthesis technique.

Sulfoxides as an intramolecular sulfenylating agent for indoles and diverse applications of the sulfide-sulfoxide redox cycle in organic chemistry

This dissertation involves study of various aspects of sulfoxide chemistry. Specifically designed t-butyl and propanenitrile sulfoxides tethered to indole-2-carboxamide were used as a source of intramolecular sulfenylating agents to synthesize novel indolo[3,2-b]-1-5-benzothiazepinones which are structurally analogous to the other biologically active benzothiazepinones. This study reveals that the intramolecular cyclization of sulfoxide follows an electrophilic sulfenylation (Sulfoxide Electrophilic Sulfenylation, SES) reaction pathway. Evidence of the absence of sulfenic acid as a transient reactive intermediate in such intramolecular cyclization is also provided. In another study, sulfoxide was used as a “protecting group” of thioether to synthesize 8-membered, indole substituted, thiazocine-2-acetic acid derivative via Ring Closing Metathesis (RCM). Protection (oxidation) of inert (to RCM) sulfide to sulfoxide followed by RCM produced cyclized product in good yields. Deprotection (reduction) of sulfoxide was achieved using Lawessons Reagent (L.R.). Application of the sulfide-sulfoxide redox cycle to solve the existing difficulties in using RCM methodology to thioethers is illustrated. A new design of a “molecular brake”, based on the sulfide-sulfoxide redox cycle is described. N-Ar rotation in simple isoindolines is controlled by the oxidation state of the proximate sulfur atom. Sulfide [S(II)] shows “free” [brake OFF] N-Ar rotation whereas sulfoxide displayed hindered [brake ON] N-Ar rotation. The semi-empirical molecular orbital (PM3) calculations revealed concerted pyramidalization of amidic nitrogen with N-Ar rotation.

THE POTENTIAL OF INDUSTRIAL WASTE AND AGRICULTURAL FEEDSTOCK TOWARDS SUSTAINABLE BIOFUELS PRODUCTION: TECHNO-ECONOMIC AND ENVIRONMENTAL IMPACT PERSPECTIVES

This Ph.D. research is comprised of three major components; (i) Characterization study to analyze the composition of defatted corn syrup (DCS) from a dry corn mill facility (ii) Hydrolysis experiments to optimize the production of fermentable sugars and amino acid platform using DCS and (iii) Sustainability analyses. Analyses of DCS included total solids, ash content, total protein, amino acids, inorganic elements, starch, total carbohydrates, lignin, organic acids, glycerol, and presence of functional groups. Total solids content was 37.4% (± 0.4%) by weight, and the mass balance closure was 101%. Total carbohydrates [27% (± 5%) wt.] comprised of starch (5.6%), soluble monomer carbohydrates (12%) and non-starch carbohydrates (10%). Hemicellulose components (structural and non-structural) were; xylan (6%), xylose (1%), mannan (1%), mannose (0.4%), arabinan (1%), arabinose (0.4%), galatactan (3%) and galactose (0.4%). Based on the measured physical and chemical components, bio-chemical conversion route and subsequent fermentation to value added products was identified as promising. DCS has potential to serve as an important fermentation feedstock for bio-based chemicals production. In the sugar hydrolysis experiments, reaction parameters such as acid concentration and retention time were analyzed to determine the optimal conditions to maximize monomer sugar yields while keeping the inhibitors at minimum. Total fermentable sugars produced can reach approximately 86% of theoretical yield when subjected to dilute acid pretreatment (DAP). DAP followed by subsequent enzymatic hydrolysis was most effective for 0 wt% acid hydrolysate samples and least efficient towards 1 and 2 wt% acid hydrolysate samples. The best hydrolysis scheme DCS from an industry's point of view is standalone 60 minutes dilute acid hydrolysis at 2 wt% acid concentration. The combined effect of hydrolysis reaction time, temperature and ratio of enzyme to substrate ratio to develop hydrolysis process that optimizes the production of amino acids in DCS were studied. Four key hydrolysis pathways were investigated for the production of amino acids using DCS. The first hydrolysis pathway is the amino acid analysis using DAP. The second pathway is DAP of DCS followed by protein hydrolysis using proteases [Trypsin, Pronase E (Streptomyces griseus) and Protex 6L]. The third hydrolysis pathway investigated a standalone experiment using proteases (Trypsin, Pronase E, Protex 6L, and Alcalase) on the DCS without any pretreatment. The final pathway investigated the use of Accellerase 1500® and Protex 6L to simultaneously produce fermentable sugars and amino acids over a 24 hour hydrolysis reaction time. The 3 key objectives of the techno-economic analysis component of this PhD research included; (i) Development of a process design for the production of both the sugar and amino acid platforms with DAP using DCS (ii) A preliminary cost analysis to estimate the initial capital cost and operating cost of this facility (iii) A greenhouse gas analysis to understand the environmental impact of this facility. Using Aspen Plus®, a conceptual process design has been constructed. Finally, both Aspen Plus Economic Analyzer® and Simapro® sofware were employed to conduct the cost analysis as well as the carbon footprint emissions of this process facility respectively. Another section of my PhD research work focused on the life cycle assessment (LCA) of commonly used dairy feeds in the U.S. Greenhouse gas (GHG) emissions analysis was conducted for cultivation, harvesting, and production of common dairy feeds used for the production of dairy milk in the U.S. The goal was to determine the carbon footprint [grams CO2 equivalents (gCO2e)/kg of dry feed] in the U.S. on a regional basis, identify key inputs, and make recommendations for emissions reduction. The final section of my Ph.D. research work was an LCA of a single dairy feed mill located in Michigan, USA. The primary goal was to conduct a preliminary assessment of dairy feed mill operations and ultimately determine the GHG emissions for 1 kilogram of milled dairy feed.

Radiation metabolomics. 1. Identification of minimally invasive urine biomarkers for gamma-radiation exposure in mice

Gamma-radiation exposure has both short- and long-term adverse health effects. The threat of modern terrorism places human populations at risk for radiological exposures, yet current medical countermeasures to radiation exposure are limited. Here we describe metabolomics for gamma-radiation biodosimetry in a mouse model. Mice were gamma-irradiated at doses of 0, 3 and 8 Gy (2.57 Gy/min), and urine samples collected over the first 24 h after exposure were analyzed by ultra-performance liquid chromatography-time-of-flight mass spectrometry (UPLC-TOFMS). Multivariate data were analyzed by orthogonal partial least squares (OPLS). Both 3- and 8-Gy exposures yielded distinct urine metabolomic phenotypes. The top 22 ions for 3 and 8 Gy were analyzed further, including tandem mass spectrometric comparison with authentic standards, revealing that N-hexanoylglycine and beta-thymidine are urinary biomarkers of exposure to 3 and 8 Gy, 3-hydroxy-2-methylbenzoic acid 3-O-sulfate is elevated in urine of mice exposed to 3 but not 8 Gy, and taurine is elevated after 8 but not 3 Gy. Gene Expression Dynamics Inspector (GEDI) self-organizing maps showed clear dose-response relationships for subsets of the urine metabolome. This approach is useful for identifying mice exposed to gamma radiation and for developing metabolomic strategies for noninvasive radiation biodosimetry in humans.

Incidence and causative agents of chemical eye injuries in Switzerland

CONTEXT Chemical eye injuries are ophthalmological emergencies with a high risk of secondary complications and severe visual loss. Only limited epidemiological data for such injuries are available for many countries. PATIENTS AND METHODS We performed two independent studies. The cause of chemical eye injuries was assessed with a prospective questionnaire study. Questionnaires were sent to all ophthalmologists in Switzerland. A total of 163 patients (205 eyes) were included, between December 2012 and October 2014. Independent of the questionnaire study, the incidence of chemical eye injuries was assessed with a retrospective cohort study design using the database of the mandatory accident insurance. RESULTS Ophthalmological questionnaires revealed that plaster/cement (20.5%), alkaline (12.2%) and acid (10.2%) solutions caused the highest number of chemical injuries. Only 2% of all injuries were classified as grade III and none as grade IV (Roper-Hall classification). The official toxicological information phone-hotline was contacted in 4.3% of cases. Using data from the accident insurance, an incidence of chemical eye injuries of about 50/100 000/year was found in the working population. CONCLUSION Here, we present data on the involved agents of chemical eye injuries in Switzerland, and also the incidence of such injuries in the working population. This may also help to assess the need for further education programs and to improve and direct preventive measures.

Regulation of the heat shock response by thiol-reactive compounds in the yeast Saccharomyces cerevisiae

Cells govern their activities and modulate their interactions with the environment to achieve homeostasis. The heat shock response (HSR) is one of the most well studied fundamental cellular responses to environmental and physiological challenges, resulting in rapid synthesis of heat shock proteins (HSPs), which serve to protect cellular constituents from the deleterious effects of stress. In addition to its role in cytoprotection, the HSR also influences lifespan and is associated with a variety of human diseases including cancer, aging and neurodegenerative disorders. In most eukaryotes, the HSR is primarily mediated by the highly conserved transcription factor HSF1, which recognizes target hsp genes by binding to heat shock elements (HSEs) in their promoters. In recent years, significant efforts have been made to identify small molecules as potential pharmacological activators of HSF1 that could be used for therapeutic benefit in the treatment of human diseases relevant to protein conformation. However, the detailed mechanisms through which these molecules drive HSR activation remain unclear. In this work, I utilized the baker's yeast Saccharomyces cerevisiae as a model system to identify a group of thiol-reactive molecules including oxidants, transition metals and metalloids, and electrophiles, as potent activators of yeast Hsf1. Using an artificial HSE-lacZ reporter and the glucocorticoid receptor system (GR), these diverse thiol-reactive compounds are shown to activate Hsf1 and inhibit Hsp90 chaperone complex activity in a reciprocal, dose-dependent manner. To further understand whether cells sense these reactive compounds through accumulation of unfolded proteins, the proline analog azetidine-2-carboxylic acid (AZC) and protein cross-linker dithiobis(succinimidyl propionate) (DSP) were used to force misfolding of nascent polypeptides and existing cytosolic proteins, respectively. Both unfolding reagents display kinetic HSP induction profiles dissimilar to those generated by thiol-reactive compounds. Moreover, AZC treatment leads to significant cytotoxicity, which is not observed in the presence of the thiol-reactive compounds at the concentrations sufficient to induce Hsf1. Additionally, DSP treatment has little to no effect on Hsp90 functions. Together with the ultracentrifugation analysis of cell lysates that detected no insoluble protein aggregates, my data suggest that at concentrations sufficient to induce Hsf1, thiol-reactive compounds do not induce the HSR via a mechanism based on accumulation of unfolded cytosolic proteins. Another possibility is that thiol-reactive compounds may influence aspects of the protein quality control system such as the ubiquitin-proteasome system (UPS). To address this hypothesis, β-galactosidase reporter fusions were used as model substrates to demonstrate that thiol-reactive compounds do not inhibit ubiquitin activating enzymes (E1) or proteasome activity. Therefore, thiol-reactive compounds do not activate the HSR by inhibiting UPS-dependent protein degradation. I therefore hypothesized that these molecules may directly inactivate protein chaperones, known as repressors of Hsf1. To address this possibility, a thiol-reactive biotin probe was used to demonstrate in vitro that the yeast cytosolic Hsp70 Ssa1, which partners with Hsp90 to repress Hsf1, is specifically modified. Strikingly, mutation of conserved cysteine residues in Ssa1 renders cells insensitive to Hsf1 activation by cadmium and celastrol but not by heat shock. Conversely, substitution with the sulfinic acid and steric bulk mimic aspartic acid led to constitutive activation of Hsf1. Cysteine 303, located in the nucleotide-binding/ATPase domain of Ssa1, was shown to be modified in vivo by a model organic electrophile using Click chemistry technology, verifying that Ssa1 is a direct target for thiol-reactive compounds through adduct formation. Consistently, cadmium pretreatment promoted cells thermotolerance, which is abolished in cells carrying SSA1 cysteine mutant alleles. Taken together, these findings demonstrate that Hsp70 acts as a sensor to induce the cytoprotective heat shock response in response to environmental or endogenously produced thiol-reactive molecules and can discriminate between two distinct environmental stressors.

Methanogenic activity in sediments from DSDP Leg 64 Holes

We detected methanogenic bacterial activity in 6 of 12 sediment samples from Deep Sea Drilling Project (DSDP) locations in the Gulf of California.When samples were incubated anaerobically for three weeks at temperatures of 10 or 22°C, we found activity to sediment depths of about 12 meters. The methanogenic bacteria were inhibited by CHCl3 or 2-bromoethanesulfonic acid and were generally stimulated by H2.

(Table 1) Experimental data for kerogens from DSDP Hole 41-368

Potassium permanganate oxidative degradations were conducted for kerogens isolated from Cretaceous black shales (DSDP Leg 41, Site 368), thermally altered during the Miocene by diabase intrusions and from unaltered samples heated under laboratory conditions (250-500°C). Degradation products of less altered kerogens are dominated by normal C4-C15 alpha,omega-dicarboxylic acids, with lesser amounts of n-C16 and n-C18 monocarboxylic acids, and benzene mono-to-tetracarboxylic acids. On the other hand, thermally altered kerogens show benzene di-to-tetracarboxylic acids as dominant degradation products, with lesser or no amounts (variable depending on the degree of thermal alteration) of alpha,omega-dicarboxylic acids. Essentially no differences between the oxidative degradation products of naturally- and artificially-altered kerogens are observed. As a result of this study, five indices of aromatization (total aromatic acids/kerogen; apparent aromaticity; benzenetetracarboxylic acids/total aromatic acids; benzene-1,2-dicarboxylic acid/benzenedicarboxylic acids; benzene-1,2,3-tricarboxylic acid/benzenetricarboxylic acids) and two indices of aliphatic character (Total aliphatic acids/kerogen; Aliphaticity) are proposed to characterize the degree of thermal alteration of kerogens. Furthermore, a good correlation is observed between apparent aromaticity estimated by the present KMnO4 oxidation method and that from the 13C NMR method (Dennis et al., 1982; doi:10.1016/0016-7037(82)90046-1).