Dynamic Linear Precoding for the Exploitation of Known Interference in MIMO Broadcast Systems

This paper introduces a novel channel inversion (CI) precoding scheme for the downlink of phase shift keying (PSK)-based multiple input multiple output (MIMO) systems. In contrast to common practice where knowledge of the interference is used to eliminate it, the main idea proposed here is to use this knowledge to glean benefit from the interference. It will be shown that the system performance can be enhanced by exploiting some of the existent inter-channel interference (ICI). This is achieved by applying partial channel inversion such that the constructive part of ICI is preserved and exploited while the destructive part is eliminated by means of CI precoding. By doing so, the effective signal to interference-plus-noise ratio (SINR) delivered to the mobile unit (MU) receivers is enhanced without the need to invest additional transmitted signal power at the MIMO base station (BS). It is shown that the trade-off to this benefit is a minor increase in the complexity of the BS processing. The presented theoretical analysis and simulations demonstrate that due to the SINR enhancement, significant performance and throughput gains are offered by the proposed MIMO precoding technique compared to its conventional counterparts.

Politeness and social signals

In the literature, politeness has been researched within many disciplines. Although Brown and Levinson’s theory of politeness (1978, 1987) is often cited, it is primarily a linguistic theory and has been criticized for its lack of generalizability to all cultures. Consequently, there is a need for a more comprehensive approach to understand and explain politeness. We suggest applying a social signal framework that considers politeness as a communicative state. By doing so, we aim to unify and explain politeness and its corresponding research and identify further research needed in this area.

‘Supra-stewardship’: A Tool for Citizen Participation in European Union Pandemic Preparedness Planning

This article proposes developing the public bioethics aspect of stewardship and applying it to the EU as ‘supra-stewardship’, a tool for opening a discursive space for citizen participation in EU preparedness planning. With this in mind the article highlights some of the contours for engagement on the boundaries of responsibility and the production of governance distortions and failures brought out by attention to framing, distribution, vulnerability and learning. This should help citizens to tackle the complementary expert and public rationalities that undermine their involvement, contribute supplementary knowledge towards governance, and help promote institutional learning by the EU and resilience.

Finding exoplanets orbiting young active stars - I. Technique

Stellar activity, such as starspots, can induce radial velocity (RV) variations that can mask or even mimic the RV signature of orbiting exoplanets. For this reason RV exoplanet surveys have been unsuccessful when searching for planets around young, active stars and are therefore failing to explore an important regime which can help to reveal how planets form and migrate. This paper describes a new technique to remove spot signatures from the stellar line-profiles of moderately rotating, active stars (v sin i ranging from 10 to 50 km s(-1)). By doing so it allows planetary RV signals to be uncovered. We used simulated models of a G5V type star with differing dark spots on its surface along with archive data of the known active star HD 49933 to validate our method. The results showed that starspots could be effectively cleaned from the line-profiles so that the stellar RV jitter was reduced by more than 80 per cent. Applying this procedure to the same models and HD 49933 data, but with fake planets injected, enabled the effective removal of starspots so that Jupiter mass planets on short orbital periods were successfully recovered. These results show that this approach can be useful in the search for hot-Jupiter planets that orbit around young, active stars with a v sin i of similar to 10-50 km/s.

Statistics sunspots and settlement: Influences on sum of probability curves

Large data sets of radiocarbon dates are becoming a more common feature of archaeological research. The sheer numbers of radiocarbon dates produced, however, raise issues of representation and interpretation. This paper presents a methodology which both reduces the visible impact of dating fluctuations, but also takes into consideration the influence of the underlying radiocarbon calibration curve. By doing so, it may be possible to distinguish between periods of human activity in early medieval Ireland and the statistical tails produced by radiocarbon calibration.

The Scottish Reformations and the Origin of Religious and Civil Liberty in Britain and Ireland: Presbyterian Interpretations, c.1800-60

This article examines Presbyterian interpretations in Scotland and Ireland of the Scottish Reformations of 1560 and 1638–43. It begins with a discussion of the work of two important Presbyterian historians of the early nineteenth century, the Scotsman, Thomas McCrie, and the Irishman, James Seaton Reid. In their various publications, both laid the template for the nineteenth-century Presbyterian understanding of the Scottish Reformations by emphasizing the historical links between the Scottish and Irish churches in the early-modern period and their common theology and commitment to civil and religious liberty against the ecclesiastical and political tyranny of the Stuarts. The article also examines the commemorations of the National Covenant in 1838, the Solemn League and Covenant in 1843, and the Scottish Reformation in 1860. By doing so, it uncovers important religious and ideological linkages across the North Channel, including Presbyterian evangelicalism, missionary activity, church–state relationships, religious reform and revival, and anti-Catholicism

Insight Extraction for Semiconductor Manufacturing Processes

In the semiconductor manufacturing environment it is very important to understand which factors have the most impact on process outcomes and to control them accordingly. This is usually achieved through design of experiments at process start-up and long term observation of production. As such it relies heavily on the expertise of the process engineer. In this work, we present an automatic approach to extracting useful insights about production processes and equipment based on state-of-the-art Machine Learning techniques. The main goal of this activity is to provide tools to process engineers to accelerate the learning-by-observation phase of process analysis. Using a Metal Deposition process as an example, we highlight various ways in which the extracted information can be employed.

Negotiating spatiality: Potential of border areas for intergroup mixing in divided cities

This paper will discuss the issues of spatial segregation in the divided city context,focusing on Belfast as a case study it will discuss, issues that limit the inclusivity of shared space in the city, the challenge of insular spatial patterns created by division, and the micro politics of everyday contact. It will argue the significance of creating everyday space to enable practical socio-spatial interaction between divided groups and propose that areas on community borders can be developed as active spaces accommodating services that the communities need, use, and want on an everyday basis, by doing so it offers a potential form valuable contact. It will report on an ongoing study which examines such sites located on community border and assesses their capacity to act as beneficial ‘spaces of engagement’ for communities set within divided context.

Northern Ireland and ‘The Troubles’, outlining an innovative approach to nursing/midwifery student teaching and module evaluation

This discussion paper outlines an approach to developing and evaluating an educative programme primarily delivered by lay `citizen trainers’ in educating student nurses, and student midwives to the impact of and experience of extended and extensive civil unrest within their communities (`the Troubles’ ). This is drawn from experience within the Northern Ireland `Troubles’ and all of the citizen trainers were directly affected physically/psychologically. The programme was intended to both educate but primarily to help facilitate student nurses and student midwives to better understanding to experience and context and to more effective care delivery to those affected by/damaged by `the Troubles’. Evaluation of the teaching and learning by the students was significantly positive.

Maintaining a grasp on reality – Is our validation and design effort focused in the same direction?

This article examines the influence on the engineering design process of the primary objective of validation, whether it is proving a model, a technology or a product. Through the examination of a number of stiffened panel case studies, the relationships between simulation, validation, design and the final product are established and discussed. The work demonstrates the complex interactions between the original (or anticipated) design model, the analysis model, the validation activities and the product in service. The outcome shows clearly some unintended consequences. High fidelity validation test simulations require a different set of detailed parameters to accurately capture behaviour. By doing so, there is a divergence from the original computer-aided design model, intrinsically limiting the value of the validation with respect to the product. This work represents a shift from the traditional perspective of encapsulating and controlling errors between simulation and experimental test to consideration of the wider design-test process. Specifically, it is a reflection on the implications of how models are built and validated, and the effect on results and understanding of structural behaviour. This article then identifies key checkpoints in the design process and how these should be used to update the computer-aided design system parameters for a design. This work strikes at a fundamental challenge in understanding the interaction between design, certification and operation of any complex system.

Innovative interprofessional teaching session on labour and childbirth for undergraduate medical and midwifery students

There is an increasing recognition of the need to improve interprofessional relationships within clinical practice (Midwifery 2020, 2010). Evidence supports the assertion that healthcare professionals who are able to communicate and work effectively together and who have a mutual respect and understanding for one another’s roles will provide a higher standard of care (McPherson et al, 2001; Miers et al, 2005; Begley, 2008). The joint Royal College of Obstetrics & Gynaecologists(RCOG) / Royal College of Midwives (RCM) report (2008 Page 8) on clinical learning environment and recruitment recommended that “Inter-professional learning strategies should be introduced and supported at an early stage in the medical and midwifery undergraduate students' experience and continued throughout training.” Providing interprofessional education within a University setting offers an opportunity for a non-threatening learning environment where students can develop confidence and build collaborative working relationships with one another (Saxell et al, 2009).Further research supports the influence of effective team working on increased client satisfaction. Additionally it identifies that the integration of interprofessional learning into a curriculum improves students’ abilities to interact professionally and provides a better understanding of role identification within the workplace than students who have only been exposed to uniprofessional education (Meterko et al, 2004; Pollard and Miers, 2008; Siassakos, et al, 2009; Wilhelmsson et al, 2011; Murray-Davis et al, 2012). An interprofessional education indicative has been developed by teaching staff from the School of Nursing and Midwifery and School of Medicine at Queen’s University Belfast. The aim of the collaboration was to enhance interprofessional learning by providing an opportunity for medical students and midwifery students to interact and communicate prior to medical students undertaking their obstetrics and gynaecology placements. This has improved medical students placement experience by facilitating them to learn about the process of birth and familiarisation of the delivery suite environment and it also has the potential to enhance interprofessional relationships. Midwifery students benefit through the provision of an opportunity to teach and facilitate learning in relation to normal labour and birth and has provided them with an opportunity to build stronger and more positive relationships with another profession. This opportunity also provides a positive, confidence building forum where midwifery students utilise teaching and learning strategies which would be transferable to their professional role as registered midwives. The midwifery students were provided with an outline agenda in relation to content for the workshop, but then were allowed creative licence with regard to delivery of the workshop. The interactive workshops are undertaken within the University’s clinical education centre, utilising low fidelity simulation. The sessions are delivered 6 times per year and precede the medical students’ obstetric/gynaecology placement. All 4th year medical and final year midwifery students have an opportunity to participate. Preliminary evaluations of the workshops have been positive from both midwifery and medical students. The teaching sessions provided both midwifery and medical students with an introduction to inter professional learning and gave them an opportunity to learn about and respect each other’s roles. The midwifery students have commented on the enjoyable aspects of team working for preparing for the workshop and also the confidence gained from teaching medical students. The medical students have evaluated the teaching by midwifery students positively and felt that it lowered their anxiety levels going into the labour setting. A number of midwifery and medical students have subsequently worked with one another within the practice setting which has been recognised as beneficial. Both Schools have recognised the benefits of interprofessional education and have subsequently made a commitment to embed it within each curriculum.

Using low fidelity simulation in interactive workshops for undergraduate medical and midwifery students

There is recognition of the need to continuously improve inter-professional relationships within clinical practice. Mutual respect, effective communication and working together are factors which will contribute to higher standards of care (Miers et al, 2005; Begley, 2008). An inter-professional education initiative, using low-fidelity simulation has been piloted and subsequently embedded within a pre-registration midwifery curriculum. The aim of the collaboration is to enhance inter-professional learning by providing an opportunity for final year midwifery students and 4th year medical students within a non-threatening environment to interact and communicate prior to obstetric clinical placements. The midwifery students are provided with an outline agenda for the workshop, but are encouraged to use creative license with regard to workshop delivery. Preliminary evaluations have been positive from both midwifery and medical students. The teaching sessions have provided an opportunity to learn about and respect each other’s roles. The midwifery students have commented on the enjoyable aspects of team working during preparation and the confidence gained from teaching medical students. The medical students felt that the sessions lowered their anxiety levels going into the labour setting. This workshop will demonstrate how low-fidelity simulation can effectively enhance the students experience promoting team working and self-confidence.

iLectures - Exploring the interactive lecture using web-based broadcasting technology

The continued use of traditional lecturing across Higher Education as the main teaching and learning approach in many disciplines must be challenged. An increasing number of studies suggest that this approach, compared to more active learning methods, is the least effective. In counterargument, the use of traditional lectures are often justified as necessary given a large student population. By analysing the implementation of a web based broadcasting approach which replaced the traditional lecture within a programming-based module, and thereby removed the student population rationale, it was hoped that the student learning experience would become more active and ultimately enhance learning on the module. The implemented model replaces the traditional approach of students attending an on-campus lecture theatre with a web-based live broadcast approach that focuses on students being active learners rather than passive recipients. Students ‘attend’ by viewing a live broadcast of the lecturer, presented as a talking head, and the lecturer’s desktop, via a web browser. Video and audio communication is primarily from tutor to students, with text-based comments used to provide communication from students to tutor. This approach promotes active learning by allowing student to perform activities on their own computer rather than the passive viewing and listening common encountered in large lecture classes. By analysing this approach over two years (n = 234 students) results indicate that 89.6% of students rated the approach as offering a highly positive learning experience. Comparing student performance across three academic years also indicates a positive change. A small data analytic analysis was conducted into student participation levels and suggests that the student cohort's willingness to engage with the broadcast lectures material is high.

Evaluation of thermochemical biomass conversion in fluidized bed

Dado o aumento acelerado dos preços dos combustíveis fósseis e as incertezas quanto à sua disponibilidade futura, tem surgido um novo interesse nas tecnologias da biomassa aplicadas à produção de calor, eletricidade ou combustíveis sintéticos. Não obstante, para a conversão termoquímica de uma partícula de biomassa sólida concorrem fenómenos bastante complexos que levam, em primeiro lugar, à secagem do combustível, depois à pirólise e finalmente à combustão ou gasificação propriamente ditas. Uma descrição relativamente incompleta de alguns desses estágios de conversão constitui ainda um obstáculo ao desenvolvimento das tecnologias que importa ultrapassar. Em particular, a presença de elevados conteúdos de matéria volátil na biomassa põe em evidência o interesse prático do estudo da pirólise. A importância da pirólise durante a combustão de biomassa foi evidenciada neste trabalho através de ensaios realizados num reator piloto de leito fluidizado borbulhante. Verificou-se que o processo ocorre em grande parte à superfície do leito com chamas de difusão devido à libertação de voláteis, o que dificulta o controlo da temperatura do reator acima do leito. No caso da gasificação de biomassa a pirólise pode inclusivamente determinar a eficiência química do processo. Isso foi mostrado neste trabalho durante ensaios de gasificação num reator de leito fluidizado de 2MWth, onde um novo método de medição permitiu fechar o balanço de massa ao gasificador e monitorizar o grau de conversão da biomassa. A partir destes resultados tornou-se clara a necessidade de descrever adequadamente a pirólise de biomassa com vista ao projeto e controlo dos processos. Em aplicações de engenharia há particular interesse na estequiometria e propriedades dos principais produtos pirolíticos. Neste trabalho procurou-se responder a esta necessidade, inicialmente através da estruturação de dados bibliográficos sobre rendimentos de carbonizado, líquidos pirolíticos e gases, assim como composições elementares e poderes caloríficos. O resultado traduziu-se num conjunto de parâmetros empíricos de interesse prático que permitiram elucidar o comportamento geral da pirólise de biomassa numa gama ampla de condições operatórias. Para além disso, propôs-se um modelo empírico para a composição dos voláteis que pode ser integrado em modelos compreensivos de reatores desde que os parâmetros usados sejam adequados ao combustível ensaiado. Esta abordagem despoletou um conjunto de ensaios de pirólise com várias biomassas, lenhina e celulose, e temperaturas entre os 600 e 975ºC. Elevadas taxas de aquecimento do combustível foram alcançadas em reatores laboratoriais de leito fluidizado borbulhante e leito fixo, ao passo que um sistema termo-gravimétrico permitiu estudar o efeito de taxas de aquecimento mais baixas. Os resultados mostram que, em condições típicas de processos de combustão e gasificação, a quantidade de voláteis libertada da biomassa é pouco influenciada pela temperatura do reator mas varia bastante entre combustíveis. Uma análise mais aprofundada deste assunto permitiu mostrar que o rendimento de carbonizado está intimamente relacionado com o rácio O/C do combustível original, sendo proposto um modelo simples para descrever esta relação. Embora a quantidade total de voláteis libertada seja estabelecida pela composição da biomassa, a respetiva composição química depende bastante da temperatura do reator. Rendimentos de espécies condensáveis (água e espécies orgânicas), CO2 e hidrocarbonetos leves descrevem um máximo relativamente à temperatura para dar lugar a CO e H2 às temperaturas mais altas. Não obstante, em certas gamas de temperatura, os rendimentos de algumas das principais espécies gasosas (e.g. CO, H2, CH4) estão bem correlacionados entre si, o que permitiu desenvolver modelos empíricos que minimizam o efeito das condições operatórias e, ao mesmo tempo, realçam o efeito do combustível na composição do gás. Em suma, os ensaios de pirólise realizados neste trabalho permitiram constatar que a estequiometria da pirólise de biomassa se relaciona de várias formas com a composição elementar do combustível original o que levanta várias possibilidades para a avaliação e projeto de processos de combustão e gasificação de biomassa.

Gestão da sustentabilidade nas organizações: uma nova metodologia

O presente trabalho pretende auxiliar o processo de consolidação do conceito de sustentabilidade no seio das organizações. Partindo de ferramentas de gestão e avaliação já existentes, esta tese sugere a sua integração numa única metodologia, ultrapassando desse modo as limitações e potenciando as suas capacidades enquanto ferramentas isoladas. O modelo proposto para o Sistema de Gestão da Sustentabilidade (SGS) integra assim: o conceito de melhoria contínua característico dos sistemas de gestão normalizados; a capacidade de tradução da perspetiva estratégica da gestão para o plano operacional, característica do Business Scorecard (BSC); e, por fim, a avaliação emergética é ainda utilizada como uma ferramenta de avaliação da sustentabilidade de sistemas. Um objetivo secundário desta tese prende-se com o desenvolvimento de um procedimento para a realização da análise emergética de um sistema. Depois de analisada a literatura referente à utilização da análise emergética, identificou-se como necessária a definição de um procedimento normalizado, adotando um conjunto de tarefas e um formato de apresentação de resultados que permita disseminar o conceito e tornar a ferramenta mais “utilizável”. Por outro lado, procurou-se dotar o procedimento com um conjunto de indicações que permitem ultrapassar limitações e inconvenientes apontados pelos críticos mas também utilizadores do método, nomeadamente: problemas de dupla contagem, cálculo da incerteza da análise e critérios de qualidade da informação utilizada. O modelo dos sistemas de gestão normalizados apresenta um papel central na metodologia proposta. O conceito de “melhoria contínua” afigura-se como fundamental num sistema que pretende implementar o conceito “desenvolvimento sustentável” e avaliar o seu desempenho à luz do mesmo. Assim, o ciclo Plan-Do-check-Act (PDCA) deve ser utilizado para implementar o SGS de acordo com uma Política para a Sustentabilidade que a organização deve desenvolver. Definida a Política, o modelo baseia-se então no ciclo PDCA: fase de planeamento; fase de implementação; fase de verificação; e fase de revisão. É na fase de planeamento do SGS que se sugere a introdução das outras duas ferramentas: a análise emergética (AEm) e o BSC. A fase de planeamento do modelo de SGS proposto neste trabalho foi aplicada à Universidade de Aveiro (UA), incluindo a definição de uma Política para a Sustentabilidade e o planeamento estratégico e operacional. A avaliação emergética à UA foi realizada recorrendo ao procedimento desenvolvido nesta tese e permitiu caracterizar e avaliar os fluxos de recursos que a “alimentam” sob uma só unidade, atribuindo deste modo graus de importância aos diferentes recursos utilizados. A informação representa 96% do total de recursos utilizados na UA, quando avaliados sob o ponto de vista emergética. Para além da informação, os fluxos financeiros representam a maior fatia do orçamento emergético da UA, grande parte dos quais serve para sustentar os serviços prestados pelo corpo docente da UA. Analisando valores históricos de 3 indicadores de desempenho emergético, observa-se que a UA não regista uma evolução positiva em nenhum dos indicadores: a emergia utilizada nos edifícios tem-se mantido mais ou menos constante; a retribuição emergética da UA para a sociedade, avaliada sobre a forma de diplomados, tem diminuído; e a relação emergética entre professores e alunos tem também diminuído, facto que pode refletir-se na qualidade dos “produtos” da UA. Da aplicação do SGS à UA regista-se: a adequabilidade do ciclo PDCA à implementação de um SGS; a capacidade da AEm “obrigar” a organização a adotar uma abordagem sistémica da sua atividade, resultando numa visão mais aprofundada da sua relação com o contexto ambiental, económico e social em que se insere; a importância da visão estratégica e da sua tradução em termos operacionais na fase de planeamento de um SGS; e, por fim, a capacidade de adaptação e dupla funcionalidade (implementação e avaliação) do modelo de SGS proposto. A metodologia de SGS proposta nesta tese, sendo direcionada para todo o tipo de organizações, não se desvirtua quando aplicada ao contexto específico das instituições de ensino superior e permite implementar e avaliar o conceito “desenvolvimento sustentável” nas quatro dimensões da universidade (Educação, Investigação, Operação; Relação com as partes interessadas).