Empleo de materiales reciclados para centros educativos en Chile

Los objetivos de este proyecto son dobles. El primero a conseguir es el acondicionamiento acústico de un centro educativo para alcanzar un mayor rendimiento docente; lo que se pretende lograr mejorando la inteligibilidad de la palabra y reduciendo el ruido en los diferentes recintos. El segundo objetivo, es la reducción de los costos económicos y medioambientales del proyecto empleando en el acondicionamiento acústico materiales procedentes del reciclado o existentes en el entorno local, reduciendo lo mayor posible la importación de estos materiales. Desde la investigación de las exigencias acústicas de un centro educativo, se determinarán los parámetros adecuados para su diseño óptimo. En general los mayores problemas acústicos existentes en estos establecimientos, son debidos a la transferencia de ruido entre los diferentes recintos y su excesiva reverberación, lo que provoca dificultades en la transmisión de la palabra y por ende también en las actividades docentes y los objetivos educativos. Asimismo, los parámetros y exigencias acústicas planteadas y desarrolladas, serán estudiados a partir de un contexto real y específico. El lugar elegido para el caso de estudio, será la ciudad de Santiago de Chile. Es importante, aclarar que en este país no existe una normativa aplicable a este tipo de establecimientos, por tanto se planteará el aislamiento acústico y posterior acondicionamiento a partir de normas y requisitos internacionales. Además, las soluciones acústicas planteadas serán de materiales reciclados existentes en el mercado nacional. Esta decisión tiene como finalidad reducir la afección al medio ambiente fomentando el desarrollo ecológico y sostenible como respuesta al crecimiento económico y la conservación de recursos en un país que se encuentra en vías de desarrollo. Por último, se plantea el acondicionamiento acústico de los diferentes recintos del colegio en proyecto, mediante simulación acústica en el programa EASE (Enhanced Acoustic Simulator for Engineers), lo que nos permite conocer el comportamiento de los recintos antes y después del acondicionamiento acústico. SUMMARY The objective of this Project is twofold. On the one hand, the acoustic conditioning of a school is developed in order to achieve a better teaching performance. For this purpose, the speech intelligibility is enhanced and the noise in the different rooms is reduced. On the other hand, the economic costs and environmental impact are reduced by using recycled materials or materials found in the local area, reducing as much as possible the use of imported materials. The appropriate acoustic parameters will be determined from the evaluation of the acoustic demands of the school. The main problems in these environments are the noise transmission between rooms as well as a high reverberation time. These will cause problems with the speech transmission, which is of great importance for educational purposes. Furthermore, the acoustic parameters and requirements are taken from a real and specific context. The place chosen for the research is Santiago, Chile. It is remarkable that in this country there is no national legislation that can be applied to such places, therefore International Standards are considered to evaluate the acoustic insulation and conditioning. The acoustic solutions considered in this project come from recycled materials existing on the domestic market. The decision aims to reduce the environmental impact, promoting environmentally sustainable development as a response to the economic growth and the maintenance of resources in a developing country. Finally, a simulation at some different areas of the school is carried out, comparing the behaviour before and after the proposed acoustic solutions. The software used for the simulations is EASE (Enhanced Acoustic Simulator for Engineers).

Design and Validation of an Optimized MB-OFDM Ultra Wideband Transceiver System

Esta tesis está incluida dentro del campo del campo de Multiband Orthogonal Frequency Division Multiplexing Ultra Wideband (MB-OFDM UWB), el cual ha adquirido una gran importancia en las comunicaciones inalámbricas de alta tasa de datos en la última década. UWB surgió con el objetivo de satisfacer la creciente demanda de conexiones inalámbricas en interiores y de uso doméstico, con bajo coste y alta velocidad. La disponibilidad de un ancho de banda grande, el potencial para alta velocidad de transmisión, baja complejidad y bajo consumo de energía, unido al bajo coste de implementación, representa una oportunidad única para que UWB se convierta en una solución ampliamente utilizada en aplicaciones de Wireless Personal Area Network (WPAN). UWB está definido como cualquier transmisión que ocupa un ancho de banda de más de 20% de su frecuencia central, o más de 500 MHz. En 2002, la Comisión Federal de Comunicaciones (FCC) definió que el rango de frecuencias de transmisión de UWB legal es de 3.1 a 10.6 GHz, con una energía de transmisión de -41.3 dBm/Hz. Bajo las directrices de FCC, el uso de la tecnología UWB puede aportar una enorme capacidad en las comunicaciones de corto alcance. Considerando las ecuaciones de capacidad de Shannon, incrementar la capacidad del canal requiere un incremento lineal en el ancho de banda, mientras que un aumento similar de la capacidad de canal requiere un aumento exponencial en la energía de transmisión. En los últimos años, s diferentes desarrollos del UWB han sido extensamente estudiados en diferentes áreas, entre los cuales, el protocolo de comunicaciones inalámbricas MB-OFDM UWB está considerado como la mejor elección y ha sido adoptado como estándar ISO/IEC para los WPANs. Combinando la modulación OFDM y la transmisión de datos utilizando las técnicas de salto de frecuencia, el sistema MB-OFDM UWB es capaz de soportar tasas de datos con que pueden variar de los 55 a los 480 Mbps, alcanzando una distancia máxima de hasta 10 metros. Se esperara que la tecnología MB-OFDM tenga un consumo energético muy bajo copando un are muy reducida en silicio, proporcionando soluciones de bajo coste que satisfagan las demandas del mercado. Para cumplir con todas estas expectativas, el desarrollo y la investigación del MBOFDM UWB deben enfrentarse a varios retos, como son la sincronización de alta sensibilidad, las restricciones de baja complejidad, las estrictas limitaciones energéticas, la escalabilidad y la flexibilidad. Tales retos requieren un procesamiento digital de la señal de última generación, capaz de desarrollar sistemas que puedan aprovechar por completo las ventajas del espectro UWB y proporcionar futuras aplicaciones inalámbricas en interiores. Esta tesis se centra en la completa optimización de un sistema de transceptor de banda base MB-OFDM UWB digital, cuyo objetivo es investigar y diseñar un subsistema de comunicación inalámbrica para la aplicación de las Redes de Sensores Inalámbricas Visuales. La complejidad inherente de los procesadores FFT/IFFT y el sistema de sincronización así como la alta frecuencia de operación para todos los elementos de procesamiento, se convierten en el cuello de la botella para el diseño y la implementación del sistema de UWB digital en base de banda basado en MB-OFDM de baja energía. El objetivo del transceptor propuesto es conseguir baja energía y baja complejidad bajo la premisa de un alto rendimiento. Las optimizaciones están realizadas tanto a nivel algorítmico como a nivel arquitectural para todos los elementos del sistema. Una arquitectura hardware eficiente en consumo se propone en primer lugar para aquellos módulos correspondientes a núcleos de computación. Para el procesado de la Transformada Rápida de Fourier (FFT/IFFT), se propone un algoritmo mixed-radix, basado en una arquitectura con pipeline y se ha desarrollado un módulo de Decodificador de Viterbi (VD) equilibrado en coste-velocidad con el objetivo de reducir el consumo energético e incrementar la velocidad de procesamiento. También se ha implementado un correlador signo-bit simple basado en la sincronización del tiempo de símbolo es presentado. Este correlador es usado para detectar y sincronizar los paquetes de OFDM de forma robusta y precisa. Para el desarrollo de los subsitemas de procesamiento y realizar la integración del sistema completo se han empleado tecnologías de última generación. El dispositivo utilizado para el sistema propuesto es una FPGA Virtex 5 XC5VLX110T del fabricante Xilinx. La validación el propuesta para el sistema transceptor se ha implementado en dicha placa de FPGA. En este trabajo se presenta un algoritmo, y una arquitectura, diseñado con filosofía de co-diseño hardware/software para el desarrollo de sistemas de FPGA complejos. El objetivo principal de la estrategia propuesta es de encontrar una metodología eficiente para el diseño de un sistema de FPGA configurable optimizado con el empleo del mínimo esfuerzo posible en el sistema de procedimiento de verificación, por tanto acelerar el periodo de desarrollo del sistema. La metodología de co-diseño presentada tiene la ventaja de ser fácil de usar, contiene todos los pasos desde la propuesta del algoritmo hasta la verificación del hardware, y puede ser ampliamente extendida para casi todos los tipos de desarrollos de FPGAs. En este trabajo se ha desarrollado sólo el sistema de transceptor digital de banda base por lo que la comprobación de señales transmitidas a través del canal inalámbrico en los entornos reales de comunicación sigue requiriendo componentes RF y un front-end analógico. No obstante, utilizando la metodología de co-simulación hardware/software citada anteriormente, es posible comunicar el sistema de transmisor y el receptor digital utilizando los modelos de canales propuestos por IEEE 802.15.3a, implementados en MATLAB. Por tanto, simplemente ajustando las características de cada modelo de canal, por ejemplo, un incremento del retraso y de la frecuencia central, podemos estimar el comportamiento del sistema propuesto en diferentes escenarios y entornos. Las mayores contribuciones de esta tesis son: • Se ha propuesto un nuevo algoritmo 128-puntos base mixto FFT usando la arquitectura pipeline multi-ruta. Los complejos multiplicadores para cada etapa de procesamiento son diseñados usando la arquitectura modificada shiftadd. Los sistemas word length y twiddle word length son comparados y seleccionados basándose en la señal para cuantización del SQNR y el análisis de energías. • El desempeño del procesador IFFT es analizado bajo diferentes situaciones aritméticas de bloques de punto flotante (BFP) para el control de desbordamiento, por tanto, para encontrar la arquitectura perfecta del algoritmo IFFT basado en el procesador FFT propuesto. • Para el sistema de receptor MB-OFDM UWB se ha empleado una sincronización del tiempo innovadora, de baja complejidad y esquema de compensación, que consiste en funciones de Detector de Paquetes (PD) y Estimación del Offset del tiempo. Simplificando el cross-correlation y maximizar las funciones probables solo a sign-bit, la complejidad computacional se ve reducida significativamente. • Se ha propuesto un sistema de decodificadores Viterbi de 64 estados de decisión-débil usando velocidad base-4 de arquitectura suma-comparaselecciona. El algoritmo Two-pointer Even también es introducido en la unidad de rastreador de origen con el objetivo de conseguir la eficiencia en el hardware. • Se han integrado varias tecnologías de última generación en el completo sistema transceptor basebanda , con el objetivo de implementar un sistema de comunicación UWB altamente optimizado. • Un diseño de flujo mejorado es propuesto para el complejo sistema de implementación, el cual puede ser usado para diseños de Cadena de puertas de campo programable general (FPGA). El diseño mencionado no sólo reduce dramáticamente el tiempo para la verificación funcional, sino también provee un análisis automático como los errores del retraso del output para el sistema de hardware implementado. • Un ambiente de comunicación virtual es establecido para la validación del propuesto sistema de transceptores MB-OFDM. Este método es provisto para facilitar el uso y la conveniencia de analizar el sistema digital de basebanda sin parte frontera analógica bajo diferentes ambientes de comunicación. Esta tesis doctoral está organizada en seis capítulos. En el primer capítulo se encuentra una breve introducción al campo del UWB, tanto relacionado con el proyecto como la motivación del desarrollo del sistema de MB-OFDM. En el capítulo 2, se presenta la información general y los requisitos del protocolo de comunicación inalámbrica MBOFDM UWB. En el capítulo 3 se habla de la arquitectura del sistema de transceptor digital MB-OFDM de banda base . El diseño del algoritmo propuesto y la arquitectura para cada elemento del procesamiento está detallado en este capítulo. Los retos de diseño del sistema que involucra un compromiso de discusión entre la complejidad de diseño, el consumo de energía, el coste de hardware, el desempeño del sistema, y otros aspectos. En el capítulo 4, se ha descrito la co-diseñada metodología de hardware/software. Cada parte del flujo del diseño será detallado con algunos ejemplos que se ha hecho durante el desarrollo del sistema. Aprovechando esta estrategia de diseño, el procedimiento de comunicación virtual es llevado a cabo para probar y analizar la arquitectura del transceptor propuesto. Los resultados experimentales de la co-simulación y el informe sintético de la implementación del sistema FPGA son reflejados en el capítulo 5. Finalmente, en el capítulo 6 se incluye las conclusiones y los futuros proyectos, y también los resultados derivados de este proyecto de doctorado. ABSTRACT In recent years, the Wireless Visual Sensor Network (WVSN) has drawn great interest in wireless communication research area. They enable a wealth of new applications such as building security control, image sensing, and target localization. However, nowadays wireless communication protocols (ZigBee, Wi-Fi, and Bluetooth for example) cannot fully satisfy the demands of high data rate, low power consumption, short range, and high robustness requirements. New communication protocol is highly desired for such kind of applications. The Ultra Wideband (UWB) wireless communication protocol, which has increased in importance for high data rate wireless communication field, are emerging as an important topic for WVSN research. UWB has emerged as a technology that offers great promise to satisfy the growing demand for low-cost, high-speed digital wireless indoor and home networks. The large bandwidth available, the potential for high data rate transmission, and the potential for low complexity and low power consumption, along with low implementation cost, all present a unique opportunity for UWB to become a widely adopted radio solution for future Wireless Personal Area Network (WPAN) applications. UWB is defined as any transmission that occupies a bandwidth of more than 20% of its center frequency, or more than 500 MHz. In 2002, the Federal Communications Commission (FCC) has mandated that UWB radio transmission can legally operate in the range from 3.1 to 10.6 GHz at a transmitter power of －41.3 dBm/Hz. Under the FCC guidelines, the use of UWB technology can provide enormous capacity over short communication ranges. Considering Shannon’s capacity equations, increasing the channel capacity requires linear increasing in bandwidth, whereas similar channel capacity increases would require exponential increases in transmission power. In recent years, several different UWB developments has been widely studied in different area, among which, the MB-OFDM UWB wireless communication protocol is considered to be the leading choice and has recently been adopted in the ISO/IEC standard for WPANs. By combing the OFDM modulation and data transmission using frequency hopping techniques, the MB-OFDM UWB system is able to support various data rates, ranging from 55 to 480 Mbps, over distances up to 10 meters. The MB-OFDM technology is expected to consume very little power and silicon area, as well as provide low-cost solutions that can satisfy consumer market demands. To fulfill these expectations, MB-OFDM UWB research and development have to cope with several challenges, which consist of high-sensitivity synchronization, low- complexity constraints, strict power limitations, scalability, and flexibility. Such challenges require state-of-the-art digital signal processing expertise to develop systems that could fully take advantages of the UWB spectrum and support future indoor wireless applications. This thesis focuses on fully optimization for the MB-OFDM UWB digital baseband transceiver system, aiming at researching and designing a wireless communication subsystem for the Wireless Visual Sensor Networks (WVSNs) application. The inherent high complexity of the FFT/IFFT processor and synchronization system, and high operation frequency for all processing elements, becomes the bottleneck for low power MB-OFDM based UWB digital baseband system hardware design and implementation. The proposed transceiver system targets low power and low complexity under the premise of high performance. Optimizations are made at both algorithm and architecture level for each element of the transceiver system. The low-power hardwareefficient structures are firstly proposed for those core computation modules, i.e., the mixed-radix algorithm based pipelined architecture is proposed for the Fast Fourier Transform (FFT/IFFT) processor, and the cost-speed balanced Viterbi Decoder (VD) module is developed, in the aim of lowering the power consumption and increasing the processing speed. In addition, a low complexity sign-bit correlation based symbol timing synchronization scheme is presented so as to detect and synchronize the OFDM packets robustly and accurately. Moreover, several state-of-the-art technologies are used for developing other processing subsystems and an entire MB-OFDM digital baseband transceiver system is integrated. The target device for the proposed transceiver system is Xilinx Virtex 5 XC5VLX110T FPGA board. In order to validate the proposed transceiver system in the FPGA board, a unified algorithm-architecture-circuit hardware/software co-design environment for complex FPGA system development is presented in this work. The main objective of the proposed strategy is to find an efficient methodology for designing a configurable optimized FPGA system by using as few efforts as possible in system verification procedure, so as to speed up the system development period. The presented co-design methodology has the advantages of easy to use, covering all steps from algorithm proposal to hardware verification, and widely spread for almost all kinds of FPGA developments. Because only the digital baseband transceiver system is developed in this thesis, the validation of transmitting signals through wireless channel in real communication environments still requires the analog front-end and RF components. However, by using the aforementioned hardware/software co-simulation methodology, the transmitter and receiver digital baseband systems get the opportunity to communicate with each other through the channel models, which are proposed from the IEEE 802.15.3a research group, established in MATLAB. Thus, by simply adjust the characteristics of each channel model, e.g. mean excess delay and center frequency, we can estimate the transmission performance of the proposed transceiver system through different communication situations. The main contributions of this thesis are: • A novel mixed radix 128-point FFT algorithm by using multipath pipelined architecture is proposed. The complex multipliers for each processing stage are designed by using modified shift-add architectures. The system wordlength and twiddle word-length are compared and selected based on Signal to Quantization Noise Ratio (SQNR) and power analysis. • IFFT processor performance is analyzed under different Block Floating Point (BFP) arithmetic situations for overflow control, so as to find out the perfect architecture of IFFT algorithm based on the proposed FFT processor. • An innovative low complex timing synchronization and compensation scheme, which consists of Packet Detector (PD) and Timing Offset Estimation (TOE) functions, for MB-OFDM UWB receiver system is employed. By simplifying the cross-correlation and maximum likelihood functions to signbit only, the computational complexity is significantly reduced. • A 64 state soft-decision Viterbi Decoder system by using high speed radix-4 Add-Compare-Select architecture is proposed. Two-pointer Even algorithm is also introduced into the Trace Back unit in the aim of hardware-efficiency. • Several state-of-the-art technologies are integrated into the complete baseband transceiver system, in the aim of implementing a highly-optimized UWB communication system. • An improved design flow is proposed for complex system implementation which can be used for general Field-Programmable Gate Array (FPGA) designs. The design method not only dramatically reduces the time for functional verification, but also provides automatic analysis such as errors and output delays for the implemented hardware systems. • A virtual communication environment is established for validating the proposed MB-OFDM transceiver system. This methodology is proved to be easy for usage and convenient for analyzing the digital baseband system without analog frontend under different communication environments. This PhD thesis is organized in six chapters. In the chapter 1 a brief introduction to the UWB field, as well as the related work, is done, along with the motivation of MBOFDM system development. In the chapter 2, the general information and requirement of MB-OFDM UWB wireless communication protocol is presented. In the chapter 3, the architecture of the MB-OFDM digital baseband transceiver system is presented. The design of the proposed algorithm and architecture for each processing element is detailed in this chapter. Design challenges of such system involve trade-off discussions among design complexity, power consumption, hardware cost, system performance, and some other aspects. All these factors are analyzed and discussed. In the chapter 4, the hardware/software co-design methodology is proposed. Each step of this design flow will be detailed by taking some examples that we met during system development. Then, taking advantages of this design strategy, the Virtual Communication procedure is carried out so as to test and analyze the proposed transceiver architecture. Experimental results from the co-simulation and synthesis report of the implemented FPGA system are given in the chapter 5. The chapter 6 includes conclusions and future work, as well as the results derived from this PhD work.

Molecular mechanisms of sound amplification in the mammalian cochlea

Mammalian hearing depends on the enhanced mechanical properties of the basilar membrane within the cochlear duct. The enhancement arises through the action of outer hair cells that act like force generators within the organ of Corti. Simple considerations show that underlying mechanism of somatic motility depends on local area changes within the lateral membrane of the cell. The molecular basis for this phenomenon is a dense array of particles that are inserted into the basolateral membrane and that are capable of sensing membrane potential field. We show here that outer hair cells selectively take up fructose, at rates high enough to suggest that a sugar transporter may be part of the motor complex. The relation of these findings to a recent candidate for the molecular motor is also discussed.

Estimativa da incidência de câncer nas redes regionais de saúde e municípios do estado de São Paulo, 2010

Introdução: Estatísticas sobre a ocorrência de casos novos de câncer são fundamentais para o planejamento e monitoramento das ações de controle da doença. No estado de São Paulo, a incidência de câncer é obtida indiretamente por meio de estimativas oficiais (para o estado como um todo e sua capital) e, de forma direta, em municípios cobertos por Registro de Câncer de Base Populacional (RCBP). Existem, atualmente, três RCBP ativos (São Paulo, Jaú e Santos), um inativo (Barretos) e um em reimplantação (Campinas). Dado o desconhecimento do panorama da incidência de câncer em áreas não cobertas por RCBP, este estudo teve como objetivo estimar a incidência de câncer, calcular taxas brutas e padronizadas por idade, específicas por sexo e localização primária do tumor para as 17 Redes Regionais de Atenção à Saúde (RRAS) de São Paulo e municípios, em 2010. Método: Utilizou-se como estimador da incidência de câncer a razão Incidência/Mortalidade (I/M), por sexo, grupo etário quinquenal dos 0 aos 80 anos e localização primária do tumor. O numerador da razão foi formado pelo número agregado de casos novos entre 2006-2010, em dois RCBP ativos (Jaú e São Paulo, respectivamente, com cobertura correspondente a 0,3 por cento e 27,3 por cento da população estadual). No denominador, o número de óbitos oficial nas respectivas áreas e período. O número estimado de casos novos resultou da multiplicação das I/M pelo número de óbitos por câncer registrados em 2010 para o conjunto de municípios formadores de cada uma das RRAS ou para cada município. O método de referência foi aquele utilizado no Globocan series, da Agência Internacional de Pesquisa contra o Câncer. O ajuste por idade das taxas de incidência ocorreu pelo método direto, tendo como padrão a população mundial. Resultados: Estimaram-se 53.476 casos novos de câncer para o sexo masculino e 55.073 casos para o feminino (excluindo-se os casos de câncer de pele não melanoma), com taxas padronizadas de 261/100.000 e 217/100.000, respectivamente. No sexo masculino, a RRAS 6 apresentou para todos os cânceres a maior taxa de incidência padronizada (285/100.000), e a RRAS 10, a menor (207/100.000). Os cânceres mais incidentes em homens foram próstata (77/100.000), cólon/reto/anus (27/100.000) e traqueia/brônquio/pulmão (16/100.000). Entre as mulheres, as taxas de incidência padronizadas por idade foram de 170/100.000 (RRAS 11) a 252/100.000 (RRAS 07); o câncer de mama foi o mais incidente (58/100.000), seguido pelos tumores de cólon/reto/anus (23/100.000) e de colo uterino (9/100.000). Conclusões: Os resultados apontaram diferentes padrões de incidência com taxas que ultrapassaram a magnitude estadual. Dados provenientes de RCBP locais podem ser usados na obtenção indireta de estimativas regionais e locais. Neste estudo, as taxas de incidência apresentadas podem estar sub ou superestimadas refletindo a qualidade, completitude e padrões observados no RCBP de maior representatividade considerado na análise.

Diseño y validación de políticas de transmisión de datos en redes inalámbricas de sensores de bajo consumo

El envejecimiento de la poblaci on, el sobrepeso, y el aumento de enfermedades cr onicas, tales como: afecciones cardiacas, diabetes e hipertensi on, plantean nuevos retos al sistema de salud p ublica. En este contexto, las redes de sensores inal ambricas corporales (Wireless Body Area Networks (WBAN)/Wireless Body Sensor Networks (WBSN)) tienen gran potencial para revolucionar el sistema de salud ya que facilitan el seguimiento, la monitorizaci on y el diagn ostico de pacientes en casa, mejorando as su calidad de vida y reduciendo los costes asociados la asistencia sanitaria. Las redes WBAN/WBSN est an constituidas por nodos sensores que miden diferentes variables siol ogicas y cin eticas y disponen de interfaces inal ambricas de bajo coste para transmitir en tiempo real la informaci on a dispositivos en otros niveles de la red. En este tipo de redes, la transmisi on inal ambrica de datos es probablemente la tarea que presenta mayor consumo de energ a, por lo que dicho consumo debe ser reducido para maximizar su vida util. Adicionalmente, en escenarios WBAN/WBSN, el cuerpo humano juega un papel muy importante en la calidad de la comunicaci on. El cuerpo act ua como un canal de comunicaci on para la propagaci on de ondas electromagn eticas, por lo que el comportamiento de este tipo de canal representa un conjunto unico de desaf os para la transferencia able de datos...

Computer Networks Virtualization with GNS3: Evaluating a solution to optimize resources and achieve a distance learning

Designing educational resources allow students to modify their learning process. In particular, on-line and downloadable educational resources have been successfully used in engineering education the last years [1]. Usually, these resources are free and accessible from web. In addition, they are designed and developed by lecturers and used by their students. But, they are rarely developed by students in order to be used by other students. In this work-in-progress, lecturers and students are working together to implement educational resources, which can be used by students to improve the learning process of computer networks subject in engineering studies. In particular, network topologies to model LAN (Local Area Network) and MAN (Metropolitan Area Network) are virtualized in order to simulate the behavior of the links and nodes when they are interconnected with different physical and logical design.

Virtualización de Redes de Computadores con GNS3: Evaluación de soluciones para el aprendizaje a distancia

El diseño de los recursos educativos permite a los estudiantes modificar su proceso de aprendizaje. En particular, los recursos educativos on-line descargables han sido utilizados con éxito en la educación en ingeniería en los últimos años. Por lo general, estos recursos son gratuitos y accesibles desde la web. Además, son diseñados y desarrollados por profesores y usados por sus estudiantes. Pero, rara vez se desarrollan por los estudiantes con el fin de ser utilizados por otros estudiantes. En este artículo, profesores y estudiantes trabajan juntos para implementar recursos educativos de libre distribución, que puedan ser utilizados por los estudiantes para mejorar el proceso de aprendizaje de redes de computadores en los estudios de ingeniería. En particular, se virtualizan topologías de red para modelar redes LAN (Local Area Network) y MAN (Metropolitan Area Network) con el fin de simular el comportamiento de los enlaces y nodos cuando están interconectados con diferente diseño físico y lógico. Para ello, usando el software de libre distribución GNS3, y teniendo como base la configuración de la red del laboratorio L24 de la EPS, se construye un entorno virtual que simula las posibilidades reales de este laboratorio.

Essays on Personal Bankruptcy Law and Small Business Financing

Thesis (Ph.D.)--University of Washington, 2016-06

Implications of social capital for the inclusion of people with disabilities and families in community life

This paper seeks to ascertain the usefulness of the theory of social capital as a framework for developing and sustaining the inclusion of people with disabilities and families in community life. We discuss the theoretical elements of social capital and assess its relevance when understanding both the experiences of people with disabilities and their families and the possible implications for policy and programme efforts to promote inclusion. Preliminary findings from two studies of the experiences and social networks of people with disabilities and their families in communities in regional and rural Australia are presented. It is argued that to date, people with disabilities and their families have largely been excluded from the broader social capital debate and that social capital thinking has had minimal influence on efforts to achieve the inclusion of people with disabilities into community life. It is further argued that new paradigms of support are needed that build capacity and social capital through working alongside individuals and families to influence not only outcomes for them, but also for the communities on which they live. The local area coordination model as it has developed in Australia since 1989 provides some instructive signposts for integrating individual, family and community approaches. It is concluded that social capital theory can make a contribution to inclusion theory and practice but we should use it with circumspection.

History and habit in the mobilization of ICT resources

Evidence demonstrates that the digital divide is deepening despite strategies mobilized worldwide to reduce it. In disadvantaged communities, beyond training and infrastructural issues, there often lies a range of cultural and historically formed relationships that affect people's adoption of ICTs. This article presents an analysis of local resident's engagement with their council's pilot project to develop a computer facility in their community center. We ask, to what extent can people in poor urban communities, once trained, be expected to volunteer to work on furthering community education and development in ICTs in their local area? Findings indicate four patterns of individual engagement with the computer project: reflexive, utilitarian, distributive, and nonparticipatory. It is argued that local people engaged with the intervention in historically patterned and locally distinctive ways that served immediate personal and pragmatic ends. They did not adopt the long-term strategic goals of the council or university.

A simple regional-scale model for forecasting sorghum yield across North-Eastern Australia

Sorghum is the main dryland summer crop in NE Australia and a number of agricultural businesses would benefit from an ability to forecast production likelihood at regional scale. In this study we sought to develop a simple agro-climatic modelling approach for predicting shire (statistical local area) sorghum yield. Actual shire yield data, available for the period 1983-1997 from the Australian Bureau of Statistics, were used to train the model. Shire yield was related to a water stress index (SI) that was derived from the agro-climatic model. The model involved a simple fallow and crop water balance that was driven by climate data available at recording stations within each shire. Parameters defining the soil water holding capacity, maximum number of sowings (MXNS) in any year, planting rainfall requirement, and critical period for stress during the crop cycle were optimised as part of the model fitting procedure. Cross-validated correlations (CVR) ranged from 0.5 to 0.9 at shire scale. When aggregated to regional and national scales, 78-84% of the annual variation in sorghum yield was explained. The model was used to examine trends in sorghum productivity and the approach to using it in an operational forecasting system was outlined. (c) 2005 Elsevier B.V. All rights reserved.

Short-Term Perturbations and Tourism Effects: The case of SARS in China

In China, protected areas are one of the main destinations attracting tourists and homeland for many poor people living in and around them. Based on a case study, the paper focuses on correlation between tourism and poverty alleviation by tracing the cash flows to the local poor. It also reviews the social and environmental effects of tourism on local area. The case study is conducted in a group of protected areas in Qinling Mountain Region in Shaanxi, a western province in China. Qinling Mountain is one of the most important distribution zones for Giant Panda and some other endangered wildlife such as Golden Takin and Golden Monkey. The tourism development in the region is happening. Research indicates that there is 29.33%, of tourist expenditure is going to local households, directly or indirectly. Tourist spends US$7.11 (13.67%) in food and beverage, and US$6.39 (12.23%) in accommodation service, which are the greatest contributors to local households in terms of tourism benefits. Local households can get US$8.15 from food/beverage and accommodation sectors, taking 56.64% of total income from tourism. Generally, tourism development benefits all stakeholders. However, poor people get less benefit. The paper analyses the barriers for the poor to be involved in tourism development, and discusses the government roles, major issues in implementation of Sustainable Tourism-Eliminating Poverty (ST-EP) model.

How the west was once: vegetation change in south-west Queensland from 1930 to 1995

Conflicting perceptions of past and present rangeland condition and limited historical data have led to debate regarding the management of vegetation in pastoral landscapes both internationally and in Australia. In light of this controversy we have sought to provide empirical evidence to determine the trajectory of vegetational change in a semi-arid rangeland for a significant portion of the 20th century using a suite of proxy measures. Ambathala Station, approximately 780 km west of Brisbane, in the semi-arid rangelands of south-western Queensland, Australia. We excavated stratified deposits of sheep manure which had accumulated beneath a shearing shed between the years 1930 and 1995. Multi-proxy data, including pollen and leaf cuticle analyses and analysis of historical aerial photography were coupled with a fine resolution radiocarbon chronology to generate a near annual history of vegetation on the property and local area. Aerial photography indicates that minor (< 5%) increases in the density of woody vegetation took place between 1951 and 1994 in two thirds of the study area not subjected to clearing. Areas that were selectively or entirely cleared prior to the 1950s (approximately 16% of the study area) had recovered to almost 60% of their original cover by the 1994 photo period. This slight thickening is only partially evident from pollen and leaf cuticle analyses of sheep faeces. Very little change in vegetation is revealed over the nearly 65 years based on the relative abundances of pollen taxonomic groups. Microhistological examination of sheep faeces provides evidence of dramatic changes in sheep diet. The majority of dietary changes are associated with climatic events of sustained above-average rainfall or persistent drought. Most notable in the dietary analysis is the absence of grass during the first two decades of the record. In contrast to prevailing perceptions and limited research into long-term vegetation change in the semi-arid areas of eastern Australia, the record of vegetation change at the Ambathala shearing shed indicates only a minor increase in woody vegetation cover and no decrease in grass cover on the property over the 65 years of pastoral activity covered by the study. However, there are marked changes in the abundance of grass cuticles in sheep faeces. The appearance and persistence of grass in sheep diets from the late 1940s can be attributed to the effects of periods of high rainfall and possibly some clearing and thinning of vegetation. Lower stock numbers may have allowed grass to persist through later drought years. The relative abundances of major groups of plant pollen have not changed significantly over the past 65 years.

A community-based wildlife survey: the knowledge and attitudes of residents of suburban Brisbane, with a focus on bandicoots

Within the expanding city of Brisbane in south-east Queensland, numerous fragments of native and regrowth vegetation are scattered across the largely urbanised landscape. These fragments provide refuge to a great diversity of native wildlife, and, provide residents with the opportunity to experience nature on their doorstep. To assess the diversity and abundance of this wildlife, recent changes in these parameters, and the value of wildlife and bushland fragments to residents of Brisbane, a questionnaire survey was distributed to 300 households each located adjacent to one of 38 urban bushland fragments. A total of 172 surveys (57%) were returned, producing 768 records of 83 fauna species, dominated by birds and mammals; bandicoots were widely reported from the 38 fragments. Several historical records provided evidence of recent local extinctions within fragments, highlighting the continuing declines in various species of native wildlife within Brisbane. Several human-wildlife conflicts were identified, but overall residents were tolerant of such conflicts. Bandicoots were disliked by a small minority (3%) of residents owing to the holes they dig in lawns and gardens in search of food. and their potential as vectors of ticks. Most respondents expressed ail appreciation for the presence of native wildlife (96%) and bushland fragments (97%) in their local area, emphasising the importance of incorporating human dimension values into the management of this urban biodiversity.

Decreased osteogenesis, increased cell senescence and elevated Dickkopf-1 secretion in human fracture non union stromal cells

The delicately orchestrated process of bone fracture healing is not always successful and long term non union of fractured bone occurs in 5-20% of all cases. Atrophic fracture non unions have been described as the most difficult to treat and this is thought to arise through a cellular and local failure of osteogenesis. However, little is known about the presence and osteogenic proficiency of cells in the local area of non union tissue. We have examined the growth and differentiation potential of cells isolated from human non union tissues compared with normal human bone marrow mesenchymal stromal cells (BMSC). We report the isolation and culture expansion of a population of non union stromal cells (NUSC) which have a CD profile similar to that of BMSC, i.e. CD34-ve, CD45-ve and CD105+ve. The NUSC demonstrated multipotentiality and differentiated to some extent along chondrogenic, adipogenic and osteogenic lineages. However, and importantly, the NUSC showed significantly reduced osteogenic differentiation and mineralization in vitro compared to BMSC. We also found increased levels of cell senescence in NUSC compared to BMSC based on culture growth kinetics and cell positivity for senescence associated beta galactosidase (SA-beta-Gal) activity. The reduced capacity of NUSC to form osteoblasts was associated with significantly elevated secretion of Dickkopf-1 (Dkk-1) which is an important inhibitor of Wnt signalling during osteogenesis, compared to BMSC. Conversely, treating BMSC with levels of rhDkk-1 that were equivalent to those levels secreted by NUSC inhibited the capacity of BMSC to undergo osteogenesis. Treating BMSC with NUSC conditioned medium also inhibited the capacity of the BMSC to undergo osteogenic differentiation when compared to their treatment with BMSC conditioned medium. Our results suggest that the development of fracture non union is linked with a localised reduced capacity of cells to undergo osteogenesis, which in turn is associated with increased cell senescence and Dkk-1 secretion.