Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates – application of factorial experiment design-

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one factor at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as polymer mortar aggregates, without significant loss of mechanical properties with regard to non-modified polymer mortars.

Hepatitis B vaccine - proposal for a standardized assessment of immune response

The authors developed a comparative study of the various methods of assessment of immune response to Hepatitis B vaccine. Eighty-six health care professionals underwent a vaccination programme with three doses of plasma-derived vaccine against Hepatitis B (H-B-Vax, Merck, Sharp & Dohme) given intra-muscularly. Assessment of immune response was carried out three months after the end of the programme, by radioimmunoassay (RIA) and enzymeimmunoassay (EIA). The results showed that the semi-quantitative assessment of Anti-HBs antibodies by RIA or EIA was perfectly comparable to the reference method (quantitative determination of antibodies by RIA). In view of these findings, the authors suggest a standardization of assessment of immune response to the vaccine, thus permitting correct planning of booster doses and easier comparison between different studies

Supply chain optimization of residual forestry biomass for bioenergy production: the case study of Portugal

Within a large set of renewable energies being explored to tackle energy sourcing problems, bioenergy can represent an attractive solution if effectively managed. The supply chain design supported by mathematical programming can be used as a decision support tool to the successful bioenergy production systems establishment. This strategic decision problem is addressed in this paper where we intent to study the design of the residual forestry biomass to bioelectricity production in the Portuguese context. In order to contribute to attain better solutions a mixed integer linear programming (MILP) model is developed and applied in order to optimize the design and planning of the bioenergy supply chain. While minimizing the total supply chain cost the production energy facilities capacity and location are defined. The model also includes the optimal selection of biomass amounts and sources, the transportation modes selection, and links that must be established for biomass transportation and products delivers to markets. Results illustrate the positive contribution of the mathematical programming approach to achieve viable economic solutions. Sensitivity analysis on the most uncertain parameters was performed: biomass availability, transportation costs, fixed operating costs and investment costs. (C) 2015 Elsevier Ltd. All rights reserved.

Planning smart cities using wireless low energy monitoring systems

Thesis to obtain the Master Degree in Electronics and Telecommunications Engineering

Maximizing the Social Welfare of Virtual Power Players Operation in Case of Excessive Wind Power

The integration of growing amounts of distributed generation in power systems, namely at distribution networks level, has been fostered by energy policies in several countries around the world, including in Europe. This intensive integration of distributed, non-dispatchable, and natural sources based generation (including wind power) has caused several changes in the operation and planning of power systems and of electricity markets. Sometimes the available non-dispatchable generation is higher than the demand. This generation must be used; otherwise it is wasted if not stored or used to supply additional demand. New policies and market rules, as well as new players, are needed in order to competitively integrate all the resources. The methodology proposed in this paper aims at the maximization of the social welfare in a distribution network operated by a virtual power player that aggregates and manages the available energy resources. When facing a situation of excessive non-dispatchable generation, including wind power, real time pricing is applied in order to induce the increase of consumption so that wind curtailment is minimized. This method is especially useful when actual and day-ahead resources forecast differ significantly. The distribution network characteristics and concerns are addressed by including the network constraints in the optimization model. The proposed methodology has been implemented in GAMS optimization tool and its application is illustrated in this paper using a real 937-bus distribution network with 20.310 consumers and 548 distributed generators, some of them non-dispatchable and with must take contracts. The implemented scenario corresponds to a real day in Portuguese power system.

Dispatch of distributed Energy Resources to Provide Energy and Reserve in Smart Grids using a Particle Swarm Optimization Approach

The smart grid concept is a key issue in the future power systems, namely at the distribution level, with deep concerns in the operation and planning of these systems. Several advantages and benefits for both technical and economic operation of the power system and of the electricity markets are recognized. The increasing integration of demand response and distributed generation resources, all of them mostly with small scale distributed characteristics, leads to the need of aggregating entities such as Virtual Power Players. The operation business models become more complex in the context of smart grid operation. Computational intelligence methods can be used to give a suitable solution for the resources scheduling problem considering the time constraints. This paper proposes a methodology for a joint dispatch of demand response and distributed generation to provide energy and reserve by a virtual power player that operates a distribution network. The optimal schedule minimizes the operation costs and it is obtained using a particle swarm optimization approach, which is compared with a deterministic approach used as reference methodology. The proposed method is applied to a 33-bus distribution network with 32 medium voltage consumers and 66 distributed generation units.

Study of Load Curves Concerning the Influence of Socioeconomic and Cultural Issues

The increase of electricity demand in Brazil, the lack of the next major hydroelectric reservoirs implementation, and the growth of environmental concerns lead utilities to seek an improved system planning to meet these energy needs. The great diversity of economic, social, climatic, and cultural conditions in the country have been causing a more difficult planning of the power system. The work presented in this paper concerns the development of an algorithm that aims studying the influence of the issues mentioned in load curves. Focus is given to residential consumers. The consumption device with highest influence in the load curve is also identified. The methodology developed gains increasing importance in the system planning and operation, namely in the smart grids context.

Synthesis of biodiesel from wastes of food industry via direct transesterification with methanol/carbon dioxide mixtures

Dissertation presented at Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa to obtain the degree of Master in Chemical and Biochemical Engineering

The influence of task design on upper limb muscles fatigue during low-load repetitive work: A systematic review

Ergonomic interventions such as increased scheduled breaks or job rotation have been proposed to reduce upper limb muscle fatigue in repetitive low-load work. This review was performed to summarize and analyze the studies investigating the effect of job rotation and work-rest schemes, as well as, work pace, cycle time and duty cycle, on upper limb muscle fatigue. The effects of these work organization factors on subjective fatigue or discomfort were also analyzed. This review was based on relevant articles published in PubMed, Scopus and Web of Science. The studies included in this review were performed in humans and assessed muscle fatigue in upper limbs. 14 articles were included in the systematic review. Few studies were performed in a real work environment and the most common methods used to assess muscle fatigue were surface electromyography (EMG). No consistent results were found related to the effects of job rotation on muscle activity and subjective measurements of fatigue. Rest breaks had some positive effects, particularly in perceived discomfort. The increase in work pace reveals a higher muscular load in specific muscles. The duration of experiments and characteristics of participants appear to be the factors that most have influenced the results. Future research should be focused on the improvement of the experimental protocols and instrumentation, in order to the outcomes represent adequately the actual working conditions. Relevance to industry: Introducing more physical workload variation in low-load repetitive work is considered an effective ergonomic intervention against muscle fatigue and musculoskeletal disorders in industry. Results will be useful to identify the need of future research, which will eventually lead to the adoption of best industrial work practices according to the workers capabilities.

Energy analysis of Multi-legged Locomotion Systems

4th International Conference on Climbing and Walking Robots - From Biology to Industrial Applications

Urban land cover change detection analysis and modeling spatio-temporal Growth dynamics using Remote Sensing and GIS Techniques: A case study of Dhaka, Bangladesh

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Analysis of benefits of the process of certification on international standars: ISO 9001-2008 for Mapfre Assistencia Portugal

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

A SARIMA forecasting model to predict the number of cases of dengue in Campinas, State of São Paulo, Brazil

INTRODUCTION: Forecasting dengue cases in a population by using time-series models can provide useful information that can be used to facilitate the planning of public health interventions. The objective of this article was to develop a forecasting model for dengue incidence in Campinas, southeast Brazil, considering the Box-Jenkins modeling approach. METHODS: The forecasting model for dengue incidence was performed with R software using the seasonal autoregressive integrated moving average (SARIMA) model. We fitted a model based on the reported monthly incidence of dengue from 1998 to 2008, and we validated the model using the data collected between January and December of 2009. RESULTS: SARIMA (2,1,2) (1,1,1)12 was the model with the best fit for data. This model indicated that the number of dengue cases in a given month can be estimated by the number of dengue cases occurring one, two and twelve months prior. The predicted values for 2009 are relatively close to the observed values. CONCLUSIONS: The results of this article indicate that SARIMA models are useful tools for monitoring dengue incidence. We also observe that the SARIMA model is capable of representing with relative precision the number of cases in a next year.

Assessing the community needs of mental health residential care service users in Republic of Moldova

RESUMO: Background: Problemas de saúde mental são um grande problema clínico e social na República da Moldávia, representando uma quota significante de deficiência, sendo classificada no top cinco das dez linhas na hierarquia das condições. A taxa de incidência tem sido crescente na República da Moldávia, atingindo cerca de 15.000 por ano (14,655 em 2011), ou seja, 411,4 por 100 mil habitantes, e uma taxa de prevalência de 97.525 pessoas em 2011, ou seja, 2,737.9 por 100 mil habitantes. Sistema de atendimento psiquiátrico fornece serviços de saúde mental escassos a nível da comunidade, visando principalmente terapia hospitalar, centralizada, através de uma rede de três hospitais psiquiátricos, com 1.860 camas e 4 sanatórios psico- neurológicos com 1890 camas, assim alimentando-se a estigmatização do paciente. Objetivos: O objetivo deste estudo foi a avaliação das necessidades individuais dos beneficiários e do seu nível de autonomia dentro de cuidados residenciais, para o planeamento de reformas de saúde mental e desinstitucionalização na República da Moldávia. Este estudo foi encomendado pelo Ministério do Trabalho, Proteção Social e da Família e pelo Ministério da Saúde, com o apoio da Organização Mundial da Saúde, para determinar o cumprimento eficaz do artigo 19 da Convenção da ONU. O estudo tem os seguintes objetivos: Avaliar o nível de autonomia dos residentes nos hospitais psiquiátricos e sanatórios psico-neurológico, usando uma amostra representativa de 10 por ce nto do número total de pacientes/residentes e comparação cruzada; Para avaliar quatro sanatórios psico-neurológicos para adultos e três hospitais psiquiátricos; Para desenvolver recomendações para o planeamento da desinstitucionalização das pessoas com problemas de saúde mental e colocação na comunidade com base nos resultados do estudo. Metodologia e resultados: O estudo fez uso de duas ferramentas globais: questionário para a avaliação individual dos residentes do estabelecimento de saúde mental, e questionário de avaliação institucional. Todos os entrevistados foram divididos em quatro categorias conforme com o grau de dependência e preparação de viver de forma independente na comunidade. Apenas 1,2% dos entrevistados de PNHB eram totalmente dependentes de terceiros ou serviços especializados, tornando-se a categoria 4, que necessitam de cuidados e apoio contínuo. No PH esta categoria de pessoas é ausente. Conclusões: A condição dos entrevistados foi pior em PNBH que em PH. No entanto, ainda, aqueles que estão prontos para ser desinstitucionalizados correspondem com a maior parte dos entrevistados. Todos os hospitais tinham o consentimento do utente para admissão e tratamento, enquanto não houve consentimento qualquer em PNBH. É bastante óbvio que tanto os hospitais como também a sistema de assistência residencial não atingem a sua finalidade, o que significa que a maioria dos utentes pode ser desinstitucionalizados, sem qualquer terapia de suporte.------------------ABSTRACT: Background: Mental health problems are a major clinical and social issue in the Republic of Moldova,accounting for a significant share of disability and ranking in top five of the ten lines in the hierarchy of conditions. The incidence rate has been growing in the Republic of Moldova to reach approximately 15 thousand a year (14,655 in 2011), i.e. 411.4 per 100 thousand population, and a prevalence rate of 97,525 thousand people in 2011, i.e. 2,737.9 per 100 thousand population. Psychiatric care system provides for scanty mental health services at community level, aiming mainly at centralized hospital-based therapy through a network of three psychiatric hospitals tallying up 1,860 beds and 4 psycho-neurological boarding houses with 1,890 beds, thus fuelling up patient stigmatization. Objectives: The purpose of this study was to assess the individual needs of beneficiaries and their level of autonomy within residential care for the planning of mental health system reforms and deinstitutionalization in the Republic of Moldova. This study was commissioned by the Ministry of Labour, Social Protection and Family and by the Ministry of Health, with the World Health Organization support, to provide for effective enforcement of article 19 of the UN CRPD. The study pursued the following goals: To evaluate the level of autonomy of the psychiatric hospital and psycho-neurological boarding house residents by using a representative sample of 10 per cent of the total number of patients / residents and cross-comparison; To evaluate four psycho-neurological boarding houses for adults and three psychiatric hospitals; To develop recommendations for planning the deinstitutionalization of people with mental health problems and community placement based on the study findings.Methodology and results: The study made use of two global tools: questionnaire for individual assessment of mental health facility residents, and institutional assessment questionnaire. All interviewees were divided into four categories by one’s degree of dependence and readiness to live independently in the community. Only 1.2% of respondents from PNHB were fully dependent on a third party or specialized services, making up category 4, requiring continuous care and support. In PH this category of people is absent.Conclusions: The condition of respondents was worse in PNBH than in PH. However, yet, those ready to be deinstitutionalized accounted for most of respondents there. All hospitals had the resident’s consent to admission and treatment, whereas there was no consent in PNBH whatsoever. It is quite obvious that both the hospitals and residential care system do not achieve their intended purpose, meaning that the majority of residents may be deinstitutionalized without any support therapy.

Malaria in the State of Amazonas: a typical Brazilian tropical disease influenced by waves of economic development

In Brazil, more than 99% of malaria cases are reported in the Amazon, and the State of Amazonas accounts for 40% of this total. However, the accumulated experience and challenges in controlling malaria in this region in recent decades have not been reported. Throughout the first economic cycle during the rubber boom (1879 to 1912), malaria was recorded in the entire state, with the highest incidence in the villages near the Madeira River in the Southern part of the State of Amazonas. In the 1970s, during the second economic development cycle, the economy turned to the industrial sector and demanded a large labor force, resulting in a large migratory influx to the capital Manaus. Over time, a gradual increase in malaria transmission was observed in peri-urban areas. In the 1990s, the stimulation of agroforestry, particularly fish farming, led to the formation of permanent Anopheline breeding sites and increased malaria in settlements. The estimation of environmental impacts and the planning of measures to mitigate them, as seen in the construction of the Coari-Manaus gas pipeline, proved effective. Considering the changes occurred since the Amsterdam Conference in 1992, disease control has been based on early diagnosis and treatment, but the development of parasites that are resistant to major antimalarial drugs in Brazilian Amazon has posed a new challenge. Despite the decreased lethality and the gradual decrease in the number of malaria cases, disease elimination, which should be associated with government programs for economic development in the region, continues to be a challenge.