How fluids bend: the elastic expansion for higher-dimensional black holes

Hydrodynamics can be consistently formulated on surfaces of arbitrary co-dimension in a background space-time, providing the effective theory describing long-wavelength perturbations of black branes. When the co-dimension is non-zero, the system acquires fluid-elastic properties and constitutes what is called a fluid brane. Applying an effective action approach, the most general form of the free energy quadratic in the extrinsic curvature and extrinsic twist potential of stationary fluid brane configurations is constructed to second order in a derivative expansion. This construction generalizes the Helfrich-Canham bending energy for fluid membranes studied in theoretical biology to the case in which the fluid is rotating. It is found that stationary fluid brane configurations are characterized by a set of 3 elastic response coefficients, 3 hydrodynamic response coefficients and 1 spin response coefficient for co-dimension greater than one. Moreover, the elastic degrees of freedom present in the system are coupled to the hydrodynamic degrees of freedom. For co-dimension-1 surfaces we find a 8 independent parameter family of stationary fluid branes. It is further shown that elastic and spin corrections to (non)-extremal brane effective actions can be accounted for by a multipole expansion of the stress-energy tensor, therefore establishing a relation between the different formalisms of Carter, Capovilla-Guven and Vasilic-Vojinovic and between gravity and the effective description of stationary fluid branes. Finally, it is shown that the Young modulus found in the literature for black branes falls into the class predicted by this approach - a relation which is then used to make a proposal for the second order effective action of stationary blackfolds and to find the corrected horizon angular velocity of thin black rings.

Caracterización estructural de los rellenos situados en el trasdós de bóvedas de edificios históricos

El papel esencial de los rellenos en el comportamiento y la estabilidad de las construcciones de fábrica ha sido sorprendentemente ignorado en la bibliografía técnica, contribuyendo este trabajo a cubrir esta laguna del conocimiento. Se presenta en primer lugar la configuración morfológica de los rellenos del trasdós de bóvedas en la Península Ibérica en tres periodos histórico-técnicos: la construcción romana, la románica y la gótica. La clasificación se ha realizado en base a inspecciones visuales de diferentes edificios. En sendos anexos se presentan análisis comparados de la base de datos que se ha reunido y las fichas de las construcciones consideradas. En segundo lugar se ha caracterizado el papel estructural de los rellenos, identificándose las características intrínsecas que se estiman más significativas de dichos rellenos en relación tanto con su propia configuración como con su función estructural. Muy en particular se proponen unas leyes de empujes coherentes con la naturaleza y con las condiciones de contorno de los rellenos y las bóvedas. En esta tesis se ha desarrollado una sencilla, potente y suficiente herramienta de análisis que considera las principales variables que intervienen en el comportamiento de una estructura de fábrica, incluyendo muy particularmente los rellenos. Para ello se ha planteado una herramienta basada en el análisis límite que incluye la comprobación tensional de los diferentes esfuerzos, normales o tangenciales, así como la interfaz entre bóvedas y rellenos, dotándose a los técnicos de una herramienta que permite entender estas estructuras, de complejo funcionamiento. La herramienta propuesta incluye consideraciones energéticas para encontrar la solución más cercana al funcionamiento real. La herramienta se ha calibrado con ejemplos analizados por otros autores con diferentes procedimientos, poniéndose de manifiesto su suficiente precisión y eficacia, especialmente si se tiene en cuenta que requiere sólo de unos datos mínimos. La calibración se ha extendido al ensayo en modelo reducido de este tipo de estructuras en el Laboratorio de Estructuras de la Escuela de Ingenieros de Caminos, Canales y Puertos de Madrid. Fruto de esa calibración, se ha realizado un amplio estudio paramétrico que permite cuantificar la influencia que tienen en el comportamiento estructural variables como el apuntamiento de las bóvedas (relación luz/flecha), su esbeltez (relación luz/canto en clave), la altura de los rellenos rígidos, la altura de los rellenos granulares, etc. Ese estudio ha permitido identificar los puntos críticos, las ratios características que condicionan el comportamiento y, en fin, los aspectos clave del análisis estructural de estas construcciones desde el punto de vista de la interrelación, hasta ahora desconocida, de estructura y relleno, que también es estructura. Ello permitirá orientar de mejor manera las inspecciones de estas estructuras y sus análisis estructurales. Finalmente, la tesis concluye con el desarrollo de tres ejemplos, correspondientes cada uno de ellos a los periodos históricos referidos, en los que se pone de manifiesto el papel crucial de los rellenos en la estabilidad no sólo de las bóvedas sino del resto de elementos estructurales que componen un edificio (pilares, muros, botareles, etc.). Al final se presentan las conclusiones del trabajo y se enumeran las muchas líneas de trabajo que quedan abiertas tras esta tesis. It is surprising that the essential role of the backfill at the extrados of masonry vaults and domes has been ignored or misunderstood in the technical literature. The main purpose of this work is to contribute to overcome such a lacuna. Firstly, the morphological configuration of backfill that can be found in the Iberian Peninsula in Roman, Romanesque and Gothic buildings is also presented. Two annexes are devoted to show the collected database and the result of its analysis. Then, the structural role of backfill is characterised, as well as the intrinsic and most significant properties related both to its configuration and structural function. Thus, specific thrust values are proposed to analyse such structures, taking into account the nature and boundary conditions of walls and vaults. The simple, powerful and sufficient tool of analysis that has been developed is also presented, including the main variables involved, especially the backfill. The limit analysis method, followed by a stress verification, including the extrados of vaults and backfill interface, and an enhanced algorithm based on energetic considerations, are used to provide technicians a tool to understand this type of structures efficiently, in a balanced situation between the rather scarce amount of information and sufficient accuracy and liability. The tool was calibrated by comparing the experimental and theoretical results provided by different authors regarding several examples, as well as our own experimental campaign carried out at the Civil Engineering School of Madrid. A parametric study is also developed, providing original information about the structural importance of several parameters, as the span-to-depth or span-to-rise ratios, relative height of backfill, etc. As a result of this analysis, critical points and tendencies of structural behaviour were detected, helping technicians to inspect and analyse these constructions, also revealing some particularities related to their construction. Furthermore, a set of three examples corresponding to the three structural typologies analysed (Roman, Romanesque and Gothic) is studied. The crucial importance of backfill is then highlighted, not only for the stability of vaults or domes, but also for the equilibrium of walls, pillars and buttresses. Finally, the conclusions of the study and the future research fields are also presented.

Arquitectura industrial tabacalera en la España peninsular: secaderos y fábricas

La Arquitectura industrial del tabaco en España está representada por dos tipos de construcciones, que corresponden a las dos fases en las que se divide el proceso de producción del tabaco: los secaderos (arquitectura bioclimática donde se realiza el secado), y las fábricas (centros donde se elabora el tabaco procedente de los secaderos). Las fábricas se repartieron por todo el territorio español, ocupando preferiblemente los lugares costeros, aunque existen casos en los que su localización obedecía a razones políticas. Estos edificios, en su mayoría, incluidos en los centros históricos de las ciudades, han cambiando de uso, y las antiguas fábricas de tabaco se han transformado en su mayoría, en centros de cultura, o centros sociales y representativos. La tesis surge del análisis de las características constructivas de la arquitectura industrial del tabaco: de los secaderos y de las fábricas, por tratarse de una tipología con suficiente entidad y un ejemplo de arquitectura bioclimática de producción en el caso de los secaderos, y por conseguir haberse adaptado a otros usos en el caso de las fábricas. La arquitectura de producción emplea un lenguaje acorde con los avances de la industrialización, anticipando materiales y estructuras, y condensando en una tipología específica las complejas relaciones establecidas entre producto, hombres y espacio. Estos edificios tuvieron una extensa implantación en el territorio, y se caracterizan por una serie de valores tecnológicos, arquitectónicos, sociológicos y paisajísticos, que hacen de ellos un documento de primera magnitud para conocer: la evolución e implantación de las técnicas constructivas (materiales y estructuras), los procesos de innovación tipológica y la estructura económica y procedimientos técnicos utilizados. El territorio en el que se insertan constituye su contexto territorial, por lo que no sería adecuado considerar estos edificios como elementos aislados, sin analizar la relación con el entorno en el que se generaron. Por este motivo, se analizan las condiciones higrotérmicas ambientales de los secaderos para compararlas con las de confort humano y establecer relaciones y parámetros compatibles. Los ejemplos analizados de secaderos son todos de fábrica. El uso del ladrillo como módulo principal para la elaboración de un edificio, supone la consideración de un “grado cero” de todo el aparato constructivo y compositivo de la arquitectura. Dejar el ladrillo visto, supone hacer explícitos todos los procesos acumulativos. Este elemento mínimo, permite unas posibilidades enormemente abiertas, pero no absolutamente aleatorias, que definen su propia lógica combinatoria. La exigencia de sinceridad, característica de la arquitectura industrial, en la exposición de los materiales, exhibiéndolos en su propia naturaleza y en el modo real de ser utilizados, se hace patente en este tipo de construcción. Se realiza un estudio de permeabilidad en las fachadas de los secaderos, para determinar el grado de ventilación y su relación con la orientación, el patrón de celosía empleado y el volumen total. Este sistema de acondicionamiento climático específico, puede servir de recurso a otras construcciones, por lo que se podría trasladar el sistema constructivo y formal de los secaderos a otros usos, desde una doble vertiente: Arquitectura para la adaptación climática al entorno. Arquitectura como generadora de condiciones climáticas específicas, en el interior. La utilidad de los secaderos es fundamentalmente: proporcionar sombra, ventilación y un espacio cubierto, pero permeable en sus fachadas. La arquitectura industrial debe ser reconocida dentro del conjunto patrimonial, debido a sus características propias que permiten su diferenciación del resto de la arquitectura. Conocer la estructura productiva permite analizar correctamente estas construcciones, ya que el programa inicial es básico para entender la organización del espacio interior. Las fábricas no se situaron cerca de las zonas de producción del tabaco, excepto en dos casos: Cádiz y Palazuelo, en los que existen secaderos y campos de cultivo de hoja de tabaco en las áreas cercanas. La principal causa de esta separación es que el proceso de obtención de tabaco es un proceso dividido en dos fases principales: proceso primario y proceso secundario. En el proceso primario la hoja de tabaco se seca en los secaderos, en los que es determinante el clima, pero únicamente en el caso del secado del tabaco al aire. En el proceso secundario sin embargo, el tabaco llega previamente tratado a las fábricas, por lo que no influye el clima en esta parte del proceso. Esta razón determina que en las áreas climáticas donde se centra el estudio, haya zonas en las que existen fábrica y secaderos y otras en las que únicamente existe fábrica, o sólo secaderos. La localización de las fábricas atendía a razones de muy diferente índole, las más importantes fueron: geográficas, estratégicas, y políticas. En la mayoría de las fábricas la elección de la ciudad de emplazamiento estaba ligada a la recepción de la materia prima, que principalmente se hacía por vía marítima, o acuática (el caso de Sevilla), y por vía terrestre, utilizando como medio de transporte el ferrocarril. Sólo dos casos, de las antiguas fábricas, corresponden a razones políticas, son las dos únicas que no están en la costa: Madrid y Logroño. La de Madrid se construyó por centralidad política, y porque geográficamente ocupaba el punto central de todas las comunicaciones terrestres por carretera y ferrocarril. Muchas de las fábricas se situaron cercanas a las estaciones de ferrocarril. La de Logroño atendió, sin embargo, a razones políticas. Para finalizar, se realiza un estudio comparativo de las fábricas de Sevilla, Madrid y San Sebastián. Las razones que justifican esta elección son: - La de Sevilla fue históricamente la primera fábrica y la más importante. - La de Madrid fue la más importante a nivel administrativo, la sede de Tabacalera se instaló en la capital, y después de la de Sevilla, fue la que sirvió de modelo al resto de las fábricas. - La de San Sebastián era la más grande del Norte. Los análisis que se han realizado son de: volumen y superficies de patios, superficies de cubierta, permeabilidad o huecos en fachadas, orientación y soleamiento de patios, distribución espacial interior y organización, y evolución de usos. Podemos observar que en la mayoría de estas fábricas ha habido una transformación en el uso, pasando de ser edificios industriales a edificios culturales. Estas construcciones se pueden considerar como infraestructuras adaptables, por ser útiles, sostenibles y funcionales. ABSTRACT The Spanish industrial architecture of tobacco is represented by two construction types that correspond to the two phases of tobacco production: the drying sheds (bioclimatic constructions where the drying process takes place) and factories (centres where tobacco is processed after the drying process). The factories were distributed throughout the Spanish territory, preferably occupying coastal locations, although some of them were located elsewhere following political reasons. Most of the buildings inside city centres have suffered changes in their use, becoming cultural, social or representative centres. This thesis attempts the analysis of the constructive systems employed in tobacco industrial architecture, from drying sheds to factories. The drying sheds are an example of bioclimatic industrial architecture. The factories are a typology that have successfully adapted to new uses. Industrial architecture uses a language that follows the advances in industrialization, anticipating new materials and structures, and merging the complex relationships established among products, human beings, space and locations. These buildings were promoted extensively in the country. They are characterized by technological architectural sociological and landscaping innovations. They are considered as important examples of the evolution and the implementation of construction techniques (building materials and structures). They are also considered as examples of innovation in the building typology, in their economic structure and in the technologies that they have applied. The settings in which the drying sheds are placed have an important influence in them. They cannot be considered as isolated elements. Instead, there is a close relationship between drying sheds and the surroundings in which they are located. Drying sheds’ hygrotermal and environmental conditions are analyzed in this thesis to compare them with the values of human comfort and find suitable relationships and parameters. All the drying sheds that have been analyzed are constructed with brick. This implies a consideration of “zero degree” for both the construction and the composition of the architectural process. The detailing - entails making all the accumulative processes explicit as the brick walls are left exposed. This minimal component allows a wide range of options that are never random but based on the logic of the way in which it is combined. The “sincerity” in the exposition of material, displaying them in their very nature and showing how they are really used, is a basic characteristic of industrial architecture, and it is even more expressive in these types of buildings. The walls of the drying sheds undergo a permeability assessment in order to determine the degree of ventilation and orientation, the lattice pattern used and the overall volume. This specific conditioning system can serve as a resource for other buildings, and consequently, it could be transferred to other uses within a two-pronged approach: -Climatically adapted architecture that takes into account the surroundings. -Architecture as a generator of specific climatic conditions indoors. Drying sheds’ main purposes / aims deal with how to provide shade, ventilation and a covered space as well as permeability. The industrial architecture must be recognized as historical valuable buildings due to its intrinsic and distinctive characteristics. Knowing the productive structure, allow us to make a proper analysis of these buildings, since the basic aim, is to understand the spatial organization indoors. Factories did not come close to the tobacco production, with the exception of Cádiz and Palazuelo, where there are sheds and tobacco croplands nearby. The main reason for this separation is that the process of obtaining tobacco has two processes: the primary process and the secondary process. In the primary process tobacco leaves are left to dry. In the secondary process, previously manufactured tobacco allocated in the factories where the weather conditions are not important. This fact determines that in the climate areas where this study tales place there are some cases in which we can find both factories and drying sheds, and others where there are either factories or drying sheds only. The location of these factories met various demands, being the most outstanding the ones related to geographic, strategic and political reasons. In most factories the choice of its location was often linked to the incoming of raw goods, mainly delivered through waterways –it is the case of Seville,) and by land, using railways. The location of the factories was linked to political reasons in only two cases Madrid and Logroño, which are the only ones that are not placed near the coast. The one in Madrid was built due to its political centrality and because geographically speaking, it was the reference landmark of means of land and rail transports. Many factories, in fact, were settled nearby rail stations. For the factory in Logroño, only political reasons were taken into consideration. I should like to close by undertaking a comparative study of factories in Seville, Madrid and San Sebastian. There are a number of reasons to substantiate this choice: -The factory in Seville was historically speaking the first that was built and the most important one. -The factory in Madrid was the most important one administratively. This factory was the headquarters as well as being, after Seville, the one which provided a model for other factories. -The factory in San Sebastian is the biggest in the North of Spain. The analysis carried out are related to the volume of the buildings and the surface areas of the courtyards, the surface of the roofs, the permeability of the walls and the openings of the façade, the orientation and the sun exposure, the indoor spatial distribution and organization and evolution of the uses (formerly and currently) I observe that in most of these factories there has been a change in the use of the buildings, from industrial cultural purposes. These buildings can be considered as adaptable infrastructures based on a combination of architectural practicability, sustainability and functionality.

Non-mereological universalism

In this paper I develop a version of universalism that is non-mereological. Broadly speaking, non-mereological universalism is the thesis that for any arbitrary set of objects and times, there is a persisting object which, at each of those times, will be constituted by those of the objects that exist at that time. I consider two general versions of non-mereological universalism, one which takes basic simples to be enduring objects, and the other which takes simples to be instantaneous objects. This yields three versions of endurantism, of which I ultimately defend the version I call universalist endurantism. Universalist endurantism is the thesis that (i) for any arbitrary set S of instantaneous simples that exist at the same instant, there exists a fusion of the members of S, and (ii) for any arbitrary set S* of instantaneous fusions each of which exist at a different instant, there exists an enduring object O that is constituted by those fusions at those instants. Universalist endurantism is ‘non-mereological’ in that the relation that holds between instantaneous fusions and persisting objects is not the part/whole relation, but rather, is the relation of constitution, thus allowing that the persisting objects are three rather than four dimensional. I argue that universalist endurantism not only has the various benefits of mereological universalism in allowing vagueness to be explicated as semantic indeterminacy, but in addition allows the endurantist to hold that some properties are genuinely intrinsic and are exemplified simpliciter.

Autofiction as a fictional metaphorical self-translation:the case of Reinaldo Arenas' El color del verano

In the past thirty years, autofiction has been at the center of many literary studies (Alberca 2005/6, 2007; Colonna 1989, 2004; Gasparini 2004; Genette 1982), although only recently in Hispanic literary studies. Despite the many common characteristics with self-translation, no interdisciplinary perspective has ever been offered by academic researchers in Literary nor in Translation Studies. This article analyses how the Cuban author, Reinaldo Arenas, uses specific methods inherent to autofiction, such as nominal and personal identity exploitation, among others, to translate himself metaphorically into his novel El color del verano [The colour of summer]. Analysing this novel drawing on the theory of self-translation sheds light on the intrinsic and extraneous motives behind the writer’s decision to use this specific literary genre, as well as the benefits presented to the reader who gains access to the ‘interliminal space’ of the writer’s work as a whole.

A qualitative study of the impact of an educational intervention on older parents of adults with disabilities engaged in the phenomenon of future-care planning

This phenomenological study describes the impact of an educational intervention on the day-to-day experiences of older parent caregivers of adults with developmental disabilities who were engaged in the process of future-care planning. Qualitative strategies of individual and focus group interviewing were used with a purposive sample of older caregivers. Participants were members of an existing parent support group. Twenty-three caregivers representing 18 families were queried before and after the education program. The disabilities represented were mental retardation, cerebral palsy and autism. Parents whose children live at or away from home were included. The intervention was conducted on five Saturdays over a two month period; the duration of the study was five months. Findings used typical words of the respondents from their individual and focus group interviews to describe feelings, attitudes and experiences in making future-care plans. Data from verbatim transcriptions and researcher's field notes were coded, analyzed, sorted into themes, and subjected to interpretive analysis. Respondents showed a positive change in attitudes and actions after participating in the education program, regardless of their initial stage in care planning. Fears were replaced by hope and determination; hesitation and ineptitude by feelings of competence and confidence; and procrastination and delay by purposeful actions. Other key findings: use of a planning document greatly aided caregivers; barriers to planning were often intrinsic and amenable to education; residential plans were the most difficult aspect of planning; listening to the experiences of other parent caregivers was helpful; and making burial plans for their offspring was one aspect of planning parents wished to do themselves. ^

The Influence of Selected Antecedents of Frontline Employee's Perceptions of Service Recovery Performance

The purpose of this study is to determine the potential impact of selected organizational factors on boundary-spanning-role employees’ perceptions of service recovery performance. This study also aims to assess the impact of service recovery performance on the intention to leave the job and extrinsic job satisfaction. This study uses a sample of frontline employees in Belek, Antalya, Turkey. The empirical findings revealed that education, team work and role ambiguity as frontline job perceptions were found to exert positive influences on the service recovery performance, but, empowerment, reward, and organizational commitment were found to have negative effects on the service recovery performance.

The Influence of the Guatemalan Municipal Orchestra's Curriculum on the Social Relations of its Members

The purpose of this case study is to determine the influence of the curriculum used by the Guatemalan Municipal Orchestra (GMO) upon the social interactions of its members. Social interactions include relations with families, teachers, and music colleagues. To determine this influence, the researcher framed the study using three main components: the impact of music in the development of children’s social skills; the curricula forming educational processes; and the characteristics of the Venezuela musical program, El Sistema. These foundations are explored via the tenets of participatory literacy. The data collection included interviews, surveys, and observation of students, parents, teachers, and administrative personnel. Two primary themes emerged from the data analysis: the development of a sense of community and the presence of intrinsic and external motivators implicit in the GMO environment. The final analysis suggests that curricular practices in the GMO positively influenced the development of students’ social interactions.

A recipe for scavenging in vertebrates - the natural history of a behaviour

Despite its prevalence, the importance of scavenging to carnivores is difficult to ascertain in modern day forms and impossible to study directly in extinct species. Yet, there are certain intrinsic and environmental features of a species that push it towards a scavenging lifestyle. These can be thought of as some of the principal parameters in optimal foraging theory namely, encounter rate and handling time. We use these components to highlight the morphologies and environments that would have been conducive to scavenging over geological time by focusing on the dominant vertebrate groups of the land, sea and air. The result is a synthesis on the natural history of scavenging. The features that make up our qualitative scale of scavenging can be applied to any given species and allow us to judge the likely importance of this foraging behaviour.

Relatório de estágio

O presente relatório de estágio de qualificação profissional tem como objetivo refletir criticamente acerca do percurso de desenvolvimento profissional da mestranda durante os momentos de prática pedagógica, no âmbito das unidades curriculares de Prática Pedagógica Supervisionada na Educação Pré-Escolar e Ensino do 1.º CEB. Neste sentido, espelha competências desenvolvidas pela mestranda essenciais para a profissionalidade docente, suportadas por uma postura reflexiva, indagadora, crítica e investigativa, tornando-a capaz de tomar decisões adequadas ao contexto educativo e agir com intencionalidade pedagógica sabendo fazer, ser e estar. Neste sentido, o desenvolvimento dos saberes profissionais foram construídos em articulação com a metodologia de investigação-ação, que se processou numa espiral cíclica de observação, planificação, ação, reflexão e avaliação, tendo ênfase a reflexão pode ser intrínseca e implícita em todas as fases. Importa referir ainda que o desenvolvimento da prática pedagógica em díade de formação potenciou momentos de reflexão partilhada que contribuíram para a transformação de práticas. Realça-se que a elaboração deste relatório assumiu um papel fulcral na consciência do ser professor, uma vez que despoletou na mestranda uma reflexão crítica sobre as práticas e desafios delas decorrentes, contribuindo para a contínua construção de conceções e representações inerentes à identidade pessoal e profissional da futura docente.

Relatório de estágio de qualificação profissional (Fase intercalar do estágio)

Relatório EPE - Relatório de estágio em Educação Pré-Escolar: O presente relatório de estágio de qualificação profissional surge no âmbito da unidade curricular de Prática Pedagógica Supervisionada na Educação Pré- Escolar, por forma a evidenciar o desenvolvimento pessoal e profissional da mestranda ao longo da prática pedagógica. Neste sentido, a mestranda foi desenvolvendo um conjunto de competências, tendo em vista a construção dos seus saberes profissionais, atendendo a uma postura de pendor reflexiva e indagadora, capaz de tomar decisões adequadas de acordo com o contexto educativo onde está inserida, uma vez que o mesmo se carateriza por ser imprevisível. O desenvolvimento dos saberes profissionais foi possibilitado através da adoção da metodologia de investigação-ação, sendo que a mesma se processa numa espiral cíclica de observação, planificação, ação e reflexão, pelo que a reflexão é intrínseca e implícita em todas as fases. Efetivamente, foram várias as estratégias que fomentaram o desenvolvimento desta metodologia, nomeadamente: elaboração de planificações, realização de narrativas colaborativas, elaboração do diário de formação, construção dos guiões de préobservação, reestruturação do Projeto Curricular de Grupo e as reuniões realizadas com o supervisor institucional. Importa, ainda, referir que o desenvolvimento da prática pedagógica em díade de formação, potenciou momentos de reflexão partilhada que contribuíram para a transformação das práticas. A elaboração deste relatório assumiu um papel fulcral, uma vez que despoletou na mestranda uma reflexão crítica sobre as práticas, confluindo na identificação da evolução das suas competências pessoais e profissionais, bem como das dificuldades que ainda predominam, por forma a contorná-las futuramente.

Influência na qualidade final de metais retificados através da variação da velocidade de mergulho

A retificação, processo final de usinagem de uma peça, utiliza fluidos de corte com a finalidade de lubrificação, refrigeração e remoção de cavacos. No entanto, esses fluidos são extremamente agressivos com o meio. Com o avanço tecnológico a tendência mundial é produzir peças cada vez mais sofisticadas, com elevado grau de tolerância geométrica, dimensional, com bom acabamento superficial, com baixo custo e, principalmente, sem causar danos ao meio. Para tanto, ao processo de retificação está intrínseca a reciclagem do fluido de corte, que se destaca pelo seu custo. Através da variação da velocidade de avanço no processo de retificação cilíndrica externa do aço ABNT D6, racionalizando a aplicação de dois fluidos de corte e usando um rebolo superabrasivo de CBN (nitreto de boro cúbico) com ligante vitrificado, avaliaram-se os parâmetros de saída da força tangencial de corte, emissão acústica, rugosidade, circularidade, desgaste da ferramenta, tensão residual e a integridade superficial através da microscopia eletrônica de varredura (MEV) dos corpos-de-prova. Com a análise do desempenho do fluido, do rebolo e da velocidade de mergulho, encontraram-se as melhores condições de usinagem propiciando a diminuição do volume de fluido de corte e a diminuição do tempo de usinagem, sem prejudicar os parâmetros geométricos e dimensionais, o acabamento superficial e a integridade superficial dos componentes.

Attitudes towards risk in financial decision making

Doutoramento em Gestão

Transição de fase topológica e transporte eletrônica em grafenos e nanofitas zigzag grafeno tensionados

Tese (doutorado)—Universidade de Brasília, Instituto de Física, 2015.

Synthetic Triterpenoid Cyano Enone of Methyl Boswellate Activates Intrinsic, Extrinsic, and Endoplasmic Reticulum Stress Cell Death Pathways in Tumor Cell Lines

We explored the effect of a novel synthetic triterpenoid compound cyano enone of methyl boswellates (CEMB) on various prostate cancer and glioma cancer cell lines. CEMB displayed concentration-dependent cytotoxic activity with submicromolar lethal dose 50% (LD(50)) values in 10 of 10 tumor cell lines tested. CEMB-induced cytotoxicity is accompanied by activation of downstream effector caspases (caspases 3 and 7) and by upstream initiator caspases involved in both the extrinsic (caspase 8) and intrinsic (caspase 9) apoptotic pathways. By using short interfering RNAs (siRNA), we show evidence that knockdown of caspase 8, DR4, Apaf-1, and Bid impairs CEMB-induced cell death. Similar to other proapoptotic synthetic triterpenoid compounds, CEMB-induced apoptosis involved endoplasmic reticulum stress, as shown by partial rescue of tumor cells by siRNA-mediated knockdown of expression of genes involved in the unfolded protein response such as IRE1 alpha, PERK, and ATF6. Altogether, our results suggest that CEMB stimulates several apoptotic pathways in cancer cells, suggesting that this compound should be evaluated further as a potential agent for cancer therapy. Mol Cancer Ther; 10(9); 1635-43. (C)2011 AACR.