Use and reuse of SPE disks for the determination of pyrethroids in water by GC-ECD

Seven pyrethroids (bifenthrin, fenpropathrin, k-cyhalothrin, permethrin, a-cypermethrin, fenvalerate, and deltamethrin) were extracted from water using C18 solid-phase extraction disks, followed by gas chromatography with an electron capture detector (GC-ECD) analysis. The limits of detection in water samples ranged from 0.5 ng L-1 (fenpropathrin) to 110 ng L- 1 (permethrin), applying the calibration graph. The effects of different numbers of (re)utilizations of the same disks (up to four times with several concentrations) on the recoveries of the pyrethroids were considered. The recoveries were all between 70 and 120% after four utilizations of the same disk. There was no difference between these recoveries at a confidence level of 95%.

Melhoria da eficiência de amplificadores de potência para sinais RF com envolvente variável

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Electrónica e Telecomunicações

Extração e caracterização de extratos de Jatropha gossypiifolia L.: avaliação da sua atividade antimicrobiana e antioxidante

Trabalho Final de Mestrado para obtenção do grau de mestre em Engenharia Química e Biológica

Color and Luminescence stability of selected dental materials in vitro

To study luminescence, reflectance, and color stability of dental composites and ceramics. Materials and Methods: IPS e.max, IPS Classic, Gradia, and Sinfony materials were tested, both unpolished (as-cast) and polished specimens. Coffee, tea, red wine, and distilled water (control) were used as staining drinks. Disk-shaped specimens were soaked in the staining drinks for up to 5 days. Color was measured by a colorimeter. Fluorescence was recorded using a spectrofluorometer, in the front-face geometry. Time-resolved fluorescence spectra were recorded using a laser nanosecond spectrofluorometer. Results: The exposure of the examined dental materials to staining drinks caused changes in color of the composites and ceramics, with the polished specimens exhibiting significantly lower color changes as compared to unpolished specimens. Composites exhibited lower color stability as compared to ceramic materials. Water also caused perceptible color changes in most materials. The materials tested demonstrated significantly different initial luminescence intensities. Upon exposure to staining drinks, luminescence became weaker by up to 40%, dependent on the drink and the material. Time-resolved luminescence spectra exhibited some red shift of the emission band at longer times, with the lifetimes in the range of tens of nanoseconds. Conclusions: Unpolished specimens with a more developed surface have lower color stability. Specimens stored in water develop some changes in their visual appearance. The presently proposed methods are effective in evaluating the luminescence of dental materials. Luminescence needs to be tested in addition to color, as the two characteristics are uncorrelated. It is important to further improve the color and luminescence stability of dental materials.

Electrochemical and analytical investigation of passive films formed on stainless steels in alkaline media

Passive films were grown in potentiodynamic mode, by cyclic voltammetry on AISI 316 and AISI 304 stainless steels. The composition of these films was investigated by X-ray photoelectron spectroscopy (XPS). The electrochemical behaviour and the chemical composition of the passive films formed by cyclic voltammetry were compared to those of films grown under natural conditions (by immersion at open circuit potential, OCP) in alkaline solutions simulating concrete. The study included the effect of pH of the electrolyte and the effect of the presence of chloride ions. The XPS results revealed important changes in the passive film composition, which becomes enriched in chromium and depleted in magnetite as the pH decreases. On the other hand, the presence of chlorides promotes a more oxidised passive layer. The XPS results also showed relevant differences on the composition of the oxide layers for the films formed under cyclic voltammetry and/or under OCP.

Novel techniques for the design and practical realization of switched-capacitor circuits in deep-submicron CMOS technologies

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

A multiplying-by-two CMOS amplifier for high-speed ADCs based on parametric amplification

15th International Conference on Mixed Design of Integrated Circuits and Systems, pp. 177 – 180, Poznan, Polónia

New low-power 1.5-bit time-interleaved MDAC based on MOS capacitor amplification

15th IEEE International Conference on Electronics, Circuits and Systems, Malta

Spectral invariants of periodic nonautonomous discrete dynamical systems

For an interval map, the poles of the Artin-Mazur zeta function provide topological invariants which are closely connected to topological entropy. It is known that for a time-periodic nonautonomous dynamical system F with period p, the p-th power [zeta(F) (z)](p) of its zeta function is meromorphic in the unit disk. Unlike in the autonomous case, where the zeta function zeta(f)(z) only has poles in the unit disk, in the p-periodic nonautonomous case [zeta(F)(z)](p) may have zeros. In this paper we introduce the concept of spectral invariants of p-periodic nonautonomous discrete dynamical systems and study the role played by the zeros of [zeta(F)(z)](p) in this context. As we will see, these zeros play an important role in the spectral classification of these systems.

Estabilização dinâmica em patologia degenerativa da coluna lombar: estado da arte e contributo pessoal

Resumo Este trabalho encontra-se dividido em três capítulos distintos. No primeiro, é caracterizada a doença degenerativa lombar, demorando-se o autor na descrição pormenorizada das alterações anatómicas, biomecânicas, e bioquímicas inerentes à sua ocorrência. Segue-se a descrição da evolução das diferentes formas de terapêutica, enumerando as que de forma clássica mais frequentemente são utilizadas (cirúrgicas e não cirúrgicas). No segundo capítulo, são referidos os mais recentes avanços tecnológicos nesta área, mencionando, nas suas vertentes biomecânicas, clínicas e terapêuticas, as particularidades das estabilizações dinâmicas interespinhosas e pediculares, bem como da artroplastia de disco. Após esta longa introdução, inicia-se o terceiro capítulo no qual se apresenta um estudo prospectivo da avaliação clínica, funcional, imagiológica e da variação da densidade mineral óssea vertebral em 20 doentes com patologia degenerativa, tratados com sistemas de estabilização dinâmica semi-rígida interespinhosa, e seguidos durante dois anos. Do estudo realizado conclui-se que os sistemas referidos são eficazes clínica e funcionalmente no tratamento de doentes com doença degenerativa lombar. Mais ainda, estes instrumentais proporcionam um aumento da altura do disco confirmado na incidência radiográfica de perfil no nível instrumentado. Constatámos ainda que a densidade mineral óssea vertebral dos doentes intervencionados, avaliada com sistema DXA, não demonstra diferenças com significância estatística ao longo do tempo, omparativamente à determinada em idêntica população mas sem qualquer patologia lombar. Acresce que se obteve uma correlação entre a funcionalidade física e a BMD radial, com significância estatística crescente nas duas medições realizadas. Abstract This study is divided in three different chapters. In the first one the author describes the anatomical, biomechanical and biochemical changes that go along with degenerative lumbar spine disease. The therapeutically possibilities are mentioned, mainly with the classic fusion and decompression as well as the non surgical options. Then, in the second chapter, the author describes, from the biomechanical, clinical and therapeutically point of view, the new techniques of dynamic stabilization, interspinous and pedicular systems, as well as disc replacement. After this introduction, in the third chapter a prospective clinical, functional, imagiologic and vertebral bone mineral density variation study is presented. Twenty patients with degenerative lumbar spine disease are selected, and operated with a semi rigid interspinous system device, and followed for a two year period. The author concludes that the interspinous semi rigid systems were clinically and functionally effective in lumbar degenerative patients. It was also founded that the disc height at the implant segment level increased after surgery. Bone density was assessed with a DXA system device. As far as vertebral bone density is concerned, the author found no differences what so ever inside the group during the study, or to an identical control group without any lumbar pathology. The correlation study between the BMD and physical function showed that there was only significant statistically data in radial BMD measurement, and this happened with growing correlation from year 2006 to 2007.

Burrows-wheeler transform in secondary memory

Master’s Thesis in Computer Engineering

Parametric analog signal amplification applied to nanoscale cmos wireless digital transceivers

Thesis presented in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the subject of Electrical and Computer Engineering by the Universidade Nova de Lisboa,Faculdade de Ciências e Tecnologia

Integração modular em visualizadores médicos e aposição da marcação CE do Dispositivo Médico

Neste documento ´e feita a descrição detalhada da integração modular de um script no software OsiriX. O objectivo deste script ´e determinar o diâmetro central da artéria aorta a partir de uma Tomografia Computorizada. Para tal são abordados conceitos relacionados com a temática do processamento de imagem digital, tecnologias associadas, e.g., a norma DICOM e desenvolvimento de software. Como estudo preliminar, são analisados diversos visualizadores de imagens médica, utilizados para investigação ou mesmo comercializados. Foram realizadas duas implementações distintas do plugin. A primeira versão do plugin faz a invocação do script de processamento usando o ficheiro de estudo armazenado em disco; a segunda versão faz a passagem de dados através de um bloco de memória partilhada e utiliza o framework Java Native Interface. Por fim, é demonstrado todo o processo de aposição da Marcação CE de um dispositivo médico de classe IIa e obtenção da declaração de conformidade por parte de um Organismo Notificado. Utilizaram-se os Sistemas Operativos Mac OS X e Linux e as linguagens de programação Java, Objective-C e Python.

Clonal types and antimicrobial resistance profiles of methicillin-resistant Staphylococcus aureus isolates from hospitals in south Brazil

In the present study were evaluated the DNA macrorestriction profile and SCCmec types for nine multi-resistant MRSA selected. Also antimicrobial susceptibility testing by disk diffusion method was evaluated for 68 MRSA isolates against 12 antimicrobial agents. The isolates were recovered from blood culture collected from hospitalized patients in three hospitals of Porto Alegre, Brazil. PFGE and PCR for mecA and SCCmec I, II, III, IV types genes were done on selected nine isolates with susceptibility only to vancomycin, teicoplanin and linezolid. Two clone profiles, with five subtypes, were demonstrated among multi-resistant MRSA analyzed. Eight isolates showed harbor SCCmec type III and one isolate was not typeable. The knowledge of SCCmec type, clone and antimicrobial profiles among S. aureus is essential mainly to prevention and control of dissemination of the antimicrobial resistance.

Epidemiological characterization, antimicrobial resistance and virulence mechanisms of human and animal streptococci

Dissertação para obtenção do Grau de Doutor em Biologia