Raman-forbidden mode and oxygen ordering in Bi2Sr2-xLaxCuO6+gamma single crystals annealed in oxygen

A Raman-forbidden phonon mode at about 840 cm(-1) is observed popularly on the surface of pun and La-doped Bi2Sr2-xLaxCuO6+y (0 less than or equal to x less than or equal to 0.8) single crystals annealed in oxygen. A remarkable excitation dependence of this additional line is found. Based on the properties of the structure of the Bi-O layer with excess oxygen atoms and the similarity in the appearance of the Raman-forbidden modes between RBa2Cu3Ox (R = Y, Nd, Gd, Pr) and Bi2Sr2-xLaxCuO6+y systems, we attribute the manifestation of this additional line to the ordering of the interstitial oxygen in the Bi-O layers. Our results provide Raman evidences for confirming that the ordering of the movable oxygen may exist universally in high-temperature superconductors.

DELINEATION OF DEFECTS IN SIMOX STRUCTURES USING A CHEMICAL ETCHING TECHNIQUE

Residual defects in the overlayer of fully annealed SIMOX material have been studied by means of a chemical etching technique. The etching procedure has been calibrated and an optimum recipe is reported. Observations using optical microscopy and transmission electron microscopy have been used to quantify the defect densities and good agreement between the two techniques has been established, confirming that the optimised chemical etching process can be used with confidence to determine the dislocation density for values < 10(7) cm-2.

Structural ordering and interface morphology in symmetrically strained (GaIn)As/Ga(PAs) superlattices grown on off-oriented GaAs(100)

In this work we investigate the structural properties of symmetrically strained (GaIn)As/GaAs/Ga(PAs)/GaAs superlattices by means of x-ray diffraction, reciprocal-space mapping, and x-ray reflectivity. The multilayers were grown by metalorganic vapor-phase epitaxy on (001) GaAs substrates intentionally off-oriented towards one of the nearest [110] directions. High-resolution triple-crystal reciprocal-space maps recorded for different azimuth angles in the vicinity of the (004) Bragg diffraction clearly show a double periodicity of the x-ray peak intensity that can be ascribed to a lateral and a vertical periodicity occurring parallel and perpendicular to the growth surface. Moreover, from the intensity modulation of the satellite peaks, a lateral-strain gradient within the epilayer unit cell is found, varying from a tensile to a compressive strain. Thus, the substrate off-orientation promotes a lateral modulation of the layer thickness (ordered interface roughness) and of the lattice strain, giving rise to laterally ordered macrosteps. In this respect, contour maps of the specular reflected beam in the vicinity of the (000) reciprocal lattice point were recorded in order to inspect the vertical and lateral interface roughness correlation, A semiquantitative analysis of our results shows that the interface morphology and roughness is greatly influenced by the off-orientation angle and the lateral strain distribution. Two mean spatial wavelengths can be determined, one corresponding exactly to the macrostep periodicity and the other indicating a further interface waviness along the macrosteps. The same spatial periodicities were found on the surface by atomic-force-microscopy images confirming the x-ray results and revealing a strong vertical correlation of the interfaces up to the outer surface.

High quality CeO2 film grown on Si(111) substrate by using low energy dual ion beam deposition technology

By using the mass-analyzed low energy dual ion beam deposition technique, a high quality epitaxial, insulating cerium dioxide thin film with a thickness of about 2000 Angstrom, has been grown on a silicon (111) substrate. The component species, cerium and oxygen, are homogeneous in depth, and have the correct stoichiometry for CeO2. X-ray double-crystal diffraction shows that the full width at half maximum of the (222) and (111) peaks of the film are less than 23 and 32 s, respectively, confirming that the film is a perfect single crystal. (C) 1995 American Institute of Physics.

1-Gb/s zero-pole cancellation CMOS transimpedance amplifier for Gigabit Ethernet applications

A zero-pole cancellation transimpedance amplifier (TIA) has been realized in 0.35 μm RF CMOS tech nology for Gigabit Ethernet applications. The TIA exploits a zero-pole cancellation configuration to isolate the input parasitic capacitance including photodiode capacitance from bandwidth deterioration. Simulation results show that the proposed TIA has a bandwidth of 1.9 GHz and a transimpedance gain of 65 dB·Ω for 1.5 pF photodiode capaci tance, with a gain-bandwidth product of 3.4 THz·Ω. Even with 2 pF photodiode capacitance, the bandwidth exhibits a decline of only 300 MHz, confirming the mechanism of the zero-pole cancellation configuration. The input resis tance is 50 Ω, and the average input noise current spectral density is 9.7 pA/(Hz)~(1/2). Testing results shows that the eye diagram at 1 Gb/s is wide open. The chip dissipates 17 mW under a single 3.3 V supply.

Deformation behaviour of electrodeposited nanocrystalline Ni with broad grain size distribution

In the present work, nanocrystalline Ni (nc-Ni) with a broad grain size distribution (BGSD) of 5-120 nm and an average grain size of 27.2 nm was prepared. The BGSD nc-Ni sample shows a similar strength and good ductility in comparison with electrodeposited nc-Ni with a narrow grain size distribution. The intracrystalline dislocation network was observed in the post-deformed microstructure confirming the conventional intracrystalline dislocation sliding mechanism in BGSD nc-Ni. The uniaxial tensile loading-unloading-loading deformation shows BGSD nc-Ni has the capability to store dislocations in the grain interior, which is very limited compared with that of coarse grained metals. For BGSD nc-Ni, the strain rate sensitivity of flow stress m enhances with decreasing strain rate. At the strain rate of 5 x 10(-6) s(-1), m was estimated to be 0.055. At the corresponding strain rate, the enhanced ductility along with the decreased strength was achievable, indicating activation of other deformation mechanisms, e. g. grain boundary sliding or diffusion.

人载脂蛋白APOA5的克隆表达纯化及相互作用蛋白研究

人类的载脂蛋白A5（apolipoprotein A5，APOA5）是一个新近发现的载脂蛋白家族成员。它在血浆中的含量比其他载脂蛋白低1-2个数量级，但能显著影响血浆三酰甘油水平，对血脂代谢具有重要意义，可以作为降血脂药物治疗中一个强有力的潜在靶标。 由于APOA5在血浆中含量低，直接从血浆中分离纯化很困难，国内一直没有报道简易可靠的纯化方法。为进一步研究APOA5的生物学特性，探讨其与TG代谢中的其它关键成分之间的相互关系，揭示其在脂类代谢相关疾病中的重要地位，必须有大量的蛋白和抗体用于基础研究。因此本研究首先利用基因工程技术，诱导表达纯化APOA5蛋白，免疫动物制备多克隆抗体，为进一步研究人肝脏细胞中APOA5的相互作用蛋白，研究APOA5蛋白在肝脏细胞中的功能奠定基础。 为了深入研究APOA5在肝脏中如何行使功能，我们采用细菌双杂交技术寻找与APOA5相互作用的蛋白因子。并采用Pull-down技术，免疫荧光及免疫共沉淀技术进一步确证其在体外和体内的相互作用关系，为进一步阐明APOA5在体内的生理功能提供了新的线索。 第一部分 APOA5基因的克隆、原核表达、纯化及其多克隆抗体的制备 本研究首先应用基因克隆技术，从人肝癌细胞系SMMC-7721的cDNA中扩增出1.1 kb的ApoA5基因全长序列。然后将其克隆至表达载体pThioHisD，构建原核表达载体pTH-APOA5。该重组质粒转化至大肠杆菌 BL21（DE3），成功实现人APOA5融合蛋白在大肠杆菌中的表达。经发酵得到高效表达的融合蛋白。 融合蛋白在 IPGT 诱导下以包涵体的形式大量表达。利用融合蛋白上的一段组氨酸序列，用镍离子亲和柱进行纯化和复性后，获得较高纯度的人APOA5融合蛋白。利用该融合蛋白免疫新西兰大耳白兔，获得了高效价的兔抗人APOA5多克隆抗体，Western Blot结果显示此多克隆抗体与APOA5特异性结合。 第二部分 细菌双杂交筛选与APOA5相互作用的蛋白 本实验首先构建了pBT-APOA5重组质粒，经双酶切、PCR和测序鉴定证明重组诱饵质粒构建成功，并进行了表达、自激活鉴定。Western Blot鉴定证实报告菌株中表达了分子量为 68 kD左右的重组融合蛋白，与预测的分子量APOA5（41 kD）/lamda cI （27 kD）一致。自激活实验证明诱饵蛋白不能单独激活报告基因，可用于筛选人肝脏cDNA文库。经过双重抗性筛选和回复筛选，分离出10个阳性克隆。对结果进行生物信息学分析，得到7个与APOA5相互作用的蛋白，其中BI1为细胞凋亡调节因子；ATP6、CYTB、ND2、COX-1为线粒体表达蛋白； ALB、TTR为血清蛋白。 第三部分 APOA5与BI1相互作用的确证 首先构建了BI1的原核表达载体pGEX-5X-3-BI1，利用Pull-down实验检测了APOA5与BI1在体外具有相互作用。然后构建了BI1的真核表达载体pCDNA3.1-HA-BI1和APOA5的真核表达载体pCDNA3.1-APOA5，并验证其表达。通过免疫荧光细胞内共定位研究发现，靶蛋白APOA5主要分布于胞浆，与BI1在HEK293细胞有共定位，即APOA5与BI1存在相互作用的可能。最后利用免疫共沉淀手段，在HEK293细胞中确证了靶蛋白APOA5与BI1在体内的相互作用。 上述研究结果，为深入研究APOA5在体内的生物学功能提供了新的思路。 Apolipoprotein A5 (APOA5) is a newly discovered protein belongs to apolipoprotein family. APOA5’s concentration is 1-2 orders of magnitude lower than other apolipoproteins in the circulation. APOA5 significantly affected plasma triglyceride levels, which is important on lipid metabolism. APOA5 has strong potential to be used as a hypolipidemic drug target. Large amount of APOA5 protein and antibodies are needed in basic research, such as biological characteristics study of the APOA5, its relationship with other key components in TG metabolism, its role played in Lipid metabolism-related diseases. Due to its low concentration in plasma, separation and purification of APOA5 from the plasma is very difficult. Until now no report on simple and reliable method for purification has been published in China. In this study, we firstly got APOA5 recombinant protein using genetic engineering technology. The purified recombinant protein was used to immunize rabbits to get antiserum. It is important for further study of the APOA5 protein-interacting protein. And it lays the foundation for studing APOA5 function in liver. In order to study APOA5 function in liver, we used bacterial two-hybrid technology to find the APOA5 protein interactor. Pull-down, immunofluorescence and immunoprecipitation techniques were used to further confirm the interaction between APOA5 with its interactor in vitro and in vivo. All of these stdudies provided new clues on its physiological functions in vivo. Part I: Cloning, prokaryotic expression, purification and polyclonal antibody preparation of APOA5 First of all, we amplified APOA5 CDS sequence from the human hepatoma cell line SMMC-7721, and subcloned into Expression vector pThioHisD, and got the recombinants named pTH-APOA5. The plasmid was transformed to BL21 (DE3). E. coli BL21(DE3) cells bearing the pTH-APOA5 plasmid were cultured and APOA5 protein synthesis was induced by the addition of IPTG. Recombinant protein was expression in the form of inclusion. Inclusion bodies were dissolved in phosphate-buffered saline containing 8 M urea and 40 mM imidazole, then applied to a Ni2+ affinity column, and were eluted in a buffer containing 4 M urea and 200 mM imidazole. Fractions containing the APOA5 protein were pooled and dialyzed against buffer containing phosphate-buffered saline. Antiserum to recombinant human APOA5 was generated by immuning rabbit. Western Blot showed that this antiserum specific binding with APOA5. Part II Two-hybrid system screening protein interactions with the APOA5 The coding sequence of human APOA5 was amplified using synthetic oligonucleotide primers from pTH-APOA5 vector and was subcloned into the pBT plasmidc to yield pBT-APOA5 vector. DNA sequencing was performed to verify that no unwanted mutations occurred during the process of plasmid vector construction. We verified recombinant protein expression and tested self-activation by pBT-APOA5 prior to screening. Western Blot verified inducing a 68 kD band, consistent with the predicted molecular weight (APOA5 41 kD, lamda cI 27 kD). pBT-APOA5 can be used for screening human liver cDNA library because it can not self-activation. Totally 10 positive clones were isolated. The nucleotide sequence of the positive clones were determined and compared to NCBI nucleotide sequence databases. We got 7 protein which interact with APOA5, included BI1(Apoptosis regulator); ATP6, CYTB, ND2, COX-1(Mitochondrial protein) and ALB, TTR(Serum protein). Part III Confirming of interaction between APOA5 with BI1 pGEX-5X-3-BI1 vector was subcloned at first. Pull-down experiments were used to detect the interaction between APOA5 with BI1 in vitro. Later, pCDNA3.1-HA-BI1 and pCDNA3.1-APOA5 were subcloned. Through immunofluorescence co-localization study, we found APOA5 mainly distributed in the cytoplasm. APOA5 is co-localization with BI1 in HEK293 cells. Finally, we verified interaction between APOA5 with BI1 in vivo through immunoprecipitation.

alpha-decay half-lives and Q(alpha) values of superheavy nuclei

The alpha-decay half-lives of recently synthesized superheavy nuclei (SHN) are investigated by employing a unified fission model (UFM) where a new method to calculate the assault frequency of alpha emission is used. The excellent agreement with the experimental data indicates the UFM is a useful tool to investigate these alpha decays. It is found that the alpha-decay half-lives become more and more insensitive to the Q(alpha) values as the atomic number increases on the whole, which is favorable for us to predict the half-lives of SHN. In addition, a formula is proposed to compute the Q(alpha) values for the nuclei with Z >= 92 and N >= 140 with a good accuracy, according to which the long-lived SHN should be neutron rich. Several weeks ago, two isotopes of a new element with atomic number Z = 117 were synthesized and their alpha-decay chains have been observed. The Q(alpha) formula is found to work well for these nuclei, confirming its predictive power. The experimental half-lives are well reproduced by employing the UFM with the experimental Q(alpha) values. This fact that the experimental half-lives are compatible with experimental Q(alpha) values supports the synthesis of a new element 117 and the experimental measurements to a certain extent.

Ammonia-treated activated carbon as support of a Ru-Ba catalyst for ammonia synthesis

Ammonia-treated activated carbon has been studied as a support of Ru-Ba catalyst for ammonia synthesis. It is shown that the introduction of nitrogen leads to a decrease of ammonia synthesis activity for the catalysts with a low Ba/Ru molar ratio, while no significant changes are obtained for the catalysts with a high Ba/Ru molar ratio, confirming that electronegative impurities suppress the activity in ammonia synthesis and consume part of the promoters.

坡面侵蚀过程定量研究进展

坡面是土壤侵蚀最基本的地貌单元 ,定量研究坡面侵蚀能为研究土壤侵蚀规律、确定坡面重点侵蚀部位、建立土壤侵蚀预报模型提供科学依据。总结了溅蚀、片蚀、细沟侵蚀、浅沟侵蚀的定量研究进展 ,简述了土壤侵蚀模型的研究进展 ,对目前的其它研究方法进行了评述

Mass transfer kinetics of yttrium(III) using a constant interfacial cell with laminar flow. Part II. Extraction with Cyanex 272

The yttrium(III) extraction kinetics and mechanism with bis-(2,4,4-trimethyl-pentyl) phosphinic acid (Cyanex 272, HA) dissolved in heptane have been investigated by constant interfacial cell with laminar flow. The data has been analyzed in terms of pseudo-first order constants. Studies on the effects of stirring rate, temperature, acidity in aqueous phase, and extractant concentration on the extraction rate show that the extraction regime is dependent on the extraction conditions. The plot of interfacial area on the rate has shown a linear relationship. This fact together with the strong surface activity of Cyanex 272 at heptane-water interfaces has made the interface the most probable location for the chemical reactions. The forward, reverse rate equations and extraction rate constant for the yttrium extraction with Cyanex 272 have been obtained under the experimental conditions. The rate-determining step has been also predicted from interfacial reaction models. The predictions have been found to be in good agreement with the rate equations obtained from experimental data, confirming the basic assumption that the chemical reaction is located at the liquid-liquid interface.

Mass spectrometric evidence for the generation of benzyne from benzoyl peroxide in thermolysis

Benzoyl peroxide gave rise to benzoic acid (at m/z 122) in its electron impact mass spectrum, and its perdeuterated counterpart produced perdeuterobenzoic acid, C6D5CO2D, at m/z 128 under the same conditions, An intramolecular hydrogen abstraction is proposed for the formation of benzoic acid from the peroxide in thermolysis. As a result of this reaction, benzyne would be generated simultaneously. Anthracene was employed to trap any of the reactive intermediate benzyne. Collision-induced dissociation of the ion of m/z 254 from the mixture of benzoyl peroxide and anthracene indicated that triptycene was obtained by the trapping reaction, therefore confirming that benzyne is generated from benzoyl peroxide in thermolysis.

Assessing genetic identity of sporophytic offspring of the brown alga Undaria pinnatifida derived from mono-crossing of gametophyte clones by use of amplified fragment length polymorphism and microsatellite markers

The haploid stage of gametophytes of the subtidal brown alga Undaria pinnatifida can be vegetatively propagated under favorable conditions. This unique characteristic makes it possible to establish independent gametophyte cell lines that are zoospore-derived. Sporophytic offspring can be generated through hybridizing the male and female gametophytes, which are derived from different cell lines. Accumulated experiences in this and other species in Laminariales demonstrated the applicability of this novel way to breed desired strains for open-sea cultivation. Sporophytic offspring originated from mono-crossing of male and female gametophyte clones were shown to have similar morphological characteristics under identical ambient conditions. However, there has been no report to relate this similarity on molecular levels. In this report, amplified fragment length polymorphism (AFLP) and microsatellite markers were used to analyze the genetic identity of sporophytic offspring of U. pinnatifida originated from two mono-crossing lines (M1 and M2), two self-breeding lines (S1 and S2) and one wild population (W). Totally 318 AFLP loci were revealed by use of 11 primer sets, of which 4.7%, 0.3%, 17.9%, 16.4% and 36.5% were polymorphic in M1, M2, S1, S2 and W, respectively. The pairwise genetic identity among the individuals of the same line was assessed. It was shown that offspring from mono-crossing lines had a higher degree of identity (95.6-100%) than self-breeding lines (87.7-98.4%) and the wild population (81.5-92.1%). Analysis by use of six microsatellite loci also revealed a higher genetic identity among individuals of the mono-crossing line, further confirming the results of AFLP analysis. Results from this investigation support, on molecular levels, the novel way to produce and maintain strains in U. pinnatifida by use of different gametophyte cell lines.

Triploid and tetraploid Zhikong scallop, Chlamys farreri Jones et Preston, produced by inhibiting polar body I

Triploid scallops are valuable for aquaculture because of their enlarged adductor muscle, and tetraploids are important for the commercial production of triploids. We tested tetraploid induction in the zhikong scallop by inhibiting polar body I in newly fertilized eggs. The ploidy of resultant embryos was determined by chromosome counting at 2- to 4-cell stage and by flow cytometry thereafter. Embryos from the control groups were mostly diploids (79%), along with some aneuploids. Embryos from the treated groups were 13% diploids, 18% triploids, 26% tetraploids, 13% pentaploids, and 36% aneuploids. Tetraploids, pentaploids, and most aneuploids suffered heavy mortality during the first week and became undetectable among the larvae at day 14. Five tetraploids (2%) were found among a sample of 267 spat from one of the replicates, and none was detected at day 450. The adductor muscle of triploid scallops was 44% heavier (P < .01) than that of diploids, confirming the value of the triploid technology in this species.

Origin and Pathway of Equatorial 13 degrees C Water in the Pacific Identified by a Simulated Passive Tracer and Its Adjoint

The origin and pathway of the thermostad water in the eastern equatorial Pacific Ocean, often referred to as the equatorial 13 degrees C Water, are investigated using a simulated passive tracer and its adjoint, based on circulation estimates of a global general circulation model. Results demonstrate that the source region of the 13 degrees C Water lies well outside the tropics. In the South Pacific, some 13 degrees C Water is formed northeast of New Zealand, confirming an earlier hypothesis on the water's origin. The South Pacific origin of the 13 degrees C Water is also related to the formation of the Eastern Subtropical Mode Water (ESTMW) and the Sub-Antarctic Mode Water (SAMW). The portion of the ESTMW and SAMW that eventually enters the density range of the 13 degrees C Water (25.8 < sigma(theta) < 26.6 kg m(-3)) does so largely by mixing. Water formed in the subtropics enters the equatorial region predominantly through the western boundary, while its interior transport is relatively small. The fresher North Pacific ESTMW and Central Mode Water (CMW) are also important sources of the 13 degrees C Water. The ratio of the southern versus the northern origins of the water mass is about 2 to 1 and tends to increase with time elapsed from its origin. Of the total volume of initially tracer-tagged water in the eastern equatorial Pacific, approximately 47.5% originates from depths above sigma(theta) = 25.8 kg m(-3) and 34.6% from depths below sigma(theta) = 26.6 kg m(-3), indicative of a dramatic impact of mixing on the route of subtropical water to becoming the 13 degrees C Water. Still only a small portion of the water formed in the subtropics reaches the equatorial region, because most of the water is trapped and recirculates in the subtropical gyre.