Control design for multicast-aware class-based networks

The expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.

A biosignal embedded system for physiological computing

Thesis submitted in the fulfilment of the requirements for the Degree of Master in Electronic and Telecomunications Engineering

Energy efficient scheduling for cluster-tree wireless sensor networks with time-bounded data flows: application to IEEE 802.15.4/ZigBee

Cluster scheduling and collision avoidance are crucial issues in large-scale cluster-tree Wireless Sensor Networks (WSNs). The paper presents a methodology that provides a Time Division Cluster Scheduling (TDCS) mechanism based on the cyclic extension of RCPS/TC (Resource Constrained Project Scheduling with Temporal Constraints) problem for a cluster-tree WSN, assuming bounded communication errors. The objective is to meet all end-to-end deadlines of a predefined set of time-bounded data flows while minimizing the energy consumption of the nodes by setting the TDCS period as long as possible. Sinceeach cluster is active only once during the period, the end-to-end delay of a given flow may span over several periods when there are the flows with opposite direction. The scheduling tool enables system designers to efficiently configure all required parameters of the IEEE 802.15.4/ZigBee beaconenabled cluster-tree WSNs in the network design time. The performance evaluation of thescheduling tool shows that the problems with dozens of nodes can be solved while using optimal solvers.

Environmental indicator frameworks to design and assess environmental monitoring programs

Impact Assessment and Project Appraisal, vol. 22, n.1, March 2004, p. 47–62

Environmental performance policy indicators for the public sector: The case of the defence sector

Journal of Environmental Management, nº 82 p. 410–432

Planeamento estratégico através da implementação da metodologia Balanced Scorecard numa empresa de construção

Atualmente, existe uma constante necessidade de inovação tecnológica e organizacional das empresas, face às exigências do mercado e ao aumento constante da competitividade. No contexto da economia atual, e para contrariar a falta de investimento dos últimos anos, as empresas concentram-se no desenvolvimento de negócios bem estruturados e organizados, que satisfaçam as exigências de cada cliente. Revela-se, assim, muito importante a avaliação de desempenho para o alcance do seu sucesso, permitindo alinhar as atividades operacionais com a visão organizacional, fomentar a comunicação da estratégia e gerir o seu desempenho. É neste contexto que ganha importância o Balanced Scorecard, um instrumento que permite avaliar o desempenho organizacional, funcionando também como uma ferramenta de gestão. Tem, portanto, como principais objetivos definir claramente uma estratégia, definir objetivos, indicadores e medidas estratégicas, planear e estabelecer metas e melhorar continuamente os resultados obtidos. Esta ferramenta analisa a organização em quatro diferentes perspetivas: financeira, clientes, processos internos e apendizagem e crescimento. Cada uma delas deve estrututrar os seus próprios objetivos, indicadores, metas e iniciativas de forma a contribuir para o desenvolvimento da estratégia da organização e avaliar o seu desempenho. O desafio deste relatório é adaptar esta metodologia durante a realização de um estágio curricular na empresa Bysteel, que tem por base a implementação de um processo de gestão estratégica nas suas empreitadas, através do Balanced Scorecard. Este planemamento surge como um dos principais requisitos para uma gestão eficaz de custos e de tempo planeados para cada empreitada da Bysteel. Este processo torna-se bastante complexo dado que cada obra apresenta diferentes particularidades. A implementação desta metodologia numa empresa desta dimensão é um fator muito motivador, tornando-se ainda mais interessante pelo facto de se tratar de uma implementação numa nova vertente.

An automatic voice pleasantness classification system based on prosodic and acoustic patterns of voice preference

In the last few years the number of systems and devices that use voice based interaction has grown significantly. For a continued use of these systems the interface must be reliable and pleasant in order to provide an optimal user experience. However there are currently very few studies that try to evaluate how good is a voice when the application is a speech based interface. In this paper we present a new automatic voice pleasantness classification system based on prosodic and acoustic patterns of voice preference. Our study is based on a multi-language database composed by female voices. In the objective performance evaluation the system achieved a 7.3% error rate.

Les consortiums d'établissements offrant des services aux personnes ayant subi un traumatisme craniocérébral : étude de cas et proposition d’une hiérarchisation des dimensions de leur performance

Au Québec, des réseaux ont été implantés afin de contrer le manque d’intégration des services offerts aux personnes vivant avec un traumatisme cranio-cérébral (TCC). Toutefois, l’évaluation de leur performance est actuellement limitée par l’absence de description et de conceptualisation de leur performance. Le but de cette thèse est de poser les bases préliminaires d’un processus d’évaluation de la performance des réseaux TCC. Nos objectifs sont de 1) décrire les organisations, la nature et la qualité des liens ainsi que la configuration d’un réseau TCC; 2) connaître les perceptions des constituants du réseau quant aux forces, faiblesses, opportunités et menaces propres à cette forme organisationnelle; 3) documenter et comparer les perceptions de répondants provenant de divers types d’organisations quant à l’importance de 16 dimensions du concept de performance pour l’évaluation des réseaux TCC; 4) réconcilier les perceptions différentes afin de proposer une hiérarchisation consensuelle des dimensions de la performance. En utilisant la méthode de l’analyse du réseau social, nous avons décrit un réseau de petite taille, modérément dense et essentiellement organisé autour de quatre organisations fortement centralisées. Les constituants ont décrit leur réseau comme présentant autant de forces que de faiblesses. La majorité des enjeux rapportés étaient relatifs à l’Adaptation du réseau à son environnement et au Maintien des Valeurs. Par ailleurs, les représentants des 46 organisations membre d’un réseau TCC ont perçu les dimensions de la performance relatives à l’Atteinte des buts comme étant plus importantes que celles relatives aux Processus. La Capacité d’attirer la clientèle, la Continuité et la Capacité de s’adapter pour répondre aux besoins des clients étaient les trois dimensions les plus importantes, tandis que la Capacité de s’adapter aux exigences et aux tendances et la Quantité de soins et de services étaient les moins importants. Les groupes TRIAGE ont permis aux constituants de s’entendre sur l’importance accordée à chaque dimension et d’uniformiser leurs différentes perspectives. Bien que plusieurs étapes demeurent à franchir pour actualiser le processus d’évaluation de la performance des réseaux TCC québécois, nos travaux permettent de poser des bases scientifiques solides qui optimisent la pertinence et l’appropriation des résultats pour les étapes ultérieures.

Les dimensions négligées de l'évaluation de la performance : les valeurs et la qualité de vie au travail

L’objet de cette thèse est l’élaboration d’un modèle logique de mesure du maintien des valeurs, ainsi que son opérationnalisation afin d’entreprendre l’évaluation de la performance des systèmes de santé. Le maintien des valeurs est l’une des quatre fonctions de la théorie de l’action sociale de T.Parsons permettant d’analyser les systèmes d’action. Les autres fonctions sont l’adaptation, la production et l’atteinte des buts. Cette théorie est la base du modèle EGIPSS (évaluation globale et intégrée de la performance des systèmes de santé), dans lequel cette thèse s’insère. La fonction étudiée correspond, dans l’oeuvre de T.Parsons, au sous-système culturel. Elle renvoie à l’intangible, soit à l’univers symbolique par lequel l’action prend son sens et les fonctions du système s’articulent. Le modèle logique de mesure du maintien des valeurs est structuré autour de deux concepts principaux, les valeurs individuelles et organisationnelles et la qualité de vie au travail. À travers les valeurs individuelles et organisationnelles, nous mesurons la hiérarchie et l’intensité des valeurs, ainsi que le niveau de concordance interindividuelle et le degré de congruence entre les valeurs individuelles et organisationnelles. La qualité de vie au travail est composée de plusieurs concepts permettant d’analyser et d’évaluer l’environnement de travail, le climat organisationnel, la satisfaction au travail, les réactions comportementales et l’état de santé des employés. La mesure de ces différents aspects a donné lieu à la conception de trois questionnaires et de trente indicateurs. Ma thèse présente, donc, chacun des concepts sélectionnés et leurs articulations, ainsi que les outils de mesure qui ont été construits afin d’évaluer la dimension du maintien des valeurs. Enfin, nous exposons un exemple d’opérationnalisation de ce modèle de mesure appliqué à deux hôpitaux dans la province du Mato Grosso du Sud au Brésil. Cette thèse se conclut par une réflexion sur l’utilisation de l’évaluation comme outil de gestion soutenant l’amélioration de la performance et l’imputabilité. Ce projet comportait un double enjeu. Tout d’abord, la conceptualisation de la dimension du maintien des valeurs à partir d’une littérature abondante, mais manquant d’intégration théorique, puis la création d’outils de mesure permettant de saisir autant les aspects objectifs que subjectifs des valeurs et de la qualité de vie au travail. En effet, on trouve dans la littérature de nombreuses disciplines et de multiples courants théoriques tels que la psychologie industrielle et organisationnelle, la sociologie, les sciences infirmières, les théories sur le comportement organisationnel, la théorie des organisations, qui ont conçu des modèles pour analyser et comprendre les perceptions, les attitudes et les comportements humains dans les organisations. Ainsi, l’intérêt scientifique de ce projet découle de la création d’un modèle dynamique et intégrateur offrant une synthèse des différents champs théoriques abordant la question de l’interaction entre les perceptions individuelles et collectives au travail, les conditions objectives de travail et leurs influences sur les attitudes et les comportements au travail. D’autre part, ce projet revêt un intérêt opérationnel puisqu’il vise à fournir aux décideurs du système de santé des connaissances et données concernant un aspect de la performance fortement négligé par la plupart des modèles internationaux d’évaluation de la performance.

Implanter et pérenniser un système de gestion de la performance des services infirmiers

Travail dirigé présenté à la Faculté des sciences infirmières en vue de l’obtention du grade de Maître ès sciences (M.Sc.) en sciences infirmières option administration en sciences infirmières

A study on the performance of flexible pavements on mature soil subgrades

The country has witnessed tremendous increase in the vehicle population and increased axle loading pattern during the last decade, leaving its road network overstressed and leading to premature failure. The type of deterioration present in the pavement should be considered for determining whether it has a functional or structural deficiency, so that appropriate overlay type and design can be developed. Structural failure arises from the conditions that adversely affect the load carrying capability of the pavement structure. Inadequate thickness, cracking, distortion and disintegration cause structural deficiency. Functional deficiency arises when the pavement does not provide a smooth riding surface and comfort to the user. This can be due to poor surface friction and texture, hydro planning and splash from wheel path, rutting and excess surface distortion such as potholes, corrugation, faulting, blow up, settlement, heaves etc. Functional condition determines the level of service provided by the facility to its users at a particular time and also the Vehicle Operating Costs (VOC), thus influencing the national economy. Prediction of the pavement deterioration is helpful to assess the remaining effective service life (RSL) of the pavement structure on the basis of reduction in performance levels, and apply various alternative designs and rehabilitation strategies with a long range funding requirement for pavement preservation. In addition, they can predict the impact of treatment on the condition of the sections. The infrastructure prediction models can thus be classified into four groups, namely primary response models, structural performance models, functional performance models and damage models. The factors affecting the deterioration of the roads are very complex in nature and vary from place to place. Hence there is need to have a thorough study of the deterioration mechanism under varied climatic zones and soil conditions before arriving at a definite strategy of road improvement. Realizing the need for a detailed study involving all types of roads in the state with varying traffic and soil conditions, the present study has been attempted. This study attempts to identify the parameters that affect the performance of roads and to develop performance models suitable to Kerala conditions. A critical review of the various factors that contribute to the pavement performance has been presented based on the data collected from selected road stretches and also from five corporations of Kerala. These roads represent the urban conditions as well as National Highways, State Highways and Major District Roads in the sub urban and rural conditions. This research work is a pursuit towards a study of the road condition of Kerala with respect to varying soil, traffic and climatic conditions, periodic performance evaluation of selected roads of representative types and development of distress prediction models for roads of Kerala. In order to achieve this aim, the study is focused into 2 parts. The first part deals with the study of the pavement condition and subgrade soil properties of urban roads distributed in 5 Corporations of Kerala; namely Thiruvananthapuram, Kollam, Kochi, Thrissur and Kozhikode. From selected 44 roads, 68 homogeneous sections were studied. The data collected on the functional and structural condition of the surface include pavement distress in terms of cracks, potholes, rutting, raveling and pothole patching. The structural strength of the pavement was measured as rebound deflection using Benkelman Beam deflection studies. In order to collect the details of the pavement layers and find out the subgrade soil properties, trial pits were dug and the in-situ field density was found using the Sand Replacement Method. Laboratory investigations were carried out to find out the subgrade soil properties, soil classification, Atterberg limits, Optimum Moisture Content, Field Moisture Content and 4 days soaked CBR. The relative compaction in the field was also determined. The traffic details were also collected by conducting traffic volume count survey and axle load survey. From the data thus collected, the strength of the pavement was calculated which is a function of the layer coefficient and thickness and is represented as Structural Number (SN). This was further related to the CBR value of the soil and the Modified Structural Number (MSN) was found out. The condition of the pavement was represented in terms of the Pavement Condition Index (PCI) which is a function of the distress of the surface at the time of the investigation and calculated in the present study using deduct value method developed by U S Army Corps of Engineers. The influence of subgrade soil type and pavement condition on the relationship between MSN and rebound deflection was studied using appropriate plots for predominant types of soil and for classified value of Pavement Condition Index. The relationship will be helpful for practicing engineers to design the overlay thickness required for the pavement, without conducting the BBD test. Regression analysis using SPSS was done with various trials to find out the best fit relationship between the rebound deflection and CBR, and other soil properties for Gravel, Sand, Silt & Clay fractions. The second part of the study deals with periodic performance evaluation of selected road stretches representing National Highway (NH), State Highway (SH) and Major District Road (MDR), located in different geographical conditions and with varying traffic. 8 road sections divided into 15 homogeneous sections were selected for the study and 6 sets of continuous periodic data were collected. The periodic data collected include the functional and structural condition in terms of distress (pothole, pothole patch, cracks, rutting and raveling), skid resistance using a portable skid resistance pendulum, surface unevenness using Bump Integrator, texture depth using sand patch method and rebound deflection using Benkelman Beam. Baseline data of the study stretches were collected as one time data. Pavement history was obtained as secondary data. Pavement drainage characteristics were collected in terms of camber or cross slope using camber board (slope meter) for the carriage way and shoulders, availability of longitudinal side drain, presence of valley, terrain condition, soil moisture content, water table data, High Flood Level, rainfall data, land use and cross slope of the adjoining land. These data were used for finding out the drainage condition of the study stretches. Traffic studies were conducted, including classified volume count and axle load studies. From the field data thus collected, the progression of each parameter was plotted for all the study roads; and validated for their accuracy. Structural Number (SN) and Modified Structural Number (MSN) were calculated for the study stretches. Progression of the deflection, distress, unevenness, skid resistance and macro texture of the study roads were evaluated. Since the deterioration of the pavement is a complex phenomena contributed by all the above factors, pavement deterioration models were developed as non linear regression models, using SPSS with the periodic data collected for all the above road stretches. General models were developed for cracking progression, raveling progression, pothole progression and roughness progression using SPSS. A model for construction quality was also developed. Calibration of HDM–4 pavement deterioration models for local conditions was done using the data for Cracking, Raveling, Pothole and Roughness. Validation was done using the data collected in 2013. The application of HDM-4 to compare different maintenance and rehabilitation options were studied considering the deterioration parameters like cracking, pothole and raveling. The alternatives considered for analysis were base alternative with crack sealing and patching, overlay with 40 mm BC using ordinary bitumen, overlay with 40 mm BC using Natural Rubber Modified Bitumen and an overlay of Ultra Thin White Topping. Economic analysis of these options was done considering the Life Cycle Cost (LCC). The average speed that can be obtained by applying these options were also compared. The results were in favour of Ultra Thin White Topping over flexible pavements. Hence, Design Charts were also plotted for estimation of maximum wheel load stresses for different slab thickness under different soil conditions. The design charts showed the maximum stress for a particular slab thickness and different soil conditions incorporating different k values. These charts can be handy for a design engineer. Fuzzy rule based models developed for site specific conditions were compared with regression models developed using SPSS. The Riding Comfort Index (RCI) was calculated and correlated with unevenness to develop a relationship. Relationships were developed between Skid Number and Macro Texture of the pavement. The effort made through this research work will be helpful to highway engineers in understanding the behaviour of flexible pavements in Kerala conditions and for arriving at suitable maintenance and rehabilitation strategies. Key Words: Flexible Pavements – Performance Evaluation – Urban Roads – NH – SH and other roads – Performance Models – Deflection – Riding Comfort Index – Skid Resistance – Texture Depth – Unevenness – Ultra Thin White Topping

El trabajo en equipo en el Proceso Administrativo y de Compras en OPL Carga de Bucaramanga

El proceso administrativo y de compras de OPL Carga tiene algunas falencias entre ellas: fallas en la Comunicación entre el personal operativo, no se realizan llamadas internas usando con frecuencia el email, produciendo la saturación de solicitudes las cuales terminan sin ser resueltas en cuanto a roles se refiere, no hay enfoque de procesos en vista que no se tiene claras las tareas de cada cargo, adicionalmente no hay claridad en los subprocesos, perjudicando el proceso con el aumento de costos, pérdida de tiempo, las responsabilidades de los funcionario no todas las veces se ejecutan en el tiempo asignado, el liderazgo compartido presenta ambigüedades. Objetivos: Definir el trabajo en equipo en el proceso administrativo y de compras en OPL carga de Bucaramanga. La investigación que a realizar es de tipo descriptivo, busca descubrir las falencias o características que permiten diseñar y desarrollar un modelo de solución para los problemas del equipo de OPL Carga S.A.S. Materiales y métodos: La investigación efectuada es de tipo descriptivo, el objetivo es definir el modelo del trabajo en equipo y describir las falencias en el proceso administrativo y de compras en OPL carga de Bucaramanga, que permitan obtener un diagnóstico integral que conlleve a la implementación de estrategias de solución. Resultados: Se identificaron las falencias en los siguientes aspectos: Variable comunicación, rendimiento, destrezas complementarias, propósito significativo y meta específicas de los funcionarios en OPL carga sección administrativa. Conclusiones: El modelo de trabajo en equipo que OPL aplica es jerárquico, en el que se ofrece estabilidad, seguridad, se toman decisiones en forma piramidal, mediante la planeación de tareas, la colaboración, igualdad y respeto por los miembros, trabajando en pro de la solución de problemas. Se construyó un plano conceptual que permitió exponer la interpretación que la estudiante tiene de las teorías, investigaciones y antecedentes válidos para la comprensión del problema investigado. Área comunicacional: Coordinar acciones tendientes para que los funcionarios respondan a tiempo los emails atenientes a su trabajo. Área condiciones de trabajo: Clarificar y diseñar las reglas de comportamiento al interior de los equipos de trabajo que redunden en el mejoramiento del mismo y la búsqueda de soluciones oportunas. Área metas específicas: Procurar mediante auditorías el cumplimiento de las metas y objetivos propuestos por cada equipo de trabajo.

Option pricing in market models driven by telegraph processes with jumps

Esta tesis está dividida en dos partes: en la primera parte se presentan y estudian los procesos telegráficos, los procesos de Poisson con compensador telegráfico y los procesos telegráficos con saltos. El estudio presentado en esta primera parte incluye el cálculo de las distribuciones de cada proceso, las medias y varianzas, así como las funciones generadoras de momentos entre otras propiedades. Utilizando estas propiedades en la segunda parte se estudian los modelos de valoración de opciones basados en procesos telegráficos con saltos. En esta parte se da una descripción de cómo calcular las medidas neutrales al riesgo, se encuentra la condición de no arbitraje en este tipo de modelos y por último se calcula el precio de las opciones Europeas de compra y venta.

Avaliação do Impacto da Aplicação do SIADAP na Administração Pública : estudo de uma Autarquia

As grandes mudanças organizacionais existentes na administração pública exigem cada vez mais uma reavaliação constante do formato de gestão, obrigando a uma missão consistente e a uma visão contínua. Nesta abordagem, o presente estudo visa demonstrar a importância que a avaliação de desempenho representa no seio da administração local. É objetivo central deste trabalho, avaliar o impacto da aplicação da avaliação de desempenho na Administração Local - Sistema Integrado de Avaliação de Desempenho na Administração Pública (SIADAP), bem como as políticas e práticas de Recursos Humanos aplicadas: a formação e a comunicação. Pretende-se, ainda, perceber até que ponto estes fatores contribuem para a compreensão do SIADAP. Para tal, utilizamos uma metodologia qualitativa para analisar e comparar as perspetivas dos avaliados e avaliadores de forma a perceber diferenças em relação aos diversos perfis funcionais. Os resultados apontam no sentido de que a monitorização dos objetivos e competências durante o processo de avaliação de desempenho influencia o modo como os avaliados classificam o sistema de Avaliação de Desempenho (SIADAP). Permitiu conhecer, sob o ponto de vista dos avaliadores, a sua perceção sobre o sistema como instrumento na promoção de uma cultura de mérito. Por fim, possibilitou recolher a opinião de avaliados e avaliadores sobre as quatro grandezas em estudo (subjetividade, importância, avaliação e satisfação), o que contribuiu para uma melhor compreensão desta temática, bem como da sua influência no desenvolvimento das pessoas e das organizações.

A avaliação do desempenho na Administração Pública

O SIADAP, Sistema de Avaliação do Desempenho na Administração Pública, surge como um novo paradigma de avaliação do desempenho, estratégico para a gestão das organizações do sector público, porque tem sido um enorme desafio para os serviços que o têm implementado, ou para os que ainda não o conseguiram fazer. Este trabalho pretende avaliar as opiniões de avaliadores e avaliados, relativamente ao sistema e à sua implementação numa autarquia. A abordagem metodológica seguida para a sua realização, foi uma análise qualitativa. O processo seguido foi o de realização de entrevistas gravadas com a finalidade de recolher a informação necessária ao desenvolvimento da dissertação. Foram estabelecidos os seguintes objetivos de trabalho: Apresentar e caracterizar o SIADAP, conhecer e analisar as opiniões dos avaliados e dos avaliadores em relação ao processo SIADAP, no que respeita ao seu conhecimento e experiência dos sistemas de avaliação, à importância atribuída e dificuldades na aplicação do atual processo de Avaliação do Desempenho dos Trabalhadores da Administração Pública, o papel da avaliação do desempenho enquanto ferramenta de gestão de recursos humanos, e instrumento de apoio na promoção de uma cultura de mérito. Para avaliadores e avaliados, o sistema apresenta uma avaliação globalmente positiva e com oportunidades de melhoria, embora existam pontos fracos e constrangimentos que não podem ser ignorados.