DC MICROGRID STABILIZATION THROUGH FUZZY CONTROL OF INTERLEAVED, HETEROGENEOUS STORAGE ELEMENTS

As microgrid power systems gain prevalence and renewable energy comprises greater and greater portions of distributed generation, energy storage becomes important to offset the higher variance of renewable energy sources and maximize their usefulness. One of the emerging techniques is to utilize a combination of lead-acid batteries and ultracapacitors to provide both short and long-term stabilization to microgrid systems. The different energy and power characteristics of batteries and ultracapacitors imply that they ought to be utilized in different ways. Traditional linear controls can use these energy storage systems to stabilize a power grid, but cannot effect more complex interactions. This research explores a fuzzy logic approach to microgrid stabilization. The ability of a fuzzy logic controller to regulate a dc bus in the presence of source and load fluctuations, in a manner comparable to traditional linear control systems, is explored and demonstrated. Furthermore, the expanded capabilities (such as storage balancing, self-protection, and battery optimization) of a fuzzy logic system over a traditional linear control system are shown. System simulation results are presented and validated through hardware-based experiments. These experiments confirm the capabilities of the fuzzy logic control system to regulate bus voltage, balance storage elements, optimize battery usage, and effect self-protection.

6th International Immunoglobulin Symposium: poster presentations

The posters presented at the 6th International Immunoglobulin Symposium covered a wide range of fields and included both basic science and clinical research. From the abstracts accepted for poster presentation, 12 abstracts were selected for oral presentations in three parallel sessions on immunodeficiencies, autoimmunity and basic research. The immunodeficiency presentations dealt with novel, rare class-switch recombination (CSR) deficiencies, attenuation of adverse events following IVIg treatment, association of immunoglobulin (Ig)G trough levels and protection against acute infection in patients with X-linked agammaglobulinaemia (XLA) and common variable immunodeficiency (CVID), and the reduction of class-switched memory B cells in patients with specific antibody deficiency (SAD). The impact of intravenous immunoglobulin on fetal alloimmune thrombocytopenia, pregnancy and postpartum-related relapses in multiple sclerosis and refractory myositis, as well as experiences with subcutaneous immunoglobulin in patients with multi-focal motor neuropathy, were the topics presented in the autoimmunity session. The interaction of dendritic cell (DC)-SIGN and alpha2,6-sialylated IgG Fc and its impact on human DCs, the enrichment of sialylated IgG in plasma-derived IgG, as wells as prion surveillance and monitoring of anti-measles titres in immunoglobulin products, were covered in the basic science session. In summary, the presentations illustrated the breadth of immunoglobulin therapy usage and highlighted the progress that is being made in diverse areas of basic and clinical research, extending our understanding of the mechanisms of immunoglobulin action and contributing to improved patient care.

Antiplatelets versus Anticoagulants for the Treatment of Cervical Artery Dissection: Bayesian Meta-Analysis

OBJECTIVE To compare the effects of antiplatelets and anticoagulants on stroke and death in patients with acute cervical artery dissection. DESIGN Systematic review with Bayesian meta-analysis. DATA SOURCES The reviewers searched MEDLINE and EMBASE from inception to November 2012, checked reference lists, and contacted authors. STUDY SELECTION Studies were eligible if they were randomised, quasi-randomised or observational comparisons of antiplatelets and anticoagulants in patients with cervical artery dissection. DATA EXTRACTION Data were extracted by one reviewer and checked by another. Bayesian techniques were used to appropriately account for studies with scarce event data and imbalances in the size of comparison groups. DATA SYNTHESIS Thirty-seven studies (1991 patients) were included. We found no randomised trial. The primary analysis revealed a large treatment effect in favour of antiplatelets for preventing the primary composite outcome of ischaemic stroke, intracranial haemorrhage or death within the first 3 months after treatment initiation (relative risk 0.32, 95% credibility interval 0.12 to 0.63), while the degree of between-study heterogeneity was moderate (τ(2) = 0.18). In an analysis restricted to studies of higher methodological quality, the possible advantage of antiplatelets over anticoagulants was less obvious than in the main analysis (relative risk 0.73, 95% credibility interval 0.17 to 2.30). CONCLUSION In view of these results and the safety advantages, easier usage and lower cost of antiplatelets, we conclude that antiplatelets should be given precedence over anticoagulants as a first line treatment in patients with cervical artery dissection unless results of an adequately powered randomised trial suggest the opposite.

An ethnographic study of home remedy use for African-American children

Background and significance. The use of herbs and other remedies by adult and elderly African-Americans has been documented. However, little is understood regarding the use of herbs for African-American children. The purpose of this study was to document and describe the historical and present day uses of herbal and other remedies, specifically for the health and illness of African-American children. This information will provide health care providers with a better understanding of their African-American patients. This information may also contribute to the emerging appreciation of indigenous uses of phytotherapeutics. ^ Methods. A focused ethnographic approach was used to describe the cultural context, including the beliefs, values, customs, and behaviors of a particular culture. The use of intensive fieldwork, including participant observation, audiotaped formal interviews, photographs, and specimen collection of plants helped to describe herb use in this population. Information on the growing, harvesting, preparation, and storage of these plant remedies, as well as the amount and dosage of these compounds was collected in a typology. Detailed information was gathered to discern how, when, and under what conditions these remedies were used and their expected results. Further data collection focused on the history of herbal use, and explanations for how and why informants thought the herbs work. ^ Setting and participants. The setting for this study was in East Texas and field work extended over the period of one year. Thirty African-Americans, age 38 to 98, were interviewed for the study. The African-American population in this area has been relatively stable, with roots dating back prior to the reconstruction period, which allowed excellent historical information. Informants were chosen by a nominated sampling technique starting with two key informants knowledgeable about the use of home remedies for children. ^ Findings. The findings of this study suggest that African-American children in East Texas have a long history of receiving herbs and home remedies for health promotion and illness. Data further suggests that there is a strong connection between spirituality and the health beliefs and practices of this community. This spiritual component underlies the accuracy of oral recall for remedies that have been used over many generations and the use of natural folk remedies. A typology of the herbal remedies was developed with folk and Latin name, herb place of origin, known scientific properties, and informant folk usage and dosage information. ^

Analysis of the LIFO inventory valuation method during the onset of IFRS

I propose that the Last in, First out (LIFO) inventory valuation method needs to be reevaluated. I will evaluate the impact of the LIFO method on earnings of publically traded companies with a LIFO reserve over the past 10 years. I will begin my proposal with the history of how the LIFO method became an acceptable valuation method and discuss the significance of LIFO within the accounting profession Next I will provide a description of LIFO, the First in, First out (FIFO), and the weighted average inventory valuation methods and explore the differences among each. More specifically, I will explore the arguments for and against the use of the LIFO method and the potential shift towards financial standards that do not allow LIFO (a standard adopted and influenced by the International Financial Accounting Standards Board). Data will be collected from Compustat for publicly traded companies (with a LIFO Reserve) for the past 10 years. I will document which firms use LIFO, analyze trends relating to LIFO usage and LIFO reserves (the difference in the cost of inventory between using LIFO and FIFO), and evaluate the effect on earnings. The purpose of this research is to evaluate the accuracy of LIFO in portraying earnings and to see how much tax has gone uncollected over the years because of the use of LIFO. Moreover, I will provide an opinion as to whether U.S. GAAP should adopt a standard similar to IFRS and ban the LIFO method.

The effect of obesity on mammography utilization in African American women

Breast cancer continues to reign as a common cause of death for women in the United States, claiming the lives of more than an estimated 40,000 women in 2009 alone (Ries et al., 2009). A mammogram, an x-ray of the breast, can aid in early detection of breast cancer and thus more successful treatment. Screening patterns indicate African American women are less likely to utilize mammography technology when compared to their Caucasian counterparts. Additionally, the obesity epidemic in the United States remains a major public health problem. Obesity trends indicate that African American women are likely to be more obese when compared to Caucasian women. Pischon, Nöthlings, & Boeing (2008) concluded there was sufficient evidence linking breast cancer and obesity. Many researchers have identified obesity as a risk factor for breast cancer. As African American women are disproportionately burdened by both breast cancer mortality and obesity, more extensive research is needed to gain more knowledge about their association. The purpose of this study was to identify the role obesity plays in lessening an African American woman’s usage of mammography technology. Data from the 2005 National Health Interview Study were analyzed using SPSS to evaluate the relationship between body mass index (BMI) and mammography utilization in the two aforementioned populations.^ After excluding respondents from the sample who did not meet the set criteria, there were 17,666 women remaining. Of the 17,666 women, 6,156 (34.8%) had a healthy weight, 6,024 (34.1%) were overweight, and 4,285 (24.3%) were obese. About 70% of the sample population reported having had a mammogram in the last two years. Another 27.6% of women reported not receiving a mammogram within this same two year time frame. Within ethnic categories, the majority of the sample was Caucasian (64.2%) while only 15.1% of the sample was African American. The relationship between mammography usage and body mass index was not statistically significant within any body mass index categories. When analyzing the relationship between mammography usage and BMI, adjusting for ethnicity, there was also no significant difference between obese African American and obese Caucasian women. The study did find significant relationships between mammography usage and body mass index when adjusting for cancer risk OR = .79 (95% CI .72 - .85), and marital status OR = 1.18 (95% CI 1.05 - 1.34). Due to insignificant findings, there was no evidence to support the hypothesis regarding differences in mammography usage based on weight or ethnicity. Mammography screening differences based on ethnicity are widely cited. Unfortunately it is still unclear exactly where these differences lie. Obesity has been widely documented in the literature as a risk factor for many chronic diseases, including certain forms of cancer. Understanding the relationship between screening behaviors and weight can assist in the development of health promotion programs aimed at high risk groups. In order to change screening behavior and reduce mortality from breast cancer, more research is needed to identify similarities within low screening populations.^

Assessing the impact of electronic health record technology adoption on hospital labor efficiency

Information technology (IT) in the hospital organization is fast becoming a key asset, particularly in light of recent reform legislation in the United States calling for expanding the role of IT in our health care system. Future payment reductions to hospitals included in current health reform are based on expected improvements in hospital operating efficiency. Since over half of hospital expenses are for labor, improved efficiency in use of labor resources can be critical in meeting this challenge. Policy makers have touted the value of IT investments to improve efficiency in response to payment reductions. ^ This study was the first to directly examine the relationship between electronic health record (EHR) technology and staffing efficiency in hospitals. As the hospital has a myriad of outputs for inpatient and outpatient care, efficiency was measured using an industry standard performance metric – full time equivalent employees per adjusted occupied bed (FTE/AOB). Three hypotheses were tested in this study.^ To operationalize EHR technology adoption, we developed three constructs to model adoption, each of which was tested by separate hypotheses. The first hypothesis that a larger number of EHR applications used by a hospital would be associated with greater staffing efficiency (or lower values of FTE/AOB) was not accepted. Association between staffing efficiency and specific EHR applications was the second hypothesis tested and accepted with some applications showing significant impacts on observed values for FTE/AOB. Finally, the hypothesis that the longer an EHR application was used in a hospital would be associated with greater labor efficiency was not accepted as the model showed few statistically significant relationships to FTE/AOB performance. Generally, there does not appear a strong relationship between EHR usage and improved labor efficiency in hospitals.^ While returns on investment from EHR usage may not come from labor efficiencies, they may be better sought using measures of quality, contribution to an efficient and effective local health care system, and improved customer satisfaction through greater patient throughput.^

Nosotros y los de extranjis. La identidad como programa : homenaje a Esteban Echeverría en el bicentenario de su nacimiento (1805-2005)

Con su obra y con su acción Esteban Echeverría marca un hito en el desarrollo y afianzamiento de la identidad político social y cultural argentina. Formula expresamente un programa de construcción identitaria y toda su obra se encuentra teñida por la voluntad de crear una literatura propia y original, en una lengua castellana enriquecida por el uso americano, con temas provenientes de la realidad del país y con la finalidad de contribuir, trascendiendo lo estético, al engrandecimiento de su patria. Subyace en cada página de Echeverría la necesidad de crear una sociedad democrática que continúe el pensamiento anticolonial de la Revolución de Mayo. Su “Apología del matambre" condensa ejemplarmente estas características.

Análisis de los modelos de comportamiento de vigas de hormigón armado reforzadas a cortante con polímeros armados con fibras (frp). Validación y calibración experimental

Los polímeros armados con fibras (FRP) se utilizan en refuerzos de estructuras de hormigón debido sobre todo a sus excelentes propiedades mecánicas, su resistencia a la corrosión y a su ligereza que se traduce en facilidad y ahorro en el transporte, puesta en obra y aplicación, la cual se realiza de forma muy rápida, con pocos operarios y utilizando medios auxiliares ligeros, minimizándose las interrupciones del uso de la estructura y las molestias a los usuarios. Las razones presentadas anteriormente, han despertado un gran inter´es por parte de diferentes grupos de investigación a nivel mundial y que actualmente se encuentran desarrollando nuevas técnicas de aplicación y métodos de cálculo. Sin embargo, las investigaciones realizadas hasta la fecha, muestran un procedimiento bien definido y aceptado en lo referente al cálculo a flexión, lo cual no ocurre con el refuerzo a cortante y aunque se ha demostrado que el refuerzo con FRP es un sistema eficaz para incrementar la capacidad ´ultima frente a esfuerzos cortantes, también se pone de manifiesto la necesidad de más estudios experimentales y teóricos para avanzar en el entendimiento de los mecanismos involucrados para este tipo de refuerzo y establecer un procedimiento de diseño apropiado que maximice las excelentes propiedades de este material. Los modelos que explican el comportamiento del refuerzo a cortante de elementos de hormigón armado son complejos y sin transposición directa a fórmulas ingenieriles. Las normas actualmente en vigor, generalmente, establecen empíricamente la capacidad cortante como la suma de las capacidades del hormigón y el refuerzo transversal de acero. Cuando un elemento es reforzado externamente con FRP, los modelos son evidentemente aun más complejos. Las guías y recomendaciones existentes proponen calcular la capacidad del elemento añadiendo la resistencia aportada por el refuerzo externo de FRP a la ya dada por el hormigón y acero transversal. Sin embargo, la idoneidad de este acercamiento es cuestionable puesto que no tiene en cuenta una posible interacción entre refuerzos. Con base en lo anterior se da origen al tema objeto de este trabajo, el cual está orientado al estudio a cortante de elementos de hormigón armado (HA), reforzados externamente con material compuesto de tejido unidireccional de fibra de carbono y resina epoxi. Inicialmente se hace una completa revisión del estado actual del conocimiento de la resistencia a cortante en elementos de hormigón armado con y sin refuerzo externo de FRP, prestando especial atención en los mecanismos actuantes estudiados hasta la fecha. La bibliografía consultada ha sido exhaustiva y actualizada lo que ha permitido el estudio de los modelos propuestos más importantes, tanto para la descripción del fenómeno de adherencia entre hormigón-FRP como de la valoración del aporte al cortante total hecho por el FRP, a través de sendas bases de datos de ensayos de pull-out y de vigas de hormigón armado ensayadas a cortante. Con base en todo lo anterior, se expusieron los mecanismos actuantes en el aporte a cortante hecho por el FRP en elementos de hormigón armado y la forma como las principales guías de cálculo existentes hasta la fecha los abordan. De igual forma se define un modelo de resistencia de esfuerzos para el FRP y se proponen dos modelos para el cálculo de las tensiones o deformaciones efectivas, de los cuales uno esta basado en el modelo de adherencia propuesto por Oller (2005) y el otro en una regresión multivariante para los mecanismos expuestos. Como complemento del estudio de los trabajos encontrados en la literatura, se lleva acabo un programa experimental que, además de aportar más registros a la exigua base de datos existentes, aporte mayor luz a los puntos que se consideran están deficientemente resueltos. Dentro de este programa se realizaron 32 ensayos sobre 16 vigas de 4.5 m de longitud (dos ensayos por viga), reforzadas a cortante con tejido unidireccional de CFRP. Finalmente, estos estudios han permitido proponer modificaciones a las formulaciones existentes en los códigos y guías en vigor. Abstract Its excellent mechanical properties, as well as its corrosion resistance and light weight, which make it easy to apply and inexpensive to ship to the worksite, are the basis of the extended use of fiber reinforced polymer (FRP) as external strengthening for structures. FRP strengthening is a rapid operation calling for only limited labor and lightweight ancillary equipment, all of which minimizes both the interruption of facility usage and user inconvenience. These advantages have aroused considerable interest in civil engineering science and technology and have led to countless applications the world over. Research studies on the shear strength of FRP-strengthened members have been much fewer in number and more controversial than the research on flexural strengthening, for which a more or less standardized and generally accepted procedure has been established. The research conducted and a host of applications around the world have shown that FRP strengthening is an effective technique for raising ultimate shear strength, but it has also revealed a need for further experimental and theoretical research to advance in the understanding of the mechanisms involved and establish suitable design procedures that optimize the excellent properties of this material The models that explain reinforced concrete (RC) shear strength behavior are complex and cannot be directly transposed to engineering formulas. The standards presently in place generally establish shear capacity empirically as the sum of the capacities of the concrete and the passive reinforcement. When members are externally strengthened with FRP, the models are obviously even more complex. The existing guides and recommendations propose calculating capacity by adding the external strength provided by the FRP to the contributions of the concrete and passive reinforcement. The suitability of this approach is questionable, however, because it fails to consider the interaction between passive reinforcement and external strengthening. The subject of this work is based in above, which is focused on externally shear strengthening for reinforced concrete members with unidirectional carbon fiber sheets bonded with epoxy resin. v Initially a thorough literature review on shear of reinforced concrete beams with and without external FRP strengthening was performed, paying special attention to the acting mechanisms studied to date, which allowed the study of the most important models both to describe the bond phenomenon as well as calculating the FRP shear contribution, through separate databases of pull-out tests and shear tests on reinforced concrete beams externally strengthened with FRP. Based on above, they were exposed the acting mechanisms in a FRP shear strengthening on reinforced concrete beams and how guidelines deal the topic. The same way, it is defined a FRP stress strength model and two more models are proposed for calculating the effective stress, one of these is based on the Oller (2005) bond model and another one is the data best fit, taking into account most of the acting mechanisms. To complement the theoretical part we develop an experimental program that, in addition to providing more records to the meager existing database provide greater understanding to the points considered poorly resolved. The test program included 32 tests of 16 beams (2 per beam) of 4.5 m long, shear strengthened with FRP, externally. Finally, modifications to the existing codes and guidelines are proposed.

Improving target localization accuracy of wireless visual sensor networks

This paper discusses the target localization problem of wireless visual sensor networks. Specifically, each node with a low-resolution camera extracts multiple feature points to represent the target at the sensor node level. A statistical method of merging the position information of different sensor nodes to select the most correlated feature point pair at the base station is presented. This method releases the influence of the accuracy of target extraction on the accuracy of target localization in universal coordinate system. Simulations show that, compared with other relative approach, our proposed method can generate more desirable target localization's accuracy, and it has a better trade-off between camera node usage and localization accuracy.

Inner-Hair Cells Parameterized-Hardware Implementation for Personalized Auditory Nerve Stimulation

In this paper the hardware implementation of an inner hair cell model is presented. Main features of the design are the use of Meddis’ transduction structure and the methodology for Design with Reusability. Which allows future migration to new hardware and design refinements for speech processing and custom-made hearing aids

Negative ternary set-sharing

The Set-Sharing domain has been widely used to infer at compiletime interesting properties of logic programs such as occurs-check reduction, automatic parallelization, and flnite-tree analysis. However, performing abstract uniflcation in this domain requires a closure operation that increases the number of sharing groups exponentially. Much attention has been given to mitigating this key inefflciency in this otherwise very useful domain. In this paper we present a novel approach to Set-Sharing: we define a new representation that leverages the complement (or negative) sharing relationships of the original sharing set, without loss of accuracy. Intuitively, given an abstract state sh\> over the finite set of variables of interest V, its negative representation is p(V) \ shy. Using this encoding during analysis dramatically reduces the number of elements that need to be represented in the abstract states and during abstract uniflcation as the cardinality of the original set grows toward 2 . To further compress the number of elements, we express the set-sharing relationships through a set of ternary strings that compacts the representation by eliminating redundancies among the sharing sets. Our experiments show that our approach can compress the number of relationships, reducing signiflcantly the memory usage and running time of all abstract operations, including abstract uniflcation.

Metodología para medir beneficios de la ciudad Puerto de Valparaíso Chile, con relación a la actividad marítima portuaria

La presente tesis propone una metodología para medir variables de impacto socio económico en la ciudad Puerto de Valparaíso, como una alternativa que permite evaluar la asignación del uso y explotación del borde costero. La ciudad de Valparaíso se formó al alero de la actividad marítima portuaria, en sus comienzos esta actividad fue el motor de desarrollo económico de la ciudad, sus habitantes mantenían una alta dependencia de ésta actividad, formando una identidad y cultura portuaria. Con la decadencia de la actividad portuaria, producto principalmente a la construcción del canal de Panamá y a la modernización de los buques de transporte aumentando su distancia franqueable1, la ciudad fue dejando su dependencia de esta actividad. Hoy en día casi la totalidad del borde costero de la ciudad está asignado a las actividades portuarias con escasa participación laboral de los habitantes de la ciudad y una alta demanda urbana por el uso del borde costero. Por otra parte, la ciudad ha presentado en la última década altos niveles de cesantía, cuestionándose la verdadera utilidad de mantener un puerto en la ciudad. La investigación de la tesis permitió dimensionar la cantidad de firmas y actividades económicas que se desarrollaban en torno a la actividad marítima portuaria en la ciudad, cuantificando los empleos que éstas otorgaban a la ciudad, los niveles de remuneraciones, los tributos a la municipalidad de la ciudad, el aporte al comercio local, entre otros. Descubriéndose hallazgos que permiten reflexionar sobre la importancia del la actividad en el desarrollo económico actual y futuro de la ciudad. También los antecedentes obtenidos permiten contribuir a la evaluación de proyectos alternativos para el uso y explotación del borde costero. La metodología utilizada también puede ser adaptada para medir los beneficios de otras ciudades puertos en el mundo. Los resultados obtenidos fueron expuestos a las autoridades gubernamentales locales, presentados en seminarios y congresos nacionales e internacionales, como en la prensa local; los más destacados son: la actividad otorga 12.727 empleos directos e indirectos que corresponden al 12% de la fuerza laboral ocupada; la actividad representa el 19% del Producto Interno Bruto de la ciudad; la actividad aporta un 21% al presupuesto municipal por concepto de recaudación de tributos y representan un 11% del presupuesto total asignado al municipio por el Estado de Chile. El sector industrial marítimo-portuario de la ciudad sigue siendo la actividad industrial más relevante en la ciudad y demanda el desarrollo de una planificación estratégica que permita vincular la actividad turística de la ciudad vecina de Viña del Mar con la actividad portuaria de Valparaíso. Para lograr tal objetivo es necesario realizar cambios en los atributos de las operaciones portuarias que permitan ofrecer productos asociados al turismo. This thesis proposes a methodology to measure the socio economic variables in the port city of Valparaiso, as an alternative to evaluate the allocation of the usage and exploitation of the coastline. The city of Valparaiso was formed to advance the port maritime activity and in the beginning this activity was the engine of economic development of the city. Its inhabitants remained highly dependent on it and formed a port identity and culture. With the decline of port activity, mainly due to the construction of the Panama Canal and the modernization of the transport vessels increasing distances, the city lost its dependence on this activity. Today almost all of the coastline of the city is assigned to port activities with very little labor participation of the inhabitants of the city and a high demand for the use of urban waterfront. Moreover, the city has shown high levels of unemployment in the past decade, questioning the true value of maintaining a port in the city. The research of this thesis provides insights into the number of firms and economic activities that were developed around the port maritime activity in the city, quantifying the jobs they gave to the city, the levels of pay, taxes to the municipality of city and the contribution to local commerce, among others. The findings discovered allow reflexions on the importance of the activity in the current and future economic development of the city. The data obtained also allows a contribution of the evaluation of alternative projects for the use and exploitation of the coastline. The methodology can also be adapted to measure the benefits of other port cities in the world. The results were presented to local government authorities, at seminars and national and international conferences, and in the local press. The most important finding are: the activity maritime port activity provides 12,727 direct and indirect jobs that are 12% of the employed labor force; activity represents which is 19% of the GDP of the city, the activity contributes 21% to the municipal budget by way of the collection of taxes and represents 11% of the total budget allocated to the municipality by the Republic of Chile. The industrial maritime port sector of the city remains the most important industrial activity in the city and demands the development of strategic planning to link the tourism in the neighboring city of Viña del Mar and to the Valparaiso port activity. To achieve this goal it is necessary to make changes to the attributes of port operations that allow the offering of products associated with tourism.

A dual-band priority assignment algorithm for dynamic QoS resource management

Future high-quality consumer electronics will contain a number of applications running in a highly dynamic environment, and their execution will need to be efficiently arbitrated by the underlying platform software. The multimedia applications that currently execute in such similar contexts face frequent run-time variations in their resource demands, originated by the greedy nature of the multimedia processing itself. Changes in resource demands are triggered by numerous reasons (e.g. a switch in the input media compression format). Such situations require real-time adaptation mechanisms to adjust the system operation to the new requirements, and this must be done seamlessly to satisfy the user experience. One solution for efficiently managing application execution is to apply quality of service resource management techniques, based on assigning and enforcing resource contracts to applications. Most resource management solutions provide temporal isolation by enforcing resource assignments and avoiding any resource overruns. However, this has a clear limitation over the cost-effective resource usage. This paper presents a simple priority assignment scheme based on uniform priority bands to allow that greedy multimedia tasks incur in safe overruns that increase resource usage and do not threaten the timely execution of non-overrunning tasks. Experimental results show that the proposed priority assignment scheme in combination with a resource accounting mechanism preserves timely multimedia execution and delivery, achieves a higher cost-effective processor usage, and guarantees the execution isolation of non-overrunning tasks.

Optimization of Monte Carlo code for clinical simulation of electron beams

The aim of this work is to optimize a Monte Carlo (MC) kernel for electron radiation therapy (IOERT) compatible with intraoperative usage and to integrate it within an existing IOERT dedicated treatment planning system (TPS)