Dynamic network rating for low carbon distribution network operation:a U.K. application

Dynamic asset rating (DAR) is one of the number of techniques that could be used to facilitate low carbon electricity network operation. Previous work has looked at this technique from an asset perspective. This paper focuses, instead, from a network perspective by proposing a dynamic network rating (DNR) approach. The models available for use with DAR are discussed and compared using measured load and weather data from a trial network area within Milton Keynes in the central area of the U.K. This paper then uses the most appropriate model to investigate, through a network case study, the potential gains in dynamic rating compared to static rating for the different network assets - transformers, overhead lines, and cables. This will inform the network operator of the potential DNR gains on an 11-kV network with all assets present and highlight the limiting assets within each season.

Sistemas de cálculo, análise e operação virtual: interferências de campos elétricos e magnéticos produzidas por estações radio base de acesso múltiplo por divisão de código em banda larga - WCDMA

In this work it was developed mathematical resolutions taking as parameter maximum intensity values for the interference analysis of electric and magnetic fields and was given two virtual computer system that supports families of CDMA and WCDMA technologies. The first family were developed computational resources to solve electric and magnetic field calculations and power densities in Radio Base stations , with the use of CDMA technology in the 800 MHz band , taking into account the permissible values referenced by the Commission International Protection on non-Ionizing Radiation . The first family is divided into two segments of calculation carried out in virtual operation. In the first segment to compute the interference field radiated by the base station with input information such as radio channel power; Gain antenna; Radio channel number; Operating frequency; Losses in the cable; Attenuation of direction; Minimum Distance; Reflections. Said computing system allows to quickly and without the need of implementing instruments for measurements, meet the following calculated values: Effective Radiated Power; Sector Power Density; Electric field in the sector; Magnetic field in the sector; Magnetic flux density; point of maximum permissible exposure of electric field and power density. The results are shown in charts for clarity of view of power density in the industry, as well as the coverage area definition. The computer module also includes folders specifications antennas, cables and towers used in cellular telephony, the following manufacturers: RFS World, Andrew, Karthein and BRASILSAT. Many are presented "links" network access "Internet" to supplement the cable specifications, antennas, etc. . In the second segment of the first family work with more variables , seeking to perform calculations quickly and safely assisting in obtaining results of radio signal loss produced by ERB . This module displays screens representing propagation systems denominated "A" and "B". By propagating "A" are obtained radio signal attenuation calculations in areas of urban models , dense urban , suburban , and rural open . In reflection calculations are present the reflection coefficients , the standing wave ratio , return loss , the reflected power ratio , as well as the loss of the signal by mismatch impedance. With the spread " B" seek radio signal losses in the survey line and not targeted , the effective area , the power density , the received power , the coverage radius , the conversion levels and the gain conversion systems radiant . The second family of virtual computing system consists of 7 modules of which 5 are geared towards the design of WCDMA and 2 technology for calculation of telephone traffic serving CDMA and WCDMA . It includes a portfolio of radiant systems used on the site. In the virtual operation of the module 1 is compute-: distance frequency reuse, channel capacity with noise and without noise, Doppler frequency, modulation rate and channel efficiency; Module 2 includes computes the cell area, thermal noise, noise power (dB), noise figure, signal to noise ratio, bit of power (dBm); with the module 3 reaches the calculation: breakpoint, processing gain (dB) loss in the space of BTS, noise power (w), chip period and frequency reuse factor. Module 4 scales effective radiated power, sectorization gain, voice activity and load effect. The module 5 performs the calculation processing gain (Hz / bps) bit time, bit energy (Ws). Module 6 deals with the telephone traffic and scales 1: traffic volume, occupancy intensity, average time of occupancy, traffic intensity, calls completed, congestion. Module 7 deals with two telephone traffic and allows calculating call completion and not completed in HMM. Tests were performed on the mobile network performance field for the calculation of data relating to: CINP , CPI , RSRP , RSRQ , EARFCN , Drop Call , Block Call , Pilot , Data Bler , RSCP , Short Call, Long Call and Data Call ; ECIO - Short Call and Long Call , Data Call Troughput . As survey were conducted surveys of electric and magnetic field in an ERB , trying to observe the degree of exposure to non-ionizing radiation they are exposed to the general public and occupational element. The results were compared to permissible values for health endorsed by the ICNIRP and the CENELEC .

Setting the Rules of the Game: Mega-Regionals and the Role of the WTO

Faced with a WTO in a state of paralysis, large developed trading nations have shifted their attentions to other fora to pursue their trade policy objectives. In particular, preferential trade agreements (PTAs) are now being used to promote the regulatory disciplines that were previously rejected by developing countries at the multilateral level. These so-called ‘deep’ or ‘21st century’ PTAs address a variety of issues, from technical norms, procurement, investment protection and intellectual property rights to social and environmental protection. Moreover, recently, developed countries have sought to negotiate PTAs which are large in scale, both in terms of economic size and geographical reach, including the so-called ‘mega-regional’ PTAs, such as the EU-US Transatlantic Trade and Investment Partnership, the EU-Japan PTA, the Transpacific Partnership, and the China-backed Regional Comprehensive Economic Partnership. These mega-regional PTAs are distinctive not just in terms of their sheer size and the breadth and depth of issues addressed, but also because some of their proponents readily admit that one of the central aims pursued by such agreements is to design global rules on new trade issues. In other words, these agreements are being conceived as alternatives to multilateral rule making at the WTO level. The proliferation of 21st century trade deals raises important questions concerning the continued relevance of the WTO as a global rule-making venue, and the impact that the regulatory disciplines promoted in such agreements will have on both developing and developed countries. This paper discusses the emerging features of an international trading system that is increasingly populated by large-scale PTAs and discusses some of the points of tension that arise from such practice. Firstly, it examines instances of horizontal tension resulting from the proliferation of PTAs, particularly the extent to which such PTAs represent a threat or multilateral trade governance. Secondly, it looks at an example of vertical tension by examining the manner in which the imposition of regulatory disciplines through trade agreements can undermine the ability of countries, especially developing countries, to pursue legitimate public interest objectives. Finally, the paper considers a number of steps that could be considered to address some of the adverse effects associated with the fragmentation of the international trading system, including the option of embracing variable geometry within the WTO framework and the need to develop mechanisms that provide flexibility for developing countries in the implementation of regulatory disciplines.

Magnetómetro para medida de campos electromagnéticos débiles en la banda ELF

La invención comprende un sistema para la medición de campos electromagnéticos débiles, en la banda de frecuencias comprendida entre 1 a 100 Hz, donde se localizan señales derivadas de la resonancia natural que ocurre entre la tierra y la ionosfera, las resonancias de Schumann. El sistema está compuesto por un núcleo de material ferromagnético (1) y un conjunto de bobinas separadas entre sí (2), conectadas mediante cables unifilares (8). Un cable de par trenzado (3) conecta el sensor a un sistema electrónico de medida (4) compuesto por un amplificador diferencial (5) al que se acoplan cada par trenzado, en una bifurcación coaxial con las mallas comunes (20), (21) mediante conectores coaxiales (22), (23) y con salida a un convertidor analógico digital (6). La geometría, estructura y materiales del sistema, le confieren sus propiedades de sensibilidad y ancho de banda.

Actuador con mecanismo de rigidez variable y par umbral

Actuador con mecanismo de rigidez variable y par umbral, del tipo de los utilizados en articulaciones de revolución de brazos robóticos y que pueden modificar su rigidez. El actuador incorpora un motor (1) que se encarga de controlar la posición de equilibrio del eslabón de salida (13). El mecanismo contiene un resorte (18) y una palanca (12). La rigidez del mecanismo puede ser modificada variando la posición de esta palanca (12) mediante un motor (14). Dicha rigidez determina el valor del giro entre la posición de la polea (2) solidaria al eje de salida del motor (1) y la posición del eslabón (13). Dos tensores (5) y (6) permiten modificar la precarga de dos cables (3) y (4) respectivamente, de forma que el mecanismo no entra en funcionamiento hasta que no se ha sobrepasado un cierto valor de par sobre la articulación.

Cable laying and pulling

The common methods of cable laying are: • Direct in the ground in trenches (underground cables). • In cable trenches in outdoors switchyards. • In cable trays or cable ducts • Fixed with clamps (usually at walls and ceilings). • In conduits.

Presidents Park, Reservation no. 1 : [Washington D.C.].

Shows buildings plantings, drives, telephone and electric light cables, water pipes, hydrants, etc.

Comportamiento de alambres de una aleación de aluminio 5154A durante la deformación en frío

Los procesos en los que se involucra la deformación plástica en la industria de los metales son usados para la fabricación en masa de productos. Una de las metas mas ambiciosas de la industria es la de validar la teoría de la deformación de los materiales con el objetivo de controlar los factores que afectan el comportamiento del material sometido a deformación para asegurar sus propiedades mecánicas, para implementar los mas eficientes métodos de producción y sobre todo, para obtener productos de alta calidad. Por todo esto, la presente investigación es una aproximación experimental que busca describir el comportamiento de un alambrón de sección circular de aluminio 5154A sometida a deformación en frío hasta obtener una cinta. Las características y propiedades deseadas de dicha cinta incluyen las dimensiones 0.381mm de espesor y 9.54mm de ancho; una resistencia mecánica entre 260-300 MPa y un valor mínimo de deformación de 7.8%. La aplicación final de la cinta será la de blindaje de cables eléctricos. El proceso de laminación se llevó a cabo sobre dos alambrones de diferente diámetro inicial. Se usó un molino dúo en ambos casos. Para el alambrón de 9.5mm de diámetro inicial, se realizaron 9 pases hasta obtener una cinta de 0.38mm de espesor con recocidos parciales intercalados entre los pases de laminación. Para el alambre de 5.12mm de diámetro se realizó una serie de cinco pases para obtener la cinta. El recocido de la cinta final se hizo hasta después del último pase de laminación. Se estudió la velocidad de giro de los molinos durante el proceso de laminación. Esta variable tuvo una influencia casi nula en el comportamiento de deformación aunque al mismo tiempo fue posible determinar un valor máximo sugerido para evitar el agrietamiento del alambre a deformar, esto es, una velocidad de 0.20 m/s. El análisis de la evolución microestructural se realizó por microscopía óptica con la cual se pudo evidenciar el cambio en la morfología de los granos debido a la deformación. Los ensayos de tensión se usaron para determinar las propiedades mecánicas; éstos se hicieron para el conjunto de muestras obtenidas de la laminación tanto del alambrón de 9.5 mm de diámetro como en el de 5.12mm. Las propiedades finales de la cinta dependen principalmente del tiempo de recocido. En menor medida, el orden en que se intercalaron los recocidos parciales, también tuvo afectación en las propiedades finales. La técnica de difracción de electrones retrodispersados se usó para el análisis de la textura del material sometido a diferentes porcentajes de reducción, es decir, 14, 34 y 58 %. Con esta deformación no fue posible determinar si existe una orientación que se pueda considerar preferencial. Sin embargo, fue posible identificar la presencia de las componentes que forman la fibra b, las cuales son las componentes Cúbica, Cobre, Goss, Latón y S. La intensidad de dichas componentes se ve afectada por el grado de deformación.

Estudio de factibilidad de un servicio de transporte público complementario al tranvía de Ayacucho por medio de servicios alimentadores

De acuerdo con el plan de desarrollo para la ciudad de Medellín, se creó el corredor verde de Ayacucho, el cual se implementó con un sistema masivo de transporte público con tecnología tranviaria, alimentada por dos cables y un sistema de buses alimentadores -- Dentro de dicho plan se contempla el proceso de racionalización de las empresas de buses tradicionales de la zona, dicho proceso generará una demanda que el mismo tranvía, con su capacidad y su modelo operacional no podrá satisfacer; por lo tanto, y para aliviarla, se propone un proyecto en el que intervengan vehículos alimentadores, creando un escenario en el que el tranvía con sus cables movilice a los pasajeros para los cuales fue concebido, mientras que el resto de la población se podrá movilizar en vehículos amigables con el medio ambiente, que permitirán que el transporte público actual de la zona evolucione a transporte masivo, con las condiciones de seguridad, infraestructura, tecnología y desarrollo que esto conlleva

Cruzeiros Científicos Estrangeiros em águas de soberania Portuguesa: O caso da Alemanha

Desde cedo que a ligação de Portugal ao mar é reconhecida como sendo de extrema importância. Olhando para a geografia do país e ao percurso histórico observa-se uma ligação natural ao mar e tal facto pode-se comprovar através de dados de fácil acesso e conhecimento geral: 100% do petróleo chega ao nosso país através do mar, 70% das importações usam a via marítima, 90% do turismo procura o litoral, 95% da internet circula por cabos submarinos. Não distante destes números, encontra-se a abundante riqueza geológica e biológica presente nas águas de soberania ou jurisdição portuguesa – ou seja, na 3ª maior Zona Económica Exclusiva da União Europeia e a 11ª do mundo, num total de cerca de1,727,408 km² – riqueza essa que desperta interesse cientifico em diversos estados internacionais, como abordado ao longo da presente dissertação. Neste sentido, é importante entender quais os recursos presentes nas águas sob jurisdição portuguesa, qual o tipo de missões efetuadas por intervenientes internacionais ao nível dos cruzeiros científicos e, tomando uma investigação e estudo mais estreito, o papel da Alemanha como um dos Estados internacionais presentes em águas Portuguesas para investigação cientifica. A presente dissertação começa por abordar, portanto, o quadro legal que regula toda a matéria dos cruzeiros de investigação cientifica a nível nacional assim como todo o processo de pedidos de autorização para a realização de cruzeiros científicos, por parte de entidades estrangeiras, procedendo-se de seguida à apresentação dos recursos presentes em águas de soberania ou jurisdição portuguesa. É então explicada a definição de cruzeiro cientifico e diversos tipos de cruzeiros existentes e por fim, o caso particular da Alemanha no contexto dos cruzeiros científicos na ZEE Portuguesa.

Modelagem e análise de um dispositivo mitigador de flecha para linhas de transmissão de energia elétrica baseado em ligas com memória de forma

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2016.