NACP, the precursor protein of the non-amyloid beta/A4 protein (A beta) component of Alzheimer disease amyloid, binds A beta and stimulates A beta aggregation.

NACP, a 140-amino acid presynaptic protein, is the precursor of NAC [the non-amyloid beta/A4 protein (A beta) component of Alzheimer disease (AD) amyloid], a peptide isolated from and immunologically localized to brain amyloid of patients afflicted with AD. NACP produced in Escherichia coli bound to A beta peptides, the major component of AD amyloid. NACP bound to A beta 1-38 and A beta 25-35 immobilized on nitrocellulose but did not bind to A beta 1-28 on the filter under the same conditions. NACP binding to A beta 1-38 was abolished by addition of A beta 25-35 but not by A beta 1-28, suggesting that the hydrophobic region of the A beta peptide is critical to this binding. NACP-112, a shorter splice variant of NACP containing the NAC sequence, bound to A beta, but NACP delta, a deletion mutant of NACP lacking the NAC domain, did not bind A beta 1-38. Furthermore, binding between NACP-112 and A beta 1-38 was decreased by addition of peptide Y, a peptide that covers the last 15 residues of NAC. In an aqueous solution, A beta 1-38 aggregation was observed when NACP was also present in an incubation mixture at a ratio of 1:125 (NACP/A beta), whereas A beta 1-38 alone or NACP alone did not aggregate under the same conditions, suggesting that the formation of a complex between A beta and NACP may promote aggregation of A beta. Thus, NACP can bind A beta peptides through the specific sequence and can promote A beta aggregation, raising the possibility that NACP may play a role in the development of AD amyloid.

Trans-Pacific migrations of the loggerhead turtle (Caretta caretta) demonstrated with mitochondrial DNA markers.

Juvenile loggerhead turtles (Caretta caretta) have recently been documented in the vicinity of Baja California and thousands of these animals have been captured in oceanic fisheries of the North Pacific. The presence of loggerhead turtles in the central and eastern North Pacific is a prominent enigma in marine turtle distribution because the nearest documented nesting concentrations for this species are in Australia and Japan, over 10,000 km from Baja California. To determine the origin of the Baja California feeding aggregate and North Pacific fishery mortalities, samples from nesting areas and pelagic feeding aggregates were compared with genetic markers derived from mtDNA control region sequences. Overall, 57 of 60 pelagic samples (95%) match haplotypes seen only in Japanese nesting areas, implicating Japan as the primary source of turtles in the North Pacific Current and around Baja California. Australian nesting colonies may contribute the remaining 5% of these pelagic feeding aggregates. Juvenile loggerhead turtles apparently traverse the entire Pacific Ocean, approximately one-third of the planet, in the course of developmental migrations, but mortality in high-seas fisheries raises concern over the future of this migratory population.

Coupled Biomechanical Response of the Cornea Assessed by Non-Contact Tonometry. A Simulation Study

The mechanical response of the cornea subjected to a non-contact air-jet tonometry diagnostic test represents an interplay between its geometry, the corneal material behavior and the loading. The objective is to study this interplay to better understand and interpret the results obtained with a non-contact tonometry test. A patient-specific finite element model of a healthy eye, accounting for the load free configuration, was used. The corneal tissue was modeled as an anisotropic hyperelastic material with two preferential directions. Three different sets of parameters within the human experimental range obtained from inflation tests were considered. The influence of the IOP was studied by considering four pressure levels (10–28 mmHg) whereas the influence of corneal thickness was studied by inducing a uniform variation (300–600 microns). A Computer Fluid Dynamics (CFD) air-jet simulation determined pressure loading exerted on the anterior corneal surface. The maximum apex displacement showed a linear variation with IOP for all materials examined. On the contrary, the maximum apex displacement followed a cubic relation with corneal thickness. In addition, a significant sensitivity of the apical displacement to the corneal stiffness was also obtained. Explanation to this behavior was found in the fact that the cornea experiences bending when subjected to an air-puff loading, causing the anterior surface to work in compression whereas the posterior surface works in tension. Hence, collagen fibers located at the anterior surface do not contribute to load bearing. Non-contact tonometry devices give useful information that could be misleading since the corneal deformation is the result of the interaction between the mechanical properties, IOP, and geometry. Therefore, a non-contact tonometry test is not sufficient to evaluate their individual contribution and a complete in-vivo characterization would require more than one test to independently determine the membrane and bending corneal behavior.

Unblocking the Lifeline of Talent. CEPS Policy Brief No. 306, 6 December 2013

Against the background of looming demographic decline, the departure of the baby-boom generation from European labour markets and growing economic competitiveness from emerging economies, this CEPS Policy Brief, published jointly with the Bertelsmann Stiftung, looks into the potential benefits of increased intra-EU labour mobility. The authors examine the ‘German case’ on EU labour mobility, digging below the surface of the aggregate data. They offer proposals on how to foster a European fair deal on talent, one that would benefit the EU as a whole. The paper concludes with policy recommendations on how to increase the potential benefits of the freedom of movement for both individual EU citizens and for the EU as a whole.

Fine-tuning the use of bail-in to promote a stronger EU financial system. CEPS Special Report No. 136/April 2016

This paper discusses the application of the new European rules for burden-sharing and bail-in in the banking sector, in view of their ability to accommodate broader policy goals of aggregate financial stability. It finds that the Treaty principles and the new discipline of state aid and the restructuring of banks provide a solid framework for combating moral hazard and removing incentives that encourage excessive risk-taking by bankers. However, the application of the new rules may have become excessively attentive to the case-by-case evaluation of individual institutions, while perhaps losing sight of the aggregate policy needs of the banking system. Indeed, in this first phase of the banking union, while large segments of the EU banking sector still require a substantial restructuring and recapitalisation, the market may not be able to provide all the needed resources in the current environment of depressed profitability and low growth. Thus, a systemic market failure may be making the problem impossible to fix without resorting to temporary public support. But the risk of large write-offs of capital instruments due to burden-sharing and bail-in may represent an insurmountable obstacle to such public support as it may set in motion an investors’ flight. The paper concludes by showing that existing rules do contain the flexibility required to accommodate aggregate policy requirements in the general interest, and outlines a public support scheme for the precautionary recapitalisation of solvent banks that would be compliant with EU law.

Video image analysis of aggregates : a study report on evaluation of coarse aggregate shape and size properties using video imaging /

"Report no. FHWA-IL-UI-278"--Technical report documentation page.

A Geophysical Investigation of the Arctic Sea Ice Surface

Thesis (Ph.D.)--University of Washington, 2016-06

A double blind, randomized, multicenter, parallel group study of the effectiveness and tolerance of intraarticular hyaluronan in osteoarthritis of the knee

Objective. To investigate the efficacy and tolerability of a course of 5 injections of hyaluronan (HA) given at intervals of one week in patients with symptomatic, mild to moderate osteoarthritis (OA) of the knee. Methods: A double blind, randomized, parallel group, multicenter (17 centers), saline vehicle-controlled study was conducted over 18 weeks. Patients received either 25 mg (2.5 ml) HA in a phosphate buffered solution or 2.5 ml vehicle containing only the buffer by intraarticular injection. Five injections were given at one week intervals and the patients were followed for a further 13 weeks. The Western Ontario McMaster (WOMAC) OA instrument was used as the primary efficacy variable and repeated measures analysis of covariance was used to compare the 2 treatments over Weeks 6, 10, 14, and 18. Results. Of 240 patients randomized for inclusion in the study, 223 were evaluable for the modified intention to treat analysis. The active treatment and control groups were comparable for demographic details, OA history, and previous treatments. Scores for the pain and stiffness subscales of the WOMAC were modestly but significantly lower in the HA-treated group overall (Weeks 6 to 18; p < 0.05) and the statistically significant difference from the control was not apparent until after the series of injections was complete. The physical function subscale did not reach statistical significance (p = 0.064). Tolerability of the procedure was good and there were no serious adverse events that were considered to have a possible causal relationship with the study treatment. Conclusion. Intraarticular HA treatment was significantly more effective than saline vehicle in mild to moderate OA of the knee for the 13 week postinjection period of the study.

Validation and patient acceptance of a computer touch screen version of the WOMAC 3.1 osteoarthritis index

Objectives: To validate the WOMAC 3.1 in a touch screen computer format, which applies each question as a cartoon in writing and in speech (QUALITOUCH method), and to assess patient acceptance of the computer touch screen version. Methods: The paper and computer formats of WOMAC 3.1 were applied in random order to 53 subjects with hip or knee osteoarthritis. The mean age of the subjects was 64 years ( range 45 to 83), 60% were male, 53% were 65 years or older, and 53% used computers at home or at work. Agreement between formats was assessed by intraclass correlation coefficients (ICCs). Preferences were assessed with a supplementary questionnaire. Results: ICCs between formats were 0.92 (95% confidence interval, 0.87 to 0.96) for pain; 0.94 (0.90 to 0.97) for stiffness, and 0.96 ( 0.94 to 0.98) for function. ICCs were similar in men and women, in subjects with or without previous computer experience, and in subjects below or above age 65. The computer format was found easier to use by 26% of the subjects, the paper format by 8%, and 66% were undecided. Overall, 53% of subjects preferred the computer format, while 9% preferred the paper format, and 38% were undecided. Conclusion: The computer format of the WOMAC 3.1 is a reliable assessment tool. Agreement between computer and paper formats was independent of computer experience, age, or sex. Thus the computer format may help improve patient follow up by meeting patients' preferences and providing immediate results.

Performance of the Norwegian version of AUSCAN - a disease-specific measure of hand osteoarthritis

Objective: To examine the performance of the Norwegian version of the AUSCAN Index as a disease-specific health status measure in patients with hand osteoarthritis (OA). Methods: One hundred and ninety-nine patients with clinical hand OA (mean (SD) age 61.7 (5.7) years, 18 (9%) males) underwent a comprehensive examination including joint status, examination of grip strength and completion of several self-reported health status questionnaires. The Australian/Canadian OA hand index (AUSCAN) captures three different dimensions of hand OA: pain (5 items), stiffness (1 item), and difficulties with daily activities (9 items). Our pre-study hypothesis was to identify AUSCAN as a specific hand measure with strong correlations to hand measures and lower correlations to other general measures of health. Results: Patient completion of the AUSCAN Index was similar or better than other measures. The internal consistency of the AUSCAN was excellent. The pain and physical dimension of AUSCAN correlated substantially to, each other and moderately to the stiffness scale. The AUSCAN physical scale correlated moderately to substantially to other measures, the highest correlation being seen with the Arthritis Impact Measurement Scale (AIMS) 2 hand and finger function scale (r= 0.73). The standardised differences between patients with and without radiographic abnormalities were numerically larger for the AUSCAN pain and physical scales than for other measures. Conclusion: The Norwegian version of the AUSCAN has an acceptable clinimetric performance and is a suitable tool for assessment of hand OA. (C) 2005 OsteoArthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Analysis of the effect of transverse modes on free-space optical interconnect performance

Vertical-cavity surface-emitting lasers (VCSELs) and microlenses can be used to implement free space optical interconnects (FSOIs) which do not suffer from the bandwidth limitations inherent in metallic interconnects. A comprehensive link equation describing the effects of both optical and electrical noise is introduced. We have evaluated FSOI performance by examining the following metrics: the space-bandwidth product (SBP), describing the density of channels and aggregate bandwidth that can be achieved, and the carrier-to-noise ratio (CNR), which represents the relative strength of the carrier signal. The mode expansion method (MEM) was used to account for the primary cause of optical noise: laser beam diffraction. While the literature commonly assumes an ideal single-mode laser beam, we consider the experimentally determined multimodal structure of a VCSEL beam in our calculations. It was found that maximum achievable interconnect length and density for a given CNR was significantly reduced when the higher order transverse modes were present in Simulations. However, the Simulations demonstrate that free-space optical interconnects are still a suitable solution for the communications bottleneck, despite the adverse effects introduced by transverse modes.

Effect of the average soft-segment length on the morphology and properties of segmented polyurethane nanocomposites

Two organically modified layered silicates (with small and large diameters) were incorporated into three segmented polyurethanes with various degrees of microphase separation. Microphase separation increased with the molecular weight of the poly(hexamethylene oxide) soft segment. The molecular weight of the soft segment did not influence the amount of polyurethane intercalating the interlayer spacing. Small-angle neutron scattering and differential scanning calorimetry data indicated that the layered silicates did not affect the microphase morphology of any host polymer, regardless of the particle diameter. The stiffness enhancement on filler addition increased as the microphase separation of the polyurethane decreased, presumably because a greater number of urethane linkages were available to interact with the filler. For comparison, the small nanofiller was introduced into a polyurethane with a poly(tetramethylene oxide) soft segment, and a significant increase in the tensile strength and a sharper upturn in the stress-strain curve resulted. No such improvement occurred in the host polymers with poly(hexamethylene oxide) soft segments. It is proposed that the nanocomposite containing the more hydrophilic and mobile poly(tetramethylene oxide) soft segment is capable of greater secondary bonding between the polyurethane chains and the organosilicate surface, resulting in improved stress transfer to the filler and reduced molecular slippage. (c) 2006 Wiley Periodicals, Inc.

FDI and the labour market: a review of the evidence and policy implications

This paper presents a series of results concerning the labour-market impact of inward foreign direct investment (FDI) in the UK. The paper demonstrates that one of the crucial impacts of FDI is to increase wage inequality and the use of relatively more skilled labour in the domestic firms. This result is found to be a combination of two effects. First, the entry by a multinational enterprise (MNE) increases the demand for skilled workers in an industry or region, thus increasing wage inequality. Second, technology spillovers occur from foreign to domestic firms. As a result of these spillovers, relative demand for skilled workers increases in the domestic firms, further contributing to aggregate wage inequality and skill upgrading. The paper also considers how FDI impacts upon skill shares by productivity differentials between foreign and domestic firms. Finally, the policy implications of this are discussed, from the perspective of regional development, and the likely effectiveness of attracting FDI to reduce structural unemployment.

Estimating ECAP threshold from the variability of the response

Electrical compound action potentials (ECAPs) of the cochlear nerve are used clinically for quick and efficient cochlear implant parameter setting. The ECAP is the aggregate response of nerve fibres at various distances from the recording electrode, and the magnitude of the ECAP is therefore related to the number of fibres excited by a particular stimulus. Current methods, such as the masker-probe or alternating polarity methods, use the ECAP magnitude at various stimulus levels to estimate the neural threshold, from which the parameters are calculated. However, the correlation between ECAP threshold and perceptual threshold is not always good, with ECAP threshold typically being much higher than perceptual threshold. The lower correlation is partly due to the very different pulse rates used for ECAPs (below 100 Hz) and clinical programs (hundreds of Hz up to several kHz). Here we introduce a new method of estimating ECAP threshold for cochlear implants based upon the variability of the response. At neural threshold, where some but not all fibers respond, there is a different response each trial. This inter-trial variability can be detected overlaying the constant variability of the system noise. The large stimulus artefact, which requires additional trials for artefact rejection in the standard ECAP magnitude methods, is not consequential, as it has little variability. The variability method therefore consists of simply presenting a pulse and recording the ECAP, and as such is quicker than other methods. It also has the potential to be run at high rates like clinical programs, potentially improving the correlation with behavioural threshold. Preliminary data is presented that shows a detectable variability increase shortly after probe offset, at probe levels much lower than those producing a detectable ECAP magnitude. Care must be taken, however, to avoid saturation of the recording amplifier saturation; in our experiments we found a gain of 300 to be optimal.

An investigation of the dynamic characteristics of a bolted-rotor system

A Jeffcott rotor consists of a disc at the centre of an axle supported at its end by bearings. A bolted Jeffcott rotor is formed by two discs, each with a shaft on one side. The discs are held together by spring loaded bolts near the outer edge. When the rotor turns there is tendency for the discs to separate on one side. This effect is more marked if the rotor is unbalanced, especially at resonance speeds. The equations of motion of the system have been developed with four degrees of freedom to include the rotor and bearing movements in the respective axes. These equations which include non-linear terms caused by the rotor opening, are subjected to external force such from rotor imbalance. A simulation model based on these equations was created using SIMULINK. An experimental test rig was used to characterise the dynamic features. Rotor discs open at a lateral displacement of the rotor of 0.8 mm. This is the threshold value used to show the change of stiffness from high stiffness to low stiffness. The experimental results, which measure the vibration amplitude of the rotor, show the dynamic behaviour of the bolted rotor due to imbalance. Close agreement of the experimental and theoretical results from time histories, waterfall plots, pseudo-phase plots and rotor orbit plot, indicated the validity of the model and existence of the non-linear jump phenomenon.