Efeito da utilização de alfa amilase em dietas a base de milho e farelo de soja na digestibilidade da energia das rações e no desempenho de frangos de corte.

2006

Espécies florestais para produção de energia: resultados preliminares.

A Embrapa Amazônia Ocidental possui 7,5 hectares de plantios para teste das espécies Acacia mangium, Acacia auriculiformis, Sclerobium paniculatum (taxi-branco) e Bambusa vulgaris var. vitatta (bambu), que, em experimentos preliminares, mostram-se promissoras para produção de energia.

A hybrid power system for remote areas in Jordan

This paper presents a techno-economic assessment for a unique Isolated Hybrid Power System (IHPS) design for remote areas isolated from the grid which also has the capability of being operated as a smart μ-grid. The share of renewable energy sources in resource poor developing countries is low. In these countries an increase in the share of alternative energy (wind, water and sun) delivered with inexpensive operationally robust generation and delivery systems is seen to the way forward. In our design also incorporates a novel storage system to increase the effectiveness of the Isolated IHPSs previously reported in the literature. The configuration reported is a system consisting of, the wind and sun powered generation complemented with batteries, fuel cell unit and a diesel generator. The modelling design and simulations were based on Simulations conducted using MATLAB/SIMULINK, and HOMER Energy Planning and Design software tools. The design and simulation of a new storage approach incorporating Hydrogen Peroxide (H2O2) fuel cell (increasing the efficiency of the fuel cell from 35% to 65%) and a single board computer (Raspberry Pi) used for the energy management and control the system are the novel features of our design. The novel control strategy implemented also includes a synchronization capability that facilitates IHPS to IHPS or IHPS to Main-Grid connection. In the paper after briefly but comprehensively detailing the design and simulations we will present the results on which we conclude that smart independent systems that can utilize indigenous renewable energy with a capability of being able to synchronize with the grid or each other are the most optimal way of electrifying resource poor developing countries in a sustainable way with minimum impact on the environment and also achieve reductions in Green House Gases.

Sistemas fotovoltaicos este-oeste con capacidad de almacenamiento en la industria

El objetivo de este proyecto fin de carrera es ajustar el perfil generado por un sistema fotovoltaico con orientación este-oeste que dispone de una batería al perfil de demanda de distintas industrias en Alemania. Se ha puesto especial énfasis a los siguientes paquetes de trabajo: • Comparación de la eficiencia de un sistema fotovoltaico este-oeste frente a los resultados obtenidos con la típica orientación sur • Simulación de una instalación fotovoltaica este-oeste con una batería en una industria, basada en el software MATLAB / Simulink • Optimización económica. Los resultados obtenidos muestran que nunca es económico instalar un campo fotovoltaico este-oeste en vez de una instalación con orientación sur, en caso de que la única ventaja esperada sea el ensanche de la curva de generación de potencia.

Tecnologias CAC e Inquéritos de Percepção da Opinião Pública sobre “O papel da Captação e do Armazenamento/Sequestração de Dióxido de Carbono no Futuro da Energia na Europa”:O caso-de-estudo da Comunidade Fernando Pessoa

O carvão e outros combustíveis fósseis, continuarão a ser, por décadas, a principal matéria-prima energética para as Centrais Térmicas, não obstante os esforços para, dentro do possível, substituir os combustíveis fósseis por fontes de energia renovável.Tal como está, hoje, bem documentado, a produção de gases com efeito estufa (GEE), designadamente CO2, resulta da combustão dos ditos combustíveis fósseis, sendo que se espera ser possível mitigar substancialmente a emissão de tais gases com a aplicação das chamadas Tecnologias Limpas do Carvão.Há, pois, necessidade de promover o abatimento do CO2 através de Tecnologias de Emissão Zero ou Tecnologias Livres de Carbono, incluindo designadamente a Captura, o Transporte e a Sequestração geológica de CO2 correspondentes ao que é costume designar por Tecnologias CAC (Captação e Armazenamento de Carbono). De facto, tais tecnologias e, designadamente, o armazenamento geológico de CO2 são as únicas que, no estado actual do conhecimento, são capazes de permitir que se cumpram as metas do ambicioso programa da EU para a energia e o ambiente conhecido por “20 20 para 2020” em conjugação com os aspectos económicos das directivas relativas ao Comércio Europeu de Licenças de Emissão – CELE (Directivas 2003/87/EC, 2004/101/EC e 2009/29/EC).A importância do tema está, aliás, bem demonstrada com o facto da Comissão Europeia ter formalmente admitido que as metas supracitadas serão impossíveis de atingir sem Sequestração Geológica de CO2. Esta é, pois, uma das razões de ter sido recentemente publicada a Directiva Europeia 2009/31/EC de 23 de Abril de 2009 expressamente dedicada ao tema do Armazenamento Geológico de CO2.Ora, a questão do armazenamento geológico de CO2 implica, para além das Tecnologias CAC acima mencionadas e da sua viabilização em termos tanto técnicos como económicos, ou seja, neste último aspecto, competitiva com o sistema CELE, também o conhecimento, da percepção pública sobre o assunto. Isto é, a praticabilidade das Tecnologias CAC implica que se conheça a opinião pública sobre o tema e, naturalmente, que face a esta realidade se prestem os esclarecimentos necessários como, aliás, é reconhecido na própria Directiva Europeia 2009/31/EC.Dado que a Fundação Fernando Pessoa / Universidade Fernando Pessoa através do seu Centro de Investigação em Alterações Globais, Energia, Ambiente e Bioengenharia – CIAGEB tem ultimado um Projecto de Engenharia relativo à Sequestração Geológica de CO2 nos Carvões (Metantracites) da Bacia Carbonífera do Douro – o Projecto COSEQ, preocupou-se naturalmente, desde o início, com o lançamento de inquéritos de percepção da opinião pública sobre o assunto.Tal implicou, nesta fase, a tradução para português e o lançamento do inquérito europeu ACCSEPT que não tinha sido ainda formalmente lançado de forma generalizada entre nós. Antes, porém, de lançar publicamente tal inquérito – o que está actualmente já em curso – resolveu-se testar o método de lançamento, a recolha de dados e o seu tratamento com uma amostra correspondente ao que se designou por Comunidade Fernando Pessoa, i.e. o conjunto de docentes, discentes, funcionários e outras pessoas relacionadas com a Universidade Fernando Pessoa (cerca de 5000 individualidades).Este trabalho diz, precisamente, respeito à preparação, lançamento e análise dos resultados do dito inquérito Europeu ACCSEPT a nível da Comunidade Fernando Pessoa. Foram recebidas 525 respostas representando 10,5% da amostra. A análise de resultados foi sistematicamente comparada com os obtidos nos outros países europeus, através do projecto ACCSEPT e, bem assim, com os resultados obtidos num inquérito homólogo lançado no Brasil. The use of coal, and other fossil fuels, will remain for decades as the main source of energy for power generation, despite the important efforts made to replace, as far as possible, fossil fuels with renewable power sources.As is well documented, the production of Greenhouse Gases (GHG), mainly CO2, arises primarily from the combustion of fossil fuels. The increasing application of Clean Coal Technologies-CCTs, is expected to mitigate substantially against the emission of such gases.There is consequently a need to promote the CO2 abatement through Zero Emission (Carbon Free) Technologies - ZETs, which includes CO2 capture, transport and geological storage, i.e. the so-called CCS (Carbon, Capture and Storage) technologies. In fact, these technologies are the only ones that are presently able to conform to the ambitious EU targets set out under the “20 20 by 2020” EU energy and environment programme, jointly with the economic aspects of the EU Directives 2003/87/EC, 2004/101/EC and 2009/29/EC concerned with the Greenhouse Gas Emissions Allowance Trading Scheme – ETS scheme. The European Commission formal admission that the referred targets will be impossible to reach without the implementation and contribution of geological storage clearly demonstrate the importance of this particular issue, and for this reason the EC Directive 2009/31/EC of April 23, 2009 on Geological Storage of CO2 was recently published.In considering the technical and economical viabilities of CCS technologies, the latter in competition with the ETS scheme, it is believed that public perception will dictate the success of the development and implementation of CO2 geological storage at a large industrial level. This means that, in order to successfully implement CCS technologies, not only must public opinion be taken into consideration but objective information must also be provided to the public in order to raise subject awareness, as recognized in the referred Directive 2009/31/EC.In this context, the Fernando Pessoa Foundation / University Fernando Pessoa, through its CIAGEB (Global Change, Energy, Environment and Bioengineering) RDID&D Unit, is the sponsor of an Engineering Project for the Geological Sequestration of CO2 in Douro Coalfield Meta-anthracites - the COSEQ Project, and is therefore also engaged in public perception surveys with regards to CCS technologies.At this stage, the original European ACCSEPT inquiry was translated to Portuguese and submitted only to the “Fernando Pessoa Community” - comprising university lecturers, students, other employees, as well as, former students and persons that have a professional or academic relationship with the university (c. 5000 individuals). The results obtained from this first inquiry will be used to improve the survey informatics system in terms of communication, database, and data treatment prior to resubmission of the inquiry to the Portuguese public at large.The present publication summarizes the process and the results obtained from the ACCSEPT survey distributed to the “Fernando Pessoa Community”. 525 replies, representing 10.5% of the sample, have been received and analysed. The assessment of the results was systematically compared with those obtained from other European Countries, as reported by the ACCSEPT inquiry, as well as with those from an identical inquiry launched in Brazil.

Energia eólica

Actualmente, é indiscutível a importância das energias ditas renováveis no contexto da produção mundial de energia, destacando-se, dentro destas, a energia eólica pelas suas inúmeras vantagens. Neste artigo descrevem-se as vantagens e desvantagens deste tipo de energia e apresenta-se uma discussão da evolução da potência instalada de acordo com os dados fornecidos pelos organismos correspondentes. Pretende-se, além disso, explicar a evolução da potência instalada na Europa e, mais especificamente, no caso de Portugal, explicar a baixa potência instalada tendo em conta o elevado potencial eólico disponível. The importance of renewable energies in the context of the world energy production is nowadays unquestionable, namely in the case of the eolic energy, due to its specific advantages. In this paper, the advantages and disadvantages of this type of energy are described, and a discussion of the evolution of the wind power installed is presented according to the data published by the different organisms involved. It is intended to show and explain the evolution of the wind power capacity installed in the European Union. Finally, it is discussed the Portuguese specificity characterized by a low wind power installed despite the high eolic potential available.

Vantagens do ciclo combinado a gás natural face a outras tecnologias de produção de energia. Estudo de caso

Seria impensável concebermos os nossos dias sem a utilização de energia eléctrica. Esta forma de energia é responsável pelo desenvolvimento económico e a sua disponibilidade é indicadora da qualidade de vida dos povos. A procura de formas de obtenção desta energia que minimizem os impactes para o ambiente tem levado à adopção de energias renováveis mas também ao desenvolvimento de novas tecnologias que permitam aumentar a eficiência de conversão de energia entre as suas várias formas. Neste sentido procedeu-se à análise de um estudo de caso da central termoeléctrica a gás natural com tecnologia de ciclo combinado da Tapada do Outeiro, Portugal. Living without electricity is nowadays unconceived. The economic growth and quality of life is strongly dependent on this source of energy. The search for new forms of producing electricity in order to minimise environmental impacts has lead to the adoption of renewable energies and to the improvement of new technologies which allow at the same time to reach high efficiency in the process of energy conversion from the chemical form to the electrical one. This article is about a case study of a natural gas turbine power plant with combined cycle, at “Tapada do Outeiro”, Portugal.

Interpolación Polinomial usando el Matlab

Con frecuencia se presenta la oportunidad de ajustar curvas a un conjunto de datos representados por puntos. Las técnicas desarrolladas para este fin dependen, fundamentalmente, de la naturaleza de los datos involucrados. El propósito de este trabajo es introducir a los alumnos de Cálculo Numérico, en el uso de la técnica de ajuste de curvas por medio de la interpolación en la solución de problemas de ingeniería, utilizando el paquete MATLAB. Además de que se espera que los alumnos asimilen y dominen los conceptos específicos impartidos referidos a la interpolación, se pretende que comprueben lo indispensable de la utilización de una computadora para resolver este tipo de problemas. También se espera, a partir de las distintas actividades propuestas a realizar por los alumnos, que observen y reconozcan cuándo la interpolación polinomial resulta apropiada arribando así, a resultados satisfactorios. Es decir que en esta primer instancia, se espera que los alumnos hayan aprendido a valorar la confiabilidad de las respuestas y ser capaces de escoger el mejor método (o métodos) para cualquier problema que deben afrontar frecuentemente en la práctica de la ingeniería o en diferentes problemas científicos o tecnológicos. Además, como resultado del análisis y comprensión de las actividades presentadas en este trabajo, se pretende introducir a los alumnos en el uso de la técnica de ajuste de curvas por medio de la regresión, a fin de que comprendan la diferencia entre interpolación y regresión, y que el confundirlos puede llevarlos a resultados erróneos.

Simulation of coupled heat and moisture transfer in air-conditioned buildings

The simultaneous heat and moisture transfer in the building envelope has an important influence on the indoor environment and the overall performance of buildings. In this paper, a model for predicting whole building heat and moisture transfer was presented. Both heat and moisture transfer in the building envelope and indoor air were simultaneously considered; their interactions were modeled. The coupled model takes into account most of the main hygrothermal effects in buildings. The coupled system model was implemented in MATLAB-Simulink, and validated by using a series of published testing tools. The new program was applied to investigate the moisture transfer effect on indoor air humidity and building energy consumption under different climates. The results show that the use of more detailed simulation routines can result in improvements to the building's design for energy optimisation through the choice of proper hygroscopic materials, which would not be indicated by simpler calculation techniques.

Coordinated Control of DFIG and FSIG-based Wind Farms under Unbalanced Grid Conditions

This paper investigates the control and operation of doubly-fed induction generator (DFIG) and fixed-speed induction generator (FSIG) based wind farms under unbalanced grid conditions. A DFIG system model suitable for analyzing unbalanced operation is developed, and used to assess the impact of an unbalanced supply on DFIG and FSIG operation. Unbalanced voltage at DFIG and FSIG terminals can cause unequal heating on the stator windings, extra mechanical stresses and output power fluctuations. These problems are particularly serious for the FSIG-based wind farm without a power electronic interface to the grid. To improve the stability of a wind energy system containing both DFIG and FSIG based wind farms during network unbalance, a control strategy of unbalanced voltage compensation by the DFIG systems is proposed. The DFIG system compensation ability and the impact of transmission network impedance are illustrated. The simulation results implemented in Matlab/Simulink show that the proposed DFIG control system improves not only its own performance, but also the stability of the FSIG system with the same grid connection point during network unbalance.

Calculation of Critical Clearing Time of Embedded Generation for Relay Setting Based on Optimisation Method

his paper proposes an optimisation-based method to calculate the critical slip (speed) of dynamic stability and critical clearing time (CCT) of a self-excited induction generator (SEIG). A simple case study using the Matlab/Simulink environment has been included to exemplify the optimisation method. Relationships between terminal voltage, critical slip and reactance of transmission line, CCT and inertial constant have been determined, based on which analysis of impact on relaying setting has been further conducted for another simulation case.

Optimisation of Kinetic Parameters for an After-treatment Catalyst

Mathematical modelling has become an essential tool in the design of modern catalytic systems. Emissions legislation is becoming increasingly stringent, and so mathematical models of aftertreatment systems must become more accurate in order to provide confidence that a catalyst will convert pollutants over the required range of conditions. 
Automotive catalytic converter models contain several sub-models that represent processes such as mass and heat transfer, and the rates at which the reactions proceed on the surface of the precious metal. Of these sub-models, the prediction of the surface reaction rates is by far the most challenging due to the complexity of the reaction system and the large number of gas species involved. The reaction rate sub-model uses global reaction kinetics to describe the surface reaction rate of the gas species and is based on the Langmuir Hinshelwood equation further developed by Voltz et al. [1] The reactions can be modelled using the pre-exponential and activation energies of the Arrhenius equations and the inhibition terms. 
The reaction kinetic parameters of aftertreatment models are found from experimental data, where a measured light-off curve is compared against a predicted curve produced by a mathematical model. The kinetic parameters are usually manually tuned to minimize the error between the measured and predicted data. This process is most commonly long, laborious and prone to misinterpretation due to the large number of parameters and the risk of multiple sets of parameters giving acceptable fits. Moreover, the number of coefficients increases greatly with the number of reactions. Therefore, with the growing number of reactions, the task of manually tuning the coefficients is becoming increasingly challenging. 
In the presented work, the authors have developed and implemented a multi-objective genetic algorithm to automatically optimize reaction parameters in AxiSuite®, [2] a commercial aftertreatment model. The genetic algorithm was developed and expanded from the code presented by Michalewicz et al. [3] and was linked to AxiSuite using the Simulink add-on for Matlab. 
The default kinetic values stored within the AxiSuite model were used to generate a series of light-off curves under rich conditions for a number of gas species, including CO, NO, C_{3H8 and C3H6. These light-off curves were used to generate an objective function.} 
This objective function was used to generate a measure of fit for the kinetic parameters. The multi-objective genetic algorithm was subsequently used to search between specified limits to attempt to match the objective function. In total the pre-exponential factors and activation energies of ten reactions were simultaneously optimized. 
The results reported here demonstrate that, given accurate experimental data, the optimization algorithm is successful and robust in defining the correct kinetic parameters of a global kinetic model describing aftertreatment processes.