Análisis financiero de la empresa Cementos Argos de Colombia S.A y el sector cementero en Colombia

A partir del 2010, el sector cementero en Colombia experimentó un crecimiento en sus ventas que lo ha posicionado como uno de los sectores más rentable en el país. Esta oportunidad de crecimiento ha permitido que Cementos Argos de Colombia se convirtiera en la empresa líder del sector. Expandiéndose así a mercados internacionales teniendo presencia en países de Centroamérica y Estados Unidos. Por lo tanto es necesario indagar las implicaciones que han tenido los cambios en el sector en las finanzas de la empresa. Para tal fin, se realiza el presente trabajo, que busca determinar de qué manera Cementos Argos de Colombia usa sus recursos para ser una de las empresas del sector mejor posicionada a pesar del crecimiento del mismo y la fuerte competencia que existente. Para esto, se estableció el análisis financiero de Cementos Argos de Colombia, diferentes herramientas e indicadores financieros que ayudaron a identificar, analizar, describir y evaluar los aspectos claves que garantizan el éxito de la empresa.

Perfil logístico de Volkswagen desde la producción

Este análisis muestra detalladamente la línea de producción de la planta de Volkswagen, ubicada en México en el estado de Puebla. Se describe la capacidad operativa utilizada para satisfacer la demanda de la planta de producción de automóviles más grande de Latinoamérica, siendo clave para mantenerse en el mercado con estándares de calidad altos y contribuir al desarrollo de la economía del país. Asimismo, a nivel regional, esta planta se abastece de proveedores estratégicos ubicados en una zona cercana, ayudando a disminuir costos de transporte de piezas y tiempos de respuesta. Inicialmente se realiza una breve descripción del entorno económico de la empresa a nivel regional y del sector a nivel global para hacer énfasis en lo competitivo que es el mercado de la producción de automóviles. Posteriormente se describe la finalidad que tiene esta misión empresarial soportada por la Universidad del Rosario, donde se afianzan conocimientos importantes sobre un mercado de talla mundial. El siguiente aspecto es un diagnóstico de la empresa, donde se dan a conocer las marcas que hacen parte del grupo Volkswagen y la situación financiera que refleja la marca desde el 2012, revelando los ingresos obtenidos durante el período 2012-2014, gastos operacionales y factores que no se destacan positivamente como un flujo de caja negativo para el 2014. Posteriormente se plasman los conceptos teóricos necesarios para que el lector comprenda las variables inmersas en una planta de producción, destacando la teoría de colas y el diseño del layout de la empresa. Finalmente, se da una descripción detallada del proceso de producción en esta planta, donde se muestra la línea de producción, el ensamble y la importancia de un sistema operativo interno que depende principalmente de una alta inversión de tecnología e ingeniería que permite obtener un mayor beneficio en cada etapa del proceso.

Diseño y aplicación de un modelo de remuneración variable para una empresa del sector de las telecomunicaciones

Actualmente encontramos una fuerte presión en las organizaciones por adaptarse a un mundo competitivo con un descenso en las utilidades y una incertidumbre constante en su flujo de caja. Estas circunstancias obligan a las organizaciones al mejoramiento continuo buscando nuevas formas de gestionar sus procesos y sus recursos. Para las organizaciones de prestación de servicios en el sector de telecomunicaciones una de las ventajas competitivas más importantes de obtener es la productividad debido a que sus ganancias dependen directamente del número de actividades que puedan ejecutar cada empleado. El reto es hacer más con menos y con mejor calidad. Para lograrlo, la necesidad de gestionar efectivamente los recursos humanos aparece, y aquí es donde los sistemas de compensación toman un rol importante. El objetivo en este trabajo es diseñar y aplicar un modelo de remuneración variable para una empresa de prestación de servicios profesionales en el sector de las telecomunicaciones y con esto aportar al estudio de la gestión del desempeño y del talento humano en Colombia. Su realización permitió la documentación del diseño y aplicación del modelo de remuneración variable en un proyecto del sector de telecomunicaciones en Colombia. Su diseño utilizó las tendencias de programas remunerativos y teorías de gestión de desempeño para lograr un modelo integral que permita el crecimiento sostenido en el largo plazo y la motivación al recurso más importante de la organización que es el talento humano. Su aplicación permitió también la documentación de problemas y aciertos en la implementación de estos modelos.

Bank Governance and the Bail-in in the EU. A Law & Finance analysis on the role of bail-inable creditors

This dissertation assesses the impact of the EU Directive on Bank Recovery and Resolution (BRRD) on bank corporate governance and investigates a fundamental question. Can the resolution framework for distressed banks enhance the quality of banks’ decision making? According to the Directive, the Resolution Authority can impose losses on bank’s creditors in case of distress through a bail-in. Bail-inable creditors become residual claimants of the bank, contingent on its distress. The first part of the dissertation establishes an analytical framework for bank governance, starting from the problem of what can be defined as “good governance” in banking. The dissertation hypothesizes that governance regulation represents a necessary link between the incentives of corporate constituencies and the goals of substantive regulation. The second part builds upon this analytical framework and carries out a positive analysis encompassing three channels of debt governance; namely, price internalisation of risk; contractual arrangements and the discrete impact of different type of creditors. The existence of a resolution framework should incentivise bail-inable creditors to better discipline the borrowing bank; yet, the design of both the capital and resolution regulation largely foreclose such possibility to creditors. Against this backdrop, the third part of the dissertation moves to normative considerations. The approach to this normative part combines and complements the study of cash flow rights of the management with the study of the voting rights to bail-inable creditors. On the cash flow side, the dissertation proposes to include bail-inable debt as part of the variable remuneration for bank risk-takers. On the voting right, the proposal is to grant a limited basket of ex-ante governance rights to bail-inable creditors. Such a unified approach is rather uncommon in the literature, where cash flow rights and voting rights are often approached separately whereas those complement each other in the dissertation.

Optimizing urban traffic flow using genetic algorithm with petri net analysis as fitness function

This paper describes a new methodology adopted for urban traffic stream optimization. By using Petri net analysis as fitness function of a Genetic Algorithm, an entire urban road network is controlled in real time. With the advent of new technologies that have been published, particularly focusing on communications among vehicles and roads infrastructures, we consider that vehicles can provide their positions and their destinations to a central server so that it is able to calculate the best route for one of them. Our tests concentrate on comparisons between the proposed approach and other algorithms that are currently used for the same purpose, being possible to conclude that our algorithm optimizes traffic in a relevant manner.

Beam-energy Dependence Of The Directed Flow Of Protons, Antiprotons, And Pions In Au+au Collisions.

Rapidity-odd directed flow (v1) measurements for charged pions, protons, and antiprotons near midrapidity (y=0) are reported in sNN=7.7, 11.5, 19.6, 27, 39, 62.4, and 200 GeV Au+Au collisions as recorded by the STAR detector at the Relativistic Heavy Ion Collider. At intermediate impact parameters, the proton and net-proton slope parameter dv1/dy|y=0 shows a minimum between 11.5 and 19.6 GeV. In addition, the net-proton dv1/dy|y=0 changes sign twice between 7.7 and 39 GeV. The proton and net-proton results qualitatively resemble predictions of a hydrodynamic model with a first-order phase transition from hadronic matter to deconfined matter, and differ from hadronic transport calculations.

Determination of paracetamol at a graphite-polyurethane composite electrode as an amperometric flow detector

A bare graphite-polyurethane composite was evaluated as an amperometric flow injection detector in the determination of paracetamol (APAP) in pharmaceutical formulations. A linear analytical curve was observed in the 5.00 x 10-5 to 5.00 x 10-3 mol L-1 range with a minimum detectable net concentration of 18.9 µmol L-1 and 180 determinations h-1, after optimization of parameters such as the detection potential, sample loop volume, and carrier solution flow rate. Interference of ascorbic acid was observed, however, it was possible overcome the interference, reaching results that agreed with HPLC within 95% confidence level. These results showed that the graphite-polyurethane composite can be used as an amperometric detector for flow analysis in the determination of APAP.

Satellite protection and drag reduction using a purging gas flow

We have used the DSMC method to determine contamination (impingement of atmospheric molecules) and the aerodynamic forces on a cold satellite when a protective “purge gas” is ejected from a sting protruding ahead of the satellite. Forward ejection of the purge gas provides the greatest protection for a given mass of purge gas and the aerodynamic drag can be significantly reduced, thus compensating for the backward reaction from the forward ejection. If the purge gas is ejected backward from the sting (towards the satellite) the ejection provides thrust and the net retarding force can be reduced to zero. Contamination can be reduced and the mass of purging gas is less than the mass of conventional rocket propellant required to maintain the orbit of an unprotected satellite.

Shear stress and sediment transport calculations for sheet flow under waves

A simple method is provided for calculating transport rates of not too fine (d(50) greater than or equal to 0.20 mm) sand under sheet flow conditions. The method consists of a Meyer-Peter-type transport formula operating on a time-varying Shields parameter, which accounts for both acceleration-asymmetry and boundary layer streaming. While velocity moment formulae, e.g.., = Constant x calibrated against U-tube measurements, fail spectacularly under some real waves (Ribberink, J.S., Dohmen-Janssen, C.M., Hanes, D.M., McLean, S.R., Vincent, C., 2000. Near-bed sand transport mechanisms under waves. Proc. 27th Int. Conf. Coastal Engineering, Sydney, ASCE, New York, pp. 3263-3276, Fig. 12), the new method predicts the real wave observations equally well. The reason that the velocity moment formulae fail under these waves is partly the presence of boundary layer streaming and partly the saw-tooth asymmetry, i.e., the front of the waves being steeper than the back. Waves with saw-tooth asymmetry may generate a net landward sediment transport even if = 0, because of the more abrupt acceleration under the steep front. More abrupt accelerations are associated with thinner boundary layers and greater pressure gradients for a given velocity magnitude. The two real wave effects are incorporated in a model of the form Q(s)(t) = Q(s)[theta(t)] rather than Q(S)(t) = Q(S)[u(infinity)(t)], i.e., by expressing the transport rate in terms of an instantaneous Shields parameter rather than in terms of the free stream velocity, and accounting for both streaming and accelerations in the 0(t) calculations. The instantaneous friction velocities u(*)(t) and subsequently theta(t) are calculated as follows. Firstly, a linear filter incorporating the grain roughness friction factor f(2.5) and a phase angle phi(tau) is applied to u(infinity)(t). This delivers u(*)(t) which is used to calculate an instantaneous grain roughness Shields parameter theta(2.5)(t). Secondly, a constant bed shear stress is added which corresponds to the streaming related bed shear stress -rho ($) over bar((u) over tilde(w) over tilde)(infinity) . The method can be applied to any u(infinity)(t) time series, but further experimental validation is recommended before application to conditions that differ strongly from the ones considered below. The method is not recommended for rippled beds or for sheet flow with typical prototype wave periods and d(50) < 0.20 turn. In such scenarios, time lags related to vertical sediment movement become important, and these are not considered by the present model. (C) 2002 Elsevier Science B.V. All rights reserved.

Numerical investigations of flow and energy fields near a thermoacoustic couple

The flow field and the energy transport near thermoacoustic couples are simulated using a 2D full Navier-Stokes solver. The thermoacoustic couple plate is maintained at a constant temperature; plate lengths, which are short and long compared with the particle displacement lengths of the acoustic standing waves, are tested. Also investigated are the effects of plate spacing and the amplitude of the standing wave. Results are examined in the form of energy vectors, particle paths, and overall entropy generation rates. These show that a net heat-pumping effect appears only near the edges of thermoacoustic couple plates, within about a particle displacement distance from the ends. A heat-pumping effect can be seen even on the shortest plates tested when the plate spacing exceeds the thermal penetration depth. It is observed that energy dissipation near the plate increases quadratically as the plate spacing is reduced. The results also indicate that there may be a larger scale vortical motion outside the plates which disappears as the plate spacing is reduced. (C) 2002 Acoustical Society of America.

Fast left ventricle tracking in CMR images using localized anatomical affine optical flow

In daily cardiology practice, assessment of left ventricular (LV) global function using non-invasive imaging remains central for the diagnosis and follow-up of patients with cardiovascular diseases. Despite the different methodologies currently accessible for LV segmentation in cardiac magnetic resonance (CMR) images, a fast and complete LV delineation is still limitedly available for routine use. In this study, a localized anatomically constrained affine optical flow method is proposed for fast and automatic LV tracking throughout the full cardiac cycle in short-axis CMR images. Starting from an automatically delineated LV in the end-diastolic frame, the endocardial and epicardial boundaries are propagated by estimating the motion between adjacent cardiac phases using optical flow. In order to reduce the computational burden, the motion is only estimated in an anatomical region of interest around the tracked boundaries and subsequently integrated into a local affine motion model. Such localized estimation enables to capture complex motion patterns, while still being spatially consistent. The method was validated on 45 CMR datasets taken from the 2009 MICCAI LV segmentation challenge. The proposed approach proved to be robust and efficient, with an average distance error of 2.1 mm and a correlation with reference ejection fraction of 0.98 (1.9 ± 4.5%). Moreover, it showed to be fast, taking 5 seconds for the tracking of a full 4D dataset (30 ms per image). Overall, a novel fast, robust and accurate LV tracking methodology was proposed, enabling accurate assessment of relevant global function cardiac indices, such as volumes and ejection fraction.

Direct Power Control of Matrix Converter Based Unified Power Flow Controllers

This paper presents the Direct Power Control of Three-Phase Matrix Converters (DPC-MC) operating as Unified Power Flow Controllers (UPFC). Since matrix converters allow direct AC/AC power conversion without intermediate energy storage link, the resulting UPFC has reduced volume and cost, together with higher reliability. Theoretical principles of DPC-MC method are established based on an UPFC model, together with a new direct power control approach based on sliding mode control techniques. As a result, active and reactive power can be directly controlled by selection of an appropriate switching state of matrix converter. This new direct power control approach associated to matrix converters technology guarantees decoupled active and reactive power control, zero error tracking, fast response times and timely control actions. Simulation results show good performance of the proposed system.

Magma flow, exsolution processes and rock metasomatism in the Great Messejana-Plasencia dyke (Iberian Peninsula)

Magma flow in dykes is still not well understood; some reported magnetic fabrics are contradictory and the potential effects of exsolution and metasomatism processes on the magnetic properties are issues open to debate. Therefore, a long dyke made of segments with different thickness, which record distinct degrees of metasomatism, the Messejana-Plasencia dyke (MPD), was studied. Oriented dolerite samples were collected along several cross-sections and characterized by means of microscopy and magnetic analyses. The results obtained show that the effects of metasomatism on rock mineralogy are important, and that the metasomatic processes can greatly influence anisotropy degree and mean susceptibility only when rocks are strongly affected by metasomatism. Petrography, scanning electron microscopy (SEM) and bulk magnetic analyses show a high-temperature oxidation-exsolution event, experienced by the very early Ti-spinels, during the early stages of magma cooling, which was mostly observed in central domains of the thick dyke segments. Exsolution reduced the grain size of the magnetic carrier (multidomain to single domain transformation), thus producing composite fabrics involving inverse fabrics. These are likely responsible for a significant number of the 'abnormal' fabrics, which make the interpretation of magma flow much more complex. By choosing to use only the 'normal' fabric for magma flow determination, we have reduced by 50 per cent the number of relevant sites. In these sites, the imbrication angle of the magnetic foliation relative to dyke wall strongly suggests flow with end-members indicating vertical-dominated flow (seven sites) and horizontal-dominated flow (three sites).

Thick dyke emplacement and internal flow: A structural and magnetic fabric study of the deep-seated dolerite dyke of Foum Zguid (southern Morocco)

Knowledge on forced magma injection and magma flow in dykes is crucial for the understanding of how magmas migrate through the crust to the Earth's surface. Because many questions still persist, we used the long, thick, and deep-seated Foum Zguid dyke (Morocco) to investigate dyke emplacement and internal flow by means of magnetic methods, structural analysis, petrography, and scanning electron microscopy. We also investigated how the host rocks accommodated the intrusion. Regarding internal flow: 1. Important variations of the rock magnetic properties and magnetic fabric occur with distance from dyke wall; 2. anisotropy of anhysteretic remanent magnetization reveals that anisotropy of magnetic susceptibility (AMS) results mainly from the superposition of subfabrics with distinct coercivities and that the imbrication between magnetic foliation and dyke plane is more reliable to deduce flow than the orientation of the AMS maximum principal axis; and 3. a dominant upward flow near the margins can be inferred. The magnetic fabric closest to the dyke wall likely records magma flow best due to fast cooling, whereas in the core the magnetic properties have been affected by high-temperature exsolution and metasomatic effects due to slow cooling. Regarding dyke emplacement, this study shows that the thick forceful intrusion induced deformation by homogeneous flattening and/or folding of the host sedimentary strata. Dewatering related to heat, as recorded by thick quartz veins bordering the dyke in some localities, may have also helped accommodating dyke intrusion. The spatial arrangement of quartz veins and their geometrical relationship with the dyke indicate a preintrusive to synintrusive sinistral component of strike slip.

Experiencing flow while teaching and learning in individual tuition settings

Conferência anual da ISME