Estudo de toposseqüência da Baixada Litorânea Fluminense: efeitos do material de origem e posição topográfica

A influência dos materiais de origem, rochas do Pré-Cambriano e sedimentos coluviais e aluvionares delas derivados, e da posição topográfica na gênese de solos foi estudada em uma toposseqüência representativa das feições geomorfológicas da Baixada Litorânea Fluminense (RJ), no campus da Universidade Federal Rural do Rio de Janeiro (UFRRJ). Foram analisados seis perfis de solo, localizados no terço superior (P1 e P2), médio (P3) e inferior da encosta (P4 e P5), e na baixada (P6). Os processos pedogenéticos e as características dos solos foram relacionados com as unidades geomorfológicas e litoestratigráficas descritas na região. Os perfis P1 e P2, formados 'in situ' a partir do regolito do gnaisse, têm elevada saturação por bases, textura média/argilosa e minerais primários facilmente intemperizáveis na fração areia (micas e feldspatos). O P3, relacionado com uma rampa de colúvio, difere dos anteriores pela elevada saturação por alumínio e ausência de minerais primários facilmente intemperizáveis. P4 e P5, também formados de colúvio, diferem do P3 pela textura superficial arenosa e presença de horizonte E sobrejacente a fragipã. O P6, originado de sedimentos colúvio-aluvionais, tem cores cinzentas, estrutura maciça, textura argilosa e baixa saturação por bases. Os perfis foram classificados como Argissolo (P1, P2 e P3), Planossolo (P4 e P5) e Gleissolo (P6).

Mobilidade de íons em solo ácido com aplicação de calcário, ácido orgânico e material vegetal em superfície

Há controvérsias quanto à eficiência da correção da acidez da camada subsuperficial pela aplicação de calcário na presença de materiais vegetais de plantas de cobertura e faltam informações sobre os mecanismos envolvidos no processo. O objetivo deste estudo foi quantificar a contribuição dos materiais vegetais de plantas de cobertura, com ênfase nos seus conteúdos de ácidos orgânicos de baixa massa molar e nutrientes solúveis, sobre a mobilização, no perfil do solo, dos produtos da dissolução do calcário aplicado em superfície. Foram desenvolvidos dois experimentos em laboratório, usando colunas de PVC de 30 cm de altura com amostras deformadas de um Latossolo Vermelho textura muito argilosa. Os tratamentos constituíram-se da aplicação isolada ou conjunta de calcário para atingir 80 % de saturação por bases (6,1 t ha-1) e de materiais vegetais (20 t ha-1) de nabo forrageiro e aveia-preta, bem como de soluções de ácidos orgânicos e sais neutros aproximadamente equivalentes ao conteúdo dessas espécies. A calagem isolada ou em associação com os materiais vegetais promoveu a redução da acidez somente na camada superficial (0-8 cm). A baixa taxa de recuperação dos ácidos orgânicos adicionados (< 7,2 %) indica que essas substâncias presentes na massa seca do nabo forrageiro foram rapidamente degradadas por microrganismos ou adsorvidas aos colóides do solo, tendo pouca influência na mobilização de cátions. Parte substancial do efeito sobre a mobilização de íons pela aplicação de material vegetal de nabo forrageiro se deveu à composição química do material, em vista da alta solubilidade em água dos cátions (65 a 71 %) e ânions (84 %). Além disso, a solução de sais foi o tratamento mais eficiente para deslocar o Al do solo para as soluções percoladas. A adição de materiais vegetais teve pouca influência na mobilização no perfil do solo dos produtos da dissolução do calcário aplicado em superfície.

Plantillas para la creación de material docente accesible con herramientas ofimáticas y LaTex

Existen distintos tipos de dificultades de accesibilidad entre los alumnos que cursan sus estudios en nuestras facultades. Podemos encontrar por ejemplo algunos alumnos ciegos o con diferentes grados de baja visión, incluyendo los problemas debidos a la edad (presbicia o vista cansada), también alumnos con trastornos de aprendizaje como dislexia o TDAH o alumnos que sufren dificultades de acceso derivadas de los dispositivos que usan para la conexión (con pantallas muy pequeñas). La accesibilidad, como disciplina, pretende mejorar las condiciones de acceso a la información de todos ellos.El proyecto “Recursos docentes accesibles” (2010-2012), en el marco del Programa de Mejora e Innovación Docente de la Universidad de Barcelona, se centra en la baja visión y en la dislexia. El objetivo principal es crear y poner a disposición de todo el profesorado y de los responsables académicos de las titulaciones de la Universidad de Barcelona un conjunto de plantillas y modelos de documentos docentes accesibles en origen y fácilmente transformables a versiones ampliadas o mejoradas. El proyecto se desarrolla en la Facultad de Biblioteconomía y Documentación y la Facultad de Matemáticas y ha contado con la colaboración de numerosos docentes. La previsión es extender este proyecto a otras universidades con la esperanza que, entre todos, podamos mejorar los problemas de accesibilidad de los documentos docentes.

Modelo digital de elevação na caracterização de solos desenvolvidos de basalto e material arenítico

Os levantamentos de solos são na maioria antigos e pouco detalhados, geralmente nos níveis exploratório e de reconhecimento. Isso pode ser explicado pelo fato de que o método tradicional de levantamento de solos é lento e caro, requerendo grande número de observações de campo. Assim, o presente trabalho teve como objetivo caracterizar unidades de mapeamento de solos das regiões de Ibaté e São Carlos, SP, desenvolvidos de materiais basálticos e areníticos em função da declividade e altitudes correspondentes, com base em modelo digital de elevação (MDE). Primeiramente, foi feito um mapa de solos semidetalhado pelo método tradicional. Posteriormente, utilizando-se curvas de nível da região, foi elaborado o MDE, do qual foram extraídos mapas com diferentes classes de declividade e elevação. Por meio da tabulação cruzada, foi determinada a incidência de cada solo nas respectivas classes de declives e altitudes. Cada solo apresentou comportamento diferenciado em relação às classes de declive. Contudo, nas faixas limítrofes de declividade pode ocorrer sobreposição de dois ou mais solos. Na referida região, o Latossolo Amarelo encontra-se predominantemente nas regiões mais altas e de relevo plano; entretanto, solos pouco intemperizados, como os Neossolos Litólicos, aparecem em diferentes faixas de declividade. Conclui-se que o conhecimento da distribuição dos solos no relevo é de grande importância, pois facilita a execução do levantamento de solos. O modelo de elevação apresenta semelhanças com o mapa de solos, podendo auxiliar na sua determinação. As variações de solo, no entanto, são mais complexas, não dispensando as observações de campo.

Organic material decomposition and nutrient dynamics in a mulch system enriched with leguminous trees in the Amazon

The new techniques proposed for agriculture in the Amazon region include rotational fallow systems enriched with leguminous trees and the replacement of biomass burning by mulching. Decomposition and nutrient release from mulch were studied using fine-mesh litterbags with five different leguminous species and the natural fallow vegetation as control. Samples from each treatment were analyzed for total C, N, P, K, Ca, Mg, lignin, cellulose content and soluble polyphenol at different sampling times over the course of one year. The decomposition rate constant varied with species and time. Weight loss from the decomposed litter bag material after 96 days was 30.1 % for Acacia angustissima, 32.7 % for Sclerolobium paniculatum, 33.9 % for Iinga edulis and the Fallow vegetation, 45.2 % for Acacia mangium and 63.6 % for Clitoria racemosa. Immobilization of N and P was observed in all studied treatments. Nitrogen mineralization was negatively correlated with phenol, C-to-N ratio, lignin + phenol/N ratio, and phenol/phosphorus ratios and with N content in the litterbag material. After 362 days of field incubation, an average (of all treatments), 3.3 % K, 32.2 % Ca and 22.4 % Mg remained in the mulch. Results confirm that low quality and high amount of organic C as mulch application are limiting for the quantity of energy available for microorganisms and increase the nutrient immobilization for biomass decomposition, which results in competition for nutrients with the crop plants.

Nanocrystalline M-type hexaferrite powders: preparation, geometric and magnetic propertiess

Co-Ti-Sn-Ge substituted M-type bariumhexaferrite powders with mean grain sizes between about 10 nm and about 1 ¿m and a narrow size distribution were prepared reproducibly by means of a modified glass crystallization method. At annealing temperatures between 560 and 580°C of the amorphous flakes nanocrystalline particles grow. They behave superparamagnetically at room temperature and change into stable magnetic single domains at lower temperatures. The magnetic volume of the powders is considerably less than the geometric one. However, the effective anisotropy fields are larger by a Factor of two to three.

Nanocrystalline SnO2 by liquid pyrolisis

Liquid pyrolysis is presented as a new production method of SnO2 nanocrystalline powders suitable for gas sensor devices. The method is based on a pyrolytic reaction of high tensioned stressed drops of an organic solution of SnCl4·5(H2O). The main advantages of the method are its capability to produce SnO2 nanopowders with high stability, its accurate control over the grain size and other structural characteristics, its high level of repeatability and its low industrialization implementation cost. The characterization of samples of SnO2 nanoparticles obtained by liquid pyrolysis in the range between 200ºC and 900ºC processing temperature is carried out by X-ray diffraction, transmission electron microscopy, Raman and X-ray photoelectron spectroscopy. Results are analyzed and discussed so as to validate the advantages of the liquid pyrolysis method.

Structural and gas-sensing properties of WO3 nanocrystalline powders obtained by a sol-gel method from tungstic acid

WO3 nanocrystalline powders were obtained from tungstic acid following a sol-gel process. Evolution of structural properties with annealing temperature was studied by X-ray diffraction and Raman spectroscopy. These structural properties were compared with those of WO3 nanopowders obtained by the most common process of pyrolysis of ammonium paratungstate, usually used in gas sensors applications. Sol-gel WO3 showed a high sensor response to NO2 and low response to CO and CH4. The response of these sensor devices was compared with that of WO3 obtained from pyrolysis, showing the latter a worse sensor response to NO2. Influence of operating temperature, humidity, and film thickness on NO2 detection was studied in order to improve the sensing conditions to this gas.

Silicon nanocrystals as an enabling material for silicon Ppotonics

Silicon nanocrystals (Si-nc) is an enabling material for silicon photonics, which is no longer an emerging field of research but an available technology with the first commercial products available on the market. In this paper, properties and applications of Si-nc in silicon photonics are reviewed. After a brief history of silicon photonics, the limitations of silicon as a light emitter are discussed and the strategies to overcome them are briefly treated, with particular attention to the recent achievements. Emphasis is given to the visible optical gain properties of Si-nc and to its sensitization effect on Er ions to achieve infrared light amplification. The state of the art of Si-nc applied in a few photonic components is reviewed and discussed. The possibility to exploit Si-nc for solar cells is also presented. in addition, nonlinear optical effects, which enable fast all-optical switches, are described.

Effects of prior hydrogenation on the structure and properties of thermally nanocrystallized silicon layers

Nanocrystalline silicon layers have been obtained by thermal annealing of films sputtered in various hydrogen partial pressures. The as-deposited and crystallized films were investigated by infrared, Raman, x-ray diffraction, electron microscopy, and optical absorption techniques. The obtained data show evidence of a close correlation between the microstructure and properties of the processed material, and the hydrogen content in the as-grown deposit. The minimum stress deduced from Raman was found to correspond to the widest band gap and to a maximum hydrogen content in the basic unannealed sample. Such a structure relaxation seems to originate from the so-called "chemical annealing" thought to be due to Si-H2 species, as identified by infrared spectroscopy. The variation of the band gap has been interpreted in terms of the changes in the band tails associated with the disorder which would be induced by stress. Finally, the layers originally deposited with the highest hydrogen pressure show a lowest stress-which does not correlate with the hydrogen content and the optical band gap¿and some texturing. These features are likely related to the presence in these layers of a significant crystalline fraction already before annealing.

Force volume and stiffness tomography investigation on the dynamics of stiff material under bacterial membranes.

The determination of the characteristics of micro-organisms in clinical specimens is essential for the rapid diagnosis and treatment of infections. A thorough investigation of the nanoscale properties of bacteria can prove to be a fundamental tool. Indeed, in the latest years, the importance of high resolution analysis of the properties of microbial cell surfaces has been increasingly recognized. Among the techniques available to observe at high resolution specific properties of microscopic samples, the Atomic Force Microscope (AFM) is the most widely used instrument capable to perform morphological and mechanical characterizations of living biological systems. Indeed, AFM can routinely study single cells in physiological conditions and can determine their mechanical properties with a nanometric resolution. Such analyses, coupled with high resolution investigation of their morphological properties, are increasingly used to characterize the state of single cells. In this work, we exploit the capabilities and peculiarities of AFM to analyze the mechanical properties of Escherichia coli in order to evidence with a high spatial resolution the mechanical properties of its structure. In particular, we will show that the bacterial membrane is not mechanically uniform, but contains stiffer areas. The force volume investigations presented in this work evidence for the first time the presence and dynamics of such structures. Such information is also coupled with a novel stiffness tomography technique, suggesting the presence of stiffer structures present underneath the membrane layer that could be associated with bacterial nucleoids.

Documentary material relating to the history of Iowa - Volume 1, 1895.

Benjamin F. Shambaugh edited and compiled documents and publications for this book on the history of Iowa. This volume 1 includes documentary material from the Louisiana Purchase, the Territories of the Northwest, Wisconsin and Iowa; the Convention of 1857;the Iowa Constitution of 1846 and the Ratification of Constitutional Amendments.

Documentary material relating to the history of Iowa - Volume 2, 1896.

Benjamin F. Shambaugh edited and compiled documents and publications for this book on the history of Iowa. This volume 2 is concerned with the history of local political organizations and documents illustrative of the development of local government in the Territory of the Northwest from 1787 to 1800, in the Territory of Indiana from 1800 to 1805 and in the Territory of Michigan from 1805 to September 6, 1834.