Identification of Ultraviolet radiation induced Gallic acid and Caffeic acid formation in Palm juice (Borassus flabellifer) by HPLC & Mass Spectra Technique.

Palm juice, a common-cheap-antioxidants rich natural plant juice has been investigated for optimizing the effect of UV-radiation on the antioxidant activity using a DPPH free radical scavenging activity method. In this study separate set of samples of raw palm juice has been treated with 365 and 254 nm UV-lights (UVL) respectively for different exposure time. When exposed for 15 min with 365 nm UVL induces concentration factor of caffeic acid, whereas, 254 nm UVL induces gallic acid accumulation, but overall antioxidant activity was higher for 365 nm UVradiation. Caffeic acid and other polyphenol compounds are increased by 5.5 ± 0.5 % than normal palm juice, observed after irradiation with 365 nm UVL. Even after the exposure of UV irradiation for 15 min, did not affect on peptide bond modification of protein molecules present in palm juice, therefore a green effect of UVL is explored for the effective increase of antioxidant activity.

Development of the infrastructure for a multi-agent traffic management system simulation

This document contains detailed description of the design and the implementation of a multi-agent application controlling traffic lights in a city together with a system for simulating traffic and testing. The goal of this thesis is to design and build a simplified intelligent and distributed solution to the problem with the traffic in the big cities following different good practices in order to allow future refining of the model of the real world. The problem of the traffic in the big cities is still a problem that cannot be solved. Not only is the increasing number of cars a reason for the traffic jams, but also the way the traffic is organized. Usually, the intersections with traffic lights are replaced by roundabouts or interchanges to increase the number of cars that can cross the intersection in certain time. But still there are places where the infrastructure cannot be changed and the traffic light semaphores are the only way to control the car flows. In real life, the traffic lights have a predefined plan for change or they receive information from a centralized system when and how they have to change. But what if the traffic lights can cooperate and decide on their own when and how to change? Using this problem, the purpose of the thesis is to explore different agent-based software engineering approaches to design and build a non-conventional distributed system. From the software engineering point of view, the goal of the thesis is to apply the knowledge and use the skills, acquired during the various courses of the master program in Software Engineering, while solving a practical and complex problem such as the traffic in the cities.

Integration of low-cost supervisory mobile robots in domestic wireless sensor networks

This paper presents a communication interface between supervisory low-cost mobile robots and domestic Wireless Sensor Network (WSN) based on the Zig Bee protocol from different manufacturers. The communication interface allows control and communication with other network devices using the same protocol. The robot can receive information from sensor devices (temperature, humidity, luminosity) and send commands to actuator devices (lights, shutters, thermostats) from different manufacturers. The architecture of the system, the interfaces and devices needed to establish the communication are described in the paper.

Experimental observations on hot-spots and derived

The hot-spot phenomenon is a relatively frequent problem occurring in current photovoltaic generators. It entails both a risk for the photovoltaic module’s lifetime and a decrease in its operational efficiency. Nevertheless, there is still a lack of widely accepted procedures for dealing with them in practice. This paper presents the IES–UPM observations on 200 affected photovoltaic modules. Visual and infrared inspection, as well as electroluminescence, peak power rating and operating voltage tests have been carried out. Thermography under steady state conditions and photovoltaic module operating voltage, both at normal photovoltaic system operating conditions, are the selected methods to deal in practice with hot-spots. The temperature difference between the hot-spot and its surroundings, and the operating voltage differences between affected and non-affected photovoltaic modules are the base for establishing defective criteria, at the lights of both lifetime and operating efficiency considerations. Hot-spots temperature gradients larger than 20 °C, in any case, and larger than 10 °C when, at the same time, voltage operating losses are larger than the allowable power losses fixed at the photovoltaic module warranties, are proposed as rejecting conditions for routine inspections under contractual frameworks. The upper threshold of 20 °C is deduced for temperate climates from the basic criterion of keeping absolute hot-spot temperatures below 20 °C.

Color uniformity in spotligths - visual perception and system design

La iluminación con diodos emisores de luz (LED) está reemplazando cada vez en mayor medida a las fuentes de luz tradicionales. La iluminación LED ofrece ventajas en eficiencia, consumo de energía, diseño, tamaño y calidad de la luz. Durante más de 50 años, los investigadores han estado trabajando en mejoras LED. Su principal relevancia para la iluminación está aumentando rápidamente. Esta tesis se centra en un campo de aplicación importante, como son los focos. Se utilizan para enfocar la luz en áreas definidas, en objetos sobresalientes en condiciones profesionales. Esta iluminación de alto rendimiento requiere una calidad de luz definida, que incluya temperaturas ajustables de color correlacionadas (CCT), de alto índice de reproducción cromática (CRI), altas eficiencias, y colores vivos y brillantes. En el paquete LED varios chips de diferentes colores (rojo, azul, fósforo convertido) se combinan para cumplir con la distribución de energía espectral con alto CRI. Para colimar la luz en los puntos concretos deseados con un ángulo de emisión determinado, se utilizan blancos sintonizables y diversos colores de luz y ópticas secundarias. La combinación de una fuente LED de varios colores con elementos ópticos puede causar falta de homogeneidad cromática en la distribución espacial y angular de la luz, que debe resolverse en el diseño óptico. Sin embargo, no hay necesidad de uniformidad perfecta en el punto de luz debido al umbral en la percepción visual del ojo humano. Por lo tanto, se requiere una descripción matemática del nivel de uniformidad del color con respecto a la percepción visual. Esta tesis está organizada en siete capítulos. Después de un capítulo inicial que presenta la motivación que ha guiado la investigación de esta tesis, en el capítulo 2 se presentan los fundamentos científicos de la uniformidad del color en luces concentradas, como son: el espacio de color aplicado CIELAB, la percepción visual del color, los fundamentos de diseño de focos respecto a los motores de luz y ópticas no formadoras de imágenes, y los últimos avances en la evaluación de la uniformidad del color en el campo de los focos. El capítulo 3 desarrolla diferentes métodos para la descripción matemática de la distribución espacial del color en un área definida, como son la diferencia de color máxima, la desviación media del color, el gradiente de la distribución espacial de color, así como la suavidad radial y axial. Cada función se refiere a los diferentes factores que influyen en la visión, los cuales necesitan un tratamiento distinto que el de los datos que se tendrán en cuenta, además de funciones de ponderación que pre- y post-procesan los datos simulados o medidos para la reducción del ruido, la luminancia de corte, la aplicación de la ponderación de luminancia, la función de sensibilidad de contraste, y la función de distribución acumulativa. En el capítulo 4, se obtiene la función de mérito Usl para la estimación de la uniformidad del color percibida en focos. Se basó en los resultados de dos conjuntos de experimentos con factor humano realizados para evaluar la percepción visual de los sujetos de los patrones de focos típicos. El primer experimento con factor humano dio lugar al orden de importancia percibida de los focos. El orden de rango percibido se utilizó para correlacionar las descripciones matemáticas de las funciones básicas y la función ponderada sobre la distribución espacial del color, que condujo a la función Usl. El segundo experimento con factor humano probó la percepción de los focos bajo condiciones ambientales diversas, con el objetivo de proporcionar una escala absoluta para Usl, para poder así sustituir la opinión subjetiva personal de los individuos por una función de mérito estandarizada. La validación de la función Usl se presenta en relación con el alcance de la aplicación y condiciones, así como las limitaciones y restricciones que se realizan en el capítulo 5. Se compararon los datos medidos y simulados de varios sistemas ópticos. Se discuten los campos de aplicación , así como validaciones y restricciones de la función. El capítulo 6 presenta el diseño del sistema de focos y su optimización. Una evaluación muestra el análisis de sistemas basados en el reflector y la lente TIR. Los sistemas ópticos simulados se comparan en la uniformidad del color Usl, sensibilidad a las sombras coloreadas, eficiencia e intensidad luminosa máxima. Se ha comprobado que no hay un sistema único que obtenga los mejores resultados en todas las categorías, y que una excelente uniformidad de color se pudo alcanzar por la conjunción de dos sistemas diferentes. Finalmente, el capítulo 7 presenta el resumen de esta tesis y la perspectiva para investigar otros aspectos. ABSTRACT Illumination with light-emitting diodes (LED) is more and more replacing traditional light sources. They provide advantages in efficiency, energy consumption, design, size and light quality. For more than 50 years, researchers have been working on LED improvements. Their main relevance for illumination is rapidly increasing. This thesis is focused on one important field of application which are spotlights. They are used to focus light on defined areas, outstanding objects in professional conditions. This high performance illumination required a defined light quality including tunable correlated color temperatures (CCT), high color rendering index (CRI), high efficiencies and bright, vivid colors. Several differently colored chips (red, blue, phosphor converted) in the LED package are combined to meet spectral power distribution with high CRI, tunable white and several light colors and secondary optics are used to collimate the light into the desired narrow spots with defined angle of emission. The combination of multi-color LED source and optical elements may cause chromatic inhomogeneities in spatial and angular light distribution which needs to solved at the optical design. However, there is no need for perfect uniformity in the spot light due to threshold in visual perception of human eye. Therefore, a mathematical description of color uniformity level with regard to visual perception is required. This thesis is organized seven seven chapters. After an initial one presenting the motivation that has guided the research of this thesis, Chapter 2 introduces the scientific basics of color uniformity in spot lights including: the applied color space CIELAB, the visual color perception, the spotlight design fundamentals with regards to light engines and nonimaging optics, and the state of the art for the evaluation of color uniformity in the far field of spotlights. Chapter 3 develops different methods for mathematical description of spatial color distribution in a defined area, which are the maximum color difference, the average color deviation, the gradient of spatial color distribution as well as the radial and axial smoothness. Each function refers to different visual influencing factors, and they need different handling of data be taken into account, along with weighting functions which pre- and post-process the simulated or measured data for noise reduction, luminance cutoff, the implementation of luminance weighting, contrast sensitivity function, and cumulative distribution function. In chapter 4, the merit function Usl for the estimation of the perceived color uniformity in spotlights is derived. It was based on the results of two sets of human factor experiments performed to evaluate the visual perception of typical spotlight patterns by subjects. The first human factor experiment resulted in the perceived rank order of the spotlights. The perceived rank order was used to correlate the mathematical descriptions of basic functions and weighted function concerning the spatial color distribution, which lead to the Usl function. The second human factor experiment tested the perception of spotlights under varied environmental conditions, with to objective to provide an absolute scale for Usl, so the subjective personal opinion of individuals could be replaced by a standardized merit function. The validation of the Usl function is presented concerning the application range and conditions as well as limitations and restrictions in carried out in chapter 5. Measured and simulated data of various optical several systems were compared. Fields of applications are discussed as well as validations and restrictions of the function. Chapter 6 presents spotlight system design and their optimization. An evaluation shows the analysis of reflector-based and TIR lens systems. The simulated optical systems are compared in color uniformity Usl , sensitivity to colored shadows, efficiency, and peak luminous intensity. It has been found that no single system which performed best in all categories, and that excellent color uniformity could be reached by two different system assemblies. Finally, chapter 7 summarizes the conclusions of the present thesis and an outlook for further investigation topics.

Guidelines for Linked Data generation and publication: an example in building energy consumption

Linked Data is the key paradigm of the Semantic Web, a new generation of the World Wide Web that promises to bring meaning (semantics) to data. A large number of both public and private organizations have published their data following the Linked Data principles, or have done so with data from other organizations. To this extent, since the generation and publication of Linked Data are intensive engineering processes that require high attention in order to achieve high quality, and since experience has shown that existing general guidelines are not always sufficient to be applied to every domain, this paper presents a set of guidelines for generating and publishing Linked Data in the context of energy consumption in buildings (one aspect of Building Information Models). These guidelines offer a comprehensive description of the tasks to perform, including a list of steps, tools that help in achieving the task, various alternatives for performing the task, and best practices and recommendations. Furthermore, this paper presents a complete example on the generation and publication of Linked Data about energy consumption in buildings, following the presented guidelines, in which the energy consumption data of council sites (e.g., buildings and lights) belonging to the Leeds City Council jurisdiction have been generated and published as Linked Data.

Optimización de cimentaciones directas de medianería y esquina mediante modelos de elementos finitos

Existe un amplio catálogo de posibles soluciones para resolver la problemática de las zapatas de medianería así como, por extensión, las zapatas de esquina como caso particular de las anteriores. De ellas, las más habitualmente empleadas en estructuras de edificación son, por un lado, la utilización de una viga centradora que conecta la zapata de medianería con la zapata del pilar interior más próximo y, por otro, la colaboración de la viga de la primera planta trabajando como tirante. En la primera solución planteada, el equilibrio de la zapata de medianería y el centrado de la respuesta del terreno se consigue gracias a la colaboración del pilar interior con su cimentación y al trabajo a flexión de la viga centradora. La modelización clásica considera que se logra un centrado total de la reacción del terreno, con distribución uniforme de las tensiones de contacto bajo ambas zapatas. Este planteamiento presupone, por tanto, que la viga centradora logra evitar cualquier giro de la zapata de medianería y que el pilar puede, por ello, considerarse perfectamente empotrado en la cimentación. En este primer modelo, el protagonismo fundamental recae en la viga centradora, cuyo trabajo a flexión conduce frecuentemente a unas escuadrías y a unas cuantías de armado considerables. La segunda solución, plantea la colaboración de la viga de la primera planta, trabajando como tirante. De nuevo, los métodos convencionales suponen un éxito total en el mecanismo estabilizador del tirante, que logra evitar cualquier giro de la zapata de medianería, dando lugar a una distribución de tensiones también uniforme. Los modelos convencionales existentes para el cálculo de este tipo de cimentaciones presentan, por tanto, una serie de simplificaciones que permiten el cálculo de las mismas, por medios manuales, en un tiempo razonable, pero presentan el inconveniente de su posible alejamiento del comportamiento real de la cimentación, con las consecuencias negativas que ello puede suponer en el dimensionamiento de estos elementos estructurales. La presente tesis doctoral desarrolla un contraste de los modelos convencionales de cálculo de cimentaciones de medianería y esquina, mediante un análisis alternativo con modelos de elementos finitos, con el objetivo de poner de manifiesto las diferencias entre los resultados obtenidos con ambos tipos de modelización, analizar cuáles son las variables que más influyen en el comportamiento real de este tipo de cimentaciones y proponer un nuevo modelo de cálculo, de tipo convencional, más ajustado a la realidad. El proceso de investigación se desarrolla mediante una etapa experimental virtual que utiliza como modelo un pórtico tipo de edificación, ortogonal, de hormigón armado, con dos vanos y número variable de plantas. Tras identificar el posible giro de la cimentación como elemento clave en el comportamiento de las zapatas de medianería y de esquina, se adoptan como variables de estudio aquellas que mayor influencia puedan tener sobre el citado giro de las zapatas y sobre la rigidez del conjunto del elemento estructural. Así, se han estudiado luces de 3 m a 7 m, diferente número de plantas desde baja+1 hasta baja+4, resistencias del terreno desde 100 kN/m2 hasta 300 kN/m2, relaciones de forma de la zapata de medianería de 1,5 : 1 y 2 : 1, aumento y reducción de la cuantía de armado de la viga centradora y variación del canto de la viga centradora desde el mínimo canto compatible con el anclaje de la armadura de los pilares hasta un incremento del 75% respecto del citado canto mínimo. El conjunto de pórticos generados al aplicar las variables indicadas, se ha calculado tanto por métodos convencionales como por el método de los elementos finitos. Los resultados obtenidos ponen de manifiesto importantes discrepancias entre ambos métodos que conducen a importantes diferencias en el dimensionamiento de este tipo de cimentaciones. El empleo de los métodos tradicionales da lugar, por un lado, a un sobredimensionamiento de la armadura de la viga centradora y, por otro, a un infradimensionamiento, tanto del canto de la viga centradora, como del tamaño de la zapata de medianería y del armado de la viga de la primera planta. Finalizado el análisis y discusión de resultados, la tesis propone un nuevo método alternativo, de carácter convencional y, por tanto, aplicable a un cálculo manual en un tiempo razonable, que permite obtener los parámetros clave que regulan el comportamiento de las zapatas de medianería y esquina, conduciendo a un dimensionamiento más ajustado a las necesidades reales de este tipo de cimentación. There is a wide catalogue of possible solutions to solve the problem of party shoes and, by extension, corner shoes as a special case of the above. From all of them, the most commonly used in building structures are, on one hand, the use of a centering beam that connects the party shoe with the shoe of the nearest interior pillar and, on the other hand, the collaboration of the beam of the first floor working as a tie rod. In the first proposed solution, the balance of the party shoe and the centering of the ground response is achieved thanks to the collaboration of the interior pillar with his foundation along with the bending work of the centering beam. Classical modeling considers that a whole centering of the ground reaction is achieved, with uniform contact stress distribution under both shoes. This approach to the issue presupposes that the centering beam manages to avoid any rotation of the party shoe, so the pillar can be considered perfectly embedded in the foundation. In this first model, the leading role lies in the centering beam, whose bending work usually leads to important section sizes and high amounts of reinforced. The second solution, consideres the collaboration of the beam of the first floor, working as tie rod. Again, conventional methods involve a total success in the stabilizing mechanism of the tie rod, that manages to avoid any rotation of the party shoe, resulting in a stress distribution also uniform. Existing conventional models for calculating such foundations show, therefore, a series of simplifications which allow calculation of the same, by manual means, in a reasonable time, but have the disadvantage of the possible distance from the real behavior of the foundation, with the negative consequences this could bring in the dimensioning of these structural elements. The present thesis develops a contrast of conventional models of calculation of party and corner foundations by an alternative analysis with finite element models with the aim of bring to light the differences between the results obtained with both types of modeling, analysis which are the variables that influence the real behavior of this type of foundations and propose a new calculation model, conventional type, more adjusted to reality. The research process is developed through a virtual experimental stage using as a model a typical building frame, orthogonal, made of reinforced concrete, with two openings and variable number of floors. After identifying the possible spin of the foundation as the key element in the behavior of the party and corner shoes, it has been adopted as study variables, those that may have greater influence on the spin of the shoes and on the rigidity of the whole structural element. So, it have been studied lights from 3 m to 7 m, different number of floors from lower floor + 1 to lower floor + 4, máximum ground stresses from 100 kN/m2 300 kN/m2, shape relationships of party shoe 1,5:1 and 2:1, increase and decrease of the amount of reinforced of the centering beam and variation of the height of the centering beam from the minimum compatible with the anchoring of the reinforcement of pillars to an increase of 75% from the minimum quoted height. The set of frames generated by applying the indicated variables, is calculated both by conventional methods such as by the finite element method. The results show significant discrepancies between the two methods that lead to significant differences in the dimensioning of this type of foundation. The use of traditional methods results, on one hand, to an overdimensioning of the reinforced of the centering beam and, on the other hand, to an underdimensioning, both the height of the centering beam, such as the size of the party shoe and the reinforced of the beam of the first floor. After the analysis and discussion of results, the thesis proposes a new alternative method, conventional type and, therefore, applicable to a manual calculation in a reasonable time, that allows to obtain the key parameters that govern the behavior of party and corner shoes, leading to a dimensioning more adjusted to the real needings of this type of foundation.

Sistema de orientación en espacios interiores mediante balizas digitales

El planteamiento inicial de este proyecto surge debido a que hay personas con discapacidad cognitiva que se desorientan con mucha facilidad en espacios interiores. Para guiar a esas personas no se pueden usar los sistemas basados en GPS que se utilizan hoy en día en vehículos, ya que estos sistemas no funcionan en lugares cerrados porque no reciben la señal de los satélites. Por consiguiente se ha propuesto una solución basada en otra tecnología para que estas personas, a través de su dispositivo móvil, puedan guiarse en un sitio cerrado. Este Trabajo de Fin de Grado parte inicialmente de un Practicum realizado en el semestre anterior, donde se investigó sobre posibles soluciones de balizas digitales (iBeacons) y se estudió la tecnología iBeacon para conocer la posición del móvil en un espacio cerrado. El principal problema que se encontró fue la falta de precisión a la hora de estimar la distancia (en metros) que hay entre baliza y dispositivo móvil. El objetivo para este trabajo de fin de grado ha sido primeramente resolver el problema comentado anteriormente y una vez resuelto, implementar un prototipo móvil para el sistema operativo Android de un sistema de orientación en espacios interiores para personas con discapacidad cognitiva. Este prototipo ha sido implementado ayudándose de balizas digitales (iBeacons) y utilizando el método de trilateración para conocer la posición del usuario en un sitio cerrado. Además se han aprovechado los sensores (acelerómetro y sensor magnético terrestre) del dispositivo móvil como refuerzo de posicionamiento y para seguir de forma más precisa el movimiento del usuario. En el prototipo actual no se han dedicado recursos a diseñar una interacción fácil para personas con discapacidad cognitiva, debido a que su principal objetivo ha sido evaluar el funcionamiento de las balizas y las posibilidades del sistema de orientación. El resultado final de este TFG es incorporar una serie de luces asociadas a cada una de las balizas que ayuden al usuario a orientarse con mayor facilidad.---ABSTRACT---The initial approach of this project arises because there are people with cognitive disabilities who become disoriented in closed sites. To guide these people it cannot be used GPS, because this system does not work in closed sites because it does not receive the satellite signals. Therefore, it has proposed a solution based on another technology so that these people, through their smartphone, can be guided in a closed site. This final degree project comes from a Practicum made in the previous semester, where possible solutions about iBeacons were investigated and the iBeacon technology was studied too. All this, to know the mobile position in a closed site. The main problem encountered was the lack of precision to calculate the distance between a mobile phone and a beacon. The first objective has been to solve distance problem mentioned above, once resolved it has implemented a prototype, which consists in a guidance system in closed sites for a people with cognitive disabilities. This prototype has been implemented with beacons and trilateration to know user position in a closed site. In addition, mobile phone sensors have been used to follow user movement. In the current prototype, the main objective has been evaluate iBeacons performance and the guidance system. The result of this TFG is to incorporate a series of lights associated with each of the beacons to make easier the orientation.

Sistema de alarmas asistenciales para hospitales y residencias

En los hospitales y residencias geriátricas de hoy en día es necesario que tengan un sistema asistencial paciente-enfermera. Este sistema debe ser capaz de controlar y gestionar cada una de las alarmas que se puedan generar en el menor tiempo posible y con la mayor eficacia. Para ello se ha diseñado una solución completa llamada ConnectCare. La arquitectura modular del sistema y la utilización de comunicación IP permiten adaptar el sistema a cada situación proporcionando soluciones específicas a medida. Este sistema se compone de un software llamado Buslogic que gestiona las alarmas en un servidor y de unos dispositivos llamados Fonet Control TCP/IP que posee una doble función: por una parte, sirve como dispositivo intercomunicador telefónico y por otra parte, sirve como dispositivo de gestión de alarmas y control de otros dispositivos externos. Como dispositivo intercomunicador telefónico, se integra en la red telefónica como un terminal de extensión analógica permitiendo la intercomunicación entre el paciente y el personal sanitario. Se hará una breve descripción de la parte intercomunicadora pero no es el objeto de este proyecto. En cambio, en la parte de control se hará más hincapié del diseño y su funcionamiento ya que sí es el objeto de este proyecto. La placa de control permite la recepción de señales provenientes de dispositivos de llamadas cableados, como son pulsadores asistenciales tipo “pera” o tiradores de baño. También es posible recibir señales de alerta de dispositivos no estrictamente asistenciales como detectores de humo o detectores de presencia. Además, permite controlar las luces de las habitaciones de los residentes y actuar sobre otros dispositivos externos. A continuación se mostrará un presupuesto para tener una idea del coste que supone. El presupuesto se divide en dos partes, la primera corresponde en el diseño de la placa de control y la segunda corresponde a la fabricación en serie de la misma. Después hablaremos sobre las conclusiones que hemos sacado tras la realización de este proyecto y sobre las posibles mejoras, terminando con una demostración del funcionamiento del equipo en la vida real. ABSTRACT. Nowadays, in hospitals and nursing homes it is required to have a patient-nurse care system. This system must be able to control and manage each one of the alarms, in the shortest possible time and with maximum efficiency. For this, we have designed a complete solution called ConnectCare. The system architecture is modular and the communication is by IP protocol. This allows the system to adapt to each situation and providing specific solutions. This system is composed by a software, called Buslogic, which it manages the alarms in the PC server and a hardware, called Fonet Control TCP / IP, which it has a dual role: the first role, it is a telephone intercom device and second role, it is a system alarm manager and it can control some external devices. As telephone intercom device, it is integrated into the telephone network and also it is an analog extension terminal allowing intercommunication between the patient and the health personnel. A short description of this intercommunication system will be made, because it is not the subject of this project. Otherwise, the control system will be described with more emphasis on the design and operation point of view, because this is the subject of this project. The control board allows the reception of signals from wired devices, such as pushbutton handset or bathroom pullcord. It is also possible to receive warning signals of non nurse call devices such as smoke detectors or motion detectors. Moreover, it allows to control the lights of the patients’ rooms and to act on other external devices. Then, a budget will be showed. The budget is divided into two parts, the first one is related with the design of the control board and the second one corresponds to the serial production of it. Then, it is discussed the conclusions of this project and the possible improvements, ending with a demonstration of the equipment in real life.

Desarrollo de software de control y medida para goniofotómetro de tipo B

El proyecto trata del desarrollo de un software para realizar el control de la medida de la distribución de intensidad luminosa en luminarias LED. En el trascurso del proyecto se expondrán fundamentos teóricos sobre fotometría básica, de los cuales se extraen las condiciones básicas para realizar dicha medida. Además se realiza una breve descripción del hardware utilizado en el desarrollo de la máquina, el cual se basa en una placa de desarrollo Arduino Mega 2560, que, gracias al paquete de Labview “LIFA” (Labview Interface For Arduino”), será posible utilizarla como tarjeta de adquisición de datos mediante la cual poder manejar tanto sensores como actuadores, para las tareas de control. El instrumento de medida utilizado en este proyecto es el BTS256 de la casa GigaHerzt-Optik, del cual se dispone de un kit de desarrollo tanto en lenguaje C++ como en Labview, haciendo posible programar aplicaciones basadas en este software para realizar cualquier tipo de adaptación a las necesidades del proyecto. El software está desarrollado en la plataforma Labview 2013, esto es gracias a que se dispone del kit de desarrollo del instrumento de medida, y del paquete LIFA. El objetivo global del proyecto es realizar la caracterización de luminarias LED, de forma que se obtengan medidas suficientes de la distribución de intensidad luminosa. Los datos se recogerán en un archivo fotométrico específico, siguiendo la normativa IESNA 2002 sobre formato de archivos fotométricos, que posteriormente será utilizado en la simulación y estudio de instalaciones reales de la luminaria. El sistema propuesto en este proyecto, es un sistema basado en fotometría tipo B, utilizando coordenadas VH, desarrollando un algoritmo de medida que la luminaria describa un ángulo de 180º en ambos ejes, con una resolución de 5º para el eje Vertical y 22.5º para el eje Horizontal, almacenando los datos en un array que será escrito en el formato exigido por la normativa. Una vez obtenidos los datos con el instrumento desarrollado, el fichero generado por la medida, es simulado con el software DIALux, obteniendo unas medidas de iluminación en la simulación que serán comparadas con las medidas reales, intentando reproducir en la simulación las condiciones reales de medida. ABSTRACT. The project involves the development of software for controlling the measurement of light intensity distribution in LEDs. In the course of the project theoretical foundations on basic photometry, of which the basic conditions for such action are extracted will be presented. Besides a brief description of the hardware used in the development of the machine, which is based on a Mega Arduino plate 2560 is made, that through the package Labview "LIFA" (Interface For Arduino Labview "), it is possible to use as data acquisition card by which to handle both sensors and actuators for control tasks. The instrument used in this project is the BTS256 of GigaHerzt-Optik house, which is available a development kit in both C ++ language as LabView, making it possible to program based on this software applications for any kind of adaptation to project needs. The software is developed in Labview 2013 platform, this is thanks to the availability of the SDK of the measuring instrument and the LIFA package. The overall objective of the project is the characterization of LED lights, so that sufficient measures the light intensity distribution are obtained. Data will be collected on a specific photometric file, following the rules IESNA 2002 on photometric format files, which will then be used in the simulation and study of actual installations of the luminaire. The proposed in this project is a system based on photometry type B system using VH coordinates, developing an algorithm as the fixture describe an angle of 180 ° in both axes, with a resolution of 5 ° to the vertical axis and 22.5º for the Horizontal axis, storing data in an array to be written in the format required by the regulations. After obtaining the data with the instrument developed, the file generated by the measure, is simulated with DIALux software, obtaining measures of lighting in the simulation will be compared with the actual measurements, trying to play in the simulation the actual measurement conditions .

Image enhancement with MatLab algorithms

Nowadays, a lot of applications use digital images. For example in face recognition to detect and tag persons in photograph, for security control, and a lot of applications that can be found in smart cities, as speed control in roads or highways and cameras in traffic lights to detect drivers ignoring red light. Also in medicine digital images are used, such as x-ray, scanners, etc. These applications depend on the quality of the image obtained. A good camera is expensive, and the image obtained depends also on external factor as light. To make these applications work properly, image enhancement is as important as, for example, a good face detection algorithm. Image enhancement also can be used in normal photograph, for pictures done in bad light conditions, or just to improve the contrast of an image. There are some applications for smartphones that allow users apply filters or change the bright, colour or contrast on the pictures. This project compares four different techniques to use in image enhancement. After applying one of these techniques to an image, it will use better the whole available dynamic range. Some of the algorithms are designed for grey scale images and others for colour images. It is used Matlab software to develop and present the final results. These algorithms are Successive Means Quantization Transform (SMQT), Histogram Equalization, using Matlab function and own implemented function, and V transform. Finally, as conclusions, we can prove that Histogram equalization algorithm is the simplest of all, it has a wide variability of grey levels and it is not suitable for colour images. V transform algorithm is a good option for colour images. The algorithm is linear and requires low computational power. SMQT algorithm is non-linear, insensitive to gain and bias and it can extract structure of the data. RESUMEN. Hoy en día incontable número de aplicaciones usan imágenes digitales. Por ejemplo, para el control de la seguridad se usa el reconocimiento de rostros para detectar y etiquetar personas en fotografías o vídeos, para distintos usos de las ciudades inteligentes, como control de velocidad en carreteras o autopistas, cámaras en los semáforos para detectar a conductores haciendo caso omiso de un semáforo en rojo, etc. También en la medicina se utilizan imágenes digitales, como por ejemplo, rayos X, escáneres, etc. Todas estas aplicaciones dependen de la calidad de la imagen obtenida. Una buena cámara es cara, y la imagen obtenida depende también de factores externos como la luz. Para hacer que estas aplicaciones funciones correctamente, el tratamiento de imagen es tan importante como, por ejemplo, un buen algoritmo de detección de rostros. La mejora de la imagen también se puede utilizar en la fotografía no profesional o de consumo, para las fotos realizadas en malas condiciones de luz, o simplemente para mejorar el contraste de una imagen. Existen aplicaciones para teléfonos móviles que permiten a los usuarios aplicar filtros y cambiar el brillo, el color o el contraste en las imágenes. Este proyecto compara cuatro técnicas diferentes para utilizar el tratamiento de imagen. Se utiliza la herramienta de software matemático Matlab para desarrollar y presentar los resultados finales. Estos algoritmos son Successive Means Quantization Transform (SMQT), Ecualización del histograma, usando la propia función de Matlab y una nueva función que se desarrolla en este proyecto y, por último, una función de transformada V. Finalmente, como conclusión, podemos comprobar que el algoritmo de Ecualización del histograma es el más simple de todos, tiene una amplia variabilidad de niveles de gris y no es adecuado para imágenes en color. El algoritmo de transformada V es una buena opción para imágenes en color, es lineal y requiere baja potencia de cálculo. El algoritmo SMQT no es lineal, insensible a la ganancia y polarización y, gracias a él, se puede extraer la estructura de los datos.

ESCOLHAS E DECISÕES: ESTUDO DO PROCESSO PARTICIPATIVO EM ORGANIZAÇÕES DA ECONOMIA SOLIDÁRIA

As últimas décadas, no caso brasileiro, foram marcadas pela predominância da estabilidade econômica e desregulamentação estatal no campo da economia, desconsiderando o impacto na vida das pessoas. Quebras e falências são constatadas como resultado desse processo. Aos trabalhadores surge a oportunidade, com muito esforço, de modelos alternativos nas relações de trabalho. Aparece nesse contexto, o novo discurso da Economia Solidária que preza por práticas autogestionadas. As Empresas Recuperadas são enquadradas dentro desse novo discurso. Entretanto, nas Empresas Recuperadas e nos empreendimentos da Economia Solidária, o espaço fértil proporcionado no campo da subjetividade enfrenta um dilema objetivo. Em sua batalha pela sobrevivência e sustentação, a organização deverá adotar práticas burocráticas e poderá desencantar o espaço da participação. Resulta disso, um dilema entre a objetividade, que a gestão demanda, e a subjetividade que o discurso da Economia Solidária exige. Nessa dissertação, propõe-se que a participação permite um efeito psicológico na medida em que assegura uma inter-relação contínua entre o funcionamento das instituições e as qualidades e atitudes das pessoas que atuam em seu interior. Escolhas e decisões, dessa forma, se colocam como processo que compõe a categoria da participação. Como os trabalhadores das Organizações da Economia Solidária participam do processo de escolhas e decisões em um sistema coletivo e cooperativo de trabalho? Essa é a pergunta central desta pesquisa, que tem por objetivo analisar o processo de escolhas e decisões em organizações da Economia Solidária. Nesse intuito realizou-se um estudo de caso por meio da metodologia da pesquisa-ação de uma empresa recuperada no interior de São Paulo. A pesquisa-ação é um tipo de pesquisa social, com base empírica, que é concebida e realizada em estreita associação com uma ação ou resolução de um problema. Esse problema, no contexto do estudo de caso, foi a concepção de um processo de formação de funcionários para futuros cooperados. A trajetória da discussão foi realizada com acompanhamento de um Grupo Tarefa composto por membros (celetistas e cooperados) da organização. A análise dos resultados foi construída a partir da fundamentação teórica convergindo em três categorias, que compõe o processo de participação, dentro de uma organização da Economia Solidária: Eu comigo (EUCMG), Eu com o(s) outro(s) (EUCOU) e Eu na Organização (EUORG). Os resultados mostram que a Empresa estudada não pode ser considerada como autogestionada e está fundamentada em práticas elitizadas. Há poucas práticas coletivas e se divide em classes internas (chão-defábrica e staff). Contudo, reconhece-se um grande esforço para chegar a uma nova prática de gestão coletiva. A participação se dá dentro de aspectos formais (assembléia) com predominância de assuntos burocráticos que não passaram por apropriação coletiva em sua construção. A educatividade ilumina o caminho processual, rompendo com visões finalísticas e alcançando uma sustentabilidade para a organização.(AU)

ESCOLHAS E DECISÕES: ESTUDO DO PROCESSO PARTICIPATIVO EM ORGANIZAÇÕES DA ECONOMIA SOLIDÁRIA

As últimas décadas, no caso brasileiro, foram marcadas pela predominância da estabilidade econômica e desregulamentação estatal no campo da economia, desconsiderando o impacto na vida das pessoas. Quebras e falências são constatadas como resultado desse processo. Aos trabalhadores surge a oportunidade, com muito esforço, de modelos alternativos nas relações de trabalho. Aparece nesse contexto, o novo discurso da Economia Solidária que preza por práticas autogestionadas. As Empresas Recuperadas são enquadradas dentro desse novo discurso. Entretanto, nas Empresas Recuperadas e nos empreendimentos da Economia Solidária, o espaço fértil proporcionado no campo da subjetividade enfrenta um dilema objetivo. Em sua batalha pela sobrevivência e sustentação, a organização deverá adotar práticas burocráticas e poderá desencantar o espaço da participação. Resulta disso, um dilema entre a objetividade, que a gestão demanda, e a subjetividade que o discurso da Economia Solidária exige. Nessa dissertação, propõe-se que a participação permite um efeito psicológico na medida em que assegura uma inter-relação contínua entre o funcionamento das instituições e as qualidades e atitudes das pessoas que atuam em seu interior. Escolhas e decisões, dessa forma, se colocam como processo que compõe a categoria da participação. Como os trabalhadores das Organizações da Economia Solidária participam do processo de escolhas e decisões em um sistema coletivo e cooperativo de trabalho? Essa é a pergunta central desta pesquisa, que tem por objetivo analisar o processo de escolhas e decisões em organizações da Economia Solidária. Nesse intuito realizou-se um estudo de caso por meio da metodologia da pesquisa-ação de uma empresa recuperada no interior de São Paulo. A pesquisa-ação é um tipo de pesquisa social, com base empírica, que é concebida e realizada em estreita associação com uma ação ou resolução de um problema. Esse problema, no contexto do estudo de caso, foi a concepção de um processo de formação de funcionários para futuros cooperados. A trajetória da discussão foi realizada com acompanhamento de um Grupo Tarefa composto por membros (celetistas e cooperados) da organização. A análise dos resultados foi construída a partir da fundamentação teórica convergindo em três categorias, que compõe o processo de participação, dentro de uma organização da Economia Solidária: Eu comigo (EUCMG), Eu com o(s) outro(s) (EUCOU) e Eu na Organização (EUORG). Os resultados mostram que a Empresa estudada não pode ser considerada como autogestionada e está fundamentada em práticas elitizadas. Há poucas práticas coletivas e se divide em classes internas (chão-defábrica e staff). Contudo, reconhece-se um grande esforço para chegar a uma nova prática de gestão coletiva. A participação se dá dentro de aspectos formais (assembléia) com predominância de assuntos burocráticos que não passaram por apropriação coletiva em sua construção. A educatividade ilumina o caminho processual, rompendo com visões finalísticas e alcançando uma sustentabilidade para a organização.(AU)

Synthesis and characterization of a novel retinylamine analog inhibitor of constitutively active rhodopsin mutants found in patients with autosomal dominant retinitis pigmentosa

Two different mutations of the active-site Lys-296 in rhodopsin, K296E and K296M, have been found to cause autosomal dominant retinitis pigmentosa (ADRP). In vitro studies have shown that both mutations result in constitutive activation of the protein, suggesting that the activated state of the receptor may be responsible for retinal degeneration in patients with these mutations. Previous work has highlighted the potential of retinylamine analogs as active-site directed inactivators of constitutively active mutants of rhodopsin with the idea that these or related compounds might be used therapeutically for cases of ADRP involving mutations of the active-site Lys. Unfortunately, however, amine derivatives of 11-cis-retinal, although highly effective against a K296G mutant of rhodopsin, were without affect on the two naturally occurring ADRP mutants, presumably because of the greater steric bulk of Glu and Met side chains in comparison to Gly. For this reason we synthesized a retinylamine analog one carbon shorter than the parent 11-cis-retinal and show that this compound is indeed an effective inhibitor of both the K296E and K296M mutants. The 11-cis C19 retinylamine analog 1 inhibits constitutive activation of transducin by these mutants and their constitutive phosphorylation by rhodopsin kinase, and it does so in the presence of continuous illumination from room lights.

Feedback Control and Diurnal Regulation of Gibberellin 20-Oxidase Transcript Levels in Potato1

Tuber formation in potato (Solanum tuberosum) is promoted by short photoperiods and is inhibited by gibberellins (GAs). Endogenous levels of GA1 were shown to decrease in stolons and leaves of potato plants induced to tuberize, which suggests that photoperiodic regulation of GA biosynthesis may play a role in tuber induction. We report the isolation of three potato cDNA clones (StGA20ox1–3) encoding GA 20-oxidase, a key regulatory enzyme in the GA-biosynthetic pathway. Using northern analysis, we detected a differential pattern of tissue-specific expression of the mRNAs corresponding to these clones. StGA20ox mRNAs were also very abundant in leaves of the potato ga1 mutant, which is blocked in the 13-hydroxylation step, and were strongly down-regulated by gibberellic acid, suggesting a feedback regulation of these genes. In plants grown in short-day (inductive) conditions, levels of the StGA20ox transcripts in leaves fluctuated during a 24-h period, with a peak of accumulation observed about 4 h after the lights were turned off. Interruption of the night with a 30-min “night break” of light (noninductive conditions) did not have a marked effect on the levels of accumulation of the three GA 20-oxidase mRNAs during the day, but it induced a second peak of expression of StGA20ox1 and StGA20ox3 transcripts late in the night. This observation, together with the finding that StGA20ox1 mRNA is expressed at high levels in leaves, suggests that night-break induction of this gene might play a role in the control of tuberization by regulating endogenous levels of GAs in response to daylength conditions.