Balance de la política fiscal desarrollada en España en época de crisis. ¿Por qué elegir el camino contractivo?

The use of a contractive fiscal policy in times of crisis and austerity can lead to so many different opinion streams which can be, at the same time, very opposite with each other. The high budget deficit in some economies has forced the eurozone to implement austerity policies, meaning that the debate is now more alive than ever. Therefore, the aim of this paper is to analyze the effects of the implementation of a contractive policy during a crisis considering the case of Spain. The positive effects in financial markets were noticed due to the decrease of the risk premium and the payment of interests, and also thanks to the increase of trust towards Spain. This way, the reduction of the Spanish deficit was remarkable but in any case there is still a long path until reaching the limit of 3% of the GDP. Also, in the short run it is possible to see that the consolidation had contractive effects in the economic activity but, in the long run, the debate is among the defenders of the fact that austerity is followed by a growing period and the ones opposing to it due to the drowning effect produced by it.

Del INI a la SEPI, la empresa pública en España durante la segunda mitad del siglo XX

Lan honekin historiako garai ezberdinek, batez ere XX. mendeko bigarren erdikoa, enpresa publikoaren gain izandako eragina ikusi nahi izan da. Horrez gain, sektore batzuetan enpresa publikoaren jarduera eta horietan lortu zituen emaitzak aztertu nahi izan dira. Beraz, helburua Espainiako enpresa publikoaren historia ikustea izan da. Horregatik, lehenengo enpresa publikoaren definizioa eta aurrekariak (XVIII. eta XIX. mendeak) azaldu dira eta, horren ondoren, XX. mendea aztertu da. Horretarako, XVIII. errege fabrikak eta pribilegiodun merkatal konpainia batzuk eta XIX. mendeko liberalismoak horien gain izandako eragina ikusi da. XX. mendeari dagokionez, ikusi denez, gutxienez bigarren erdian, INI-a izan zen garrantzia gehien izan zuen erakundea eta horregatik, bere jarduera eta politiken bilakaera aztertu da batez ere. Horrez gain, INI-a desagertu arte sortutako beste bi erakunde ikusi dira INH eta TENEO. Azkenik, INI-a ordezkatu zuten AIE eta SEPI erakundeak ikusi dira.

Discriminación salarial de género en España

A pesar de la existencia de numerosas normas internacionales y legislación que prohíben la discriminación por motivo de género, la brecha salarial entre hombres y mujeres es un hecho constatable. En este trabajo fin de grado se estudia el caso de España, poniendo especial énfasis en la medición de la desigualdad salarial por razón de sexo. Y se propone un sistema retributivo basado en la gestión por competencias como un factor que puede contribuir a reducir dicha brecha salarial.

Evolución de las políticas de ayuda a la vivienda en España.

En el presente trabajo se estudia la evolución del gasto público en la política de vivienda en España. La política de vivienda constituye una parte más de la Economía del Bienestar, aunque no ha recibido la misma atención que otros de sus componentes, como la salud, la educación o las pensiones. Comenzaremos situando a España en el contexto europeo y observaremos como los efectos de la crisis internacional han afectado de manera significativa a las partidas de gasto de este bien. Conoceremos cuáles son los principales objetivos e instrumentos de la política de vivienda en España y analizaremos la evolución de la misma. De este modo, se detallarán los Planes de Vivienda que se han ido elaborando desde comienzos del siglo XX hasta nuestros días. A continuación, evaluaremos la situación en la que nos encontramos en base a algunas características del mercado de vivienda. Para finalizar, se cierra el trabajo estableciendo una serie de conclusiones breves y unas posibles propuestas de mejora o posibles caminos a seguir.

Los Gastos Fiscales en España en los últimos años.

En este trabajo se realiza un análisis de los gastos fiscales en España durante los últimos 10 años. Para ello se parte de la definición y características de estos pasando por sus ventajas e inconvenientes, sus tres métodos de estimación del mismo y el utilizado en España, contextualizándolo en el marco legal básico del que emana los Presupuestos Generales del Estado. Continuamos abordando los gastos fiscales a través de tres puntos de vista diferentes: Presupuestario, donde se analizan los gastos fiscales a través de los Beneficios Fiscales y del Presupuesto de Ingresos. Por Políticas de Gasto, donde estos son analizados a través de las políticas a los que son destinados dichos gastos. Y finalmente, desde el punto de vista Impositivo, donde se analizan a través de cada impuesto individualmente en que elemento del impuesto se recogen dichos Beneficios Fiscales relacionándolos con las políticas de gasto a los que son destinados.

La Ley de Okun: cumplimiento y estabilidad para el caso de España

Ante la importancia que se ha otorgado a las sucesivas reformas tendentes a flexibilizar el mercado de trabajo en España cada vez que la tasa de paro ha alcanzado niveles muy elevados, en este estudio se plantea la cuestión fundamental de si tales reformas han contribuido a reducir la respuesta de la tasa de paro a los cambios en el ciclo económico; o en otros términos a que el ajuste del mercado de trabajo ante los cambios del ciclo se produzca en menor medida sobre cantidades (empleo/paro) y, por tanto, en mayor medida sobre precios (salarios). La respuesta a esta cuestión se puede fundamentar en el análisis de la Ley de Okun para el caso español, comprobando su cumplimiento y aproximando los efectos de las reformas por la estabilidad en el tiempo del “coeficiente” de Okun. Para ello se realiza un análisis econométrico entre 1975 y 2013 que permita comprobar si el coeficiente experimenta variaciones especialmente significativas considerando las reformas laborales que comprende. Finalmente, dada su estabilidad, se realiza una revisión en base a ella de las previsiones del Gobierno para los próximos años, y comprobar si se puede predecir la evolución de la tasa de paro.

El sector económico de las mascotas en españa y su impacto en el PIB y la creacion de empleo

El principal objetivo de este Trabajo de Fin de Grado titulado “El sector económico de las mascotas en España y su impacto en el PIB y en la creación de empleo” es intentar dar a conocer a la sociedad el peso que tienen las mascotas en la economía en general y en la española en particular. Para comenzar el trabajo, analizamos los comienzos de la domesticación así como la historia y la importancia de los animales de compañía para el ser humano desde el punto de vista social y económico. Para visualizar el impacto económico de los animales de compañía nos centramos en los dos subsectores más relevantes desde la perspectiva del empleo y del impacto en el PIB: la alimentación y las prestaciones veterinarias. En lo que respecta a la alimentación, se analiza la producción en toneladas y euros así como la estructura de las empresas más relevantes y un análisis del líder en el sector. En cuanto al sector veterinario, se analiza su estructura en toda España en términos de empleo, número de empresas y resultados económicos. A lo largo del trabajo podemos observar que el sector de los animales de compañía se mantiene en continuo crecimiento debido al mayor número de animales domésticos que encontramos en los hogares. Para finalizar el desarrollo del Trabajo de Fin de Grado, elaboramos unas conclusiones en relación a los resultados más relevantes obtenidos en la realización de este estudio.

Code conversion from signed-digit to complement representation based on look-ahead optical logic operations

We present, for the first time to our knowledge, a generalized lookahead logic algorithm for number conversion from signed-digit to complement representation. By properly encoding the signed-digits, all the operations are performed by binary logic, and unified logical expressions can be obtained for conversion from modified-signed-digit (MSD) to 2's complement, trinary signed-digit (TSD) to 3's complement, and quarternary signed-digit (QSD) to 4's complement. For optical implementation, a parallel logical array module using an electron-trapping device is employed and experimental results are shown. This optical module is suitable for implementing complex logic functions in the form of the sum of the product. The algorithm and architecture are compatible with a general-purpose optoelectronic computing system. (C) 2001 Society of Photo-Optical Instrumentation Engineers.

Grating-encoded multichannel photorefractive incoherent-to-coherent optical conversion

A dynamic multichannel incoherent-to-coherent optical converter based on the photorefractive effect of SBN:Ce is described. A number of grating-encoded input images, illuminated by incoherent light, are projected onto the crystal to yield photoinduced phase gratings. Coherent positive replicas of these images are simultaneously reconstructed by a coherent read beam. A simple theoretical description of this converter and corresponding experimental results are presented.

Cuantificación del efecto de la ley antitabaco de 2011 en España

En este trabajo se propone un modelo econométrico para las ventas de cigarrillos y se estima el mismo para el periodo 2005:1- 2013:4. Los resultadosmuestran una demanda inelástica respecto al precio y elástica con respecto a la renta. Una característica importante de la serie es la reducción escalonada del consumo de cigarrillos y el efecto casi marginal de la ley antitabaco 42/2010 en el descenso del consumo.

Wavefront conversion by local volume holograms between cylindrical and plane waves with reconstruction at a different readout wavelength

Based on the two-dimensional coupled-wave theory, the wavefront conversion between cylindrical and plane waves by local volume holograms recorded at 632.8 nm and reconstructed at 800 nm is investigated. The proposed model can realize the 90 degrees holographic readout at a different readout wavelength. The analytical integral solutions for the amplitudes of the space harmonics of the field inside the transmission geometry are presented. The values of the off-Bragg parameter at the reconstructed process and the diffracted beam's amplitude distribution are analysed. In addition, the dependences of diffraction efficiency on the focal length of the recording cylindrical wave and on the geometrical dimensions of the grating are discussed. Furthermore, the focusing properties of this photorefractive holographic cylindrical lens are analysed.

Anomalous electric dipole internal conversion

Electric dipole internal conversion has been experimentally studied for several nuclei in the rare earth region. Anomalies in the conversion process have been interpreted in terms of nuclear structure effects. It was found that all the experimental results could be interpreted in terms of the j ∙ r type of penetration matrix element; the j ∙ ∇ type of penetration matrix element was not important. The ratio λ of the El j ∙ r penetration matrix element to the El gamma-ray matrix element was determined from the experiments to be:

Lu¹⁷⁵,396 keV, λ = - 1000 ± 100;

282 keV, λ = 500 ± 100;

144 keV, λ = 500 ± 250;

Hf¹⁷⁷, 321 keV λ = - 1400 ± 200;

208 keV λ = - 90 ± 40;

72 keV |λ| ≤ 650;

Gd¹⁵⁵, 86 keV λ = - 150 ± 100;

Tm¹⁶⁹, 63 keV λ = - 100 ± 100;

W¹⁸², 152 keV, λ = - 160 ±80;

67 keV, λ = - 100 ± 100.

Predictions for λ are made using the unified nuclear model.

SteelConverter and Caltech VirtualShaker: Rapid Nonlinear Cloud-Based Structural Model Conversion and Analysis

STEEL, the Caltech created nonlinear large displacement analysis software, is currently used by a large number of researchers at Caltech. However, due to its complexity, lack of visualization tools (such as pre- and post-processing capabilities) rapid creation and analysis of models using this software was difficult. SteelConverter was created as a means to facilitate model creation through the use of the industry standard finite element solver ETABS. This software allows users to create models in ETABS and intelligently convert model information such as geometry, loading, releases, fixity, etc., into a format that STEEL understands. Models that would take several days to create and verify now take several hours or less. The productivity of the researcher as well as the level of confidence in the model being analyzed is greatly increased.

It has always been a major goal of Caltech to spread the knowledge created here to other universities. However, due to the complexity of STEEL it was difficult for researchers or engineers from other universities to conduct analyses. While SteelConverter did help researchers at Caltech improve their research, sending SteelConverter and its documentation to other universities was less than ideal. Issues of version control, individual computer requirements, and the difficulty of releasing updates made a more centralized solution preferred. This is where the idea for Caltech VirtualShaker was born. Through the creation of a centralized website where users could log in, submit, analyze, and process models in the cloud, all of the major concerns associated with the utilization of SteelConverter were eliminated. Caltech VirtualShaker allows users to create profiles where defaults associated with their most commonly run models are saved, and allows them to submit multiple jobs to an online virtual server to be analyzed and post-processed. The creation of this website not only allowed for more rapid distribution of this tool, but also created a means for engineers and researchers with no access to powerful computer clusters to run computationally intensive analyses without the excessive cost of building and maintaining a computer cluster.

In order to increase confidence in the use of STEEL as an analysis system, as well as verify the conversion tools, a series of comparisons were done between STEEL and ETABS. Six models of increasing complexity, ranging from a cantilever column to a twenty-story moment frame, were analyzed to determine the ability of STEEL to accurately calculate basic model properties such as elastic stiffness and damping through a free vibration analysis as well as more complex structural properties such as overall structural capacity through a pushover analysis. These analyses showed a very strong agreement between the two softwares on every aspect of each analysis. However, these analyses also showed the ability of the STEEL analysis algorithm to converge at significantly larger drifts than ETABS when using the more computationally expensive and structurally realistic fiber hinges. Following the ETABS analysis, it was decided to repeat the comparisons in a software more capable of conducting highly nonlinear analysis, called Perform. These analyses again showed a very strong agreement between the two softwares in every aspect of each analysis through instability. However, due to some limitations in Perform, free vibration analyses for the three story one bay chevron brace frame, two bay chevron brace frame, and twenty story moment frame could not be conducted. With the current trend towards ultimate capacity analysis, the ability to use fiber based models allows engineers to gain a better understanding of a building’s behavior under these extreme load scenarios.

Following this, a final study was done on Hall’s U20 structure [1] where the structure was analyzed in all three softwares and their results compared. The pushover curves from each software were compared and the differences caused by variations in software implementation explained. From this, conclusions can be drawn on the effectiveness of each analysis tool when attempting to analyze structures through the point of geometric instability. The analyses show that while ETABS was capable of accurately determining the elastic stiffness of the model, following the onset of inelastic behavior the analysis tool failed to converge. However, for the small number of time steps the ETABS analysis was converging, its results exactly matched those of STEEL, leading to the conclusion that ETABS is not an appropriate analysis package for analyzing a structure through the point of collapse when using fiber elements throughout the model. The analyses also showed that while Perform was capable of calculating the response of the structure accurately, restrictions in the material model resulted in a pushover curve that did not match that of STEEL exactly, particularly post collapse. However, such problems could be alleviated by choosing a more simplistic material model.

Nuclear structure effects in internal conversion

Experimental studies of nuclear effects in internal conversion in Ta¹⁸¹ and Lu¹⁷⁵ have been performed. Nuclear structure effects (“penetration” effects), in internal conversion are described in general. Calculation of theoretical conversion coefficients are outlined. Comparisons with the theoretical conversion coefficient tables of Rose and Sliv and Band are made. Discrepancies between our results and those of Rose and Sliv are noted. The theoretical conversion coefficients of Sliv and Band are in substantially better agreement with our results than are those of Rose. The ratio of the M1 penetration matrix element to the M1 gamma-ray matrix element, called λ, is equal to + 175 ± 25 for the 482 keV transition in Ta¹⁸¹ . The results for the 343 keV transition in Lu¹⁷⁵ indicate that λ may be as large as – 8 ± 5. These transitions are discussed in terms of the unified collective model. Precision L subshell measurements in Tm¹⁶⁹ (130keV), W¹⁸² (100 keV), and Ta¹⁸¹ (133 keV) show definite systematic deviations from the theoretical conversion coefficients. The possibility of explaining these deviations by penetration effects is investigated and is shown to be excluded. Other explanations of these anomalies are discussed.